Quanta Computer P550 Clover Station Printer User Manual Clover QSG GoldenOakDesign 171024 PRODUCTION

Quanta Computer Inc Clover Station Printer Clover QSG GoldenOakDesign 171024 PRODUCTION

Users Manual

FCC Part 15This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation.FCC Part 15 Class B-specificNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.FCC WarningChanges or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. Radiation Exposure StatementThis equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Clover Network, Inc.415 N Mathilda Ave, Sunnyvale, CA 94085, USAEU Declaration of ConformityHereby, Clover Network. Inc. declares that the radio equipment type, C500 & P550 are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:help.clover.com/eu-complianceThe frequency band and the maximum transmitted power in EU are listed below:WLAN (C500)2400MHz - 2483.5MHz: 19.5 dBm (EIRP)5150MHz – 5250MHz: 21 dBm (EIRP)5250MHz – 5350MHz: 21.5 dBm (EIRP)5470MHz – 5725MHz: 22 dBm (EIRP)NFC (P550)NFC is only turned on within 60s when the contactless payment will be made and its max. power is 26 dBuA/m at 3m.Restrictions in AT/BE/BG/CZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/CY/LV/LI/LT/LU/HU/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/UK/HR. 5150MHz-5350MHz is for indoor use only.Caution: Exposure to Radio Frequency RadiationThis equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.Tablet: Model: C500FCC ID: HFS-C500Printer (Optional): Model: P500EU ImporterMarketplace Merchant Solutions LtdUnit 9, Richview Office Park, Clonskeagh, Dublin 14, IrelandWaste Electrical and Electronic Equipment-WEEENOTE: This product is covered electronic equipment under the European Union’s Waste from Electrical and Electronic Equipment (“WEEE”) Directive (2012/19/EU). The WEEE Directive requires that covered equipment be collected and managed separately from typical household waste in all EU member states. Please follow the guidance of your local environmental authority or ask the shop where you purchased the product for collection or recycling options.Printer: Model: P550FCC ID: HFS-P550Clover StationQuick Start GuideKurzanleitung • Instructions de démarrageGuía de inicio rápido • Guida introduttiva
U.S.A: clover.com/setupEurope: eu.clover.com/setup5v/2A 5v/1A12123456Press power button until Clover logo appears.Einschalttaste gedrückt halten bis Clover logo erscheint.Tenere premuto il tasto di alimentazione fino a quando non compare il logo Clover.Presione el botón de encendido hasta que el logo de Clover aparezca.Appuyez sur le bouton d’alimentation jusqu'à ce que le logo Clover s'affiche.

Navigation menu