RCA CC4271 User Manual CAMCORDER Manuals And Guides L0201168

RCA Compact VHS C Camcorder Manual L0201168 RCA Compact VHS C Camcorder Owner's Manual, RCA Compact VHS C Camcorder installation guides

User Manual: RCA CC4271 CC4271 RCA CAMCORDER - Manuals and Guides View the owners manual for your RCA CAMCORDER #CC4271. Home:Electronics Parts:Rca Parts:Rca CAMCORDER Manual

Open the PDF directly: View PDF .
Page Count: 68

ncA

camcorder

user's guide

CC4271

Important Safety Information

Be sure to read all the safety information before you begin to use this product.

I WARNING: To reduce the risk of fire or shock hazard, do not expose I

camcorder or AC adapter/charger to rain or moisture.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates "dangerous voltage"

inside the product that presents a risk of electric

shock or personal injury.

NE PAS OUVRIR

This symbol indicates important instructions

accompanying the product.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER

(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

Cautions

CAUTION: To prevent electric shock, match wide blade of plug to

wide slot, fully insert.

ATTENTION: Pour 6viter les chocs 61ectriques, introduire la lame

la plus large de la fiche dans la borne correspondante de la prise et

pousser jusqu au fond.

To reduce risk of injury, charge only rechargeable batteries recom-

mended by the manufacturer for this camcorder. Other types of

batteries may burst causing damage and personal injury.

FCC Regulations state that unauthorized changes or modifications to

this equipment may void the user's authority to operate it.

Product Registration

Please fill out the product registration card and return it immediately.

Returning this card allows us to contact you if needed.

Keep your sales receipt for proof of purchase to obtain warranty parts

and service and attach it here. Record the serial number and model

numbers located on the bottom of the camcorder.

Model No:

Serial No:

Purchase Date:

Purchased From:

CC4271

We want to make sure you enjoy your new camcorder. If you have any

questions, call:

Cnmeorder Exchange Warranty ........... 800-283-6503 (pages 60-6I)

Customer Service ................................... 800-336-1900 (page 59)

Accessories ............................................. 800-338-0376 (pages 45-51)

Safety Information .............................. i

First Time Operation

•Assistance ....................................... 3

• Unpack the Camcorder and

Accessories ................................. 3

• Attach the Adapter/Charger ............ 4

• Adjust the Handstrap, Remove

Lens Cap, and Attach

It to the Handstrap ....................... 4

• Insert a Tape .................................... 5

• Turn on the Camcorder ................... 5

• Adjust the Viewfinder and

Eyepiece Focus Control ............. 6

• Set LIGHTAUTO/OFF/ON

Switch to AUTO ......................... 7

• Start and Stop Recording ................ 7

• Play Back What you Have

Recorded .................................... 8

• Set the CAMERA/OFF/VCR

Switch to OFF ............................ 8

• Replace the Lens Cap ...................... 8

• Review Camcorder's

Operating Controls ................ 9-10

Attach the Shoulder Strap .............. 11

Built-In Color Enhancement

Light .................................... 12-13

Power Your Camcorder

•Use the Adapter/Charger to

Power Your Camcorder ............ 14

• Use the Battery to Power

Your Camcorder .................. 15-18

• Charge the Battery .................... 15

•Attach the Battery ..................... 16

•Battery Level Indicator ............. 17

•Battery Care .............................. 18

•Battery Storage ......................... 18

•Battery Safety Precautions ....... 18

• Use the Optional DCC096

Car Cord Adapter ..................... 19

Videocassettes

• Erase Protection ............................ 20

• Record and Playback

Speed and Times ...................... 20

•Insert and Remove Cassettes ........ 21

• Cassette Care and Storage ............. 21

(continued on next page)

1

DateandTimeDisplay

•Set the Time and Date ................... 22

• Record Time and Date, AUTO

Date, Auto TITLE, or Date ......... 23

• Charge the Built-in Clock

Battery ...................................... 23

Recording

• Use the Viewfinder ................... 24-25

•Viewfinder Displays ................. 26-27

•DISPLAYButton ........................... 28

• Microphone ................................... 28

• Auto Shoff M Feature ..................... 28

• Camera Edit .................................. 29

• Quick Review Feature ................... 29

• Auto Focus .................................... 29

• Macro Focus .................................. 29

• Tape-Remaining Display ............... 30

• Electronic Indexing ....................... 30

• Zooming ........................................ 31

• Fade In and Out of Scenes ............ 32

• Steady Pix TM Feature .................... 33

• Tape Counter ................................. 34

• Titler ......................................... 35-37

Playback

• Viewfinder Playback and Playback

Features ............................... 38-39

• Play Back a Tape in the

Viewfinder ........................... 38-39

• Playback Features ..................... 39

• Tape Positioning ................... 39

• Stop-Action Pause ................ 39

• Visual Searching ................... 39

• Tracking ................................ 39

• Playback on TV (or VCR) with

Audio/Video Inputs ............. 40-41

• Playback on TV Without

Audio/Video Inputs ............. 42-43

Travel and Recording

Tips ........................................... 44

Optional Accessories ................... 45-51

• Optional Accessories ................ 45-47

• Remove Lens Hood to

Attach Accessory Lens ............. 48

• Accessory Order Form ............. 49-51

Trouble Checks ........................... 52-54

Information to User ......................... 55

Care and Maintenance

•Clean the Camcorder ..................... 56

•Clean the Camcorder's Lens ......... 56

•Clean the Camcorder's

Viewfinder ................................. 56

•Proper Care and Storage ............... 57

• Things to Avoid ............................. 57

Specifications .................................... 58

Customer Assistance ........................ 59

Limited Warranty ....................... 60-61

Index ............................................ 62-65

This section describes the basic steps necessary to set up your camcorder to record.

Refer to the other sections for detailed operation and feature options.

Assistance

The toll-free numbers are available to help you with any problem you may encounter.

Camcorder Exchange Warranty ............... 800-283-6503

Customer Service ................................... 800-336-1900

Accessories ............................................. 800-338-0376

.Unpack the camcorder and accessories.

• Save the packing materials and box in case you ever need to ship

or store your camcorder.

• The items shown below are packed with your camcorder. If any

are missing or appear damaged, contact your dealer immediately.

Model CC4271 Rechargeable I 0-Volt Battery

Stock No. EP096FS

AC Adapter/Charger: Stock No. 241044

DC Cable: Stock No. 241308

Shoulder Strap

Stock No. 241305 or

Stock No. 227327

(continued on next page)

3

2. Attach the adapter/charger.

To AC 120V,

50/60 Hz

o

Adapter/

Charger

DC Cable DC IN 9.6V

Jack

Since the battery must be charged

before it can be used the first time,

attach the adapter/charger to the

camcorder.

1. Attach one end of the adapter/

charger's DC cable to the DC

OUTPUT jack on the side of the

adapter/charger.

2. Attach the other end of the cable

to the DC IN 9.6V jack on the

camcorder.

3. Plug the adapter/charger's plug

into an operating outlet.

4. Details are on page 14.

Adjust the handstrap, remove lens cap, and attach

it to the handstrap.

on

Handstrap

1. Open the handstrap, insert your

hand, and adjust the handstrap to

fit your hand.

2. Remove the lens cap and attach it

to the handstrap as shown.

4. Insert a tape.

STOP/EJECT

Button

Safety Tab

Tape Windows

Cassette

_Cassette Door

Press Here to Close

1. Press STOP/EJECTto open the

cassette compartment.

2. Insert the cassette with the safety

tab facing up and the tape windows

facing out.

3. Press the cassette down gently

until it locks into place, and close

the cassette compartment door.

4.Details are on page 21.

5. Turn on the camcorder.

Switch

Note: If you want the date and

time displayed on your

recordings, you must set it.

See Date and 7_me Display on

pages 22-23.

• Press and hold the small button on

the CAMERA/OFF/VCR switch

while you slide it to CAMERA.

The camcorder enters record-

pause.

• The position of this switch tells

the camcorder whether you want

to record (CAMERA), turn the

power off (OFF), or play back

tapes (VCR).

• The camcorder automatically

turns off if it remains in record-

pause for five minutes. Place

the switch to OFF and then back

to CAMERA.

(continued on next page)

5

Electronic

Viewfinder (Grasp

here to

Eyepiece Focus

Control

BRIGHT

6. Adjust the viewfinder and eyepiece focus control.

• Grasp the viewfinder and rotate it

horizontally.

•Pull the viewfinder out from the

camcorder and rotate the eyepiece

into a comfortable viewing

position.

• Turn the eyepiece focus control to

adjust the focus of the viewfinder

for your vision.

• Adjust the brighmess of the image

in the viewfinder by turning the

BRIGHT control.

RE C/PA USE

LIGHT AUTO/OFF/ON Switch

7. Set the LIGHTAUTO/OFF/

ON switch to AUTO.

•The color enhancement light helps

you create brighter and sharper

images.

• Set the LIGHTAUTO/OFF/ON

switch to AUTO if you want the

color enhancement light to turn on

automatically when you aim the

camcorder at a dark object and

turn offwhen you aim it at a

bright object.

•Details are onpages 12-13.

.Start and stop recording.

•Press and release the REC/PAUSE

button to start recording. REC

appears in the viewfinder when

the camcorder is recording.

• Press and release the REC/PAUSE

button again to stop recording.

The camcorder is now in the

record-pause mode ( II appears in

the viewfinder when the

camcorder is in record-pause).

(continued on next page)

7

CAMERA/

OFF/VCR

REW/ PLAY

RE VIE WButton STOP/

EJECT

Button

RE C/PA USE

Lens Cap_

9. Play back what you have

recorded.

1. Press the REC/PAUSE button to

pause recording.

2. Press and hold the small button

on the CAMERA/OFF/VCR

switch while you slide it to VCR.

3. Press REW/REVIEWto rewind

the tape.

4. Press PLAYto play back the tape.

5. Press STOP/EJECTwhen you are

finished playing back the tape.

Details on viewfinder playback are

on pages 38-39.

10. Set the CAMERA/OFF/VCR

switch to OFF to turn off the

camcorder.

11. Replace the lens cap.

12. Review camcorder's operating controls.

[

DISPLAY Button

RESET Button

DATE/TIME Button

TITLER Button

CAMERA/

OFF/VCR

Switch

RE W(R ewind)/RE VIE WButton

(Also -Button)

PLA Y Button

EFWD (Fast Forward)

Button

(Also + Button)

STOP/EJECT

Button

(Also EDIT-ADV

Button)

Light

Microphone

Button

Lens Hood_

Lens --

Lens Cap

FADE

Button

LIGHT

ON Switch

Reset Switch

VIDEO, RF DC, and AUDIO

OUT Jacks (Located Behind

Small Cover)

(continued on next page)

12. Review camcorder's operating controls. (continued)

Eyepiece

Focus

Control

BRIGHT Control

(on Bottom of

Viewfinder

Shoulder Strap

Attachment Ring

BATTERY

EJECT

Button

Attach

Rechargeable

DC IN 9.6V

Jack

Handstrap

with Lens

Cap Holder

Attach Adapter/

Charger's DC

Cord Here

Shoulder Strap

Attachment Ring

Cassette Door

(Press here to

close.)

Power Zoom Buttons

(Wand T)

Also TRACKING

Buttons

10

Attach the Shoulder Strap

The camcorder's shoulder strap is designed to let you carry the camcorder

from your shoulder and - when you are ready to shoot - bring the

camcorder to shooting position in one quick movement.

To Attach the Shoulder Strap

1. Unfasten one end of the shoulder

strap from the buckle. Make sure you

leave the buckle on the strap.

Buckle

.

2. Thread one end of the shoulder strap 4.

through one of the shoulder strap rings

as shown below. 5.

Shoulder Strap

Attachment Ring

Shoulder Strap

Attachment Ring

Thread the end of the strap back

through the buckle making sure it is

threaded over the outer strap. Make

sure the strap is not twisted.

Repeat steps 1-3 to attach the other

end of the strap.

Pull on the straps and make sure they

are securely fastened before using the

shoulder strap to support your

camcorder.

11

Built-In Color Enhancement Light

The built-in color enhancement light automatically adds light when

needed. To operate the video light, press and hold the small button on the

CAMERA/OFF/VCR switch while you set it to CAMERA.

CAMERA/OFF/VCR Switch

Video

Light

To Use the Light

Set the LIGHT AUTO/OFF/ON switch.

•To turn the light on, set the switch

to ON.

If you want the light to come on

automatically when the camcorder

senses there is insufficient light, set

the switch to AUTO.

Notes: For the light to operate in AUTO,

you must have a tape in the camcorder.

If the lighting condition is unstable, the

light may turn on and off. Set the light to

ON or OFF.

• To turn the light off, set the switch to

OFF. To save battery power, turn the

light off when you are not recording.

Notes: When the light is turned on, the

camcorder may turn off if the battery's power

is low even though the battery level indicator

is not flashing.

Avoid bumping or shaking the light when in

use. The light's bulb is sensitive when hot and

might burn out.

12

LIGHT AUTO/OFF/ON Switch

_ _the_ object;

vi eoii ht

ro ev i

_ _ op_at_ th_ _di

Replace Light Bulb

Light Case

Reflection

Plate Lower Hook

Remove and Replace the Light Bulb

1. Press and hold the lower hook of the

light cover while removing the light

cover from the light case.

2. Replace the light bulb.

Note: See the installation instructions

packed with the replacement bulb for

detailed instructions.

3. To replace the light cover, pass the

bulb through the hole of the

4.

reflection plate and attach the lower

hook to the light case on the camcorder.

Press gently on the front of the light

cover until it locks into place.

Note: Make sure the front cover of the

light is properly attached.

13

Use the Adapter/Charger to Power Your Camcorder

The adapter/charger attaches to the camcorder and lets you power your camcorder

directly from standard household power. The adapter/charger operates on 120 volts,

50/60 Hz, and can be used to power the camcorder or recharge the battery.

To AC 120V. DC IN 9.6V

50/60 Hz Jack

POWER

Indicator

Adapter/

Charger DC Cable

Attach Adapter/Charger

1. Attach one end of the adapter/

charger's DC cable to the DC

OUTPUT jack on the adapter/charger.

2. Attach the other end of the cable to

the DC IN 9.6V jack on the camcorder.

3. Plug the adapter/charger's plug into an

operating outlet. The POWER

indicator on the adapter/charger lights

when it is properly connected.

Notes: The adapter/charger cannot charge the

battery and operate the camcorder at the same

time. If you connect both, the adapter/charger

will power the camcorder. Remove the

14

adapter/charger's cable from the DC OUTPUT

jack to charge the battery.

When using the adapter/charger to power the

camcorder, the battery level indicator might

display _. This indicator is used for

battery operation and has no meaning when

using the adapter/charger to power the

camcorder.

Remove Adapter/Charger

1. Unplug the adapter/charger from the

wall outlet.

2. Remove the DC cable from the

adapter/charger and camcorder.

Use the Battery to Power Your Camcorder

Charge the Battery

You must charge the battery before you can use it the first time. Initial charging will

take approximately two hours. The camcorder's operating time depends on how often

you turn the power on and off and how much you use zoom and pause. Conserve

battery power by turning the camcorder off during recording breaks.

To AC 120V,

50/60 Hz Rechargeable Battery

(Hold battery flush and

slide down.)

Align

CHARGE

Indicator

Charger

Charge the Battery

If the DC cable is attached to the

DC OUTPUT jack on the adapter/charger,

remove it.

1. Align reference mark on battery with

mark on adapter/charger.

2. Hold the battery flush against the

adapter/charger and slide it in the

direction of the arrow.

3. Plug adapter/charger into nearest AC

outlet (120V, 50/60Hz).

4. If the battery is properly connected,

the adapter/charger's CHARGE

indicator lights.

Note: Your battery will provide better

service if you charge it before and after use

and store it at room temperature.

5. Remove the charged battery by sliding

it up and off the adapter/charger.

6. Attach the charged battery to the

camcorder as shown on the next page.

15

Use the Battery to Power Your Camcorder (continued)

BATTERY

EJECT

Button

CAMERA/

OFF/VCR

Switch

Rechargeable

Battery

Hold Battery

Flush and

Slide Down

Attach the Charged Battery

If the DC cable is attached to the

camcorder, remove it before attaching

the battery.

1. Align the reference arrow on the

battery to the arrow on the back of

the camcorder.

2. Hold the battery flush against the

camcorder while sliding it down in

the direction of the arrow.

3. Press and hold the small button on the

CAMERA/OFF/VCR switch while you

slide it to CAMERA.

Remove the Battery

1. Set the CAMERA/OFF/VCR switch to

OFF.

2. Press and hold the BATTERY EJECT

button while you remove the battery.

ATTENTION: LEAD ACID BATTERY MUST BE DISPOSED OF

PROPERLY. THE PRODUCT THAT YOU HAVE PURCHASED

USES A RECHARGEABLE BATTERY. AT THE END OF ITS

USEFUL LIFE, UNDER VARIOUS STATE AND LOCAL LAWS, IT

MAY BE ILLEGAL TO DISPOSE OF THIS BATTERY INTO THE

MUNICIPAL WASTE STREAM. CHECK WITH YOUR LOCAL

SOLID WASTE OFFICIALS FOR DETAILS IN YOUR AREA FOR

RECYCLING OPTIONS OR PROPER DISPOSAL. Pb

16

Use the Battery to Power Your Camcorder (continued)

Battery Level Indicator

The battery level indicator appears in the viewfinder and shows you the amount of

power in the rechargeable battery.

Battery Level Indicator Display

in Viewfinder

Note: If the battery level display does not

appear, press DISPLA Y

•When _ appears, the battery is

fully charged.

• As the power is used _ and

appear.

• When the battery power is almost

gone, _ flashes in the viewfinder.

Recharge the battery or use the adapter/

charger before continuing to use the

camcorder. Set the CAMERA/OFF/

VCR switch to OFF to turn off the

camcorder before replacing the battery.

Notes: When recording using the recharge-

able battery, the battery level indicator

flashes to warn you of low battery power

even if you do not have the battery level

indicator displayed.

The battery level indicator will not be

recorded on the tape when it appears in the

viewfinder.

The battery level indicator has no meaning

when you use the adapter/charger or optional

car cord to power the camcorder.

17

Use the Battery to Power Your Camcorder (continued)

Battery Care

•Your battery will provide better service

and longer performance if you charge

if before and after use, and store it at

normal room temperature.

• The battery should be charged at a

temperature of 32°F-95°F (0°C-35°C)

to prevent damage.

• Do not operate the battery at tempera-

tures below 14°F (-10°C) or above 95°F

(35°C). The battery might be damaged

if operated at temperatures above

122°F (50°C). Operation time will

decrease at extremely low tempera-

tures.

After repeated chargings and use the

operation time will decrease. When

the operation time becomes too short to

be useful, it is time to replace the

battery.

Battery Storage

Store the battery at normal room

temperature.

Lead acid batteries discharge if not

used. Recharge the battery at least

once ever six months or you may not

be able to recharge it.

A battery stored for a long period

might not supply power for the

specified time. Additional rechargings

might help restore the battery's

operation time.

Battery Safety Precautions

Batteries being recharged that have not

been used for an extended period may

continue to charge after the normal

time. Do not charge a battery for more

than 24 hours.

• If the CHARGE indicator on the

adapter/charger starts flashing, remove

the battery, and reattach it. If after

several attempts, the indicator contin-

ues to flash, your battery cannot take a

charge and must be replaced.

• Throwing the battery into a fire or

exposing the battery to excessive heat -

over 149°F (65°C) could be hazardous.

• Do not short the battery's terminals.

• Allow the battery to cool down before

attaching it to the adapter/charger. The

CHARGE indicator will not light and

the battery will not charge if you attach

a hot battery.

• Do not attempt to disassemble or

modify the battery. There are no user-

serviceable parts inside.

• Use the battery only with specified AC

adapter/chargers and camcorders.

• If leakage from a damaged battery

contacts your skin or clothing, wash it

off immediately with running water.

18

Use the RCA Optional Car Cord Adapter

The optional DCC096 car cord shown on

page 45 allows you to power your

camcorder from the cigarette lighter

socket of a car, truck, or RV. It converts

12-volts to a 9.6-volt output.

Note: Consult the installation and operating

instructions enclosed with the DCC096 for

complete operating instructions.

Use the DCC096 Car Cord Adapter

Cigarette

Lighter

Socket

Optional

Car Cord

(DCC096)

1.

2.

3.

4.

5.

Set the CAMERA/OFF/VCR switch to

OFF to turn off the camcorder.

If the battery or DC cable is attached

to the camcorder, remove it.

Insert the small plug on the car cord to

the DC IN 9.6V jack located on the

back of the camcorder.

Take the vehicle's cigarette lighter out

of the socket.

Insert the car cord's cigarette lighter

plug into the vehicle's cigarette lighter

socket.

.

DC IN 9.6V

Jack

Press and hold the small button on

the CAMERA/OFF/VCR switch while

you set it to CAMERA to turn on

the camcorder.

Notes: Consult the vehicle owner's manual to

see if the vehicle's ignition switch must be

turned on before the DC car cord will operate.

When using the car cord to power the

camcorder, the battery level indicator has

no meaning.

19

Make sure you select good quality tapes for your camcorder. Use of poor quality

tapes or tapes that have been damaged or mishandled can contaminate the video

heads, resulting in a snowy picture or no picture at all during playback. Because there

is no control over the type of tape purchased or rented by consumers, head cleaning is

not covered under warranty. It is considered normal maintenance.

If a snowy picture or no-picture condition persists, consider the use of a chemical

nonabrasive head-cleaning tape. Be sure to follow the directions with the head-

cleaning kit carefully. Improper use of a head cleaner might damage your camcorder.

Erase Protection - Safety Tab

You can use your videocassettes over and over again. To erase a previous recording,

just record over it.

_ _Safety Tab

To prevent accidental

erasure, break off the tab.

@

To record on the tape again, cover

the hole with vinyl tape.

Record and Playback Speed and Times

The camcorder records and plays back in VHS standard speed (SP). Listed below are

the maximum recording times for popular VHS cassettes.

T-60 60 Min.

T- 120 2 Hrs.

T-160 2 Hrs., 40 Min.

T- 180 3 Hrs.

20

Insert and Remove Cassettes

STOP/

EJECT

Button

Tab

Windows

Cassette

Holder

1. Attach a power source to the

camcorder.

2.

.

Press the STOP/EJECT button.

The cassette holder opens

automatically.

Insert the cassette with the tape wheel

facing up and tape windows facing

Press here

to close.

4.

out. Gently push the cassette down

until it locks into place.

Gently close the cassette holder with

your hand.

Cassette Care and Storage

•When you are finished with a cassette,

rewind it, remove it from the

camcorder, and label it.

• Store cassettes vertically in their

protective cases at normal room

temperatures. Do not leave your

camcorder or cassettes in a car or

outdoors for an extended period.

Excessive heat or cold might damage

your cassettes.

• Keep the cassette away from strong

magnetic fields such as electric motors

and other devices.

• Keep dust from entering the cassette

compartment. All dust is abrasive and

will cause excessive wear on the tape

and the camcorder's recording or

playback heads.

• Do not use cassettes with damaged or

spliced tape.

• Do not use a cassette if it has been

damaged or exposed to moisture. The

tape might jam and/or damage your

camcorder.

Break off the safety tab to prevent

accidental erasure of your recording.

21

Set the Time and Date

You must set the correct date and time before it can be displayed and

recorded on your tapes. The built-in clock cell must be charged as

described on the next page.

I

CAMERA/

DATE/TIME OFF/VCR

Button _Switch

oooo

REW!

REVIEW EFWD Button

ButtonI I STOP/EJECT

I I Button

1.

2.

.

Attach a power supply to the

camcorder.

Press and hold the small button on the

CAMERA/OFF/VCR switch while you

set it to CAMERA.

Press the DATE/TIME button to

display the date and time in the

viewfinder.

A flashing cursor lets you know which

part of the display you are setting.

If the flashing cursor does not appear,

press and hold DATE/TIME and then

press STOP/EJECT.

4. Repeatedly press EFWD or REW/

REVIEW until the correct month

appears. Press and hold the button to

advance the digits faster.

5. When the correct month is displayed,

press STOP/EJECT. The cursor

moves to the next part of the display.

6. Repeat steps 4 and 5 to set the correct

month, day, year, hour, minute(s), and

AM/PM_

.After setting AM or PM, press the

DATE/TIME button to remove the

flashing cursor and start the internal

clock.

22

12:OOAM

"I'/ 1/1998

/i _,

To Correct the Date or Time

To correct the date or time, press and hold

the DATE/TIME button and then press

STOP/EJECT. The display and the

flashing cursor appear. Use STOP/

EJECT, EFWD, and REW/RE VIEW to

correct the time or date. Press DATE/

TIME to remove the flashing cursor and

start the clock.

Record the Time and Date, A UTO Date, Auto TITLE, or Date

The time and date, AUTO date, auto TITLE, date only, or no date can be recorded on

your tape. Whenever one of these displays appears, it will be recorded.

To Select the Display to Record

1. Repeatedly press DATE/TIME to

select the display you want to record.

• Date and Time Display: The date

and time will be displayed and

recorded.

• @ AUTO Date: The date is

automatically recorded for approxi-

mately 10 seconds at the beginning

of the recording.

• @ TITLE: The date and title you

have created are displayed and

recorded for approximately 10

seconds at the beginning of the

recording.

• Date Display: The date is dis-

played and recorded.

• No Display: No display is dis-

played or recorded.

Charge the Built-in Clock Battery

The camcorder has a built-in rechargeable battery that must be charged

approximately every two months.

1. Attach a power supply and set the

CAMERA/OFF/VCR switch to OFF.

2. Leave the power supply attached at

least 24 hours.

23

Usethe Viewfinder

The camcorder's viewfinder is a miniature monitor that displays the picture seen by

the camcorder when recording.

Adjust Viewfinder for Convenient Viewing

For convenient viewing, rotate the viewfinder horizontally, pull it out from the

camcorder, and adjust the eyepiece.

Viewfinder in Carrying or Storing Position

Eyepiece Focus

Control

Viewfinder Eye_

Pull

Viewfinder in Operating Position

Eyepiece Focus Control

The eyepiece focus control lets you set

the focus of the viewfinder for your

vision. If you wear eyeglasses, you

probably can operate the camcorder

without them.

It is easiest to set the correct focus by

focusing on one of the viewfinder's on-

screen displays. Look through the

viewfinder and adjust the eyepiece focus

control for your vision.

The eyepiece focus control does not affect

the focus of the picture actually recorded

by the camcorder.

24

Use the Viewfinder (continued)

Tilt Adjustment

BRIGHT Control

BRIGHT Control

The brightness of the viewfinder can be

adjusted by rotating the BRIGHT control.

This does not affect the picture being

recorded by the camcorder.

25

Viewfinder Displays

AE:60

_9_ B/W

ZOOM NO TAPE

REC

0000M

r_T1

INDEX

10:30AM

11/18/1998

AE:60 (Auto Exposure) Shutter Speed

Press the DISPLAY button to display the

shutter speed selected by the camcorder.

Battery Level Indicator (_)

Press the DISPLAYbutton to display the

amount of time left on the rechargeable

battery. Details are on page 17.

Fade Indicator (B/W)

Press the FADE button to select a fade.

• Select [] to white fade.

• Select [] to wipe fade.

• Select [] to zoom fade.

• Select B/Wto black-and-white fade.

•Details are on page 32.

INDEX Indicator

Press the DISPLAY button to display this

indicator when the camcorder is placing

an index mark on the tape. Details are on

page 30.

26

Status Displays

The following displays appear to tell you

the status of the camcorder.

• The REC indicator appears during

recording.

• The •• indicator appears when the

camcorder is fast-forwarding.

• The •• indicator appears when the

camcorder is rewinding.

• The II indicator appears during

record-pause.

Steady Pix Indicator (@9})

To turn the steady pix feature on or off,

press the STEADY PIXbutton. @_}

appears when steady pix is turned on.

Derails on page 33.

Tape Counter with Memory Stop

(O000M)

Press the DISPLAY button to display the

tape counter. The tape counter helps

locate segments of tape.

• Memory stop is turned on whenever

the tape counter appears.

•Details are on page 34.

Tape Warnings (TAPE, NO TAPE, and

TAPE END)

•TAPE flashes when you try to record

with the safety tab removed.

•TAPE flashes when a damaged tape is

inserted. Remove the tape and replace

it with a new one.

•NO TAPE flashes when you try to

record with no cassette inserted.

•TAPE END flashes when there is

approximately five minutes of

recording time left on the tape.

•TAPE END briefly appears when you

reach the end of the cassette when

you're recording.

Time and Date Display

Press the DATE/TIME button to display

the time and date, AUTO date, auto

TITLE, date only, or no date when the

camcorder is in record-pause.

• These displays are recorded on the

tape when they appear in the

viewfinder.

•Details are on pages 22-23.

Tape-Remaining Indicator (_l)

Press the DISPLAYbutton to display the

tape-remaining indicator. This display

shows the approximate amount of tape

left for recording or playback. Details are

on page 30.

H

Zoom ( _) and ZOOM Indicators

u

zoom indicator ( t ) appears

The

when you use the power zoom

buttons (Tand !4/).

•ZOOM appears when you zoom with

the Tbutton more than 16 times.

Derails are on page 31.

27

DISPLAY Button RE W/RE VIE WButton

F.FWD Button

Microphone

Zoom Buttons

(T and W)

VCR Switch

DISPLAY Button

The DISPLAY button lets you remove the

battery level, steady pix, tape speed, tape

counter with memory stop, remaining

tape display, index, fade, and zoom

indicators from the viewfinder.

• Press DISPLAYto remove the

indicators.

• Press DISPLAY again to display the

indicators.

Microphone

The microphone picks up the sound

during a recording. It is more sensitive to

sounds coming from the direction the lens

is pointed.

Auto Shot TM Feature

The camcorder automatically adjusts

focus, white balance, iris, shutter speed,

and light according to the recording

conditions.

28

Camera Edit Feature

The camera edit feature allows you to

position the tape when the camcorder is

in record-pause. Press and hold the small

button on the CAMERA/OFF/VCR switch

while you slide it to CAMERA.

•PressandholdREW/REVIEWto

visually search the recorded tape

in reverse.

•Press and hold F.FWD to visually

search forward on the recorded tape.

•Press and hold PLAYto view the

recorded tape at normal speed.

When you release the button, the cam-

corder returns to record-pause at that

point on the tape.

Quick Review Feature

Press and release RE W/RE VIE W when the

camcorder is in record-pause to review

the last few seconds of a recording. The

CAMERA/OFF/VCR switch must be set to

CAMERA.

The camcorder will play back the last few

seconds of the recording, return the tape

to its previous position, and return to

record-pause.

Auto Focus

The camcorder focuses on the subject in

the center of the viewfinder. Auto focus

operates on the telephoto (7) side from

approximately 2-1/2 feet to infinity, it

operates on the wide-angle (W) side from

3/8 inch from the lens surface (macro-

focus) to infinity.

Note: When the displays appear, the AE

indicator for the shutter speed selected by the

camcorder (1/60, 1/100, 1/120, 1/180, 1/250,

1/350, 1/500, 1/750, 1/1000, 1/1500, 1/2000,

or 1/4000) appears in the viewfinder,

The following conditions may prevent

auto focus from operating properly.

•Recording a subject through a window.

•Recording a subject that has a close

foreground and a far background.

•Recording two subjects at different

distances that overlap.

•Subject that isn't in center of scene.

•Recording in low-light situations.

•Recording a scene with fast motions,

like a tennis swing.

Macro Focus

The macro-focus feature lets you focus on

objects as close as 3/8 inch from the

camcorder lens.

1. Press and hold zoom button Wuntil

the lens is completely zoomed out.

2. Position the subject in the center of

the scene.

Notes: Zooming is not possible when using

macro-focus. To change the size of the

subject, move the camcorder lens closer or

farther away from it.

For best results increase illumination when

recording with macro-focus.

29

Tape-Remaining Display

The tape-remaining display shows the

approximate amount of tape remaining for

recording or playback.

r_nm

Tape-Remaining Display

in Viewfinder

• Press DISPLAYto display the tape-

remaining indicator in the viewfinder.

• The camcorder takes approximately ten

seconds to calculate the tape remaining

when you first start playing or record-

ing a tape.

.... appears while the

camcorder calculates the amount of

tape-remaining.

Once tape-remaining has been calcu-

lated, it automatically updates and is

readily available as long as the same

tape remains in the camcorder.

• When _ appears, all or most of

the tape remains.

• _ and _ appear as the tape is

being used.

• When the tape is almost at its end,

TAPE END flashes in the viewfinder.

Electronic Indexing

Each time you begin recording (after the

camcorder has been turned off for at least

four hours), the camcorder automatically

records an index mark at the beginning of

the new recording.

When you play back the indexed tape in a

VCR that has a compatible indexing

feature called "VHS Index Search

System" the invisible marks can be

located automatically. See your VCR

Owner's Manual for index playback

instructions.

INDEX

INDEX Display

in Viewfinder

When the DISPLAY button is pressed so

the displays appear, INDEX appears

briefly to let you know the camcorder is

recording an index mark.

Note: The camcorder does not record index

marks every time you stop and start recording.

An index mark is recorded only once - at the

start of each day's recording session

(or whenever the camcorder has been turned

off for four hours).

3O

Zooming

Press one of the zoom buttons to zoom in and out for close ups or wide-

angle shots.

Zoom Buttons

(T and W)

Use the Zoom Buttons (T and W)

1. To zoom in or out from wide angle to

32 times, press zoom button Tor W.

•To move the lens in the telephoto

(close-up) direction, press T.

• To move the lens in the wide angle

direction, press W.

When DISPLAYis pressed so the displays

appear, the zoom level indicator appears

in the viewfinder during normal zooming.

ZOOM appears when you zoom more

than 16 times.

ZOOM

T

W

Zoom Level Indicator

in Viewfinder

31

Fade In and Out of Scenes

You can add a professional touch to your recordings when you fade in and out of

scenes. Both the picture and sound gradually appear or disappear. The speed of

the fade is controlled by the camcorder.

FADE Button

Fade In

1.

2.

Press REC/PAUSE to pause

recording.

Repeatedly press FADE to select the

fade you want to use. The indicator

for the fade you select will appear.

• Select [] (white) to fade in and

out to/from a white screen.

• Select [] (black wipe) to fade in

and out to/from a black screen.

• Select [] (zoom) to fade in and

out while zooming.

• SelectB/W(black-and-white)to

fade in and out to/from a black-

and-white picture.

• Select no fade indicator if you do

not want to fade in or out.

Note: The last fade used appears the first

time you press FADE.

3. Press REC/PAUSE to start recording.

The picture and sound gradually

appear in place of the blank screen.

Fade Out

1.

2.

During recording, repeatedly press

FADE to select a fade.

Note: The last fade used appears the

first time you press FADE.

Press REC/PAUSE to stop

recording. The picture and sound

gradually disappear.

32

STEADY PIX Button

Steady Pix TM Feature

The steady pix feature corrects slight

shaking of images during some record-

ing modes.

• While zooming in on a distant subject.

• When recording an approaching small

subject.

• When recording while walking or

riding in a vehicle.

• When recording through a vehicle's

window.

To Use the Steady Pix TM Feature

•Press the STEADYPIXbutton to turn

steady pix on. The steady pix indica-

tor (@}) appears in the viewfinder.

•Press the STEADYPIXbutton to turn

the steady pix feature off. The steady

pix indicator (@_})disappears.

Notes: Turn steady pix off when using a

tripod. Steady pix may not operate properly

when wide-angle or telephoto lens adapters

are used.

There is a small change in the picture size

when using steady pix.

Accurate stabilization may not be possible if

hand shake is excessive or when shooting the

following:

• Subjects with vertical or horizontal stripes.

• Dark or dim subjects.

• Subjects with excessive backlighting.

• Scenes with movement in various

directions.

• Scenes with low-contrast backgrounds.

33

Tape Counter

The tape counter acts as a handy reference to help you locate tape segments.

The memory-stop feature helps locate a certain point on the tape. When the

tape counter appears, the tape stops automatically during rewind or fast

forward when the tape counter reaches O000Mi

DISPLAY CAMERA/

OFF/VCR

Button RESET Switch

_Button I_

[ oo

REW/

RE VIEWF.FWD Button

ButtonI I STOP/EJECT

I I Button

Use the Memory-Stop Feature

1. Press REC/PAUSE to pause recording.

Make sure the displays appear in the

viewfinder. If they do not, press

DISPLAY.

2. Locate the place on the tape you want

to return to, and press RESETto reset

the counter to O000Mi

O000M

.

34

Tape Counter

With Memory Stop

Continue to record or play the tape.

When you want to return to the place

4.

you marked, press the REC/PAUSE

button to stop recording or the STOP/

EJECT button to stop playback.

Press and hold the small button while

you set the CAMERA/OFF/VCR

switch to VCR.

5. Press the REW/RE VIEW button.

The tape rewinds to the counter

reading of O000M.

Notes: Press DISPLAYto display or remove

the tape counter. Memory stop is turned on

whenever the tape counter appears.

The camcorder stops rewinding or fast

forwarding when the counter reaches O000M.

To continue rewinding or fast forwarding,

press the button again.

The tape counter automatically resets to

O000M whenever a cassette is inserted.

Titler

You can store a title in memory. The created title can be displayed and recorded

at any time. The built-in character register contains more than 45 different

characters. Your title can contain up to 32 characters on two lines.

TITLER

Button

-Button

(Also RE W/RE VIE WButton)

CAMERA/OFF/

VCR Switch

+Button

(Also F.FWD Button)

EDIT-ADV Button

(Also STOP/

EJECT Button)

000

35

Titler (continued)

To Create a Title

1. Attach a power source to the

camcorder. Press and hold the small

button on the CAMERA/OFF/VCR

switch while you slide it to CAMERA.

2. Press TITLER to display the titler

graphics in the viewfinder. A flashing

cursor appears.

3. Press EDIT-ADVto move the flashing

cursor to the place where you want to

begin your title.

4. Select the first character for your

title by pressing the + or - button

until the character you want appears

in the viewfinder.

See the chart below for the characters

available.

5. After you have selected the first

character, press EDIT-ADV to move

the flashing cursor to the place where

you want the next character to appear.

6. Repeat steps 4 and 5 until you have

completed the title.

7. When you are finished, press TITLER

to store the title and remove the title

graphics from the viewfinder.

Remember: Be sure to remove the titler

graphics from the viewfinder for normal

recording.

To Correct an Error ..... ...... ...... ...... ...... ...... ...... ......

1. Press TITLER to display the titler

graphics in the viewfinder.

2. Press EDIT-ADV to move the flashing

cursor over the character you want to

correct.

.Press the + or - button until the

correct character appears.

Note: If you want to delete a character,

press + or - until the blank space appears.

Chart of Characters in Titler's Register

A B C D E F G H I J KL M

N O P Q R ST UVWXY Z

01 23456789? ' /,

- ; : < > !(BLANK)

36

Titler (continued)

Record a Title on a Tape in the Camcorder

1. Attach a power source to the

camcorder. Press and hold the small

button on the CAMERA/OFF/VCR

switch while you slide it to CAMERA.

2. Locate the place on the tape where

you want to record the title.

Note: If you record a title on a

prerecorded tape, the audio and video is

erased where the title is inserted. A three-

to-four second pause of blank tape appears

before the existing audio and video return.

3. Press TITLER to display the titler

graphics in the viewfinder.

4. Press REC/PAUSE to start recording

the title.

5. After you have recorded the title for

the desired length of time, press

TITLER to remove the titler graphics.

The camcorder will now record

normally. If you do not want to

continue recording, press REC/

PAUSE.

Remember: Remove the titler

graphics for normal recording.

Note: You can also use the automatic title

recording feature to automatically record

the title and date for 10 seconds when you

begin recording. Press the DATE/TIME

button to display (_) TITLE before starting

to record.

Record aTitle While Copying a Tape from the Camcorder to Another VCR

1. Attach a power source to the

camcorder.

2.

.

4.

Place the tape you want to copy in the

camcorder and press and hold the

small button on the CAMERA/OFF/

VCR switch while you slide it to VCR.

Place a blank tape in the VCR, and

place the VCR in record-pause.

Start copying the tape from the

camcorder to the VCR. Details are on

pages 40-41.

5. When you see the place on the tape

you want to insert the title, press

TITLER.

6. After you have recorded the title for

the desired time, press TITLER to stop

recording the title.

7. Stop the camcorder and VCR when

you are finished copying the tape.

Important Note: Remove the titler graphics

for normal recording.

37

Viewfinder Playback and Playback Features

The simplest way to watch tapes using the camcorder is in the viewfinder. You can

use the playback features during viewfinder playback.

[

CAMERA/

OFF/VCR

000

R E C/PA US E

Button

TRA I_K/N_

Buttons

(Also Wand T

Buttons)

REW STOP/

(rewind)/ F.FWD EJECT

REVIEW Button Button

Button l /

Eyepiece

Play Back a Tape in the Viewfinder

1.

2.

Attach a power supply.

Attach the adapter/charger, charged

battery, or optional car cord.

Insert a tape.

• Press STOP/EJECTto open the

cassette compartment.

• Insert the cassette with the safety

tab facing up and the tape windows

.

facing out. Press the cassette

down gently until it locks into

place, and close the cassette

compartment door.

The camcorder only plays back

tapes recorded in the SP speed.

Press and hold the small button on

the CAMERA/OFF/VCR switch

while you slide it to VCR.

38

PlayBackaTapein theViewfinder(continued)

4. Adjust the viewfinder.

•Grasp the viewfinder and rotate

it horizontally. Pull the

viewfinder out from the

camcorder and rotate the

eyepiece into a comfortable

viewing position.

.

• Turn the eyepiece focus control to

adjust the focus of the viewfinder for

your vision.

• Rotate the BRIGHT control to adjust

the brightness.

Press PLAY to begin playback.

• If necessary, adjust tracking.

• During playback, use the playback

features below.

6. Press STOP/EJECT when you are

finished.

Playback Features

Tape Positioning

Press and hold the small button on the

CAMERA/OFF/VCR switch while you

slide it to VCR.

•Press and quickly release REW/

RE VIE W or EFWD to rewind or

fast-forward the tape.

• Press STOP/EJECTto stop

the tape.

Stop-Action Pause

• During playback, press REC/PAUSE

to "stop the action" and view one

frame of the tape.

• Press REC/PAUSE again to return to

normal playback.

Visual Searching

• During playback, press and hold

EFWD or RE W/RE VIE W if you

want to search the tape visually in

forward or reverse.

• Release the button to return to

normal playback.

Tracking

During playback, streaks might appear in

the playback picture. Press either

TRACKING button to move the streaks

up or down and out of the picture.

• During stop-action playback, pressing

one tracking button might reduce

picture "jitter" (picture bouncing up

and down). Some "jitter" is normal.

Remove the tape to reset the tracking to

its preset center.

Note: The tracking buttons only affect tape

playback. They have no effect during

recording.

39

Playback on TV (or VCR) with Audio/Video Inputs

To connect your camcorder to a TV monitor (or VCR) with audio and video inputs, you

need an optional audio/video cable, such as VH83 shown on page 47. If your TV is

already connected to a VCR, attach the camcorder to the VCR and watch what the

camcorder is recording or playing on the TV.

AUDIO

IN

"R@

v,? o8

Back of

Stereo

VCR or

TV Monitor

Installation

1. Attach the white plug on one end of

the audio/video cable to the AUDIO

IN jack on the TV (or VCR).

Notes: If your cable does not have white

and yellow plugs, attach the same color to

the audio jacks.

If your TV (or VCR) has stereo AUDIO IN

jacks, attach the plug to the one labeled

MONO. If one is not labeled MONO, you

need aY-adapter, such as AH25, shown on

page 47 to hear both channels.

Yellow Video Plug

2. Attach the yellow plug to the VIDEO

IN jack on the TV (or VCR).

3. Attach the white plug on the other

end of the audio/video cable to the

AUDIO jack (located under the small

cover) on the side of the camcorder.

4. Attach the yellow plug to the yellow

VIDEO jack on the camcorder.

4O

Playback Operation and How to Copy Tapes on the VCR

1. A. Camcorder connected directly to 3. Press PLAY.

2.

TV: Turn on the TV and tune it to

the video input channel.

B. Camcorder connected to VCR that 4.

is already connected to TV: Turn

on VCR and place it in the "line"

or "camera mode". (If your VCR

does not have a "line" or "camera

mode", consult the VCR owner's

manual.) Operate the TV as you

normally do to see the signal

coming from the VCR. 5.

Press and hold the small button on the

CAMERA/OFF/VCR switch while you

slide it to VCR.

•During playback, use the playback

features on page 39.

To copy what the camcorder is

playing, place a blank cassette in

the VCR, and press the VCR's

RECORD button.

Note: Make sure the memory-stop feature

is turned off _ress DISPLAY) or the

camcorder will enter play-pause when the

counter reaches O000M.

Press STOP/EJECT when you are

finished.

Note: The camcorder only plays back

tapes recorded in the SP speed.

Viewing What the Camcorder is Seeing (or Recording)

1. A.

g.

Camcorder connected directly to

TV: Turn on the TV, and tune it to

the video input channel.

Camcorder connected to VCR that

is already connected to TV: Turn

on VCR and place it in the "line"

or "camera mode". (If your VCR

does not have a "line" or "camera

mode", consult the VCR owner's

manual.) Operate the TV as you

normally do to see the signal

coming from the VCR.

2. Press and hold the small button on the

CAMERA/OFF/VCR switch while

you slide it to CAMERA.

Note: Turn the TV's volume down to

prevent a high-pitched squeal caused

by feedback.

3. Press the REC/PAUSE button to begin

recording. You can watch what the

camcorder is seeing (or recording) on

the TV screen.

41

Playback on a TV Without Audio/Video Inputs

To connect your camcorder to a TV without audio/video inputs, you need an

optional CRF95 RF output adapter and an optional coaxial RF cable, such as VH82

or VH90 shown on page 4 7. If your TV has audio and video inputs (or is

connected to a VCR), refer to pages 40-41.

Antenna

I I ',

OR OR '_

I I _

Antenna \\\

Optional 300/75 ohm

Transformer

Back of TV

I xxx

OR ",,

\\\\\\\\Channel Selector

\

", IN \

....... FRoM

! :A /O-tional75300Ohm_a** ANT'-"_/OptionalRFOutputAdapter

ITransformer '__. f(such as CRF95)

(such asVH54 /-- /

Optional Coaxial RF Cable OUT

(such as VH82 or VH90) TO TV

Installation

1. Disconnect the VHF antenna from

your TV. Connect the antenna to the

IN FROMANT connector on the RF

output adapter if you are going to

leave the adapter connected to the TV.

Note: If your VHF antenna is the flat

twin-lead type attached by two screws,

you need an optional 300/75 ohm

transformer.

2. Attach one end of the optional coaxial

RF cable to the OUT TO TV

connector on the adapter, and attach

the other end to the VHF input on

your TV as shown.

Note: If your TV has 300 ohm screw

terminals, you need a 75/300 ohm

transformer, such as VH54, shown on

page 47.

3. Attach the RF output adapter's yellow

plug to the VIDEO jack, the small

plug to the RFDC OUT jack, and the

white plug to the AUDIO jack located

under the small cover on the side of

the camcorder.

42

Playback Operation

1. Set the CH3/CH4 switch on the

RF output adapter to CH3 or CH4.

2. Turn on the TV, and tune it to the

same channel you selected with the

RF output adapter's CH3/CH4 switch.

3. Press and hold the small button on the

CAMERA/OFF/VCR switch while you

slide it to VCR.

4. Press PLAYon the camcorder.

•During playback, use the playback

features described on page 39.

5. Press STOP/EJECT on the camcorder

when you are finished.

Viewing What the Camcorder Is Recording

1. Turn on the TV and tune it to channel

3 or 4. Turn the TV's volume down to

prevent a high-pitched squeal caused

by feedback.

2. Set the CH3/CH4 switch on the RF

output adapter to the same channel

you selected on the TV.

3. Press and hold the small button on the

CAMERA/OFF/VCR switch while you

slide it to CAMERA.

4. Press the REC/PAUSE button to begin

recording. You can watch what the

camcorder is seeing (or recording)

on the TV screen.

Normal TV Viewing

For normal TV viewing, leave the RF the camcorder or turn the camcorder's

output adapter hooked up to the TV. power off.

Disconnect the adapter's plug from

Note to Cable TV Installer

This reminder is provided to call your attention to Article 820-40 of the

National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that

provides guidelines for proper grounding and, in particular, specifies that the

cable ground shall be connected to the grounding system of the building as

close to the point of cable entry as practical.

43

Travel Tips

Write down your camcorder's serial

number and keep it separate from the

camcorder when traveling. If your

camcorder is lost or stolen, you will be

able to identify it.

Use extra care when you use your

camcorder or accessories at a beach or

pool. Spray, sand, and dust should be

avoided. If your lens has been exposed

to the elements, clean it only with

proper lens cleaning supplies.

Make sure you have any adapters that

you might need before taking your

camcorder to other countries. Consult

your dealer for advice.

Carry your camcorder in a carrying

case when traveling. See the next page

for a carrying case designed for your

camcorder. An ordinary suitcase or

carry bag does not offer the protection

your camcorder needs. Treat your

camcorder as carry-on luggage to

protect it from rough handling.

Recording Tips

•Try to make sure indoor scenes are • Fading in and out of scenes makes

welMit. This improves picture quality your videos appear more professional.

and color reproduction.

Do not move the camcorder rapidly

from side-to-side while recording.

A steady, gradual "pan" avoids blur-

ring and "jitter."

Use the viewfinder to make sure the

camcorder is level while recording so

that your scenes won't appear "tilted."

Do not bump or tap the camcorder's

microphone while recording so that

your scenes won't appear tilted.

Include close-ups of individuals when

taping family outings or group func-

tions.

Be aware of video and audio back-

grounds. Background details barely

noticed while you are taping may show

up as visual "clutter" on your record-

ing. Background noises (especially

TV sets, radios, household appliances,

traffic sounds, etc.) can detract from

the sound you want to record.

Avoid long "still" shots of landmarks

and scenic attractions. Recordings are

more interesting if they include people

and details. "Local color" will give

travel videos lasting appeal. Consider

recording a familiar or landmark scene

from an unfamiliar vantage point.

44

We invite you to take a look at some great ideas for sparking creativity and adding to

the fun of using your VHS camcorder. The following pages have a selection of

accessories to help make your memorable moments look and sound even better.

These accessories are designed to make the process of recording and watching your

videos more enjoyable.

To order accessories, contact your local Dealer.

If a dealer is not nearby, all accessories are available through toll-free ordering or by

using the order form on page 49.

AC202 Soft Carrying Case DCC096 DC Car Cord Adapter

This case provides protection and utility

for full size camcorders and most

accessories. It is constructed of rugged

nylon fabric for years of reliable service.

Three outside pockets provide ample

accessory storage with mesh-covered lens

filter compartment and built-in holders for

memo pads, pens, and other accessories.

The hand grip and adjustable shoulder

strap allow for convenient, comfortable

transportation of the camcorder.

This car cord adapter enables you to

operate your camcorder from your car,

truck, or RV by plugging the car cord

directly into the vehicle's cigarette lighter

socket. The DCC096 is designed

specifically to convert power from a

12-volt battery to a 9.6-volt output.

45

EP096FS and EP096FL Rechargeable

Batteries

These rechargeable lead-acid batteries

are designed specifically for long life.

The EP096FS is a 1-hour battery. The

EP096FL powers your camcorder twice

as long as the EP096FS (depending on

how much you turn the camcorder on

and off and use zoom and pause). Both

can be recharged with the AC adapter/

charger that came with your camcorder.

Using the Optional AC093 Tripod

Mounting the camcorder on a tripod, such

as AC093, keeps the camcorder steady

and produces excellent video results.

This tripod's fluid-effect head provides

smooth camera pan and tilt. The quick-

release mount makes it easy to attach or

remove the camcorder. The grooved,

tubular 3-section leg design folds down to

24" when not in use. Rubber feet allow

for sure footing and built-in retractable

leg spikes eliminate the need for

removing the feet.

CPS014 AC Battery Charger

The CPS014 battery charger plugs

directly into an AC outlet and charges the

EP096FS and EP096FL camcorder

batteries. Because the CPS014 operates

on 100-240 Volts, 50/60 Hz, you can use

it virtually anywhere in the world.

Aplug adaptermight be required in

some countries.

46

CRF95 RF Output Adapter VH54 Cable Transformer

This RF output adapter is used with a

coaxial RF cable, such as VH82 or VH90,

to connect your camcorder to a standard

TV (one without audio/video inputs) for

playback. If your antenna cable is the flat

twin-lead type attached by two screws,

you need a 300-to-75 ohm transformer.

If your TV has 300 ohm antenna screw

terminals, you need an optional 75-to-300

ohm transformer such as VH54.

Coaxial RF Cables

VH82 (6-ft)

VH90 (12-ft)

This 75-to-300 ohm transformer is used to

connect a standard 75-ohm antenna cable

(such as VH82 or VH90) to the 300 ohm

screw terminals on a TV.

VH83 Audio/Video Cable

This six foot audio/video cable can be

used to connect the camcorder to a TV

monitor or VCR for tape playback or

copying tapes.

These RF cables are used with the RF

output adapter to connect your camcorder

to a standard TV (one without audio/video

input jacks) for playback. If your TV has

300 ohm antenna screw terminals, you

need an optional 75-to-300 ohm

transformer, such as VH54. If your

antenna cable is the flat twin-lead type

attached by two screws, you need an

optional 300-to-75 ohm transformer.

AH25 Y-Adapter

This Y-adapter allows you to connect your

camcorder's mono audio cable to a stereo

TV or VCR.

47

Remove the Lens Hood

The lens hood can be removed so you can attach optional accessories,

such as wide-angle lens, lens extenders, or lens filter kits.

To Attach an Accessory Lens

1. Attach the lens cap over the lens hood.

2. Turn the lens cap and hood

counterclockwise with the palm of

your hand to remove them.

3. Turn the accessory lens clockwise into

the camcorder's lens. Make sure the

lens is tightened firmly, but do not

over tighten.

@

48

OrderForm for Camcorder Model CC4271

Description

Deluxe Tripod

Soft Camcorder Case

Y-Adapter

AC Adapter/Charger (100-240V)

RF Output Adapter

Car Cord Adapter

Rechargeable Battery (Extended)

Rechargeable Battery (Standard)

75-300 Cable Transformer

Coaxial RF-Cable

Audio/Video Cable

Coaxial RF-Cable

Replacement Bulb (4 watt) for

Built-in Light

Shoulder Strap

AC Adapter/Charger (Supplied) and

DC Cable

Part No. Price

AC093 $ 59.95

AC202 $ 49.95

AH25 $ 2.95

CPS014 $219.95

CRF95 $ 69.95

DCC096 $ 49.95

EP096FL $ 79.95

EP096FS $ 69.95

VH54 $ 2.95

VH82 $ 6.95

VH83 $ 5.95

VH90 $ 7.95

Qty.

221111 $ 12.95

227327 or $ 12.95

241305 $ 12.95

241044 $169.95

241308 $ 13.65

Total Merchandise ........................................................................................... $

Sales Tax .......................................................................................................... $

We are required by law to collect the appropriate

sales tax for each individual state, county, and

locality to which the merchandise is being sent.

Shipping and Handling .................................................................................... $.__

Total Amount Enclosed ................................................................................. $

Use VISA, MasterCard, or Discover.

Money order or check must be in U.S.

currency only. No COD or cash.

Prices are subject to change without notice.

Total

5.00

49

Charge your order on your VISA,MasterCard,

or Discover Card by filling in below

USE YOUR CREDIT CARD

IMPORTANT: Copy complete account number from your VISA card I_]

IIII IV-1-V-]V-V-I-]V-V-I-] Expiration date: [""_ [""_

IMPORTANT: Copy complete account number from your MasterCard

IIIIIIIIIIIIIIIIIIII

Copy Number above your name on MasterCard IIIIIExpiration date: _

IMPORTANT: Copy complete account number from your Discover Card

IIIIIIIIIIIIIIIIIIII

Expiration date: [""_ [""_

AUTHORIZED SIGNATURE

Pricesare subject to changewithout notice.

Print or type your name and

address clearly.

Name:

Street:

City:

State:

A complete and correct order will

save you days of waiting.

Apt:

Zip:

Please make sure that both sides of this form have been filled out completely.

• Allow 4 weeks for delivery.

•All accessories are subject to availability.

<D

:=

50

To order accessories,contactyour local Dealer.

If a dealer is not nearby, you can also follow the directions below to order by

telephone or direct-by-mail.

United States and Canada Orders

To place your order by phone, have your Visa, MasterCard, or Discover card ready

and call the toll-free number listed below between 8 AM and 10 PM (EST)

Monday through Friday or between 9AM and 5PM (EST) Saturday.

Use this number only to place an order for accessory items listed on

this order form.

1-800-338-0376

To place your order by mail, detach and mail the completed order form with credit

card information, money order, or check in U.S. currency (made payable to

Thomson Consumer Electronics, Inc.) to the following address:

Video Accessories

PO Box 8419

Ronks, PA 17573

51

If you're having trouble with your camcorder, you probably can correct the problem

yourself. Before you take your camcorder to an Authorized RCA Camcorder Service

Center or call a service person, use the chart below. Find the problem and try the

adjustment(s) that is listed to the right.

If service should be necessary, read your warranty to find out what is covered and how

to get service.

No power •

Won't record or

play back

No picture

Camcorder turns

off

Set the CAMERA/OFF/VCR switch to CAMERA or

VCR to turn on the camcorder.

If using battery, it may need to be recharged.

If using AC adapter/charger, make sure it is plugged

into a working outlet.

• If using AC adapter/charger, make sure it is plugged

into a working outlet.

• Make sure CAMERA/OFF/VCR switch is set to correct

position for desired operation.

• There might not be a cassette in the camcorder.

• Try ejecting and reinserting the cassette.

• The cassette tape might be broken, try another cassette.

• You might have reached the end of the cassette, try

rewinding it.

• Moisture condensation might cause the tape to stick to

the headwheel and damage the headwheel or tape. Give

the camcorder 2 or 3 hours to reach a stable temperature

before reinserting a cassette.

Won't play back • CAMERA/OFF/VCR switch must be set to VCR.

Won't record • Safety tab removed. Seepage 20.

•CAMERA/OFF/VCR switch must be set to CAMERA.

• Remove lens cap.

Set the CAMERA/OFF/VCR switch to OFF and then to

CAMERA or VCR to turn back on. Ifcamcorder is left

in record-pause or play-pause for several minutes, it

turns off to prevent tape wear.

52

Soundistoolowor

distorted

Tapestopsduring

rewindorfastforward

orwillnotoperate

duringrewindorfast

forward

Camcorderremainsin

play-pausemode

Poorauto-focus

operation

Viewfinderdisplays

areoutoffocus,too

darkortoobright

Picturequalityispoor

duringplayback

Dateand/ortimeor

titlearerecordedon

tape

• Subjectwastoofarfromcamcorder.

• Wheneverthetapecounterappears,thecamcorderwill

stoprewinding(orfastforwarding)whencounterreads

O000Mi Press REW/RE VIEW or EFWD again to

continue rewinding or fast forwarding, or press

DISPLAYto remove the tape counter.

• Make sure titler graphics do not appear in viewfinder.

Press TITLER button to remove.

• Press REC/PAUSE to return to normal playback.

• Lens is smudged and image appears unfocused.

• Eyepiece focus control is misadjusted.

• Eyepiece focus control is misadjusted. Seepage 24.

• Adjust the BRIGHT control on the bottom of the

viewfinder. Seepage 25.

• Tape was recorded on a different camcorder or VCR.

If the picture contains black-and-white streaks, press

one of the tracking buttons to correct it. See page 39.

• Camcorder only has one speed (SP). If the tape was

recorded at a different speed, it cannot be played back

on this camcorder.

• Displays are recorded on tape whenever they appear in

the viewfinder. Remove them from the viewfinder

when recording. See pages 22-23.

• When @ DATE or TITLE is selected, the display is

automatically recorded when you begin recording or

change the cassette. See pages 22-23.

• Title is recorded whenever it appears in the viewfinder.

Press the TITLER button to remove the title from the

viewfinder. See page 3 7.

53

Dateand/ortimeare

incorrect

Camcorder does not

turn on and/or

function buttons will

not operate

Bright, crystal-shaped

spots appear in

viewfinder

Colored bright spots

appear in viewfinder

Rechargeable battery

runs down sooner

than expected

• Date or time may need to be set. See page 22.

• Clock lithium cell battery may need recharging.

See page 23.

Remove the power source.

After one minute press the

reset switch gently using a Switch

nonmetallic pointed item,

such as a toothpick, until

you feel a click. This resets

the camcorder to the factory

settings and erases the date,

time, and custom settings. Wait for at least one minute

after resetting the camcorder to attach a power supply.

• Sunlight is directly entering the lens.

Black spots or bright spots of light (red, green, or blue)

might appear in the viewfinder. These spots are not

recorded on the tape and are not due to a defect in

the unit.

Lead-acid batteries must be kept charged. Charge your

battery before and after every use and at least every

six months.

Battery run times are measured when the camcorder is

recording continuously. To check your battery; charge it

completely, aim the camcorder at a clock, and record the

clock. When the camcorder stops recording, play the last

part of the tape and check the time on the clock. A one-

hour battery should give you about 60 minutes of

recording time. In practical use, a fully charged battery

might not record for 60 minutes because the battery uses

power when you pause the recording and uses extra

power when you zoom.

54

Thisequipmenthasbeentestedandfoundto

complywiththelimitsforaClassBdigital

devicepursuanttoPart15oftheFCCRules.

Theselimitsaredesignedtoprovide

reasonableprotectionagainstharmful

interferenceinaresidentialinstallation.This

equipmentgenerates,uses,andcanradiate

radiofrequencyenergyand,ifnotinstalled

andusedinaccordancewiththeinstructions,

maycauseharmfulinterferencetoradio

communications.However,thereisno

guaranteethatinterferencewillnotoccurina

particularinstallation.Ifthisequipmentdoes

causeharmfulinterferencetoradioor

televisionreception,whichcanbedetermined

byturningtheequipmentoffandon,theuser

isencouragedtotrytocorrecttheinterference

byoneormoreofthefollowingmeasures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweenthe

equipmentandreceiver.

• Connecttheequipmentintoanoutletona

circuitdifferentfromthattowhichthe

receiverisconnected.

• Consultthedealeroranexperiencedradio/

TVtechnicianforhelp.

Alterationsormodificationscarriedout

withoutappropriateauthorizationmay

invalidatetheuser'sFCCrighttooperatethe

equipment.

55

Clean the Camcorder

To clean the camcorder's exterior, remove

any power source connected to the

camcorder and gently wipe it with a clean

soft cloth.

Clean the Camcorder's Lens

To clean the camcorder's lens, blow it with ablower brush, and then gently wipe the

lens with cleaning tissue and commercially prepared cleaning solution designed for

use on camera lens. Improper cleaning might scratch the lens.

Lens

Clean the Camcorder's Viewfinder

You can remove the viewfinder eyepiece for cleaning.

1. Turn the eyepiece counterclockwise and

pull it out.

2. Gently use a cotton swab or blower

brush to remove the dust.

3. Reattach the eyepiece by aligning

the reference marks and turning the

eyepiece clockwise until it clicks

into place.

56

Proper Care and Storage

Keep dust and grit from entering the

camcorder's cassette door. Dust and

grit are abrasive and cause excessive

wear to both the camcorder's

recording/playback heads and

cassettes.

•Always place the lens cap back on the

camcorder when it is not in use.

Before handling your camcorder, make

sure your hands and face are free from

any chemical products such as suntan

lotion, as it might damage the finish.

• The camcorder might be damaged by

improper storage or handling. Do not

subject the camcorder to swinging,

shaking, or dropping.

• Do not store the camcorder in

temperatures below -22°F (-30°C) or

above 149°F (65°C).

• When the camcorder is not in use,

always remove the cassette and AC

adapter/charger or battery.

• Retain the original carton for future

storage or shipping purposes.

Things to Avoid

• Do not attempt to disassemble your •

camcorder. There are no user-

serviceable parts inside.

• Avoid operating your camcorder

immediately after moving it from a •

cold location to a warm location. Give

the camcorder 2 to 3 hours to reach a

stable temperature before inserting a

cassette. When the camcorder is

moved from cold to warm,

condensation might cause the tape to

stick to the headwheel and damage the

headwheel or tape.

• Do not aim your camcorder at the sun

or other bright objects. •

• Do not leave your camcorder in direct

sunlight for extended periods of time.

The resulting heat buildup might

permanently damage the camcorder's

internal parts.

• Do not operate the camcorder in

extremely humid environments.

Do not operate the camcorder near the

ocean as salt water or salt water sway

might damage the internal parts of the

camcorder.

Do not operate the camcorder for

extended periods in temperatures

below 40°F (4°C) or above 95°F

(35°C).

Do not expose the camcorder or

adapter/charger to rain or moisture.

If any component becomes wet, turn

off the power and take the unit to an

Authorized RCA Camcorder

Service Center.

Do not use an adapter/charger or

batteries other than the ones specified

for the camcorder. Use of the wrong

accessories might cause damage to the

camcorder.

57

General

Power requirement: 9.6VDC

Power consumption:

Viewfinder on: 7.5 watts

Weight: 4.4 lbs. (2kg)

Dimensions - Including Viewfinder:

4-1/4" (W) x 8-3/8" (H) x 13-1/8" (D)

108 (W) x 213 (H) x 334 (D) mm

Video Recorder Section

Format: VHS

Record/playback system:

Two video record/playback heads

Video signal: EIA standard

NTSC color

Camera Section

Scanning: 525 lines/60 fields/

30 frames

Image Sensor: 1/4" CCD Imager

Lens: F1.4

16:1 (4-64 mm) power zoom lens

Diameter: 46 mm

AC Adapter/Charger

Power requirement: 120 V,

50/60 Hz.

Power consumption: 24 watts

Weight: .85 lbs. (390g)

Dimensions:

6"(W) x 1.7"(H) x 2.7"(D)

152 (W) x 43 (H) x 69 (D) mm

Viewfinder

0.55" color viewfinder Tripod Mount

One 1/4" x 10 threaded hole

58

You can reach Thomson at the

following number:

800-283-6503

(Toll free inside U.S.A.)

Our toll-free Camcorder number

operates from 8 a.m. to 5 p.m., CST

Monday - Friday

for U.S. customers only

Thomson provides a toll-free telephone

number to help you with any problems you

may encounter with your camcorder. Many

can be diagnosed over the phone, and if

necessary, repair or replacement will be

arranged. Please have your camcorder model/

serial number and date of purchase ready

when you call. If your unit is out of warranty,

we will quote the cost of a repair or

replacement unit to you.

Returning equipment to Thomson for

If we are unable to resolve your problem over

the phone, we will gladly service your unit or

exchange it for a new or, at our option,

refurbished camcorder. Refer to the limited

warranty on the next page to learn about your

specific rights and responsibilities.

repair or exchange

Always consult Thomson and get a Return

Authorization number before returning

anything! Obtain a Return Authorization

(RA) number from the telephone

representative before returning your

equipment to avoid delays, accounting errors,

or even loss of your unit.

Important information to customers who ship defective equipment to

Thomson Consumer Electronics

The Thomson representative who authorized

the return of your equipment will give you an

RA number over the phone. They will also

provide you with instructions on where and

how to return your Camcorder. Write the

number in large, clear characters on the

outside of the box. To avoid confusion and

misunderstandings, shipments without an RA

number clearly visible on the outside of the

box will be returned to you at your expense.

Include a brief note describing the problem

and any conversations about the problem you

have had with Thomson personnel.

Include your name, address and model/serial

number of your Camcorder. These numbers

are located on the bottom of your unit.

If your Camcorder is within the warranty

period, please provide a copy of the bill of sale

to verify purchase date. Use the original box

and packing material to protect the equipment

from damage in shipment.

For your protection, insure all shipments'for

full replacement value and use a reliable

shippe_ Thomson assumes no responsibility

for warranty shipments from the customer to

the factory if not shipped in the manner

prescribed by Thomson.

59

What your warranty covers:

• Any defect in materials or workmanship.

For how long after your purchase:

• 90 days for labor charges.

• One year for parts.

The warranty period for rental units begins

with the first rental or 45 days from date of

shipment to the rental firm, whichever

comes first.

What we will do:

During the initial 90 days

• Exchange your camcorder with a new or

refurbished unit, or repair your camcorder.

The option will be ours. There will be no

cost to you.

After the 90 days and within one year

Exchange your camcorder with a new or

refurbished unit, or repair your camcorder.

The option will be ours. Parts will be

provided at no charge, but you will be

responsible for the cost of labor required

for the repair.

How you get service:

Call 1-800-283-6503 and have your unit's

date of purchase and model/serial number

ready. The model/serial number

information is on the bottom of your

camcorder.

• A representative will troubleshoot your

problem over the phone. If the

representative determines that you should

receive a replacement unit, you will be

provided with a Return Authorization (RA)

number and the location of a nearby

exchange point if one exists. No returns

will be accepted without the RA number.

To receive a replacement Camcorder

before you return yours:

If you are located near an exchange point:

1. We will send a replacement unit to the

exchange point next business day delivery

in the continental U.S.A.

60

2. The exchange location will notify you of its

arrival.

3. Take your unit, excluding all accessories,

and your evidence of purchase date, such as

a bill of sale, to the exchange location and

you will be provided the new or refurbished

unit.

4. If the repairs were covered by your

warranty, you will not be billed.

If you are not located near an exchange

point:

1. Provide your Discover, MasterCard, or Visa

account number and expiration date to our

phone representative. This is for security

purposes. If we receive your unit,

excluding all accessories, within 14 days

from the date you were provided the RA

number, only items not covered by

warranty will be charged to your account.

IF YOUR UNIT IS NOT RECEIVED

WITHIN 14 DAYS, THE SUGGESTED

RETAIL VALUE OF THE CAMCOR-

DER WILL BE CHARGED TO YOUR

CREDIT CARD. This amount will be

credited if the unit is subsequently

received.

2. We will send you a replacement unit next

business day delivery in the continental

U.S.A.

3. You will receive an invoice packed with the

replacement product, but will not be

charged for the unit portion of the invoice

amount if we receive your unit within 14

days from the date you were provided the

RA number. Any labor and parts charges

not covered by our warranty will be

included and charged against your account.

4. Ship the unit back to us, excluding all

accessories, using the replacement unit's

carton. Shipping instructions will be

included in the carton along with your RA

number which will allow you to easily ship

the unit back to us. Make sure you insure

your shipment in case of damage or loss.

Include with the shipment:

• Evidenceofpurchasedate,suchasa

billofsale,toverifyyourunit's

warrantyeligibility.

• Abriefnotedescribingyour

camcorder'sproblem.

• Yourname,addressandphonenumber.

Returntransportation,storage,handling,and

insurancecostsareyoursoleresponsibility.

Weacceptnoliabilityincaseofdamageorloss.

To receive a replacement unit after we have

received your unit:

1. Write the RA number on the outside of

the carton used to return the unit.

Make sure you insure your shipment in

case of damage or loss.

2. Carefully pack the unit, excluding all

accessories, using the original box and

packing material if possible.

3. Include with the shipment:

• Evidence of purchase date, such as a

bill of sale, to verify your unit's

warranty eligibility.

• A brief note describing your camcorder

problem.

• Your name, address and phone number.

Return transportation, storage, handling, and

insurance costs are your responsibility. We

accept no liability in case of damage or loss.

4. The representative will advise the address

to mail a cashier's check or money order

for payment if there are any out of

warranty labor or parts charges and you

elect not to use your credit card.

5. Upon receipt of your product, a new or

refurbished unit will be shipped to you

next business day delivery in the

continental U.S.A.

To have your Camcorder repaired by an

Authorized RCA Camcorder Service

Center:

• Check with your dealer or call 1-800-336-

1900 for the Authorized RCA Camcorder

Service Center nearest you.

• Take your unit to the Authorized RCA

Camcorder Service Center of your choice.

• Show the Authorized RCA Camcorder

Service Center representative evidence of

purchase date, such as a bill of sale.

• Pick up your camcorder when repairs are

complete.

What your warranty does not cover:

• Adjustment of customer controls.

• Damage from misuse or neglect.

• A unit that has been modified or

incorporated into other products or is used

for institutional or other commercial

purposes.

• Batteries for remote control and clock.

• Cleaning of video/audio heads.

• Camcorders purchased or serviced outside

the U.S.A.

• Return transportation, storage and handling

costs of your unit, including insurance for

loss or damage.

• Acts of God, such as but not limited to

lightning damage.

Product Registration:

•Please complete and mail the Product

Registration Card packed with your

camcorder. It will make it easier to contact

you should it ever be necessary. The return

of the card is not required for warranty

coverage.

How State Law relates to warranty:

• This warranty gives you specific legal

rights and you also may have other rights

that vary from state to state.

If you purchased your camcorder outside

the United States:

• This warranty does not apply. Contact your

dealer for warranty information.

61

+ and-buttons 9, 35, 36

A

Accessories

included 3

optional 45

order form 49

Adapter/charger

accessory 3

charging battery 15

using 4, 14

AE focus indicators 26, 29

Assistance 1, 3

Assistance, customer 59

Attach accessory lens 48

AUDIO and VIDEO jacks 9, 40, 42

Auto focus 29

Auto Shoff Mfeature 28

B

Battery

accessory 3

attaching and removing 16

care 18

charging 15

safety precautions 18

storage 18

using 15

BATTERY EJECT button 10, 16

Battery level indicator 17, 26, 27

BRIGHT control 6, 10, 25, 38, 39

C

Cable TV installer note 43

Camcorder

cleaning 56

turn on 5

Camcorder's operating controls 9

Camera edit feature 29

62

CAMERA/OFFFVCR switch

5, 8, 9, 12, 16, 17, 19, 22, 23, 28,

29, 34, 35, 36, 37, 38, 39, 41, 43

Car cord adapter, optional 19

Care and maintenance

cleaning the camcorder 56

cleaning the lens 56

cleaning the viewfinder 56

proper care and storage 57

things to avoid 57

Care and storage

camcorder 57

cassette 21

Cassette care and storage 21

Cassette compartment 38

Cassette door 10

Cassette holder 21

Cassettes

insert and remove 21

video 20

Cautions i

Charging clock battery 23

Chart of characters in titler 36

Checks, trouble 52

Cleaning the camcorder 56

Cleaning the camcorder's lens 56

Cleaning the viewfinder 56

Clock battery

charging 23

Color enhancement light 7, 9, 12

Contents 1

Copy tapes 41

Customer assistance and service 59

D

DATE/TIME button 9, 22, 23, 27, 37

DCcable 3, 14, 15, 16, 19

DC IN 9.6V jack 10, 14, 19

Design specifications 58

DISPLAY button

9, 17, 26, 27, 28, 30, 31, 34, 41

Displays, viewfinder 26

E

EDIT-ADVbutton 9, 35, 36

Electronic indexing 30

Erase protection 20

Eyepiece 38

Eyepiece focus control 6, 10, 24, 39

F

F.FWD (fast forward) button

9, 22, 28, 29, 34, 35, 38, 39

FADE button 9, 32

Fade feature 32

Fade indicator 26, 32

Fast-forwarding indicator 26

First time operation 3

Focus

auto 29

macro 29

H

Handstrap 4, 10

Head cleaning 20

Important safety information i

INDEX indicator 26, 30

Indicators

AE focus 26, 29

battery level 17, 26

fade 26, 32

fast-forwarding 26

INDEX 26, 30

NO TAPE 27

pause 26

REC 7, 26

record-pause 7

rewind 26

status 26

steady pix 26, 33

TAPE 27

tape counter 27, 34

TAPE END 27, 30

tape remaining 27, 30

ZOOM 27, 31

zoom level 27, 31

Information to user 55

Insert and remove cassettes 21

L

Lens 9

Lens cap 4, 48

Lens hood 9

removing 48

LIGHT AUTO/OFF/ON switch 7, 9, 12

Light bulb, replace 13

Light, color enhancement 12

Limited warranty 60

M

Macro focus 29

Memory-stop feature 27, 34

Microphone 9, 28

N

NO TAPE indicator 27

O

Operating controls 9

Optional accessories 45

Order form, accessories 49

63

PRF DC OUT jack 9, 42

RF output adapter, optional 42

PLAY button 8, 9, 28, 29, 39, 41, 43

Playback features

stop-action pause 39

tape counter 34

tape positioning 39

tracking 39

visual searching 39

Playback, first 8

Playback on a TV without audio/video

inputs 42

Playback on TV (or VCR) with audio/video

in jacks 40

Playback speed 20

Powering your camcorder

using adapter/charger 14

using battery 15

using optional car cord adapter 19

Problem solving 52

Product registration i

O

Quick review feature 29

R

REC indicator 7, 26

REC/PAUSE button

7, 8, 10, 32, 34, 37, 38, 39, 41, 43

Record-pause indicator 7

Recording speed 20

Recording tips 44

Registration i

Remove lens hood 48

Replace the light bulb 13

RESET button 9, 34

Reset switch 9

REW(rewind)/REVIEW button

8, 9, 22, 28, 29, 34, 35, 38, 39

Rewinding indicator 26

S

Safety information i

Safety precautions, battery 18

Safety tab 20

Searching during playback 39

Shoulder strap 3

attaching 11

Shoulder strap attachment rings 10, 11

Solving problems 52

SP speed 20, 38

Specifications 58

Speed

recording and playback 20

Status indicators 26

STEADY PIXbutton 9, 26, 33

Steady pix feature 33

Steady pix indicator 33

Stop-action pause 39

STOP/EJECT button

5, 8, 9, 17, 21, 22, 34, 35, 38, 39, 41, 43

T

Table of contents 1

Tape

inserting 5

Tape copying 41

Tape counter 27, 34

TAPE END indicator 27, 30

TAPE indicator 27

Tape positioning 39

Tape remaining display 27, 30

Tape warnings 27

Tape wheel 21

Things to avoid 57

Time and date

correct 22

display 22, 27

recording 23

setting 22

64

Tips

recording 44

travel 44

Title

record 23

Titler 35

chart of characters 37

correct an error 36

create a title 36

record on a tape in camcorder 37

record while copying a tape 37

TITLERbutton 9, 35, 36, 37

Tracking 39

TRACKING buttons 10, 38, 39

Travel Tips 44

Tripod

optional 46

using 46

Trouble checks 52

U

Unpack camcorder and accessories 3

V

Videocassettes 20

Viewfinder 6, 10, 24, 25

adjust for viewing 24

BRIGHT control 25

displays 26

eyepiece focus control 24

playback 38

tilt adjustment 25

W

Warnings i

Warnings, tape 27

Warranty, limited 60

Z

Zoom buttons 10, 28, 31

ZOOM indicator 27, 31

Zoom level indicator 27, 31

Zooming 31

65

_THOMSON CO NSU M ER ELECTRON ICS

10330 N Meridian Street

Indianapolis, IN 46290

_:)1998 Thomson Consumer Electronics, Inc.

Trademark(s) ® Registered

Marca(s) Registrada(s)

Printed in Japan

15331680

QR19423