Quanta Computer TED Notebook User Manual TED user menu English Regulation 20160812
Quanta Computer Inc Notebook TED user menu English Regulation 20160812
Users Manual
AMD TED 14” Notebook User Menual Device layout figure KB Finger Print Click Pad SPEAKER Device layout figure - Continued CAMERA LED CAMERA Mic Mic BATT Charge LED Audio combo jack LCD & Touch screen Power Button VOLUME BUTTON USB TYPC C Buttons & LEDs Buttons/ LED Power button Button Function • Press and hold to turn the device on or off. • Press and hold for 4 seconds to reset the device if it has fatal errors or hang-ups, hang or freezes. Volume button • Press to adjust the device volume. LED • Power LED: Blue as system power on • Charge LED: Orange – in charging, Blue – Full charged Devices and Socket Name Function LCD + Touch panel 14.0” FHD LCD with touch panel supported Wifi + BT4.0 802.11a/b/g/n/ac +BT4.1 combo module Camera Built-in 1M HD Camera, digital microphone included Touchpad Precision touchpad FingerPrint Security input Speaker Internal speaker USB type C connector 1. Connect to USB2/3 devices, display devices 2. Other devices via a USB type C dongle 3. Connect to type C adapter Connect to audio headset Audio combo jack Using mode 3 using mode supported: Clamshell mode, Tent mode and Tablet mode Clamshell mode Tent mode: KB & touchpad disabled Tablet mode: KB & touchpad disabled Charging the battery • Use the adapter to charge the battery via USB type C connector before using it for the first time. • Please use only device-provided provided chargers to charge battery. Unapproved chargers or cables can cause the battery to explode or damage the device. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located located or operating in conjunction with any other antenna or transmitter. Continued FOR PORTABLE DEVICE USAGE (<20cm from body/SAR needed) Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES) DEVICES Note: The country code selection is for non-US US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Industry Canada statement This device complies with Industry Canada license-exempt license RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1) l'appareil ne doit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. ICES Cet appareil numérique de la classe B est conforme à la norme NMB-003 NMB du Canada. This device complies with RSS-310 310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. 310 d'Industrie Canada. L'opération est soumise à la Cet appareil est conforme à la norme RSS-310 condition que cet appareil ne provoque aucune interférence nuisible. nuisible Industry Canada statement - Continued This device and its antenna(s) must not be co-located located or operating in conjunction with any other antenna or transmitter, except tested built-in in radios. Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées. The County Code Selection feature is disabled for products marketed in the US/ Canada. La fonction de sélection de l'indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada. Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Déclaration d'exposition aux radiations: Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis Etats et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible. disponible Industry Canada statement - Continued Caution : 1) the device for operation in the band 5150-5250 5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel channel mobile satellite systems; 2) the maximum antenna gain permitted for devices in the bands 5250-5350 5250 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and 3) the maximum antenna gain permitted for devices in the band 5725-5825 5725 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to to-point operation as appropriate. 4) Users should also be advised that high-power power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement: 1) les dispositifs fonctionnant dans la bande 5150-5250 5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; 2) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 5250 MHz et 5470-5725 5725 MHz doit se conformer à la limite de p.i.r.e.; 1) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5825 5725 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. 2) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., d., qu’ils ont la priorité) pour les bandes 5250-5350 5250 MHz et 5650-5850 5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. System specification System specification Voltage/ Current: Voltage 20V, Maximum current 2A AC Adapter Input voltage range / Frequency: :100 ~ 240 V AC, 50/60 Hz DC Output:20V/0 ~ 2.25A Trade name / Model : DELTA ELECTRONICS, INC. / ADP-45PE BB Battery Built-in Lithium-ion Polymer rechargeable battery Capacity: 52.2 Whr
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 13 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : 59a05498-6db5-11e6-0000-8c286cf2bb76 Producer : GPL Ghostscript 8.70 Keywords : () Modify Date : 2016:08:26 14:53:24+08:00 Create Date : 2016:08:26 14:53:24+08:00 Creator Tool : \376\377\000P\000D\000F\000C\000r\000e\000a\000t\000o\000r\000 \000V\000e\000r\000s\000i\000o\000n\000 \0000\000.\0009\000.\0009 Document ID : 59a05498-6db5-11e6-0000-8c286cf2bb76 Format : application/pdf Title : \376\377\000T\000E\000D\000 \000u\000s\000e\000r\000 \000m\000e\000n\000u\000-\000E\000n\000g\000l\000i\000s\000h\000_\000R\000e\000g\000u\000l\000a\000t\000i\000o\000n\000-\0002\0000\0001\0006\0000\0008\0001\0002 Creator : \376\377\000A\0000\0001\0002\0001\0000\0009\0000 Description : () Author : A0121090 Subject :EXIF Metadata provided by EXIF.tools