R tron NRPCS10D NOTCHCELLRepeater User Manual Manual revised

R-tron Inc. NOTCHCELLRepeater Manual revised

Manual revised

R-TRON Proprietary & Confidential Page 1 1900D NOTCHCELL Repeater System Description SD-UPD10N-04A(V1.2)
R-TRON Proprietary & Confidential Page 2 Copyright Copyright of this manual belongs to R-TRON, Inc. Reproduction, distribution or revision of part or all of contents in this manual in any form without written permission of R-TRON, Inc. is prohibited. Registered Trademark R-TRON are registered trademarks of R-TRON, lnc. Other products and company names mentioned herein this manual might be trade marks or trade names of their respective owners. RF Repeater Band Selective Type Sprint PCS English Copyright © 2004 R-TRON, Inc. All Rights Reserved The results of using the information not mentioned in this manual or the risk of misunderstanding this document remain with the user. The information in this manual is subject to change due to function enhancement, change of design, etc. If you want the modified manual or have any question on this manual, please contact us with information below: Address : Customer Support Center, Jisan IT Venture Bldg., 2/3F, 1004-9/10, Doksan-Dong, Gumcheon-Gu, Seoul 153-829 , South Korea Tel : +82-2-896-4101
R-TRON Proprietary & Confidential Page 3 Revision History Version Date of revision Reason for revision Revision Description V1.0 Dec.01.2004 First Edition V1.1 Dec.17.2004 Second Edition 2.1 System specification 5.12 Connection Ports V1.2 JAN.11.2005 Third Edition 2.1.2 System Features Caution fact addition
R-TRON Proprietary & Confidential Page 4 CONTENTS 1. Overview ----------------------------------------------------------------------------------------------------- 5 2. Repeater Design -------------------------------------------------------------------------------------------- 7 2.1 System specification ----------------------------------------------------------------------------------- 7 2.1.1 Environmental conditions ---------------------------------------------------------------------- 7 2.1.2 System features ---------------------------------------------------------------------------------- 7 3. Repeater Configurations --------------------------------------------------------------------------------- 9 3.1 Main Box------------------------------------------------------------------------------------------------ 9 3.2 PSU Box ----------------------------------------------------------------------------------------------- 10 3.3 Sub Unit Overview ----------------------------------------------------------------------------------- 10 3.3.1 UDC(Up-Down Converter unit) with LNA -------------------------------------------------10 3.3.2 MCPA(Multi Carrier Power Amplifier unit) ----------------------------------------------- 11 3.3.3 ARCU(Advanced Repeater Control Unit board) ------------------------------------------ 12 3.3.4 DPX(Duplexer) --------------------------------------------------------------------------------- 12 3.3.5 PSU(Power Supply Unit) --------------------------------------------------------------------- 13 3.3.6 Heat Module ------------------------------------------------------------------------------------ 13 3.3.7 ARIU(Advanced Repeater Interface Unit board) ------------------------------------------ 14 3.3.8 Arrestor ------------------------------------------------------------------------------------------ 14 3.3.9 EMI/EMC Filter -------------------------------------------------------------------------------- 14 4. Block Diagram --------------------------------------------------------------------------------------------- 15 4.1 Downlink signal path -------------------------------------------------------------------------------- 15 4.2 Uplink signal path ------------------------------------------------------------------------------------ 15 4.3 Band Selective Repeater ---------------------------------------------------------------------------- 15 4.4 Repeater Setup ---------------------------------------------------------------------------------------- 16 5. Board and Unit Descriptions --------------------------------------------------------------------------- 16 5.1 MCPA for downlink --------------------------------------------------------------------------------- 16 5.2 PA for uplink ------------------------------------------------------------------------------------------ 17 5.3 UDC for downlink ----------------------------------------------------------------------------------- 18 5.4 UDC for uplink --------------------------------------------------------------------------------------- 20 5.5 ARCU -------------------------------------------------------------------------------------------------- 22 5.6 ARIU --------------------------------------------------------------------------------------------------- 23 5.7 DPX ----------------------------------------------------------------------------------------------------- 24 5.8 Arrester ------------------------------------------------------------------------------------------------- 26 5.9 PSU ----------------------------------------------------------------------------------------------------- 26 5.10 EMI/EMS Filter ------------------------------------------------------------------------------------- 27 5.11 Heater Module --------------------------------------------------------------------------------------- 28 5.12 Connector Ports -------------------------------------------------------------------------------------- 29 5.12.1 Local OMT port ; Main Box ---------------------------------------------------------------- 29 5.12.2 AC IN; Main Box ---------------------------------------------------------------------------- 29 5.12.3 AC IN; PSU Box ----------------------------------------------------------------------------- 30 5.12.4 DC IN 24V; PSU Box ------------------------------------------------------------------------ 30
R-TRON Proprietary & Confidential Page 5
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 6 1 Overview R-TRON NOTCHCELL repeaters are used to fill out uncovered areas in CDMA1900 mobile systems, such as base station fringe areas, road tunnels, business and industrial buildings, etc. A NOTCHCELL repeater receives signals from a base station, amplifies and retransmits the signals to mobile stations. Also it receives, amplifies and retransmits signals in the opposite direction. Both directions are served simultaneously. To be able to receive and transmit signals in both directions, the repeater is connected to a donor antenna directed towards the base station and to a service antenna directed towards the area to be covered. Control of the repeaters is performed using a desktop or notebook loaded with the R-TRON OMT, Operation and Maintenance Terminal, which can communicate with the repeaters either locally or remotely via wireless data modem. Remote operation can be performed either via CDMA net. Å Installation of antenna Å Installation of Repeater DC Power CableFeeder Line
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 7 To be able to control many R-TRON NOTCHCELL repeaters in common, there is a Sprint EMS center. R-TRON NOTCHCELL Repeaters work as bi-directional amplifiers. A repeater receives, amplifies, and retransmits signals downlink and uplink simultaneously, i.e. from the base station via the repeater to the mobile stations and from the mobile stations via the repeater to the base station. The repeater can be connected to a donor antenna directed towards the base station, and to a distributor antenna directed towards the area to be covered. These antennas are connected to the repeater with type-N connectors. To prevent instability due to poor antenna isolation, R-TRON has developed NOTCHCELL Repeater. R-TRON NOTCHCELL Repeaters become clear of having superiority over the other RF repeaters in the world. The R-TRON NOTCHCELL Repeaters are controlled by powerful microprocessors. Alarm and operational status LEDs are visible on the bottom of the repeater. The repeater works with convection cooling without fan. Operational parameters, such as gain, power levels, alarm condition, Automatic Level Control condition, etc. are set using a desktop or notebook and R-TRON OMT, which communicate, locally via RS-232C cable, with the repeater. Remote operation is performed via CDMA net.
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 8 2 Repeater Design 2.1 System specification 2.1.1 Environmental conditions Item Standard Remark Power supply AC110V±20%, 50/60Hz±5% or +24Vdc battery backup available Operating temperature - 40 ~ +55 ℃ Storage temperature - 40 ~ +70 ℃ Humidity 95 % Consumption power 400 W(Normal), 1200W(Max. In case of the Heater acts at lower temperature) Rainfall 100 mm/Hr Water proof NEMA 4x Wind pressure 60m/s <Table 2-1> Environmental Conditions 2.1.2 System features A. NOTCHCELL repeater Item SPEC Remark Frequency bandwidth 5MHz Toward Handset (Down Link) Toward BTS (Up Link) 1945 ～1950MHz 1865 ～1870MHz Input range (dBm) -55 ～-30dBm(DL), -70 ~-45dBm(UL) Based on 3 carriers DL 40dBm (10W) / Total Max. Output power UL 25dBm (0.31W) / Total Based on 3 carriers Gain range (dB) 70 ~ 95dB Max. gain ±0.5dB Gain control / Interval (dB) 25dB / 1dB Maximum Gain 4dB max. Noise figure Minimum Gain 8dB max. In band flatness 2dB max. Absolute group delay 5㎲ max. Interface RS-232 and Modem VSWR 1:1.5 max. Impedance 50Ω RF connector (Antenna Port) N-Female Main Box 450*635*243mm Size (W x H x D) PSU Box 450*384*265mm Main Box Less than 43Kg(95lbs) Weight PSU Box Less than 25Kg(55lbs) <Table 2-2> Repeater Features
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 9 B. NOTCHCELL Antenna SPEC Item Donor ANT Service ANT Remark Frequency Range 1850 ～1910 MHz, 1930 ~ 1990 MHz Band Width 60MHz, 60MHz V.S.W.R 1:1.5 이하 1:1.5 이하 Gain 17 dBd ±1 dB 17 dBd ±1 dB Half-Beam width (H) 20˚±3˚ 45˚±5˚ Half-Beam width (V) 20˚±3˚ 8˚± 2˚ Front-to-back ratio ≥ 45 dB ≥ 45 dB @180deg First-to-side ratio ≥ 13 dB ≥ 13 dB (Upper) Isolation ≥ 100 dB ANT Distance (Horizontal) ≥1.5m @180±90deg Impedance 50 Ω 50 Ω Polarization Vertical Vertical Max Power 200 W 200 W RF connector 7/16” DIN-female 7/16” DIN-female Size (W*H*D) 700*1000*150 mm 310*1500*120 mm Rated Wind Velocity 60 m/sec 60 m/sec Weight Less than 20 kg(44lbs) Less than 17 kg(38lbs) Radiator Material Copper Copper Radome Material Fiberglass Fiberglass Tilt 0˚~ 15˚ 0˚~ 15˚ <Table 2-3> Antenna Features The repeater is housed in a cast aluminum chassis that is waterproof, class NEMA 4x, for outdoor use. The chassis has a design suited for outdoor use as well as indoor use. The chassis consists of a cabinet and a cover joined with hinges. The cabinet contains the repeater circuitry. Inside the repeater, a number of amplifier boards are individually shielded and located under a metal cover that can be folded out. These amplifier boards are different types depending on the supported system. The followings are the Technical Specification of NOTCHCELL Repeater. CAUTION: The antenna used for this transmitter must not exceed 20.15dBi and must be installed to provide a minimum separation distance of 3 meters from all persons.
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 10 3 Repeater Configurations The repeater system consists largely of the Main Box and PSU Box. The main modules or units of repeater are as follows: DPX (Duplexer), MC PA (Multi Carrier Power Amplifier unit), ARCU (Advanced Repeater Control Unit board), ARIU (Advance Repeater Control Unit board), UDC (Up-Down Converter unit, with LNA), Arrestor, PSU (Power Supply Unit), Heater Module, EMI/EMC Filter. 3.1 Main Box The following is the picture of Main Box. Figure 1 Sub units in a band selective repeater (Main Box) A cabinet for a band selective repeater is equipped with two pair of UDC (with LNA) and PA units, one pair for downlink (DL) and one pair for uplink (UL). The described cabinet is equipped for bi-directional band selective operation. MCPA-UL DL-MCPA UDC-UL UDC-DL DPX-BS DPX-MS ARCU Heat Module Arrestor Arrestor ARIU
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 11 3.2 PSU Box Figure 2 PSU Box 3.3 Sub Unit Overview Functionally, repeaters are built up with several sub units. The sub units of main repeater are as follows: Band selective repeaters can handle multi-carriers over a wide band. The bandwidth is adjustable. A band selective repeater requires two UDC (with LNA) units and two PA units in the repeater. One pair of UDC (with LNA)/PA units is for uplink signaling and one pair is for downlink signaling. 3.3.1 UDC (Up-Down Converter unit) with LNA Figure 3 UDC-UL Figure 4 UDC -DLHeat ModulePSU EMI/EMC EMI/EMC
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 12 UDC converts (Down) a signal received from LNA and gets rid of signal which is out of the bandwidth range, then converts (Up) again into the original frequency range and controls ‘Path Gain’. 3.3.2 MCPA (Multi Carrier Power Amplifier unit) Figure 5 MCPA -UL Figure 6 MCPA -DL CDMA repeaters can be equipped with two MCPA that boosts the output gain with typically 35~40dB. PA (Power Amplifier) amplifies RF signal received from UDC (Downlink) up to 50 dB and its Maximum RF input is 42 dBm in terms of CDMA SFA standards.
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 13 3.3.3 ARCU (Advanced Repeater Control Unit board) Figure 7 ARCU The ARCU board is the control unit of the repeater. The ARCU board is used to supervise and control operational parameters such as gain control, ALC handling, etc. The ARCU takes care of alarms and the event log, password and logon, and many other procedures. 3.3.4 DPX (Duplexer) Figure 8 DPX-BS Figure 9 DPX-MS The Duplexers are located in the lower part of the repeater cabinet. MS and BS duplexers are identical.
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 14 3.3.5 PSU (Power Supply Unit) Figure 10 PSU PSU receives AC 110V (Voltage) from outside and provides DC Power to each unit. In case AC Power shuts down, PSU supplies power to each unit using battery box (+24v) which is connected to ‘BATT IN’ locating under main repeater body. In case AC power is restored, the battery, connected to outside, is converted into being charge with electricity automatically. (Battery Box is optional) 3.3.6 Heat Module Figure 11 Heat Module It installed to maintain stable characteristic of the repeater in cabinet inside in the low temperature. The having fever heat capacity is a maximum 400Watt.
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 15 3.3.7 ARIU (Advance Repeater Interface Unit board) Figure 12 ARIU BTS sends the alarms of Notch repeater and the operator can check and control. 3.3.8 Arrestor Figure 13 Arrestor Arrester uses a semiconductor varistor to protect equipment from lightning. 3.3.9 EMI/EMC Filter Figure 14 EMI/EMC Filter It use to prevent the noise ingredient is radiated with the spurious to happen to the outside in the repeater.
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 16 4 Block Diagram The main signal paths are described in general in the next section and detailed under each block diagram. 4.1 Downlink signal path The downlink signal path, i.e. from the base station through the repeater to the mobile station, is described for NOTCHCELL repeater under the block diagrams on the following pages. 4.2 Uplink signal path The uplink signal path, i.e. from the mobile station through the repeater to the base station, is identical to the downlink path but the other way round. Only some levels and component values differ. 4.3 Band Selective Repeater Figure 15 Block Diagram of Band Selective Repeater Figure 15 shows a block diagram of a band selective repeater. This diagram is applicable to repeaters for CDMA systems. LNA / ULDuplexer/MSControllerWirelessModem(Option)PSU BoxPA / DLACInputRS-232CRepeater State LED:Data:Power12V12V12V12V12V27V27VLNA / DL ATT 1 ATT 2U D C / DLATT 1ATT 2PA / UL UDC / ULDL -30dB Test PortArresterDistributorANTExternal AlarmMain BoxBattery Box(24V, Option)EMI/EMCFILTER PSUBluetooth(Option)-20dBDirectional CouplerArresterDonorANT12VRCULNA / ULDuplexer/MSControllerWirelessModem(Option)PSU BoxDuplexer/BSPA / DLACInputRS-232CRepeater State LED:Data:Power12V12V12V12V12V27V27VLNA / DL ATT 1 ATT 2U D C / DLATT 1ATT 2PA / UL UDC / ULATT 1 ATT 2U D C / DLATT 1ATT 2PA / UL UDC / ULDL -30dB Test PortArresterDistributorANTDistributorANTExternal AlarmBattery Box(24V, Option)EMI/EMCFILTEREMI/EMCFILTER PSUBluetooth(Option)-dBDirectional CouplerDirectional CouplerArresterDonorANTBTS12VRCUUL-30dB Test Port
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 17 4.4 Repeater Setup The repeater parameters can be set locally by means of a desktop or notebook running OMT. The PC is connected to the ARCU via the RS-232 PC port. * Option (Bluetooth Adapter): When it is used, it enables wireless integration 5 Board and Unit Descriptions 5.1 MCPA for downlink RF OUTRF󰚟INGAIN󰚟CONTROLISOLATORDRIVE󰚟AMPMAIN󰚟AMPMAIN󰚟AMPFWD󰚟DETECT REV󰚟DETECTFigure 16 Block diagram of Power Amplifier unit for downlink MCPA amplifies RF signal received from UDC (Downlink) up to 50 dB and its Maximum RF input is 42 dBm in terms of CDMA SFA standards. Connection Port Connected to RF IN RF OUT on the UDC-DL board. RF OUT DL on the DPX-MS duplex filter. CON On the ARCU board CON 27V port on the PSU unit Specification Item Specification Remarks Frequency 1945MHz~1950MHz Bandwidth 5MHz Gain 50±0.5dB Output Power 42dBm I/O Port 1: GND 2: Over Power Alarm Normal: Low
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 18 3: VSWR Alarm 5: Over Temp 6: PA On/Off 7: Cable Open 8: Transmit Power Monitor 9: Reflect Power Monitor Fail: High Mute Function 5V⇒ Off, 0V⇒On Power Detector 0.1 ~ 5V Voltage DC 27V RF connector Type-SMA, female 5.2 PA for uplink Figure 17 Block diagram of Power Amplifier unit for uplink PA (Power Amplifier) amplifies RF signal received from UDC (Downlink) up to 40dB and its Maximum RF input is 27dBm in terms of CDMA SFA standards. Connection Port Connected to RF IN RF OUT on the UDC-UL board. RF OUT UL on the DPX-BS duplex filter. CON On the ARCU board. CON +27V on the PSU unit. Specification Item Specification Remarks Frequency 1865MHz ~1870MHz Bandwidth 5MHz Gain 40±0.5dB Output Power 27 dBm
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 19 I/O Port 1: GND 2: Over Power Alarm 3: VSWR Alarm 5: Over Temp 6: PA On/Off 7: Cable Open 8: Transmit Power Monitor 9: Reflect Power Monitor Normal: Low Fail: High Mute Function 5V⇒ Off, 0V⇒On Power Detector 0.1 ~ 5V Voltage DC 27V RF connector Type-SMA, female 5.3 UDC for downlink Figure 18 Block diagram of Up-Down converter unit for downlink The above product is Un-Down Converter for Downlink and it is composed of three parts (Down Converter, IF and Up Converter) Down Converter Down Converter consists of RF level detector, BPF, Digital Atten, AMP and Analog Atten, Mixer. RF level detector converts RF signal into DC, which is able to detect signal level. The first BPF removes signal out of required bandwidth among the inputted signal from LNA and AMP compensates the loss from the first BPF. Digital Atten, which is connected to Controller, operates to control Path Gain. Analog Atten is used for minute control of Path Gain. Mixer converts RF into IF (IF-70MHz) IF IF is composed of Filter (LPF and SAW) and AMP. LPF removes spurious signal which is higher passing band and SAW Filter gets rid of unwanted signal which is out of required bandwidth. AMP compensates loss which occurs when signal passing through Filter.
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 20 Up Converter Up Converter consists of Mixer, AMP, BPF, Digital Atten, Analog Atten and RF level detector. Mixer is used to convert IF (70 MHz) to Down Link Path RF Frequency. BPF is to remove signal out of service range. Digital Atten operates connected to controller to control Path Gain. LNA Figure 19 Block diagram of Low Noise Amplifier unit for downlink. This product is a low noise amplifier used for NOTCHCELL downlink. It is generally composed of RF block and Fault block (Alarm circuit). RF block has approximately 30dB gain at CDMA1900 through 3-stage amplification, and its noise index is 0.9dB. Fault block is a circuit that detects current flowing in each TR of RF block. Fault circuit detects current flowing in 1st stage TR and 2nd & 3rd stage TRs. If TR current is less or more than set value due to the change of LNA environment, it generates TTL signal (5V). Connection Port Connected to RF IN DL on the DPX-MS. RF OUT RF IN on the PA-DL unit. CON On the ARCU board CON On the PSU unit. Specification Item Specification Remarks Frequency 1945MHz ~1950MHz) Bandwidth 5MHz Gain 24~49dB±0.5dB Att. : 25dB Voltage DC 12V RF connector Type-SMA, female
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 21 5.4 UDC for uplink Figure 20 Block diagram of Up-Down converter unit for uplink The above product is Down Converter for Uplink and it is composed of three parts (Down Converter, IF and Up Converter) Down Converter Down Converter consists of RF level detector, BPF, Digital Atten, AMP and Analog Atten, Mixer. RF level detector converts RF signal into DC, which is able to detect signal level. The first BPF removes signal out of required bandwidth among the inputted signal from LNA and AMP compensates the loss from the first BPF. Digital Atten, which is connected to Controller, operates to control Path Gain. Analog Atten is used for minute control of Path Gain. Mixer converts RF into IF (IF-70MHz) IF IF is composed of Filter (LPF and SAW) and AMP. LPF removes Spurious signal which is higher passing band and SAW Filter gets rid of unwanted signal which is out of required bandwidth. AMP compensates loss which occurs when signal passing through Filter. Up Converter Up Converter consists of Mixer, AMP, BPF, Digital Atten, Analog Atten and RF level detector. Mixer is used to convert IF (70 MHz) to Down Link Path RF Frequency. BPF is to remove signal out of service range. Digital Atten operates connected to controller to control Path Gain. LNA
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 22 Figure 21 Block diagram of Low Noise Amplifier unit for downlink. This product is a low noise amplifier used for NOTCHCELL downlink. It is generally composed of RF block and Fault block (Alarm circuit). RF block has approximately 30dB gain at CDMA1900 through 3-stage amplification, and its noise index is 0.9dB. Fault block is a circuit that detects current flowing in each TR of RF block. Fault circuit detects current flowing in 1st stage TR and 2nd & 3rd stage TRs. If TR current is less or more than set value due to the change of LNA environment, it generates TTL signal (5V). Connection Port Connected to RF IN UL on the DPX-MS. RF OUT RF IN on the PA-UL unit. CON On the ARCU board CON On the PSU unit. Specification Item Specification Remarks Frequency 1865MHz ~ 1870MHz) Bandwidth 5MHz Gain 34~59dB±0.5dB Att. : 25dB Voltage DC 12V RF connector Type-SMA, female
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 23 5.5 ARCU Figure 22 Block diagram of ARCU The ARCU board is the central board in the repeater, located in the repeater cabinet. The ARCU board contains a microprocessor, main memory, flash memory for the ARCU software, NVRAM memory for parameters and the event log , ports for local and remote communication, battery powered real-time clock, etc. The ARCU board is used to supervise and control operational parameters such as gain control, ALC handling, etc. The ARCU takes care of alarms and the event log, password and logon, and many other procedures. The real-time clock on the ARCU board is used for alarm and for the event log. Connection Port Connected to J1 On the PSU board. J2 On the PA-DL unit. J3 On the PA-UL unit J4 On the UDC-UL, UDC-DL unit J5, J5-1 On the UDC-UL unit J6, J6-1 On the UDC-DL unit J7 On the door J7-1 Not used J9, J9-1 On the W/M (Wireless Modem)
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 24 J11 On the PSU board J12 RS-232 (Local OMT) on the bottom of repeater J13 Consol for microprocessor. J16 LAN for microprocessor J21 Not used 5.6 ARIU Figure 23 Block diagram of ARIU ARIU Module does to do WNMS interconnection function through ARCU and Wireless Modem (Expedite C201). Specification Item Specification Remarks Power Requirements DC 4.2V, DC3.3V Regulator MIC29502BU RS232 Converter MAX3233
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 25 5.7 DPX Figure 24 Block diagram of DPX The Duplexers are located in the lower part of the repeater cabinet. MS and BS duplexers are identical. Connection DPX-MS Port Connected to ANT Distributor ANT on the bottom of repeater DL RF OUT on the PA-DL unit UL RF IN on the UDC (with LNA)-UL unit MON MON on the bottom of repeater or other Units DPX-BS Port ` Connected to ANT DONOR ANT on the bottom of repeater DL RF IN on the UDC-DL unit UL RF OUT on the PA-UL unit MON MON on the bottom of repeater or ANT on the wireless Modem Unit Specification DPX-MS, DPX-BS Item Specification Remarks DL: 1945.625MHz~1949.375MHz Frequency UL: 1865.625MHz~1869.375 MHz Bandwidth 3.75 MHz Insertion loss 1.2dB Flatness 1.0dB
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 26 Separation between DL/UL frequency 100dB RF connector Type-SMA, female Coupling value Coupling: 20dB, 30dB, 40dB±2dB, Monitoring: 30dB±2dB VSWR 1:1.3
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 27 5.8 Arrestor Figure 25 Block diagram of Arrestor Arrester uses a semiconductor varistor to protect equipment from lightning Specification Item Specification Remarks Frequency 1800MHz~2000MHz Bandwidth 200MHz Insertion loss 0.2dB VSWR 1:1.2 Surge current 1.2 x 50㎲ , 6 kV / 3 kA RF connector Type-N, female 5.9 PSU Figure 26 Block diagram of PSU PSU receives and converts input power (AC 110V) into DC +27V or +12V. In case PSU is connected to outside Battery, it provides automatic power back-up function when AC power input is shut off. When power level of a
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 28 storage battery is lower than +21V (±1.0V), battery input power is shut down to protect battery and it is how to Prevent the storage batter from the over-discharge. The output power, as converting into AC_IN/Battery of Battery/AC_IN, operates in a proper way and supply the stable power until the over-discharge function works. Specification Item Input Output 27V 12V Voltage AC110v ±20% 50/60Hz ±5% Output Voltage Variation Ratio: less than ±2% AC / DC Current 15A 7A Efficiency More than 80% Power factor More than 90% AC fail DC fail Alarm Battery fail Normal: Low, Abnormal: High 5.10 EMI/EMC Filter Figure 27 Block diagram of EMI/EMC Filter EMI/EMC Filter in all entrances of PSU Box prevents that various spurious and consecutiveness noise ingredients that happen in Repeater are radiated to outside.
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 29 It should be as most as possible near with power input/output port, and Wires do so that to do not become overlap each other. Also, must do so that high frequency resistance may minimize in grounding paper as possible when do mounting to Repeater. When fix EMI/EMC Filter to metal case for this, after improving electricity conductibility removing coats of paint of contact part, do to ground in the nearest distance coming ground connection terminal. In case of use continuously exceeding rating current or use exceeding operating temperature, its performance and reliability are fallen. Specification Item Specification Remarks Rated Voltage 250V AC/DC Rated Current 20A Rated Frequency 50/60Hz Leakage Current 0.75Ma max. at 250V AC 50/60Hz Insulation Resistance 200MΩ min. AT 500V DC Test Voltage AC 2000V between line to earth for 1 minute Operating Temperature -25℃ ~ +85℃ 5.11 Heater Module Figure 28 Block diagram of Heater Module Heater Module attached inside Main Box and PSU Box for normal action of equipment in limit low temperature state because Repeater's operating temperature condition is '- 40 to -55℃'. Specification Item Specification Remarks Input Power AC100V +/-20% 50/60Hz +/-5% Current 5A max.
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 30 Act: Board temperature below +15℃±5 Heater Operating Temperature Stem by: Board temperature Higher than +20℃ Heating Power 400watt Size 285 ×157 × 55 5.12 Connection Ports 5.12.1 Local OMT port ; Main Box PC port RS-232 is a LOCAL OMT port used for local PC communication. The connector is found to the bottom of the cabinet. LOCAL OMT is a 3-pole MS connector. Figure 29 LOCAL OMT - PC connector pinning A: Data from repeater to OMT B: Data from OMT to repeater C: GND 5.12.2 AC IN ; Main Box MS20-3P, Male A PE B L C N ABC
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 31 5.12.3 AC IN ; PSU Box MS22-2, Male A PE B L C N 5.12.4 DC IN 24V ; PSU Box *Use at DC power (or Battery) connection necessity by Backup in case of is shut off AC. MS24-12, Male A + B Not used C - D Not used E Not used
System Description NOTCHCELL Repeater R-TRON Proprietary & Confidential Page 32 NOTCHCELL Repeater System Description Copyright © 2004 R-TRON, Inc. All Rights Reserved Copyright of this manual belongs to R-TRON, Inc. Reproduction, distribution or revision of part or all of contents in this manual in any form without written permission of R-TRON, Inc. is prohibited. The information in this manual is subject to change for the reason of function improvement, design alteration, etc. without any prior notification. 󰚟

Navigation menu