Queclink Wireless Solutions BTC100 BLE Data Acquisition Device User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3135349
Application ID	10iTGYFXlAhNQwTzF7q60g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	80.53kB (1006601 bits)
Date Submitted	2016-09-14 00:00:00
Date Available	2016-09-14 00:00:00
Creation Date	2017-12-14 18:26:59
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-14 18:26:59
Document Title	Users Manual
Document Creator	WPS Office
Document Author:	eagle.liu

BTC100 User manual
BTC100 User manual
Revision: 1.00
http://www.queclink.com
sales@queclink.com
STFILEFLOW001
-1-
BTC100 User manual
Document Title
BTC100 User manual
Version
1.00
Date
2016-5-18
Status
Release
Document Control ID
General Notes
Queclink offers this information as a service to its customers, to support application and
engineering efforts that use the products designed by Queclink. The information provided is
based upon requirements specifically provided to Queclink by the customers. Queclink has
not undertaken any independent search for additional relevant information, including any
information that may be in the customer’s possession. Furthermore, system validation of this
product designed by Queclink within a larger electronic system remains the responsibility of
the customer or the customer’s system integrator. All specifications supplied herein are
subject to change.
Copyright
This document contains proprietary technical information which is the property of Queclink
Limited. The copying of this document, distribution to others, and communication of the
contents thereof, are forbidden without express authority. Offenders are liable to the payment
of damages. All rights are reserved in the event of a patent grant or the registration of a utility
model or design. All specification supplied herein are subject to change without notice at any
time.
Copyright © Queclink wireless Solutions(ShenZhen) Co.,Ltd. 2010
-1-
BTC100 User manual
CONTENTS
CONTENTS............................................................................................................................2
0. Revision History............................................................................................................... 3
1. Introduction.....................................................................................................................4
2. Product Overview............................................................................................................5
2.1. Appearance............................................................................................................ 5
2.2. BLE Description...................................................................................................... 5
2.3. USB Interface Description..................................................................................... 7
2.4. LED Description......................................................................................................7
-2-
BTC100 User manual
0. Revision History
Revision
Date
1.00
2016.5.18
Author
Description of change
Initial
-3-
BTC100 User manual
1. Introduction
BTC100 is designed for detecting acceleration or deceleration record on a vehicle by
its internal accelerometer, then transmitting the relevant data(x, y, z axis) to the
mobile phone APP via bluetooth. It can also detect Ignition ON/OFF events in which
it is tethered to. On the surface of BTC100, there is a rechargeable USB interface
(output voltage: 5V) is convenient for us to charge our phone or other device. In
addition to the above, it within the super-cap can regard as a battery, the super-cap
could support the device for 48 hours when it’s full of electricity and without outlet.
Note: This product has assumed that communication with sensor is limited to BT
Low Energy, and Classic BT is not supported.
-4-
BTC100 User manual
2. Product Overview
2.1. Appearance
Input: 12/24 VDC
Insert vehicle
Power & BLE Indication
USB
Figure 1
Figure 2
Power Indication
BLE Indication
2.2. BLE Description
1. Supply 12/24 VDC or insert vehicle, then the LED will be red. As shown in figure 1.
2. Pair and Link BLE to phone without password,the LED will be blue. As shown in
figure 2. The specific steps and simple function are as follows.

Look at figure 3, clink selected area to connect BLE. If connect successfully ,
it will be figure 4, at the same time LED are blue.

Clink “Show” in figure 4, there will display an UUID which you connected
and local name. For example, please look at figure 5,there is Telematics Service
UUID.
-5-
BTC100 User manual
Figure 3

Figure 4
Figure 5
Read function. Look at figure 6 and figure 7, clink “Soft Revision String”,
then clink” Read again”, if display a right string which indicate OK.
Figure 6

Figure 7
Write function, Look at figure 8 . For example ,write a primary UUID, if it can
be advertised which indicate OK, as shown in figure 9.
-6-
BTC100 User manual
Figure 8
Figure 9
2.3. USB Interface Description
The USB can be connected with our phone or other device for charging by general
data cable.
Output voltage
5V
Output max current
2.1A
USB interface
2.4. LED Description
There are several LEDs (red and blue double color) indicate power and BLE state in
BTC100, the description as following.
LED
Power on and normal
Red
Connected bluetooth
Blue
Disconnect bluetooth
Red
Power off
Dark
-7-
BTC100 User manual
FCC warning
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
RF exposure statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable exposure condition without
restriction.
-8-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : eagle.liu
Create Date                     : 2016:06:23 19:44:37+11:30
Modify Date                     : 2016:09:13 14:08:59-07:00
Subject                         : 
Trapped                         : false
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : eagle.liu
Description                     : 
Title                           : 
Comments                        : 
Company                         : 
Source Modified                 : D:20160623194437+11'44'
Creator Tool                    : WPS Office
Metadata Date                   : 2016:09:13 14:08:59-07:00
Keywords                        : 
Producer                        : 
Document ID                     : uuid:9d3731a7-e7e2-4d1c-9b1c-84f6a887ed5d
Instance ID                     : uuid:95cc401e-d93d-43c4-8e71-f2bacb5053a8
Page Count                      : 9

EXIF Metadata provided by EXIF.tools