RBH SOUND BT-100 Audio power amplifier User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3603711
Application ID	+FjJ67WQGlehpjJRXbuJyQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	57.85kB (723181 bits)
Date Submitted	2017-10-12 00:00:00
Date Available	2017-10-13 00:00:00
Creation Date	2017-05-25 12:45:04
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-09-30 11:05:44
Document Title	User Manual
Document Creator	Adobe InDesign CC 2017 (Windows)

BT-100
Bluetooth Stereo Amplifier
®
OWNER’S MANUAL
Important Safety Instructions
The lightning flash with the arrowhead symbol within an equilateral triangle,
is intended to alert the user to the presence of un-insulated “dangerous
voltage” within the product enclosure that may be of sufficient magnitude
to constitute a risk of shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
When using your amplifier basic safety precautions should always be followed to reduce the
risk of fire, electric shock, and injury.
1. Do not open the amplifier, attempt any modifications or repairs. There are extremely
high voltages present and any servicing must be referred to RBH or an authorized
qualified technician.
2. Opening the amplifier will void the warranty.
3. To prevent shock or fire hazard, never permit moisture or any liquid to get into the amplifier.
If an accidental spill occurs, immediately shut off the power, unplug its AC power cord
and seek a qualified technician for repair.
4. To reduce the risk of electric shock, do not remove the cover (or back). No user serviceable
parts inside of amplifier.
5. All safety instructions should be read before this amplifier is operated. Please retain these
safety instructions for future reference. All warnings on the amplifier and in this manual
should be adhered to.
6. The amplifier should be placed so its location or position provides proper ventilation on
all sides of the amplifier on a solid surface.
7. The amplifier should only be connected to a power supply type described in this manual
or as marked on the amplifier.
8. Power supply cords should be routed so they will not be pinched or walked on.
9. The amplifier should never be exposed to any liquids of any kind or objects filled with
liquids (vases or plants)
This product contains magnetic material. Please contact your physician if you
have any questions on whether this might affect the operation of your implantable
medical device.
This product conforms to all applicable EU directive requirements.
RECYCLING: This product’s packaging materials are recyclable and can be reused.
This product and the accessories packed together are the applicable product to
the WEEE directive except batteries. Please dispose of any materials in accordance
with your local recycling regulations. When discarding the unit, comply with your
local rules or regulations. Batteries should never be thrown away or incinerated but
disposed of in accordance with your local regulations concerning chemical wastes.
Introduction
Congratulations on your purchase of RBH BT-100 Bluetooth® Stereo Amplifier! We recommend
you thoroughly read through the material contained in this manual before connecting your
amplifier. This will ensure you have a good understanding of how to setup your amplifier for
optimum performance and allow for years of listening enjoyment. The BT-100 features aptX®
CODEC technology thus allowing enjoyment of much higher quality sound when connected
to any Bluetooth® aptX® enabled device.
BT-100 Bluetooth Stereo Amplifier
®
AMPLIFIER
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Bluetooth® Pairing Button
Power Indicator
Bluetooth® Indicator
Optical Indicator
Line In Indicator
AUX Indicator
Remote Sensor
Volume Knob/Input Selector
Headphone/Earphone Jack
Antenna
AUX In L/R
SUB Out
Line Out
Line In
Optical Input
Speaker Output - L/R
Speaker Output + L/R
Power Input
On/Off Switch
AMPLIFIER REMOTE:
1. On/Off Button
2. Optical Source
3. Volume +/4. Previous/Next
5. Line In Source
6. Play/Pause
7. AUX Source
8. Mute
9. Bluetooth® Source
Care and Cleaning
To maintain the amplifier’s appearance, it is recommended use of a dry or slightly-damp soft
cloth to keep the exterior of the amplifier free from dust, lint or dirt. When cleaning the
amplifier, make sure the amplifier is turned off.
Connecting and Operating the Amplifier
CONNECTING THE AMPLIFIER:
• Connect your self-powered
subwoofer to SUB OUT.
• Connect your CD player or
other media player with an
RCA cable to the AUX IN L/R
input. Make sure you connect
the “L” plug to the left input
channel and the “R“ plug to
the right input channel.
• Connect an additional external
amplif ier with an 1.8-inch
stereo cable to the LINE OUT.
• Connect a portable device such as a phone, tablet or media player with an 1/8-inch stereo
cable to LINE IN.
• Connect your DVD player or other optical digital audio source with an SPDIF optical cable
to the OPTICAL IN input.
• Connect your speakers to the SPEAKERS OUTPUT. Make sure you connect the -/+ and the
L/R cables to the correct output.
NOTE: Remember to select the desired source by either pressing the Volume Knob/Input
Selector button or by aiming the remote control at the amplifier and pressing the desired
source button. See illustration of remote control on previous page.
OPERATING THE AMPLIFIER:
1.
2.
3.
4.
5.
6.
7.
Connect the power cord to the back of the amplifier then connect it to a power outlet.
Connect your devices to a suitable input, see the illustration above.
Turn the power switch to the On position; the unit will enter working status and the
power indicator LED will turn orange and will default to the Bluetooth® input when turned
on for the first time.
Press the Bluetooth®, OPT, LINE or AUX button on the remote or press the amplifier’s
volume knob to choose an audio source, see illustration of remote on the previous page.
Control the playback via the remote control.
WARNING: The amplifier will shut off automatically if the temperature exceeds 85°C,
and the power indicator will turn orange. The amplifier will re-start automatically when
the temperature has dropped below 60°C ±10°.
To put the amplifier into standby mode, push the power button on the remote control or
hold down the volume control knob on the amplifier for 2 seconds. The power LED will
turn red.
To take the amplifier out of standby mode, push the power button on the remote or hold
down the volume control knob for 2 seconds. The amplifier will default to last previously
used input.
BLUETOOTH PAIRING:
1.
2.
3.
Press the Bluetooth® button () on the BT-100 to switch to the Bluetooth® input and
activate pairing mode (Bluetooth® input LED will flash quickly).
Activate Bluetooth® on your phone or tablet and scan for new Bluetooth® devices.
When your phone or tablet finds “RBH BT-100”, choose this unit to begin pairing.
FCC Interference Statement
Federal Communication Commission Interference Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. To
comply with FCC’s and Industry Canada’s RF radiation exposure limits for general population/
uncontrolled exposure, this device must be installed to provide a separation distance of at
least 20cm from all persons. This device must not be co-located or operating in conjunction
with any other antenna or transmitter.This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
IC STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1)
l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement.
The device is compliance with RF field strength limits, users can obtain Canadian information
on RF exposure and compliance.
Le présent appareil est conforme de ce matériel aux conformités ou aux limites d’intensité
de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité
d’acquérir les informations correspondante.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Specifications
Model
BT-100
Power Supply:
AC 110V ~ 240V 50/60Hz
Rated Output Power:
100W (50W x 2) @ 4 Ohms
50W (25W x 2) @ 8 Ohms
Frequency Response:
20Hz ~ 20kHz
Minimum Impedance:
4 Ohms
Bluetooth®/DSP:
Bluetooth 4.1 Qualcomm® aptX™ CODEC Technology/
24 bit Qualcomm® Kalimba™ DSP
Bluetooth® Range:
33 feet (10 Meters)
Dimensions:
7-1/2” W x 5-1/2” D x 2” H (190mm W x 139mm D x 52mm H)
Weight:
2.87 lbs. (1.3 Kg)
Troubleshooting
Situation:
Probable Cause:
No power.
1. Power cord is disconnected.
2. Poor connection at the power socket or the power
socket is inactive.
No sound.
1. Switch source input from Bluetooth® to Optical, or any other
source, and back to Bluetooth® to refresh the signal connection.
2. The speakers are disconnected.
3. Volume control set to lowest setting.
4. Check for damaged signal cables.
5. Check if the LEDs are blinking. If not, power cycle the amplifier
and ensure the LED display is in standby. If the amplifier still
doesn’t work, contact RBH Sound Customer Service.
Suddenly no sound 1. Check if the audio source works.
during operation. 2. Product may have entered into over-heat protection mode, check
if LED is orange. If orange, let amplifier cool down and it will
automatically restart.
Poor sound.
1. Audio source problem.
2. Bad or incorrect speaker connection.
LED off.
1. Check if the amplifier is connected to the power outlet, confirm
power with a voltage meter.
Unable to pair
Push the Bluetooth® pairing button after amplifier is powered on.
Bluetooth® device. See illustration on page 2 for location of Bluetooth® pairing button.
Warranty
Your RBH BT-100 Bluetooth® Amplifier is covered by a limited warranty against defects
in materials and workmanship for a period of 1 year from the original date of purchase.
This warranty is provided by the authorized RBH Sound dealer or factory, wherever the
amplifier was purchased. Warranty repair will be performed only when your purchase
receipt is presented as proof of ownership and date of purchase. Defective parts will be
repaired or replaced without charge by your dealer’s store or the location designated by
RBH Sound authorized to service RBH Sound products. Charges for unauthorized service and
transportation cost are not reimbursable under this warranty. This warranty becomes void
if the product has been damaged by alteration, misuse or neglect. RBH Sound assumes no
liability for property damage or any other incidental or consequential damage whatsoever
which may result from the failure of this product. Any and all warranties of merchantability
and fitness implied by law are limited to the duration of this express warranty. Some states
do not allow limitations on how long an implied warranty lasts, so the above limitations
may not apply to you. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not apply to you.
Warranty Registration
Please fill out and submit the registration form found online at http://rbhsound.com
to register your amplifier.
TM
Redefining the Way You Experience Sound.
382 Marshall Way, Suite A, Layton, Utah • USA • 84041
Toll Free: (800) 543-2205 • Fax: (801) 543-3300
http://rbhsound.com
The aptX® mark and the aptX logo are trademarks of Qualcomm Technologies International, Ltd.
and/or its affiliated companies and may be registered in one or more jurisdictions
Bluetooth® is a registered trademark of Bluetooth® SIG.
It is the policy of RBH Sound to continuously incorporate improvements into products. All specifications
are subject to change without notice. Copyright 2017 RBH Sound. All rights reserved.
©

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:05:25 12:45:04-06:00
Creator                         : Adobe InDesign CC 2017 (Windows)
Modify Date                     : 2017:09:30 11:05:44+08:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Instance ID                     : uuid:dc1042b3-d0fc-4ae0-95ad-7b0b1a0b5c95
Original Document ID            : adobe:docid:indd:2b7d85f9-a2ec-11e3-9949-b029bb1b5d04
Document ID                     : xmp.id:f31e77cb-666a-6247-963d-c6f27ca312af
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:c3738cfd-d71d-6941-baff-a3732dc8649c
Derived From Document ID        : xmp.did:514da4c3-ac0f-3444-9199-6d4b6ed7711d
Derived From Original Document ID: adobe:docid:indd:2b7d85f9-a2ec-11e3-9949-b029bb1b5d04
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Windows)
History Changed                 : /
History When                    : 2017:05:25 12:45:04-06:00
Metadata Date                   : 2017:09:30 11:05:44+08:00
Creator Tool                    : Adobe InDesign CC 2017 (Windows)
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 8

EXIF Metadata provided by EXIF.tools