RCA EZ207 EZ206/EZ207(EN) User Manual To The F6a2ebff 993a 4e37 995a D3fb648df0dd

User Manual: RCA EZ207 to the manual

Open the PDF directly: View PDF PDF.
Page Count: 2

Inserting microSD memory card
A microSD memory card (not supplied) is recommended for recording. It is installed
between the batteries in the front compartment.
The camcorder internal memory will only permit minutes of recording time, whereas the memory card may provide many hours
of recording.
Refer to “Battery installation” for more information on opening the front compartment.
To insert card, align card with Card Symbol on camcorder and slide in until a click is heard.
The card icon ( ) appears on the screen with memory card inserted.
Tips: Inserting a memory card while the camcorder is turned on lets you copy videos from the camcorder internal memory to the
memory card by pressing the + button. Please follow the instructions on the screen for operation.
To remove card, push card in until a click is heard and the card will pop out slightly, then
remove the card.
The camcorder supports a memory card capacity of 8 GB or less.
Setting date and time
You might be prompted to set the date and time after battery replacement or for the  rst time
you turned on the camcorder. Date and time setting can also be accessed anytime by pressing
and holding PLAY/PAUSE and ON/OFF together while the camcorder is turned o .
1. Press or to shift among month, date, hour and minute and press + or to set the
date/time values.
2. Press or to select DONE and then press the red RECORD button to save settings. Or
press DELETE to exit without saving.
Getting started
USB cover
v5.0 (EN)(US/MEX)
Using your camcorder
User Manual
EZ206/EZ207 RCA Small Wonder Camcorder
www.rcaaudiovideo.com
Congratulations on purchasing your new RCA Small Wonder Camcorder.
Please read these instructions for quick tips on using the product.
Turn on/o
Press and hold ON/OFF to turn on or o .
Camcorder will automatically turn o after 2 minutes if not in use.
Record
Press and release the red RECORD button (after
“READY” appears on the screen) to begin recording.
While recording:
A red and the elapsed time appears at the top
left corner of the screen.
The red recording light on the camcorder front
turns on.
Pausing a recording:
Press PLAY/PAUSE.
A pause indicator II replaces the red at the top
left corner and “Recording Paused” ashes in the
middle of the screen.
To resume recording, press and release PLAY/
PAUSE again.
Stop
While playing or recording, press and release the red
RECORD button to stop the playing or recording.
Play
Playback from recording mode:
1. Press PLAY/PAUSE once to start playback of the most recent video.
2. Press and hold PLAY/PAUSE for three seconds to play all videos, starting from the  rst one
in the memory card.
If no video is selected after playback has  nished, recording mode will resume after 5 seconds.
Playback from video preview mode (press or once from recording mode):
1. Press and release or to cue the previous or next video.
2. Press PLAY/PAUSE once to start playback of the current video.
3. Press and hold PLAY/PAUSE for three seconds to play all remaining videos, starting from
the current one in the memory card.
If no video is selected after playback has  nished, recording mode will resume after 5 seconds.
Other playback controls:
• Hold down or to fast rewind or fast forward the selected video during playback.
• Press PLAY/PAUSE to pause playback (a pause indicator II and the remaining playback
time  ash at the top left corner of the screen). Press the button again to resume playback.
Delete
1. Press DELETE and the last recording and “DELETE VIDEO ?” appear on the screen.
To select another video, press and release or .
2. Press and hold DELETE until the selected video is deleted.
3. To delete all videos, press & hold DELETE for 3 seconds and then repeat step 2.
Take photo
Press and release WEB PHOTO to take photo (photo resolution: 1280 x 960 pixel).
Zoom
Before or during recording:
Press + to zoom in.
Press to zoom out.
Volume
During playback:
Press + to increase volume.
Press to decrease volume.
Recording indicator
Camcorder strap hole
Tripod screw mount
Video quality selector
HQ: High Quality mode
webQ: Web quality mode
The selected setting (HQ or webQ) appears on the display screen during recording.
The HQ setting is recommended when planning to view video on a TV directly from the
camcorder.
* Recording duration is based on speci ed microSD card capacities. Actual recording capacity depends on type of video content
being recorded.
LCD screen
For self recordings, the LCD
screen can be rotated 180o.
Front cover
Refer to Battery installation for
more information.
Microphone
Lens
AV output
Audio/Video output for connecting to TV or other
AV equipment with the included AV cable.
Refer to “Viewing videos on TV” and “Recording videos to VHS
tape or DVD” overleaf for more information.
Audio speaker
Front cover lock
Front compartment
microSD card
1
2
3
4
Battery installation
1. Push (to the right) and hold the front cover lock.
2. Slide the front cover down and then lift up to open.
3. Replace or install 2 AA batteries. Make sure you align the battery polarities as indicated.
4. Replace the front cover and slide up to lock.
You may also need to insert a microSD memory card before replacing the front cover. Refer to “Inserting microSD memory card”
for more information.
EZ206/EZ207 SmallWonder Camcorder
• AV cable
• USB cable
2 x AA Batteries
• Wrist strap
• User Manual
Owner Registration card
Content of the box
In the case of low battery, a low battery icon ( ) will  ash on the screen. Please change
batteries when battery icon is  ashing.
Alkaline batteries are recommended for best results under normal use.
Settings Resolutions Approx. recording duration*
2 GB 8 GB
HQ (High Quality mode) 640 x 480 pixel 1 hour 4 hours
webQ (Web Quality mode) 448 x 336 pixel 2 hours 8 hours
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di erent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
In accordance with FCC requirements, changes or modi cations not
expressly approved by the manufacturer could void the user’s authority
to operate this product.
Managing videos on your computer
Windows computer requirements
Intel Pentium 4 800MHz with at least 512MB of RAM
Microsoft Windows® XP with Service Pack 2 or Windows Vista™
SVGA or better display monitor
Sound Card
Video card with display settings set at a screen resolution of 800x600 or higher
Windows Media Player 9 or later*
* Available for free download at www.microsoft.com
Connecting to a PC
1. Open the USB cover
2. Connect the supplied USB cable to the connection jack.
USB connector standard: mini-B
3. Connect the other end of the cable to the computer.
4. The  rst time you connect the camcorder to a PC,
the RCA application will start installation
automatically. Follow the instructions on screen for
installation.
If the installation does not start automatically, open My Computer and double-click the SmallWonder icon. Double-click rcasw_
setup to start the installation.
The installation sequence will only appear the  rst time you connect your camcorder to a PC. Each subsequent time you connect
the camcorder to that PC, the RCA Memory Manager application should open automatically.
Certain video codecs required to view videos on a PC are licensed under GPL Version 2. Please refer to www.gnu.org/licenses/old-
licenses/gpl-2.0.txt
Memory Manager® is proprietary software licensed by Audiovox Corporation. Text for the Memory Manager End User License
agreement for this product can be found in the Help Section of the Memory Manager application.
Save
To save all videos:
• From the View videos tab, click the SELECT button in the upper right corner to check all
videos and then click the SAVE button.
To save selected videos:
From the View videos tab, click the checkbox next to the video(s) you wish to save then
click the SAVE button in the upper right corner.
All videos will be saved to the default location: My Documents\My Videos\RCA Small
Wonder\Saved Videos\”Category”. (Category refers to the genre or category you assigned to
the video in the Video Details screen.) If no category was assigned, the video will be saved
under the default locations, …\Default.
You can add descriptive information about your videos by clicking the Video Details option
found on the single view mode under the View videos tab.
Delete
Deleting can be done in both the View and Share videos tabs.
1. Select the video(s) to be deleted by clicking on the checkbox next to the video(s).
2. Click the DELETE button (trash icon) located near the upper right corner.
In the Share videos tab, you must  rst select Email Videos or Upload Videos before following the steps above to delete videos.
Playback
While in the View videos tab, double-click any preview image, thumbnail or  le name
(depending on the viewing mode) to launch the video in larger single view mode.
While viewing the video, click the pause II button and then click EZ Grab™ located next
to the video to save the current screen as bitmap or jpeg  le. Click + or under the
playback screen to skip one frame forward or backward.
Email
1. Click the Share videos tab.
2. Select Email Videos.
3. Select the video(s) you wish to email by clicking on the checkbox next to the video(s) you
wish to send.
Audiovox Electronics Corp.
150 Marcus Blvd., Hauppauge, NY 11788
© 2009 Audiovox Electronics Corp.
Trademark Registered
The descriptions and characteristics in this owner’s manual are for the purpose of general reference
only and not as a guarantee. In order to provide you with the highest quality product, we may make
changes or modi cations without prior notice.
Viewing videos on TV
1. Plug in the AV cable (provided) – Insert the single connector
end into the camcorder (AV jack) and connect the double
connector ends to the corresponding video (yellow) and audio
(white) input jacks on the TV.
TV output standard: NTSC
2. Turn on the TV and the camcorder.
3. Switch the TV to the selected video input (refer to your TV manual for instructions).
4. You may play and delete videos viewed on the TV by using the camcorder buttons.
Recording videos to VHS tape or DVD
1. Plug in the AV cable (provided) – Insert the single connector end into the camcorder and
connect the double connector ends to corresponding video (yellow) and audio (white)
inputs of the recording device (VHS or DVD recorder).
2. Turn on the camcorder and the recording device.
3. Switch recording device to the video input connected to the camcorder. (Refer to your
user manual of the recording device for instructions).
4. Start recording of your recording device and press and hold PLAY/PAUSE on the
camcorder for 3 seconds to play all videos on the camcorder.
Refer to “Play” under “Using your camcorder” overleaf for more information on other playback options.
For customer service and technical support
4. Click the EMAIL button.
Videos will be automatically compressed into a more email friendly WMV format and size for sending. If you have a lengthy
recording of 5MB or larger  le, you may wish to use the Upload feature instead.
Upload
Uploading is another way to share larger videos/ les or to share a video with someone using
dial-up modem connection.
1. Click the Share videos tab.
2. Select Upload Videos from either YouTube or Box.net
3. Login to the online account provided by YouTube or Box.net. (Registration is free)
4. Select the video you wish to upload by clicking on the button next to it.
5. Click the Upload Video button.
Optional: Enter the email address of anyone you wish to notify of the video. An email containing a hyperlink to view the video
online will be sent to them. No registration is required to view the video.
Videos will be compressed into a more web friendly WMV format and size for uploading. The maximum size for a single upload is
35 MB.
Edit
Trim your video clips to include only the best footage. Better yet, trim several video clips and
then join them together into one movie.
1. Click the Edit videos tab.
2. Click and drag the desired video(s) from the thumbnail collection to the Stage at the
bottom of the page.
3. Click on a video in the Stage to load it into the edit window to the right.
4. Use the markers to set the new Start and End points of the video clip.
5. Repeat this with any or all videos in the Stage until completed.
6. You may rearrange the videos in the Stage by dragging them left or right.
7. Click on the Save button to save the new movie.
The original video clips will remain untouched in their current location. The new movie will be saved to My Documents\My Videos\
RCA Small Wonder\Edited Movies directory.
For more detailed instructions on using RCA Memory Manager, please refer to the help section
in the software. RCA
EZ206-A
RCA
EZ207-A
WARNING: TO PREVENT FIRE OR
ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
Warranty information
12 Month Limited Warranty
Applies to RCA Audio/Video Products
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the
original retail purchaser of this product that should this product
or any part thereof, under normal use and conditions, be proven
defective in material or workmanship within 12 months from
the date of original purchase, such defect(s) will be repaired or
replaced with reconditioned product (at the Company’s option)
without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty,
the product is to be delivered with proof of warranty coverage (e.g.
dated bill of sale), speci cation of defect(s), transportation prepaid,
to the Company at the address shown below.
This Warranty does not extend to the elimination of externally
generated static or noise, to correction of antenna problems, loss/
interruptions of broadcast or internet service, to costs incurred for
installation, removal or reinstallation of product, to corruptions
caused by computer viruses, spyware or other malware, to loss
of media,  les, data or content, or to damage to tapes, discs,
removable memory devices or cards, speakers, accessories,
computers, computer peripherals, other media players, home
networks or vehicle electrical systems.
This Warranty does not apply to any product or part thereof which,
in the opinion of the Company, has su ered or been damaged
through alteration, improper installation, mishandling, misuse,
neglect, accident, or by removal or defacement of the factory
serial number/bar code label(s). THE EXTENT OF THE COMPANY’S
LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE
COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY
PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities.
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF
THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF
24 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE
SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY. No person or representative is authorized to assume
for the Company any liability other than expressed herein in
connection with the sale of this product.
Some states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or
consequential damage so the above limitations or exclusions may
not apply to you. This Warranty gives you speci c legal rights and
you may also have other rights which vary from state to state.
How to make a warranty claim:
If your product is capable of storing content (such as an mp3
player, digital voice recorder, etc), it is recommended to make
periodic backup copies of content stored on the product. If
applicable, before shipping a product, make a back up copy
of content or data stored on the device. Also, it is advisable to
remove any personal content which you would not want exposed
to others. IT IS LIKELY THAT CONTENTS AND DATA ON THE DEVICE
WILL BE LOST DURING SERVICE AND REFORMATTING. AUDIOVOX
ACCEPTS NO LIABILITY FOR LOST CONTENT OR DATA, OR FOR
THE SECURITY OF ANY PERSONAL CONTENT OR DATA ON THE
RETURNED DEVICE. Product will be returned with factory default
settings, and without any pre-loaded content which may have
been installed in the originally purchased products. Consumer will
be responsible for reloading data and content. Consumer will be
responsible to restore any personal preference settings.
Properly pack your unit. Include any remotes, memory cards,
cables, etc. which were originally provided with the product.
However DO NOT return any removable batteries, even if batteries
were included with the original purchase. We recommend using
the original carton and packing materials.
Include evidence of purchase date such as the bill of sale. Also
print your name and address and a description of the defect. Send
via standard UPS or its equivalent to:
Audiovox Electronics Corp.
Attn: Service Department.
150 Marcus Blvd.
Hauppauge N.Y. 11788
1-877-833-3491
Insure your shipment for loss or damage. Audiovox accepts no
liability in case of damage or loss en route to Audiovox.
Pay any charges billed to you by the Exchange Center for service
not covered by the warranty.
A new or refurbished unit will be shipped to you freight prepaid.
What we will do:
Provide you with a new, or at our option, a refurbished unit. The exchange
unit is under warranty for the remainder of the original product’s warranty
period.
For Canada Customers, please ship to:
Audiovox Return Centre,
c/o Genco, 6685 Kennedy Road,
Unit#3, Door 16, Mississuaga,
Ontario, L5T 3A5
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Important battery information
Any battery may leak electrolyte if mixed with a di erent battery
type, if inserted incorrectly, or if all batteries are not replaced at the
same time.
• Any battery may leak electrolyte or explode if disposed of in  re
or an attempt is made to charge a battery not intended to be
recharged.
• Discard leaky batteries immediately. Leaking batteries can cause skin
burns or other personal injury. When discarding batteries, be sure
to dispose of them in the proper manner, according to your state/
provincial and local regulations.
Manufacturer/ Responsible party
Audiovox Electronics Corp.,
150 Marcus Blvd., Hauppauge, NY 11788
1-317-810-4880
(Please note this phone number is for regulatory matters only. No
technical or product support is available via this number.)
For Your Records
In the event that service should be required, you may need both the
model number and the serial number. In the space below, record the date
and place of purchase, and the serial number:
Model No.
Date of Purchase
Place of Purchase
Serial No.
Service Information
This product should be serviced only by those specially trained in
appropriate servicing techniques. For instructions on how to obtain
service, refer to the warranty included in this Guide.
Technical Speci cation
Product: Digital Camera Recorder
Brand: RCA
Model: EZ206/EZ207
Electrical Consumption: 2 x AA Battery
IMPORTADOR PARA MEXICO:
Audiovox Mexico, S. de R.L. de C.V.
Ejercito Nacional 436 Piso 3
Col. Chapultepec Morales C.P. 11570
Mexico, D.F.
AME0712174Y4
EXPORTADOR:
Audiovox Electronics Corp
150 Marcus Blvd, Hauppauge, NY11788.
For information on new and upcoming
products and to register your new player,
visit www.rcaaudiovideo.com.

Navigation menu