Queclink Wireless Solutions GL300W GPS Locator User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2722633
Application ID	vEqvLPW/LogabB9ArKvcaw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	60.84kB (760498 bits)
Date Submitted	2015-08-21 00:00:00
Date Available	2015-08-21 00:00:00
Creation Date	2015-08-20 02:53:06
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2015-08-20 02:53:06
Document Title	Users Manual
Document Creator	Microsoft® Office Word 2007
Document Author:	Ken.ji

WCDMA Tracker GL300W
User Manual
TRACGL300WUM001
Version:1.00
GL300W User Manual
Document Title
GL300W User manual
Version
1.00
Date
2015-5-25
Status
Release
Document Control ID
TRACGL300WUM001
General Notes
Queclink offers this information as a service to its customers, to support application and
engineering efforts that use the products designed by Queclink. The information provided is
based upon requirements specifically provided to Queclink by the customers. Queclink has
not undertaken any independent search for additional relevant information, including any
information that may be in the customer’s possession. Furthermore, system validation of this
product designed by Queclink within a larger electronic system remains the responsibility of
the customer or the customer’s system integrator. All specifications supplied herein are
subject to change.
Copyright
This document contains proprietary technical information which is the property of Queclink
Limited., copying of this document and giving it to others and the using or communication of
the contents thereof, are forbidden without express authority. Offenders are liable to the
payment of damages. All rights reserved in the event of grant of a patent or the registration of
a utility model or design. All specification supplied herein are subject to change without
notice at any time.
Copyright © Queclink Wireless Solutions Ltd. 2015
TRACGL300WUM001
-1-
GL300W User Manual
Contents
Contents ............................................................................................................................................ 2
0. Revision history ............................................................................................................................ 3
1. Introduction ................................................................................................................................... 0
2. Product Overview ......................................................................................................................... 1
2.1. Appearance ........................................................................................................................ 1
2.2. Buttons/Mini USB Interface Description ............................................................................ 1
2.3. LEDs Description ................................................................................................................. 2
2.4. External Power Interface .................................................................................................... 2
2.4.1.
External DC Charger Interface ........................................................................... 2
2.4.2.
External Battery Interface ................................................................................. 3
2.5. Ignition Detection ............................................................................................................... 3
2.6. External Input Interface...................................................................................................... 3
3. Getting Started .............................................................................................................................. 4
3.1. Parts List ............................................................................................................................ 4
3.2. Battery Charging ................................................................................................................ 5
3.3. GL300W External Cable Interface ..................................................................................... 5
3.4. Turn on/Turn off ................................................................................................................. 6
4. Troubleshooting and Safety info ................................................................................................... 7
4.1. Troubleshooting ................................................................................................................. 7
4.2. Safety info .......................................................................................................................... 7
TRACGL300WUM001
-2-
GL300W User Manual
0. Revision history
Revision
Date
Author
Description of change
1.00
2015/5/25
Hazard.Zhang
Initial
TRACGL300WUM001
-3-
SuperEasy GSM Module User Manual
1. Introduction
The water resistant GL300W is a powerful GPS locator designed for lone worker, vehicle,
pet and asset tracking applications. The thumb sized button makes this device ideal for
applications requiring rapid notification of emergency alert or regular setting of geo-fences
based on current location. Its built-in GPS receiver has superior sensitivity and fast time to
first fix. Its WCDMA allows the GL300W's location to be monitored in real time or
periodically tracked by a backend server and mobile devices. Its built-in 3-axis
accelerometer allows motion detection and extends battery life through sophisticated
power management algorithms. System integration is straightforward as complete
documentation is provided for the full featured @Track protocol. The @Track protocol
supports a wide variety of reports including emergency, geo-fence boundary crossings,
low battery and scheduled GPS position.
TRACSuperEasyUM001
SuperEasy GSM Module User Manual
2. Product Overview
2.1. Appearance
2.2. Buttons/Mini USB Interface Description
Button /Mini USB Interface Description
Power Key


Turn on GL300W
Turn off GL300W when without charging. (If power key is
enabled)
Function Key

Geo-Fence mode
Long press the key to enable/disable Geo-Fence ID0
Geo-Fence in current position mode
Long press the key to enable/disable Geo-Fence ID0. If
enable Geo-Fence ID0, using the current position as the
center of Geo-Fence 0.
SOS mode (default)
Long press the key to active SOS alarm


Mini USB interface



TRACSuperEasyUM001
Connect a 5V DC adapter can power GL300W and charge the
internal battery
Connect a 3.7V Li-ion or Li-Polymer battery can power
GL300W
Backend server developer or administrator can use the
Data_Cable_M to configure GL300W
SuperEasy GSM Module User Manual
2.3. LEDs Description
There are three LED in GL300W, the description as following.
LED
CELL LED
GPS LED
PWR LED
Event
Searching network
State
Fast flash
Network has been registered
Power off
SIM-PIN Locked
 is 2
GPS has fixed
Slow flash
Dark
Solid
Dark
Solid
GPS is in fixing
Fast flash
GPS is on and GPS data wrong
Slow flash
GPS is off
Dark
If  is 0, 150 seconds later after powers on.
Dark
 is 2
Dark
Power on and normal
Dark
Charger inserted and charging completed
Solid
Charger inserted and charging
Fast flash
Power key was pressed and prepare to power off
Abnormal
Fast flash
Power low alert
Slow flash
Power off or turn off the power light by command
Dark
 is 2
Dark
Fast flash
2.4. External Power Interface
2.4.1. External DC Charger Interface
The Pin2 on Mini-USB connector are used for charging and named as VCHG pin, It can
be connected to a 5V DC power supply to power GL300W and charge the internal battery.
TRACSuperEasyUM001
SuperEasy GSM Module User Manual
2.4.2. External Battery Interface
The Pin 8 on Mini-USB connector is for external battery and named as EXTBAT pin, It can
be connected to 3.7V Li-ion or Li-Polymer battery to power GL300W.
2.5. Ignition Detection
The Pin 7 on Mini-USB connector is for ignition detection when GL300W is used in vehicle
tracking application, It is named as IGN_IND pin.
Another easy way is to connect PIN7 to a power output in the fuse box of the vehicle which
is only enabled after the vehicle is ignition on. For example: the power output for radio FM.
2.6. External Input Interface
The Pin 5 on Mini-USB connector is a negative trigger input in newer hardware version, It
is named as NSW pin.
TRACSuperEasyUM001
SuperEasy GSM Module User Manual
For negative trigger input the electrical conditions are:
Logical State
Active
Inactive
Electrical State
0V to 0.8V
1.7V to 32V or Open
An input example is shown as following figures:
Example of NSW pin connect to a panic button
3. Getting Started
3.1. Parts List
Name
Picture
Remark
GL300W Locater
The
locator.
AC-DC Power Adapter
(Standard accessory)
It is used to charge the internal
battery of GL300W.
TRACSuperEasyUM001
WCDMA/GPRS/GPS
SuperEasy GSM Module User Manual
GL300W Data Cable
(Optional accessory)
It is the USB data cable which
can be used for firmware
upgrading and configuration.
GL300W External Cable
(Optional accessory)
It is the extend cable which
include the charger interface
and external battery interface
on GL300W. It also includes the
ignition detection interface on
the GL300W.
3.2. Battery Charging
 Please connect AC-DC power adapter with GL300W.
 Insert the AC-DC power adapter into the power socket.
 During charging, the PWR LED is flashing fast. When the battery is full charged, the PWR LED
will be Ever-light.
 You can also charge the battery by USB cable which connects GL300W with the PC.
 Charging time is about 5 hours.
Note: Before the first time using GL300W, please full charge the battery.
3.3. GL300W External Cable Interface
 GL300W External Cable is a cable with a Mini USB connector and six wires which include
the external power interface, ignition detect and input interface for GL300W. Please
find the detail description in following table.
Color
Name
Remark
RED
External DC IN (5V)
Please refer to 2.4.1 for detail
Black
Ground
Please refer to 2.4.1 for detail
Blue
External Battery IN (DC 3.4V to 4.2V)
Please refer to 2.4.2 for detail
TRACSuperEasyUM001
SuperEasy GSM Module User Manual
White
Ignition Detect
Please refer to 2.5for detail
Green
NSW（negative trigger input）
Please refer to 2.6 for detail
3.4. Turn on/Turn off
 Turn on:
 Method 1: Press the Power key at least 3 seconds and release it to turn on GL300W. At
the same time, PWR LED will light on.
 Method 2: Connect device to charger or external battery, and it will turn on
automatically, PWR LED will light on.
 Turn off:
 Method 1: Press the power key about 2 seconds; PWR LED will fast flash and then turn
off, it indicates that GL300W is turned off. The time of power off is depended on the
quality of network. The maximum time of power off is 90 seconds. It is only valid to
turn off when using internal battery. Please note the end-user can not power off
GL300W when the power key is disabled by protocol.
 Method 2: If using external battery, device will power turn-off when external battery
disconnect.
TRACSuperEasyUM001
SuperEasy GSM Module User Manual
4. Troubleshooting and Safety info
4.1. Troubleshooting
Trouble
Possible Reason
Solution
After GL300W is turned on,
the WCDMA LED flashes
quickly always.
The signal is too weak;
GL300W can’t register to the
network.
Please move GL300W into
place with good WCDMA
coverage.
Messages can’t be reported
to the backend server by
GPRS.
APN is wrong. Some APN
cannot visit the internet directly.
Ask the network operator for
the right APN.
The IP address or port of the
backend server is wrong.
Make sure the IP address for
the backend server is an
identified address in the
internet.
Unable to power off
GL300W.
The function of power key was
disabled by AT+GTFKS.
Enable the function of power
key by AT+GTFKS.
Unable to power off GL300W if
charger connected or using
external battery.
Disconnect charger or external
battery, and try again.
GL300W is in power saving
mode.
Remove the Data_Cable_M,
and plug it in again. After this
operation, GL300W will exit
from power saving mode for 10
seconds.
No response from UART
when configure GL300W
through UART
Re-try GL300W manager tool
again, it will try to wake up
device.
GL300W can’t get
successful GPS fixing.
The GPS signal is weak.
Please move GL300W to a
place with open sky.
It is better to let the top surface
face to sky. (The same surface
with indication LED)
4.2. Safety info
 Please do not disassemble the device by yourself.
 Please do not put the device on the overheating or too humid place, avoid exposure to
direct sunlight. Too high temperature will damage the device or even cause the battery
explosion.
 Please do not use GL300W on the airplane or near medical equipment.
TRACSuperEasyUM001
SuperEasy GSM Module User Manual
WARNING:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information and Statement:
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue, and the SAR limit of Eu
(CE) is 2 W/kg averaged over one gram of tissue.
Device types: GL300W (FCC ID:YQD-GL300W) has also been tested against this SAR limit.
The highest SAR value reported under this standard during product certification for use on the
body is 1.319W/kg for 1g(FCC).
The safety distance is 6.73cm for this device.
TRACSuperEasyUM001

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 13
Language                        : en-US
Tagged PDF                      : Yes
Author                          : Ken.ji
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2015:08:20 02:53:06
Modify Date                     : 2015:08:20 02:53:06
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools