RAE Systems BWS1 Honeywell BW Solo User Manual
RAE Systems, Inc Honeywell BW Solo
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3980088 |
| Application ID | F08pIot0Yh5iMlGSf8Er3w== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 64.76kB (809554 bits) |
| Date Submitted | 2018-08-28 00:00:00 |
| Date Available | 2018-08-28 00:00:00 |
| Creation Date | 2018-08-17 09:09:01 |
| Producing Software | GPL Ghostscript 8.15 |
| Document Lastmod | 2018-08-17 09:09:01 |
| Document Title | Microsoft Word - BW Solo Genearl Description( for FCC) |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | e828357 |
Honeywell BW Solo User Manual 1. Reading before use This manual must be carefully read by all individuals who have or will have the responsibility of using, maintaining, or servicing this product. The product will perform as designed only if it is used, maintained, and serviced in accordance with the manufacturer’s instructions. The user should understand how to set the correct parameters and interpret the obtained results. 2. Warnings To reduce the risk of electric shock, turn off power before removing the monitor cover. Disconnect the battery before removing sensor modules for service. Never operate this monitor while the cover is removed. Remove monitor cover and sensor modules only in an area known to be non-hazardous. Sensors are not interchangeable; use only RAE Systems sensor, and use only the sensor type specified for your monitor. Use only RAE Systems batteries. Use of non-RAE Systems components will void the warranty and can compromise the safe performance of this product. Warning: Substitution of components may impair Intrinsic Safety. Warning: Use only the RAE P/N 500-0160-000 battery. Warning: Batteries must only be changed in a safe area free of hazardous gas. Calibrate only in a safe area that is free of hazardous gas in an atmosphere of 20.9% oxygen. Use only a sensor specially designed for the SOLO model. WARNING: DO NOT CHANGE BATTERY IN A HAZADOUS LOCATION. AVERTISSEMENT: AFIN DE PRÈVENIR L’INFLAMMATIOM D’ATMOSPHÈRES DANGEREUSES, NE CHANGER LES BATTERIES QUE DANS DES EMPLACEMENTS DÈSIGNÈS NON DANGEREUX 3. Regulatory compliance Caution: This device complies with Part 15 of the FCC Rules / Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditionssuivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur del'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage estsusceptible d'en compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. 4. General information BW Solo (product name) is single gas monitor, it includes 20 kinds of gas measurement gas sensor type which is described as below. Sensor List Target Gas Type Brand CO Whittle CO RAE H2S Whittle H2S CiTiceL H2S RAE O2 Whittle O2 CiTiceL CL2 Sensoric H2 CiTiceL CO-H Alpha SO2 CiTiceL HCN Alpha O3 Sensoric ETO Alpha PH3 CiTiceL NO2 CiTiCel NO Alpha CLO2 Sensoric NH3 Sensoric 5. Product outlines Alarm indication LED Warning indication LCD Alarm indication Buzzer Sensor Button 6. Product Features BW Solo specification: 1. Size: whittle version: 70*66.5*24mm, 4R version: 70*66.5*30mm; 2. Working Temperature: -40°C to +60°C; 3. Working Atmospheric Pressure: 80kPa to 120kPa BW solo function provides: 1. Single gas measurement depends on installation sensor; 2. Alarm indication: Light Band (6 red LEDs) and 3 window indication at top of instrument, sound alarm with buzzer, vibration by internal vibrator; 3. Warning indication: Triangle symbol light beside LCD; 4. LCD display show sensor reading and information; 5. One button operation for setting, information check, calibration; Communication: IR is interface to intellidox (calibration equipment name), BLE is interface to mobile and PC which provide data transfer and instrument configuration. For android systems application, BW Solo provide passive NFC for BLE pairing 7. Operation Hold and timeout duration preferences This table provides the interaction pattern to be implemented globally across the Clydesdale software development. Any previously documented settings are overruled by the table below.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 7 Producer : GPL Ghostscript 8.15 Create Date : 2018:08:17 09:09:01 Modify Date : 2018:08:17 09:09:01 Title : Microsoft Word - BW Solo Genearl Description( for FCC) Creator : PScript5.dll Version 5.2.2 Author : e828357EXIF Metadata provided by EXIF.tools