Quantum Dynamic Dolphin Remote Operation Manual Operating Instructions
Dynamic Dolphin Remote qr_dolphin_boi
Dynamic Dolphin Remote to the manual 5733388a-de33-4c4b-9bd2-f43ee88d59b9
2014-12-13
: Quantum Quantum-Dynamic-Dolphin-Remote-Operation-Manual-125807 quantum-dynamic-dolphin-remote-operation-manual-125807 quantum pdf
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Dynamic Dolphin Remote Basic Operation Instructions 2 Basic Operation Instructions Dolphin IMPORTANT NOTICE This manual describes basic operation for the Dynamic Dolphin Remote only and must be read in conjunction with the owners manual supplied with your power chair. Please read both manuals in their entirety before operating the Dynamic Dolphin Remote or your power chair. This manual is intended as a supplement to the in-service training provided by your authorized provider. If you have any questions or problems regarding the Dynamic Dolphin Remote, please contact your authorized provider. Copyright © 2001 Pride Mobility Products Corporation Dolphin Basic Operation Instructions 3 TABLE OF CONTENTS INTRODUCTION ................................................................................ 4 Dynamic Dolphin Remote ......................................................................... 4 MAGNETIC KEY LOCK SYSTEM ............................................... 6 JOYSTICK OONAPU ........................................................................ 6 DRIVE PROGRAM SELECTION ................................................... 6 ACTUATOR CONTROL .................................................................... 7 4 Basic Operation Instructions Dolphin INTRODUCTION Welcome to Quantum Rehab, a division of Pride Mobility Products Corporation (Pride). Quantum Rehab is dedicated to the customization of power chairs for users with advanced rehabilitation and mobility issues. Quantum Rehab also expands possibilities for enhanced healthcare attendant control over power chair functions to provide a secondary level of support for our customers where necessary. Dynamic Dolphin Remote The Dynamic Dolphin Remote is a DX compatible control unit complete with a joystick, fully functional keypad, and the capability to support up to five different drive programs and several actuator functions. This manual is designed to explain basic operation for the following functions available with the Dolphin Remote: 1. Magnetic Key Lock System - The user can lock the power chair to prevent unintended use of the chair. 2. Joystick OONAPU - OONAPU stands for Out Of Neutral At Power Up. This is a safety measure designed to prevent unintended movement of the power chair. 3. Drive Program Selection - The user can choose from one of five programs to control the movement and speed of the power chair. 4. Actuator Control - The user can control up to five actuators using the Dolphin Remote. Figure 1 provides information on the Dynamic Dolphin Remote components and connections. Use this diagram to familiarize yourself with the function and location of each component before using the Dynamic Dolphin Remote. Dolphin Basic Operation Instructions Status LED 5 Left & Right Indicator Switches & LEDs Indicates On/Off Status, and flashes to indicate system faults. Battery Gauge Press the appropriate switch to activate turn indicator. Press again to turn off. LED flashes when activated. A series of ten LEDs, which indicate charge level On/Off Switch Toggles the system on or off. Drive Program Display Horn Switch A 7-segment display shows the currently selected drive program. Press to activate warning horn. Remote Status LED Light Switch & LED Toggles the head/tail/side lights on or off. LED is lit when activated. Indicates status of Dolphin Remote. Drive Program Select Switch This switch will scan through and select one of five drive programs. seat height Hazard Light Switch & LED Press to make both indicators flash simultaneously. Press again to turn off. LED flashes when activated. leg rest adjust (right & left) back tilt seat tilt Actuator Select Switches 5 switches for actuator selection. Not used for actuator operation, only selection. LED above switch lights up when activated. Magnetic Key Lock & LED Locks DX System to prevent unauthorized use. Upon reactivation of unit, LED will flash until magnetic key is used to unlock system. Joystick Controls the speed and direction of power chair, as well as actuator control when selected. Magnetic Key Used to lock and unlock the DX System. BACK VIEW Battery Connection Socket Connects to Battery Charger Plug. DXBUS Sockets Enables DXBUS cable to be used to interconnect to the remainder of the DX System. Figure 1. Dolphin Components and Connections 6 Basic Operation Instructions Dolphin MAGNETIC KEY LOCK SYSTEM 1. To arm the locking system, hold the magnetic key on or near the key symbol on the Dolphin front panel. See figure 1. The system will beep and automatically power itself down. No LEDs should be lit. 2. To turn the power chair back on, press the On/Off Switch. The system will power on, but the locking system needs to be disarmed before normal operation can occur. The key symbol will flash, indicating that the system should be disarmed. 3. To disarm the lock, put the magnetic key on or near the key symbol. The LED will stop flashing, and normal operation may resume. If the locking system is not disarmed within one minute, the Dolphin will shut itself off. JOYSTICK OONAPU If the power chair is powered up while the joystick is not in the neutral position, the System Status LED will flash for as long as the condition persists up to a maximum of five seconds. After five seconds, a Fault Flash Code is signaled on the System Status LED, and the Remote Status LED will flash. To clear the fault, power down, put the joystick in neutral, and power the system back on. DRIVE PROGRAM SELECTION The Dolphin can control up to five drive programs. Drive Program 1 is configured as the slowest, and Drive Program 5 is configured as the fastest. To select the preferred drive program, press the Drive Program Select Switch. The selected drive program will be displayed on the 7-segment display. See figure 1. Each press of the Drive Program Select Switch will increase the drive program to the next level until it cycles back to Drive Program 1. Dolphin Basic Operation Instructions 7 ACTUATOR CONTROL The Dolphin can support the control of up to five actuators if a correctly configured actuator control module is present. NOTE: Once an actuator is selected, driving will be inhibited until the actuator is deselected. 1. Press the Actuator Switch representing the seat function needing adjustment. See figure 2. 2. Push the joystick full forward or full reverse to adjust the actuator. A forward command with the joystick will extend the actuator; a reverse command will retract the actuator. NOTE: When using the Dolphin in conjunction with a TRx Seating System, give a reverse command to extend the actuator, release the joystick, then give another reverse command to retract the actuator. The reverse command toggles between extend and retract only for TRx units. 3. Press the Actuator Switch again to deselect the actuator and resume normal operation. Figure 2. Actuator Control Selection 8 Basic Operation Instructions Exeter, PA Quantum Hotline: 1-866-800-2002 Visit the Rehab Zone at: www.quantumrehab.com INFMANU1756/A/MAY 2001 Dolphin
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:06:05 15:44:27 Producer : Acrobat Distiller 4.0 for Windows Subject : Dolphin Operating Instructions Author : crowles Creator : Adobe PageMaker 6.52 Title : Dolphin Operating Instructions Modify Date : 2001:06:05 15:44:34-04:00 Page Count : 8EXIF Metadata provided by EXIF.tools