Quanta Computer NH2 Smart Stick User Manual

Quanta Computer Inc Smart Stick Users Manual

Contents

Users Manual

Quad Core 10SpecificationsMicro USB ( Power input )Micro SDHDMIPower ButtonUSB 2.0Technical Support LineLED ( Power ) Quanta Compute StickProduct ManualProduct InterfaceService WarrantyPackage ContentsAdapter USB cable HDMI cablePower cableUSBUSBMicro USBwireless keyboard/mouse(Self-contained)(Genuine Accessories)HDMI cableSupport Bluetooth keyboards/mouse(Genuine Accessories)Product ManualProduct Manual1. Connect the HDMI to the corresponding port on the television (use in conjunction with the HDMI     extension cord if the distance between the product and the television exceeds the length of the     HDMI cable) and select the appropriate [Video Input Source]     (i.e., the HDMI input channel) on the display (e.g., TV, monitor, projector).2. USB Power Supply: Connect the Micro USB on one end of the power cable to the product and     USB to the corresponding voltage transformer.3. The product supports Bluetooth or USB wireless keyboards and mouse.4. Press “Power” to activate the system.Remark:1.Without permission granted by the NCC, any    company, enterprise, or user is not allowed to    change frequency, enhance transmitting power,    or alter original characteristic as well as    performance to an approved low power    radio-frequency devices.2.The low power radio-frequency devices shall not    influence aircraft security and interfere legal    communications; If found, the user shall cease    operating immediately until no interference is    achieved. The said legal communications means    radio communications is operated in compliance    with the Telecommunications Act. The low power    radio-frequency devices must be susceptible with    the interference from legal communications or    ISM radio wave radiated devices.3.The CMOS on the motherboard draws power    from a micro battery placed in the product.    Please do not attempt to replace this battery.    Replacing the battery with an incompliant battery    may lead to hazards. Please dispose the old    battery appropriately.Thank you for your purchase. A service fee may be charged in the following situations:   Improper handling of the product without    referencing the product manual.   Damages due to human error, computer viruses,   humidity, improper software installation,    or self-disassembly/assembly.   Damages due to unforeseen disasters and    circumstances, such as fires, floods, typhoons,    and earthquakes, etc.   Damage to accessories, consumables, and    natural wear-and-tear.   Specific requests to reinstall software or adjust    computer settings, where a service fee shall    incur.   Damaged or dirty warranty labels that are    unrecognizable.Please back up all personal information and files prior to serving your product as the maintenance process may influence the integrity of your information.Intel Atom Z8300CPU OSMemoryStorageExpansionDisplayWirelessPortInputPowerWiFi 802.11 B/G/N ;BT 4.0USB 2.0 x 1Micro USBHDMIMicro SD , Max 64GB32GB eMMC2GB DDR3Windows 105V/2A    Compute Stick  Fed er al  Co mmunication  Commission Interference Statement   This  device  complies with  Part  15  of  the FCC Rules. Operation is  subject to the following two conditions: (1) This device  may  not cause  harmful interference,  and  (2)  this  device  must  accept  any interference received, including interference that may cause undesired operation.   This equipment has been tested and found to comply with the  limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed  to provide  reasonable protection against harmful interference in a residential installation. This equipment  generates,  uses  and  can  radiate  radio frequency  energy and, if not installed and  used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If  this equipment does cause harmful interference to radio or television reception, which can  be determined by turning the equipment interference by one of the following measures:   Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on  a to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help.   FCC Caution:Any changes or modications not  expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This  transmitter  must not be  co-located  or operating in conjunction with any  other antenna or transmitter.Operations  in  the  5.15-5.25GHz  band  are restricted to indoor usage only. FOR MOBILE DEVICE USAGE (>20cm/low power) Radiation Exposure Statement: This equipment complies with FCC radiation exposure  limits  set  forth  for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.  FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES) Note: The country code selection is for non-US model only and is not available to all US model. Per FCC to US operation channels only. Industry Canada statement This device  complies  with  Industry  Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1)  this device may not cause interference, and 2)  this  device  must  accept  any  interference, including  interference  that  may  cause  undesired operation of the device.Le  présent appareil  est  conforme  aux  CNR d’Industrie  Canada applicables aux appareils radio exempts  de  licence.  L’exploitation  est autorisée  aux deux conditions suivantes: 1)  l’appareil ne doit pas produire de brouillage, et 2)  l’utilisateur de  l’appareil  doit  accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.This Class B digital apparatus  complies with Canadian ICES-003.Cet  appareil  numérique  de  la  classe  B  est conforme à la norme NMB-003 du Canada.This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.Cet  appareil  est  conforme  à la  norme  RSS-310  d’Industrie  Canada.  L’opération est soumise à la condition que  cet appareil  ne provoque aucune interférence nuisible.This  device  and its  antenna(s)  must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. Cet appareil et son antenne ne doivent pas être situés ou  fonctionner en conjonction avec une  autre antenne ou  un autre  émetteur, exception faites des radios intégrées qui ont été testées. The County Code Selection feature is disabled for products marketed in the US/ Canada.La fonction de sélection de l’indicatif du pays est désactivée pour les produits  commercialisés aux États-Unis et au Canada.   FOR MOBILE DEVICE (>20cm from body / low power)  Radiation Exposure Statement: This  equipment  complies with  IC radiation exposure  limits  set  forth  for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.  Déclaration d’exposition aux radiations:Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Navigation menu