Queclink Wireless Solutions GMT100 GPS Tracker User Manual GMT100

Queclink Wireless Solutions Co.,Ltd GPS Tracker GMT100

Contents

User Manual

GMT100 User manual TRACGMT100UM001 -10- GPRS/GPS Tracker GMT100User Manual TRACGMT100UM001 Revision: 1.04 http://www.queclink.com sales@queclink.com
GMT100 User Manual TRACGMT100UM001 - 2 - Document Title GMT100 User Manual Version 1.04 Date 2015-10-08 Status Release Document Control ID TRACGMT100UM001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The informa tion provided is based upon requirements specifically provided to Queclink by the customers. Queclink has not undertaken any indep endent search for additional relevant information, including any information that may be in the customer’s possession. Furthermore, system validation of this product designed by Q ueclink within a larger electronic system remains th e responsibility of the customer or the customer’s system in tegrator. All specifications supplied herein are subject to change. Copyright This document contains proprietary technical information which is the property of Queclink Wireless Solutions Co., Ltd. copying of this document and giving it to others and the using or communi cation of the contents thereof, are forbidde n without expr ess authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. All specification supplied herein are subject to change without notice at any time.
GMT100 User Manual TRACGMT100UM001 - 3 - Contents1. Introduction ................................................................................................................... 7 1.1. Reference ............................................................................................................. 7 1.2. Terms and Abbreviations ...................................................................................... 7 2. Product Overview .......................................................................................................... 8 2.1. Appearance .......................................................................................................... 8 2.2. Parts List ............................................................................................................... 9 2.3. Interface Definition ................................................................................................ 9 3. Getting Started ............................................................................................................ 10 3.1. Installing a SIM Card .......................................................................................... 10 3.2. Switch the set on/off ........................................................................................... 10 3.3. Reset Key ............................................................................................................ 11 3.4. USB connector ..................................................................................................... 11 3.5. Power Connection ............................................................................................... 11 3.6. Ignition Detection ................................................................................................. 11 3.7. Digital Input ......................................................................................................... 12 3.8. Analog Input........................................................................................................ 13 3.. Relay Output ..................................................................................................... 14 3.1. Device Status LED ............................................................................................ 15
GMT100 User Manual TRACGMT100UM001 - 4 - TableIndexTable 1 : GMT100 Protocol Reference .............................................................................. 7 Table 2 : Terms and Abbreviations .................................................................................... 7 Table 3 : Part List .............................................................................................................. 9 Table 4 : Description of GMT100 User Cable .................................................................... 9 Table 5 : Electrical Characteristics of Ignition Detection .................................................. 12 Table 6 : Electrical Characteristics of the digital inputs .................................................... 12 Table 7 : Definition of Device status and LED ......................................... 16
GMT100 User Manual TRACGMT100UM001 - 5 - FigureIndexFigure 1. Appearance of GMT100 ..................................................................................... 8 Figure 2. SIM Card Installation ........................................................................................ 10 Figure 3. Typical Power Connection ................................................................................. 11 Figure 4. Typical Ignition Detection ................................................................................. 12 Figure 5. Typical Digital Input Connection ....................................................................... 13 Figure 6. Typical Analog Input Connection ...................................................................... 13 Figure 7. Typical Connection with Siren .......................................................................... 14 Figure 8. GMT100 LED on the Case ............................................................................... 15
GMT100 User Manual TRACGMT100UM001 - 6 - Revision History Revision Date Author Description of change V1.00 2011-11-12 Lei Initial V1.01 2012-09-29 Lei 1> Replace the picture on the cover 2> Add the de scription and notices of cut relay output in chapter of 3.10 3> Modify the description of t able 7 in chapter of 3.9 4> Update the description of some figuresV1.02 2013-9-16 Owen change the relay from NO(normal open to NC(Normal close) V1.03 2013-02-20 Super change the current an d volt age v alues of relay outpu t from 30A&16V to 20 А& 12V V1.04 2015-10-08 Super change the Figure 8(add the diode) and add The relay diode attention description
GMT100 User Manual TRACGMT100UM001 -10- 1. IntroductionThe GMT10 0 is a powe rful GPS locator designe d for vehicle or asset tracking. It has superior receiver sensitivity, fast TTFF (Time to First Fix) and supports Quad-Band GSM frequencies 850/1900, its location can be monitored in real time or be periodically tracked by a backend server or other s pecified terminals. The GMT100 has multiple input/outpu t interfaces that can be us ed fo r monitoring or cont rolling external devices. Based on th e integrated @Track protocol, the GMT100 ca n communicate with a backend server through the GPRS network to tr ansfer reports of Emergency, geo-fence boundary crossings, lo w backup battery or scheduled GPS position as well as many other useful functions. Users can also use GM T100 to monitor the status of a vehicle an d control the vehicle by its external relay output. System Integrators can easily s etup their trackin g systems based on the full-featured @Track protocol. 1.1. Reference Table 1: GMT100 Protocol Reference SN Document name Remark [1] GMT100 @Track Air Interface Protocol The air protocol interface between GMT100 and backend server. 1.2. Terms and Abbreviations Table 2: Terms and Abbreviations Abbreviation Description AIN Analog InputDIN Digital InputDOUT Digital OutputGND Ground
GMT100 User Manual TRACGMT100UM001 -10- 2. Product Overview 2.1. Appearance Figure 1. Appearance of GMT100
GMT100 User Manual TRACGMT100UM001 - 9 - 2.2. Parts List Table 3: Part List Name Picture GMT100 Locator DATA_CABLE_M (Optional) 2.3. Interface Definition There are 8 wires on GMT100 User Cable which contain the connection for power, ignition input, digital input, analog input, siren output, cut output etc. The user cable’s definition is shown in following table. Table 4: Description of GMT100 User Cable Index Colour Description Comment 1 Red Power External DC power input, 12/24V 2 Black Ground System ground (connect to the vehicle’s frame directly） 3 White Ignition Ignition input, positive trigger 4 Blue Digital input Digital input, negative trigger 5 Green Analog input Analog input, 12/24V 6 Brown Siren output Siren output, high end 7 Yellow Relay output line1 Internal relay output line1. 8 Yellow Relay output line2 Internal relay output line2
GMT100 User Manual TRACGMT100UM001 -10- 3. Getting Started3.1. Installing a SIM Card Step 1: Remove the cover by screwdriver. Step 2: Make sure the contact area is facing down, insert the SIM into the slot. Step 3: Install the SIM card cover. Figure 2. SIM Card Installation 3.2. Switch the set on/off There are two methods to Power on GMT100: - GMT100 external power turned on. - Connect GMT100 to PC with user cable. When the external power or USB cable power be removed,GMT100 will switch to internal backup battery and keep on running. When internal backup battery is exhausted, GMT100 will give a report and then turn off. Note: 1-External power and User USB power can be present at same time. 2-For USB port current limitation, w hen configuring GMT100 by user cable, please let backup battery on using. There is one method to turn off GMT100.
GMT100 User Manual TRACGMT100UM001 -12 - -Remove the external power and USB power. -Press the reset key. Note: GMT100 PWR LED will off. 3.3. Reset Key There is a reset key behind the SIM card cover. If the power wire is connected to vehicle power, the system will reboot when the key is pressed; if the system is powered by the backup battery and th e power wire is not be c onnected to vehi cle power, the system will shutdown when the key is pressed. Note: When you finished the firmware upgrade, please press the reset key to reboot the system before configuring the terminal. 3.4. USB connector There is a USB connector on GMT100 which is beside the SIM card. With the USB connector a nd the DAT A_CABLE_M, user ca n configure the syste m or downl oad firmware. As long as the DATA_CABLE_M is plugged in, the system will boot. 3.5. Power Connection The red wire is power wire and the black wire is ground wire. The input voltage range for this device is from 12 to 24V. The device is designed to be installed in vehicles that operate on 12V or 24V systems without the need for external transformers. Figure 3. Typical Power Connection 3.6. Ignition Detection
GMT100 User Manual TRACGMT100UM001 -12 - Table 5: Electrical Characteristics of Ignition Detection Logical State Electrical State Active 12/24V Inactive 0V to 3V or Open Figure 4. Typical Ignition Detection The white wire is u sed for ignition detection. It is str ongly recommended to connect this wire to ignition key “RUN” position as shown up. An alternative to connecting to the ignition switch is to find a non permanent power source that is only a vailable when the vehicle is running. For example the pow er source for the FM radio. Ignition signal can be co nfigured to start transmitting information to backend server whe n ignition is on; and enter power saving mode when ignition is off. 3.7. Digital Input There is a g eneral purpose digital input whic h is the blue wire on GMT100 User Cable, and it is a negative trigg er. The digital input is r ecommended to support panic button function. Table 6: Electrical Characteristics of the digital inputs Logical State Electrical Characteristics Active 0V to 0.8V Inactive OpenThe following diagram shows the recommended connection of the digital input.
GMT100 User Manual TRACGMT100UM001 -12 - Figure 5. Typical Digital Input Connection 3.8. Analog Input There is an analog input which is the green wire on GMT100 User Cable, and the analog input voltage range is 12/24V. The following diagram shows the recommended connection. Figure 6. Typical Analog Input Connection
GMT100 User Manual TRACGMT100UM001 -12 - 3.. Relay Output There is a built-in cut relay on GMT1 00, and it is a NC(Normal Close) type relay w hich maximum switching voltage is 12VDC an d ma ximum continuous curre nt is 20A. On GMT100 user cable one 18AWG yellow wire is connected to the relay NC contact and the other 18AWG yellow wire is connected to the relay COM contact. In certain instances the two wires will be connected together. Note: 1: The rela y output can b e latched by the software, so even if the GMT10 0 is restart or power down in some cases, the relay output will not change. To use the latch function the main power and backup battery should be connec ted. Otherwise the relay will be always in normal close status. 2: The relay works only with 12V main powe r. Use it when the main pow er is 24V may result in damaging. 3: Many modern relays come with a flyback diode pre-installed internal to the relay itself. If the relay has this diode, ensure the relay polarity is properly connected. If this diode is not internal, it should be added externall y. A common diode such as a 1N4004 will work in most circumstances. Figure 7. Typical Connection with Relay
GMT100 User Manual TRACGMT100UM001 -12 - 3.1. Device Status LED Figure 8. GMT100 LED on the Case
GMT100 User Manual TRACGMT100UM001 -12 - Table : Definition of Device status and LED Note: 1 - GSM LED cannot be configured. 2 - GPS LED and PWR LED can be configured to turn off after a period of time using the configuration tool 3 - Fast flashing is about 60ms ON/ 780ms OFF 4 - Slow flashing is about 60ms ON/ 1940ms OFF LED Device status LED status GSM (note1) Device is searching GSM network Fast flashing (Note3) Device has registered to GSM network. Slow flashing (Note4) SIM card needs pin code to unlock. ON GPS (note 2) GPS chip is powered off OFF GPS sends no data or data format error. Slow flashing GPS chip is searching GPS info. Fast flashing GPS chip has gotten GPS info. ON PWR (note 2) No exter nal power and b ackup battery volt age is lower than 3.35V. OFF No exter nal power and b ackup battery volt age is below 3.5V. Slow flashing External power in and backup battery is charging Fast flashing External po wer in and backup ba ttery is fully charged ON
GMT100 User Manual TRACGMT100UM001 -12 - FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-lo cated or operating in conjunction with any oth er antenna or transmitter.

Navigation menu