Quantum Tape Array 5 Installation Guide Drive Carrier

: Quantum Quantum-Tape-Array-5-Installation-Guide-780360 quantum-tape-array-5-installation-guide-780360 quantum pdf

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

Installation Guide

Drive Carrier Module

Copyright Notice
 Copyright ADIC, August 1998
Document Number 62-0116-01 Rev. A
Advanced Digital Information Corporation
Shipping Address: 11431 Willows Road NE
Redmond, WA 98052
Mailing Address: P.O. Box 97057
Redmond, WA 98073-9757
(425) 881-8004
Fax: (425) 881-2296
Customer Assistance: (888) 809-3052
World-Wide Web: http://www.adic.com
BBS: (425) 883-3211
ADIC is a trademark of Advanced Digital Information Corporation. Quantum® is a registered
trademark of Quantum Corporation. DLT™ and DLTTape™ are trademarks of Quantum
Corporation.

ii

Equipment Description
The DLT tape drives employed in the Tape Array 5 Rackmount Enclosure are mounted in easily
inserted/removed drive carrier modules. The modules slide into the front of the Tape Array 5
enclosure and are retained with captive screws located at the top and bottom of the carrier. Each
module contains SCSI and power connectors, which dock with mating connectors inside the Tape
Array 5 enclosure. The modules provide all power and data connections between the drives and the
Tape Array 5 enclosure.

Figure 1-1: Drive/Carrier Assembly

1

The Tape Array 5 enclosure features a snap on/off front bezel. The bezel can be easily snapped off
for drive carrier module insertion/removal. Media cartridges loaded into the drives are accessible
when the bezel is snapped in place.

SCSI Connector
Power Connector
Front Bezel

Figure 1-2: Tape Array 5 Enclosure, Front View

2

Installing Tape Drives
1.

Snap off the front bezel by pulling each side away from the enclosure. Set the bezel aside.

Figure 1-3: Tape Array 5 Enclosure, Front View, Bezel Removed

3

2.

Insert each drive carrier module into the unit by sliding the mounting rail on the drive/carrier
module into the rail guide mounted in the enclosure. The drive carrier module should seat
fully into the enclosure (the mounting screw flanges on the top and bottom of the carrier will
contact the enclosure chassis). Check the carrier to insure proper docking connections.

Drive/Carrier Assembly

Figure 1-4: Drive/Carrier Assembly Being Installed

4

3.

Fully tighten the captive screws at the top and bottom of each drive carrier module to secure it
in the Tape Array 5 enclosure.

Upper Captive Screw
Lower Captive Screw

Figure 1-5: Tightening Captive Screws
Caution
When inserting a drive carrier module, be sure that the orientation
of the module is correct. The SCSI data cable connector should be
nearest the top of the carrier.

5

Blank Page

6



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : Microsoft Word
Create Date                     : Tuesday, August 17, 1999 12:41:19 PM
Title                           : Tape Array 5 Drive Carrier Installation Guide
Author                          : 
Producer                        : Acrobat PDFWriter 3.02 for Windows
Keywords                        : Tape, Array, 7, TapeArray5
Subject                         : Tape Array 5
Modify Date                     : 2000:01:06 11:16:51-07:00
Page Count                      : 8

EXIF Metadata provided by EXIF.tools