Quanta Computer QD8 Portable Router User Manual BF 01C
Quanta Computer Inc Portable Router BF 01C
Contents
- 1. manual
- 2. user manua
- 3. user manual
manual
BF-01C User Manual Introduction Installing the BF-01C Wireless Connection to the BF-01C Internet Connection Settings Use Overseas Troubleshooting Appendix Thank you for purchasing the BF-01C. This manual describes product installation and its default settings. It also provides troubleshooting information. Please always read this manual before using the product. 1 Introduction Main Features This section describes the main product features. • Supports NTT Docomo ”Xi”. (When receiving: Max. 37.5 Mbps; When sending: Max. 12.5 Mbps) ※ The communication speeds are the maximum values in sending and receiving standards. However, these do not indicate actual communication speeds. Data transmission is provided over a best-effort network. For that reason, actual communication speeds may vary according to the communication environment and the traffic load on the network. ※ When outside of the Xi area, this can also be used in a FOMA high-speed area (when receiving: Max. 7.2 Mbps; when sending: Max. 5.7 Mbps). • The Internet connection automatically switches in public wireless LAN areas, such as Mzone, from the Xi line or FOMA line to the public wireless LAN. • The included cradle provides a wired port connection, and recharges the product. • Connects up to 10 wireless LAN devices, such as personal computers and game consoles. • Connects to wireless LAN devices with one touch using AOSS or WPS. Operating Environment This section describes the product operating environment. Supported Devices iPad, iPod touch, game console (Nintendo 3DS™, Nintendo DS®, PSP® ”PlayStation Portable”), and devices that support wireless LAN. Supported OS (Personal Computers) Windows 7 (32 bit/64 bit), Vista (32 bit/64 bit), XP (32 bit), Mac OS X (10.4/10.5/10.6) ※ Supports Windows 7 Starter/Home Premium/Professional/Ultimate. ※ Supports Windows Vista Home Basic/Home Premium/Business/Ultimate. ※ Windows XP must have Service Pack 3 or later installed. Supported Browsers Internet Explorer 6/7/8/9 Firefox 3.5/3.6/4 Nintendo DS Browser, Nintendo DSi Browser PSP® Internet Browser Internet Explorer Mobile (Windows Mobile 6.x) Opera Mobile 9/10 Safari 3/4/5 (Mac OS/iPod touch) ※ To change the product's settings, or to check the setting contents, use Internet Explorer 6/7/8/9, or Firefox 3.5/3.6/4 (Windows 7/Vista/XP). Browsers provided in game console or cell phones cannot implement all product settings. Main Unit Accessories Before using this product, check that all of the accessories are included. Mobile Wi-Fi Router (BF-01C) Unit (Rear Cover BF01C, Includes Warrantee) Desktop Cradle BF01C (Includes Warrantee) AC Adapter BF01 (Includes Warrantee) Battery Pack BF01 USB Cable BF01 LAN Cable (Free Sample) User Manual (This Manual) Mobile Device Connection Guide Note If separate, additional information is included, refer to that. Part Names and Functions Front Panel 1. WIRELESS LED Glowing (light blue) Glowing (purple) Glowing (blue) Glowing (green) Glowing (red) Glowing (yellow) Flashing (light blue) Flashing (purple) Flashing (blue) Flashing (green) Off 2. BATTERY LED Glowing (blue) Glowing (green) Glowing (red) Flashing (red) Glowing (yellow) Off When in Xi area When in FOMA international roaming area When in FOMA area When in wireless LAN area When outside of Xi area, FOMA line and wireless LAN area, and when not connected to wired Internet When in power saving mode When communicating on Xi line When communicating on FOMA international roaming line When communicating on FOMA line When communicating on wireless LAN When connected to wired Internet Battery capacity is 50% or higher Recharging is completed and the power is turned on Battery capacity is 50 - 25% Battery capacity is 25 - 10% Battery capacity is 10% or lower Recharging Recharging is completed and the power is turned off ※ Battery capacity is a general indicator. 3. AOSS/DIAG LED Glowing (yellow) : S ecurity key exchange succeeds (AOSS/ WPS succeeds)/Wireless LAN security setting completed Flashing Two Times (blue) : This product can exchange security keys. (LAN Side: AOSS/WPS Idling) (Internet Side: AOSS Idling) *1 Continuous Flashing (blue) : Failed to exchange security keys (AOSS/WPS failed) Flashing (red) : The number of flashes indicates the status of the product. Off : Wireless LAN security is not set. Flashing (red) status Content Status Continuous Flashing *2 • Booting up system • Updating the firmware • Saving settings • Initializing • Accessing internal storage region Flashing Three Times *3 Wired LAN Error Wired LAN controller is malfunctioning. Flashing Four Times *3 Wireless LAN error Wireless LAN controller is malfunctioning. Flashing Five Times IP Address Setting Error Communication is not possible because the network addresses are the same on the Internet side and the LAN side. Change the product's LAN-side IP address setting. Flashing Six Times Temperature Error The internal product temperature is high. Turn the power to the product off and allow it to cool for a while before using it. *1 Devices idling with AOSS switch to flashing two times (yellow) when detected by the Internet side of the product. *2 Do not turn off the power when the device is continuously flashing. Doing so can damage it. *3 When the AC adapter is disconnected from the device, turn off the power to it, and remove the battery pack. Return the battery pack to its original position after waiting for a while. Side Panel 4. Power Button When the power is off, hold down the power button for approximately three seconds to turn the power on. When operating this device, hold down the power button for approximately three seconds to turn the power off. 5. AOSS Button When the power is on, hold down the button (for approximately three seconds) until the AOSS/DIAG LED flashes in blue to enter a status (AOSS operating status) where security keys can be exchanged. 6. Strap Hole Attaches commercially available straps. 7. Cradle Connector Connects the included cradle. 8. Mini USB Connector Connects the included AC adapter or a USB cable. Back Side Panel 11 10 12 9. Default Value Label Lists this unit’s SSID (default value) and encryption key (default value) and the like. 10. Battery Box Holds the included battery pack. 11. UIM Card Slot For inserting a Docomo UIM card. ※ This device does not support the use of FOMA cards. If you have a FOMA card, please replace it from your Docomo vendor. 12. RESET Switch When the power to this device is on, hold down the RESET button (for approximately three seconds) until the AOSS/DIAG LED flashes in red to initialize the settings. Cradle Front Side 13 14 15 13. LAN LED Glowing (green) Off When the wired port is set as the LAN port When the wired port is set as the INTERNET port 14. LINK/ACT LED Glowing (green) Flashing (green) When the wired port is linked When the wired port is communicating 15. POWER LED Glowing (green) When the included AC adapter is connected Cradle Top 16 16. Cradle Connector Connects the main unit's cradle connector. Cradle Back Side 17 18 19 17. POWER Connector Connects the included AC adapter. 18. Wired Port Switch to operate this as the LAN port or the INTERNET port by using the onoff switch. 19. On-off Switch Switch to use the wired port either as the LAN port or the INTERNET port. 10 2 Installing the BF-01C Power ON/OFF Turn the power ON/OFF using the power button. Power Button When the power is off, hold down the power button for approximately three seconds to turn the power on. When operating this device, hold down the power button for approximately three seconds to turn the power off. Note In the default setting, if no wireless device is connected to the product for approximately one minute, it will automatically switch to standby mode. Operations such as connecting to the Internet do not work while the unit is in standby mode. But the system will recover to its normal operating status either by pressing the power button or by connecting a wireless device to the product. However, the system will not shift to standby mode while power is being supplied or when it is connected to a wired port. 11 3 Wireless Connection to the BF-01C Wireless Connection to a Personal Computer This section describes the procedures for connecting this product wirelessly to a personal computer running Windows, using AOSS/WPS (push-button type) as an example. Setting methods vary according to the version of Windows that is running. Note Refer to the Reference Guide for details on other connecting methods. See page 58 in this manual on reference method. For Windows 7/Vista Follow the procedure below to connect to this device using AOSS/WPS (push-button type) on a personal computer running Windows 7 or Vista. Note In setting AOSS/WPS (push-button type), the personal computer and this device establish a 1-to-1 relationship. For that reason, you cannot connect another device with AOSS/WPS (push-button type) while it is being set. To connect multiple devices to one BF-01C unit, connect another device after completing the AOSS/WPS (push-button type) connection. 12 Select [Start] - [(All) Programs] - [BUFFALO] - [AirStation Utility] [Client Manager V]. 2 When the screen below is displayed, click [Create connection destination]. When the ”User Account Control” screen is displayed, click [Yes] or [Continue]. 13 4 Click the automatic security setting button the screen. When the screen below is displayed, hold down the AOSS button for approximately 2 seconds until the AOSS/DIAG LED flashes. Release the button when the LED flashes. displayed in ※ The product image in the screen is an example. The product and AOSS button position may differ from your system, so check the position of the button in advance. 14 Hold down the AOSS button until the AOSS/DIAG LED flashes twice in blue. AOSS/DIAG LED The device is automatically detected, and connected. ※ The product image in the screen is an example. 15 7 Wait for the connection to complete. ※ The product image in the screen is an example. When ”Connection with AOSS completed” or ”Connection with WPS push-button type completed” is displayed, check the name of the connection destination, and click [Save and close]. Note The connection destination name can be freely set. 16 9 When ”Wireless connection destination creation completed” is displayed, click [Close]. 10 If a screen ”Set Network Location” is displayed, click the location that matches the environment where the devices will be used. (In the example here, click ”Home Network”.) 17 11 If the ”User Account Control” screen is displayed, click [Yes] or [Continue]. 12 If the screen below is displayed, click [Close]. This completes connecting to this product. Note If connecting to this device fails, the AOSS/DIAG LED will continuously flash in blue for approximately 30 minutes, and a screen like the one below is displayed. In such case, click ”Start creating wireless connection from the beginning” and implement the procedures again from step 4 (Page14). ※ Sample screen. 18 4 Troubleshooting Initializing the Settings Use the following procedures to initialize the settings (Reset). Check that the power to the device is on. Remove the back side cover. Hold down the RESET button (for approximately three seconds) until the AOSS/DIAG LED flashes in red. RESET Button After about one minute, check that the AOSS/DIAG LED is lit in yellow. This completes initialization of this product. 19 5 Appendix Product Specifications Main Unit/Cradle Wireless Compliance Interface Standards (LAN Side) Maximum Data Transfer Speed (Theoretical Value) IEEE802.11b / IEEE802.11g / IEEE802.11n ARIB STD-T66 (IEEE802.11b/g) IEEE802.11b 11Mbps IEEE802.11g 54Mbps IEEE802.11n 150Mbps Mode Access Point (AP) Mode Frequency Range 2412 - 2472 MHz 1 - 13 channels No. of Ports 1 Port * When being used overseas (international roaming), the range is restricted to 2412 - 2462MHz and 1 - 11 channels. * Basically, signals do not cross-talk (or interfere) with those of other devices, such as cell phones, cordless telephones, televisions, radios and the like, but if these devices are wireless with a 2.4 GHz band, there is the possibility that cross-talk can occur. No. of Devices 10 Devices That Can Be Connected Simultaneously Security 20 WPA2-PSK (TKIP/AES), WPA-PSK (TKIP/AES), WPA/ WPA2 mixed PSK (TKIP/AES mixed mode), WEP (64bit/128bit) privacy separator, ANY connection rejection, MAC access restrictions (up to 16 devices) Wireless Interface (Internet Side) Compliance Standards IEEE802.11a / IEEE802.11b / IEEE802.11g / IEEE802.11n ARIB STD-T71 (IEEE802.11a) ARIB STD-T66 (IEEE802.11b/g) Maximum Data Transfer Speed (Theoretical Value) IEEE802.11a 54Mbps IEEE802.11b 11Mbps IEEE802.11g 54Mbps IEEE802.11n 150Mbps * IEEE802.11a cannot be used when the device is set for international roaming. Mode Station (STA) Mode Frequency Range 5 GHz Band W52 36/40/44/48 channels (5180 - 5240MHz) W53 52/56/60/64 channels (5260 - 5320MHz) 2.4 GHz Band 1 - 13 channels (2412 - 2472MHz) * When the device is being used overseas (international roaming), the range is restricted to 2412 - 2462MHz and 1 - 11 channels. Also, cannot be used in 5GHz band. * Basically, signals do not cross-talk (or interfere) with those of other devices, such as cell phones, cordless telephones, televisions, radios and the like, but if these devices are wireless with a 2.4 GHz band, there is the possibility that cross-talk can occur. No. of Ports 1 Port Security WPA2-EAP (TKIP/AES), WPA-EAP (TKIP/AES), WPA2PSK (TKIP/AES), WPA-PSK (TKIP/AES), WPA/WPA2 mixed PSK (TKIP/AES mixed mode), 802.1X/EAP (WEP), WEP (64bit/128bit) 21 Mobile Interface Compliance Standards LTE (Cat.3) / W-CDMA (R99) / HSDPA (Cat.8) / HSUPA (Cat.6) Maximum Data Transfer Speed (Theoretical Value) LTE 75Mbps W-CDMA 384kbps HSDPA 7.2Mbps HSUPA 5.7Mbps * LTE cannot be used when the device is set for international roaming. Cradle Frequency Range Band I 2100 MHz UP : 1920 - 1980 MHz Down : 2110 - 2170 MHz Band V 850 MHz UP : 824 - 849 MHz Down : 869 - 894MHz Band VI 800 MHz UP : 830 - 840 MHz Down : 875 - 885MHz No. of Ports 1 Port Compliance Standards IEEE802.3u (100BASE-TX) IEEE802.3 (10BASE-T) Maximum Data 10/100 Mbps (Automatic Recognition) Transfer Speed (Theoretical Value) No. of Ports 22 1 Port (Supports AUTO-MDIX) Supported UIM Card Docomo UIM Card Other Unit External Interfaces Mini USB (Supports USB 1.1/2.0) x 1 Built-in Flash Region Approximately 15 GB Power AC100V ±10% 50/60Hz (When using AC adapter) BF-01C Dedicated Battery (When using battery pack) Power Consumption At maximum communication 2.5 W At general communication 1.0 W When in standby 0.22 W Continuous When Communi- Communicating cation Time When in LTE Communication Approximately 4 Hours When in 3G communication Approximately 6 Hours * Operating times vary according to the environment of use. When in Standby Approximately 30 Hours * Operating times vary according to the environment of use. Operating Environment Temperature: 0 - 35°C Humidity: 10 - 85% (no condensation) External Main Unit Dimensions Cradle Approximately 95.0 (W) x 64.4 (H) x 17.4 (D) mm Weight Main Unit Approximately 127 g (When battery pack is installed) Cradle Approximately 35g Approximately 64.3 (W) x 21.2 (H) x 48.3 (D) mm Software licensed by GNU General Public License (GPL) or GNU Lesser General Public License (LGPL) is included with this product. For details on this software, see NTT's homepage (http://www.nttdocomo.co.jp/). Battery Pack Part Name Battery Pack BF01 Battery Type Lithium-ion Battery Nominal Voltage DC 3.7 V Nominal Capacity 1880 mAh AC Adapter Part Name AC Adapter BF01 Input AC100 - 240V 50/60Hz 11.2 - 14.8VA Output DC 5 V 1 A 23 Export Administration Regulations This product and its accessories may be subject to Japan's Export Administration Regulations (Foreign Exchange and Foreign Trade Control Law). It also may be subject to American Re-exporting Regulations (Export Administration Regulations). To export or re-export this product and its accessories, use the necessary procedures at your own responsibility and cost. For details on procedures, please contact the Ministry of Economy, Trade and Industry or the U.S. Department of Commerce. Regulatory Information Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 24 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: For body worn operation, this device has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the device a minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. SAR information: 0.181 W/Kg (1g) 25 CE Marking This device has been tested to and conforms to the regulatory requirements of the European Union and has attained CE Marking. The CE Mark is a conformity marking consisting of the letters ”CE”. The CE Mark applies to products regulated by certain European health, safety and environmental protection legislation. The CE Mark is obligatory for products it applies to: the manufacturer affixes the marking in order to be allowed to sell his product in the European market. This product conforms to the essential requirements of the R&TTE directive 1999/5/EC in order to attain CE Marking. A notified body has determined that this device has properly demonstrated that the requirements of the directive have been met and has issued a favorable certificate of expert opinion. As such the device will bear the notified body number 0560 after the CE mark The CE Marking is not a quality mark. Foremost, it refers to the safety rather than to the quality of a product. Secondly, CE Marking is mandatory for the product it applies to, whereas most quality markings are voluntary. Marking: The product shall bear the CE mark, the notified body number(s) as depicted to the right. CE 0560. SAR information: 0.721 W/Kg (10g) 26
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Distributer: NTT Docomo, Inc.; Manufacturer: Buffalo Inc. Create Date : 2009:06:10 14:06:58+08:00 Modify Date : 2011:06:23 09:43:55+08:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : BF-01C User Manual Creator : Distributer: NTT Docomo, Inc.; Manufacturer: Buffalo Inc. Metadata Date : 2011:06:23 09:43:55+08:00 Creator Tool : Adobe InDesign CS4 (6.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 6820 bytes, use -b option to extract) Instance ID : uuid:2c28bebd-8eaa-42c0-8a03-7865ad66aa05 Original Document ID : xmp.did:9B32AB0E70C0DF11A70BEF5B90105918 Document ID : xmp.did:F9D59E65FA53DE118D24906E7CF4DB51 Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:9B32AB0E70C0DF11A70BEF5B90105918, xmp.iid:9C32AB0E70C0DF11A70BEF5B90105918, xmp.iid:9D32AB0E70C0DF11A70BEF5B90105918, xmp.iid:9E32AB0E70C0DF11A70BEF5B90105918, xmp.iid:939FA23797C1DF11B4D9AB0C88F5BDFA, xmp.iid:949FA23797C1DF11B4D9AB0C88F5BDFA, xmp.iid:959FA23797C1DF11B4D9AB0C88F5BDFA, xmp.iid:0D0B6156F7C1DF1187DA9E86157806D9, xmp.iid:120B6156F7C1DF1187DA9E86157806D9, xmp.iid:7BDB63A029CDDF11BD958C150C3948B3, xmp.iid:2DC179B87FCFDF11ACC1FB2E583341C2, xmp.iid:2EC179B87FCFDF11ACC1FB2E583341C2, xmp.iid:03004AB78918E01193A1BF23D3E2D44E, xmp.iid:04004AB78918E01193A1BF23D3E2D44E, xmp.iid:07004AB78918E01193A1BF23D3E2D44E, xmp.iid:08004AB78918E01193A1BF23D3E2D44E, xmp.iid:61525CE0FD1BE0118A05EDBD130CE982, xmp.iid:584D7905FE1BE0118A05EDBD130CE982, xmp.iid:69E4A844B452E011940EEBB0E78AAC69, xmp.iid:6AE4A844B452E011940EEBB0E78AAC69, xmp.iid:F60EC7791C55E01184F091229707B290, xmp.iid:F70EC7791C55E01184F091229707B290, xmp.iid:CDE7246FF779E011B91FD959A138F8E6, xmp.iid:CEE7246FF779E011B91FD959A138F8E6, xmp.iid:CFE7246FF779E011B91FD959A138F8E6, xmp.iid:D0E7246FF779E011B91FD959A138F8E6, xmp.iid:CE400FE56E7CE011A2B9E04F90C012A0, xmp.iid:66E59126E97DE011946BC7EEDC548ED9, xmp.iid:B298788E4C7FE011AB7CADE554A957EE, xmp.iid:B32E19450890E011B651A0F4CB2133C1, xmp.iid:EE7DC138EF53DE118D24906E7CF4DB51, xmp.iid:EF7DC138EF53DE118D24906E7CF4DB51, xmp.iid:F47DC138EF53DE118D24906E7CF4DB51, xmp.iid:F57DC138EF53DE118D24906E7CF4DB51, xmp.iid:69D1626AEF53DE118D24906E7CF4DB51, xmp.iid:C6E90FE7EF53DE118D24906E7CF4DB51, xmp.iid:C7E90FE7EF53DE118D24906E7CF4DB51, xmp.iid:C8E90FE7EF53DE118D24906E7CF4DB51, xmp.iid:C9E90FE7EF53DE118D24906E7CF4DB51, xmp.iid:CAE90FE7EF53DE118D24906E7CF4DB51, xmp.iid:F8D59E65FA53DE118D24906E7CF4DB51, xmp.iid:F9D59E65FA53DE118D24906E7CF4DB51, xmp.iid:C2C9FC60CA54DE11B2E18EFDBD2EB261 History When : 2010:09:15 11:23:18+09:00, 2010:09:15 16:07:31+09:00, 2010:09:15 16:07:31+09:00, 2010:09:16 01:45:23+09:00, 2010:09:16 22:35:06+09:00, 2010:09:16 22:35:44+09:00, 2010:09:16 22:35:44+09:00, 2010:09:17 10:03:09+09:00, 2010:09:17 11:12:42+09:00, 2010:10:01 16:00:51+09:00, 2010:10:04 15:22:24+09:00, 2010:10:04 15:22:24+09:00, 2011:01:05 14:07:38+09:00, 2011:01:05 14:07:38+09:00, 2011:01:05 17:49:11+09:00, 2011:01:05 17:49:11+09:00, 2011:01:09 23:37:40+09:00, 2011:01:09 23:37:52+09:00, 2011:03:20 14:38:22+09:00, 2011:03:20 14:38:22+09:00, 2011:03:23 16:11:41+09:00, 2011:03:23 16:20:24+09:00, 2011:05:09 13:47:24+09:00, 2011:05:09 13:53:05+09:00, 2011:05:09 14:00:09+09:00, 2011:05:09 14:03:55+09:00, 2011:05:12 18:57:41+09:00, 2011:05:14 14:24:41+09:00, 2011:05:16 09:39:52+09:00, 2011:06:06 15:43:21+09:00, 2009:06:08 13:43:11+08:00, 2009:06:08 13:43:11+08:00, 2009:06:08 13:44:05+08:00, 2009:06:08 13:44:19+08:00, 2009:06:08 13:44:28+08:00, 2009:06:08 13:48:19+08:00, 2009:06:08 13:49:51+08:00, 2009:06:08 13:51:11+08:00, 2009:06:08 13:52:44+08:00, 2009:06:08 13:53:31+08:00, 2009:06:08 15:08:09+08:00, 2009:06:08 15:08:09+08:00, 2009:06:09 16:05:41+08:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /, /metadata, /;/metadata, /, /, /, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /metadata, /, / Derived From Instance ID : xmp.iid:F8D59E65FA53DE118D24906E7CF4DB51 Derived From Document ID : xmp.did:ED7DC138EF53DE118D24906E7CF4DB51 Derived From Original Document ID: xmp.did:9B32AB0E70C0DF11A70BEF5B90105918 Derived From Rendition Class : default Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:37647c5a-3448-44f3-bdb6-a286fc6fcb79, uuid:4e460133-ce13-468b-bf05-dc88bd2b175c, uuid:3a4db2f6-b795-4b14-b8a5-010ed9a15623, uuid:49d979b5-88c8-4dd2-bd6b-2ff64b2adced, uuid:dc382b34-785c-425a-8a80-c61c70547e28, xmp.iid:0D333589CD54DE11B1EA9464AEC1B9BF, uuid:dc79a48e-2373-4852-b5ad-1272c7300a7e, uuid:69b509cb-3329-42ff-8fed-99fe4f11553d, uuid:56350220-364f-4974-9ebe-411e96f19887, uuid:df0cca13-1410-465c-8209-538842fdb0e3, uuid:6f50874a-aff2-402f-85c1-0498c009a19b, uuid:b624ad00-2c71-4dc5-adbf-c246b63e3186, uuid:fcc82f6a-e2e3-406b-a2eb-ce61de3f5447, uuid:81e7ac69-5a5a-4ec7-876a-38578dd655f2, uuid:ef84d567-e8cb-4f3d-89ba-6dca30c9b1e6, uuid:daa0d70d-5d93-4ea6-9257-395ee9968ae9, xmp.iid:0D333589CD54DE11B1EA9464AEC1B9BF, uuid:7000c786-22e8-4609-8bf5-68dcfa37a241, xmp.iid:0D333589CD54DE11B1EA9464AEC1B9BF, xmp.iid:0D333589CD54DE11B1EA9464AEC1B9BF, uuid:462b7038-6461-4d52-81d9-e39d62a30dde, xmp.iid:0D333589CD54DE11B1EA9464AEC1B9BF, xmp.iid:0D333589CD54DE11B1EA9464AEC1B9BF, uuid:b76ea8f7-b88e-4e3c-8260-4c31ac818c0b Manifest Reference Document ID : xmp.did:17F3C4D9F679E01190B0AAE2CECA796B, xmp.did:EB34F49E1B7AE011A826BD67F1094F60, xmp.did:EC34F49E1B7AE011A826BD67F1094F60, xmp.did:07F8E266367CE011BF51804F06193558, xmp.did:08F8E266367CE011BF51804F06193558, xmp.did:0D333589CD54DE11B1EA9464AEC1B9BF, xmp.did:ED34F49E1B7AE011A826BD67F1094F60, xmp.did:EE34F49E1B7AE011A826BD67F1094F60, xmp.did:EF34F49E1B7AE011A826BD67F1094F60, xmp.did:F034F49E1B7AE011A826BD67F1094F60, xmp.did:15333589CD54DE11B1EA9464AEC1B9BF, xmp.did:16333589CD54DE11B1EA9464AEC1B9BF, xmp.did:E883B25BDD54DE11B1EA9464AEC1B9BF, xmp.did:E983B25BDD54DE11B1EA9464AEC1B9BF, xmp.did:14333589CD54DE11B1EA9464AEC1B9BF, xmp.did:EA83B25BDD54DE11B1EA9464AEC1B9BF, xmp.did:0D333589CD54DE11B1EA9464AEC1B9BF, xmp.did:0E333589CD54DE11B1EA9464AEC1B9BF, xmp.did:0D333589CD54DE11B1EA9464AEC1B9BF, xmp.did:0D333589CD54DE11B1EA9464AEC1B9BF, xmp.did:FD1839917C55DE11A104DDC377527886, xmp.did:0D333589CD54DE11B1EA9464AEC1B9BF, xmp.did:0D333589CD54DE11B1EA9464AEC1B9BF, xmp.did:CB0E0B477C55DE11BEA0EC66F5BF9951 Doc Change Count : 30 Producer : Adobe PDF Library 9.0 Trapped : False Page Layout : OneColumn Page Count : 27EXIF Metadata provided by EXIF.tools