RCA Direct View Digital 27 To 40 TV Manual L0310160

User Manual: RCA RCA Direct View Digital 27 to 40 TV Manual RCA Direct View Digital 27 to 40 TV Owner's Manual, RCA Direct View Digital 27 to 40 TV installation guides

Open the PDF directly: View PDF .
Page Count: 64

Telev,s,o

User's G ,de

Changing Entertainment. A lain.

l pQrtant mnfQr ation

WARNING

To reduce the risk of fire or

electric shock, do not expose

this TV to rain or moisture.

To reduce the risk of electric shock, do not remove

cover (or back). No user serviceable parts inside.

Refer servicing to qualified service personnel.

This symbol indicates

"dangerous voltage" inside

the product that presents a

risk of electric shock or

personal injury.

_IL This symbol indicates

important instructions

accompanying the product.

Caution: To prevent electric shock, match wide blade of

plug to wide slot, fully insert.

Attention: Pour _viter les chocs electriques, introduire

la lame la plus large de la fiche dans la borne

correspondante de la prise et pousser jusqQ au fond.

Refer to the identificationlrating label located on the back panel of your

product for its proper operating voltage.

FCC Regulations state that unauthorized changes or modifications to this

equipment may void the user's authority to operate it.

Caution: Using video games or any external accessory with fixed

images for extended periods of time can cause them to be

permanently imprinted on the picture tube (or projection TV picture

tubes). ALSO, some network/program Iogos, phone numbers, etc.

may cause similar damage. This damage is not covered by your

warranty.

Cable TV Installer: This reminder is provided to call your attention to

Article 820-40 of the National Electrical Code (Section 54 of the Canadian

Electrical Code, Part 1) which provides guidelines for proper grounding and,

in particular, specifies that the cable ground shall be connected to the

grounding system of the building as close to the point of cable entry as

practical.

Product Registration

Please fill out the product registration card and return it immediatel_ Returning the card allows us to contact

you if needed.

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record

the serial and model numbers in case you need them. The numbers are located on the back of the television.

Model No.

Serial No.

Purchase Date:

DealerlAdd resslPhone:

G-LINK, VCR Plus+, C3,PlusCode, GUIDE Plus+, and GUIDE Plus+ Gold are trademarks of Gemstar Development Corporation.

The VCR Plus+ and GUIDE Plus+ systems are manufactured under license from Gemstar Development Corporate and VCR Index Systems t3.V.

respectively.

GEMSTAR AND THOMSON MULTIMEDIA INC. ARE NOT IN ANY WAY LIABLE FOR THE ACCURACY OF THE PROGRAM

SCHEDULE INFORMATION PROVIDED BY THE GUIDE PLUS+ SYSTEM. IN NO EVENT SHALL GEMSTAR OR THOMSON

MULTIMEDIA INC. BE LIABLE FOR ANY AMOUNT REPRESENTING LOSS OF PROFITS, LOSS OF BUSINESS, OR INDIRECT,

SPECIAL, OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE PROVISION OR USE OF ANY INFORMATION,

EQUIPMENT, OR SERVICES RELATING TO THE GUIDE PLUS+ SYSTEM.

VCR required for recording.

Key Features Overview

Your TV is equipped with features that will add to your TV walching experience. "File tkJlowing

intbrmation sun]marizes a l_w of these teatures. Chapter 2 provides more inl_)rmation about the

rest of the TV's fl,atures and how to use them.

Late Night Conan

On-screen Program Guide

Description: Thv G[ II)E Phls+ system is an on-scwen interactive list of

programs and intbrmation that is built into your TV. You can scroll through the

guide to see what's on and tune directly to that program front tile guide. You

can also browse progrants by category with the sort tl.ature.

When you access the News t>ature, MSNBC will appear in your video window if

it's availal)le tim)ugh your TV.

One-Touch VCR 1,'ecording is another benefit of tile GI_IDE Plus+ syshqn. You

don't have to remember lo program your VCR or use tile 111enus in your VCR lo

set tip a recording.

Requirements:

• Remove the Demo Pin from tile G-LINK jack.

• Contplew the on-screen interactive setup. You'll find detailed instructions in

Chapter 1.

• One-Touch VCR 1,'ecording: You nlus[ connect the G-LINK cable to the TV

and place one of the wands in front of the rentote sensor on the VCR.

• If you have a cable box, connect tile G-LINK cal)le to the TV and place one

of tile wands in Dont of tile remow sensor on the cable box.

V-Chip: Parental Controls

Description: You can block programs and movies by content, age-based

ratings, and/or movie ratings.

Requirements:

• Set Lip the Paretztal Ct)tzlrol.s 111t.nuin the TV's main menu (Chapter 2 has

details).

• The broadcasters nmst use tile rating system when they send tile program to

your TV in order tk)r your TV lo block the program.

(This page intentionally left blank)

2

TabW@ @f C@nt@nts

Introduction: Key Features overview ..................................................... 1

On-screen Program Guide ......................................................................................... 1

V-Chip: Parental Controls ........................................................................................... 1

Chapter 1: Connections & Setup .............................................................. 5

Things to Consider Before You Connect ......................................................................... 6

Protect Against Power Surges ................................................................................... 6

Protect Components from Overheating ................................................................... 6

Position Cables Properly to Avoid Audio Interference ............................................ 6

Important Stand and Base Safety Information ........................................................ 6

Use Indirect Light ....................................................................................................... 6

Demo Pin .................................................................................................................... 6

Choose Your Connection .................................................................................................. 7

Connection: TV + VCR....................................................................................................... 8

Connection: TV Only ......................................................................................................... 9

Connection: TV + VCR + Satellite receiver ................................................................... 11

The Front of Your TV ...................................................................................................... 12

Why You Should Connect This G-LINK Cable ............................................................... 13

How to Find the Remote Sensor ............................................................................. 13

Placing the G-LINK Wands ....................................................................................... 13

Complete the Interactive Setup ..................................................................................... 15

Set the Menu Language .......................................................................................... 15

Complete Auto Channel Search .............................................................................. 15

The GUIDE Plus+ System Setup ................................................................................ 15

What to Expect ............................................................................................................... 19

The Buttons on the Remote Control ............................................................................. 20

Chapter 2: Using the TV's Features ........................................................ 21

About the GUIDE Plus+ System ..................................................................................... 22

Downloading Data ................................................................................................... 22

Getting In & Out of the GUIDE Plus+ System ......................................................... 23

The GUIDE Plus+ System Menus .............................................................................. 23

Grid Guide ................................................................................................................ 23

Sort ............................................................................................................................ 25

News .......................................................................................................................... 26

Schedule .................................................................................................................... 26

Messages ................................................................................................................... 27

Setup ......................................................................................................................... 28

Channels ................................................................................................................... 28

How to Get More Information About an Advertisement or a Program ............... 29

GUIDE Plus+ Menu Items ............................................................................................... 29

Channel Banner .............................................................................................................. 30

3

bJe of C@ntents

Parental Controls and V-Chip ......................................................................................... 30

How V-Chip Works ................................................................................................... 31

V-Chip TV Rating Limit ............................................................................................. 32

Blocking Specific Content Themes .......................................................................... 34

Viewing Specific Content Themes ........................................................................... 35

V-Chip Movie Rating Limit ....................................................................................... 35

V-Chip Unrated Program Block ............................................................................... 37

Channel Block ........................................................................................................... 37

Front Panel Block ..................................................................................................... 37

Lock/Unlock Parental Controls ................................................................................ 38

Chapter 3: Using the TV's Menu System ............................................... 39

How to Use the Different Types of Menus and Control Panels .................................. 40

Menus ....................................................................................................................... 40

Control Panels .......................................................................................................... 40

Audio Menu .................................................................................................................... 42

Picture Quality Menu ..................................................................................................... 42

Screen Menu ................................................................................................................... 43

Using Closed Captioning ................................................................................................ 43

Closed-Caption Modes ............................................................................................. 43

Channel Menu ................................................................................................................. 44

Time Menu ...................................................................................................................... 44

Other Information: ................................................................................. 45

Troubleshooting .............................................................................................................. 46

Care and Cleaning .......................................................................................................... 49

RCA TV Limited Warranty .............................................................................................. 49

Accessory Order Form .................................................................................................... 51

Index ................................................................................................................................ 53

4

t

Connections &Setup

Chapter Overview:

• Things to Consider Before You Connect

•Choose Your Connection

•Connections

•The Front of Your TV

•Why You Should Connect This G-LINK Cable

• Plug in theTV

• Put Batteries in the Remote

•How to Use the Remote Control to Complete the

Interactive Setup

•Turn on the TV

• Complete the Interactive Setup

•Buttons on the Remote Control

Changing Entertainment.

Graphics z_secl _ithi_z tbis publiccttio_z at?.fiJr r_greJe_ztatio_z o_zl_'. 5

C@nnections Setup

Things to Consider Before You Connect

Protect Against Power Surges

• Connect all components betore you plug any of their power cords into the wall outlet.

• Turn ofl the TV and/or component betk)re you connect or disconnect any cables.

• Make sure all antennas and cables are properly grounded. Reti, r to the Important

Sali, guards sheet packed with your TV.

Protect Components from Overheating

• Don't block ventilation holes on any ot the components. Arrange the components so that

air can circulate t_ceely.

• Don't stack components.

• When you place components in a stand, make sure you allow adequate ventilation.

• If you connect an audio receiver or amplifier, place it on the top shelf so the heated air

t:rom it won't t]ow around other components.

Position Cables Properly to Avoid Audio Interference

• Insert each cable firmly into the designawd jack.

• If you place components above the "I'_, route all cables down the side of the back ot the

7

"F_ instead (7t straight down the middle of the back (7t the TV.

• If your antenna uses 300-ohm twin lead cables, do not coil the cables. Also, keep the twin

lead cables away from audio/video cables.

Important Stand and Base Safety Information

Choosy the location tor your TV carefully. Place the TV on a stand or basv/hat is ot adequate

size and strength to prevent the TV t_combeing accidentally tipped over, pushed off, or pulled

off. This could cause personal injury and/or damage the TV. Reter to the Important Sal_.guards

sheet packed with your TV.

Use Indirect Light

Don't place the TV where sunlight or roonl lighting will be directed toward the screen. Use soft

or indirect lighting.

Demo Pin

YOUmust remo_,e the Demo t in from the G-LINK jack on the back of

your TV in order lk)r your TV to operate properly and to connect the

G-LINK cable.

6Chapter I

C@nnections Setup

Choose Your Connection

There are several ways to connect your TV. Please use the lk_llowing charl to determine which

connection is best tor you. Proceed to the appropriate page and connect your TV.

Components Cables

Needed

Coaxial

G-LINK cable

Coaxial

G-LINK cable

Connection

Title

TV + VCR

TV Only

Coaxial

G-LINK cable

TV + VCR +

Satellite Receiver

Go to...

page 8

page 9

pages 10-11

Cables Needed to Connect Components to Your TV

The pictures I_elow show the cables n_,ecled lk_r the connections represented in this Ix)ok.

Note: t lease tocat_ the G-Lh'_7_ cab!e (proz ided) u,he_z 3oz_ re getting reac(9 to s_t z_p3 our

7'1_: You need to connect this cab& to 3'our 7'1_ and to your VCR and/or cable box in

orcler fiJr all (f tbe /_,atures q/'the pr(_ram guide to u,ork proper(7.

G-LINK cable Coaxiai cable

Ghapter I7

C@nnections Setup

TV (back panel)

CABLE/

G-LINK ANTENN_

VCR

AUDIO

0 OUT? _L I, FBOMANI CH3

From Cable,

Cable Box,

or Antenna

Connection: TV + VCR

1.

2.

*

Connect your TV to your VCR

Connect a coaxial cable to the CABLE/ANTENNA jack on your TV and to the Output Jack on your

VCR (sometimes labeled OUT TO TV).

Connect cable or antenna to your VCR

Connect the coaxial cable fronl your cabl_, outl_.t, cable box, or antenna to the Input Jack on your

VCR (sometimes labeled IN FROM ANTENNA or IN FROM ANT).

Connect the G-LINK cable to the TV

A. If you haven't already done so, remove the Demo Pin Dora the G-LINK jack.

B. Connect the G-LINK cable to the G-LINK jack on the TV. Next step, place the wands of the G-

LINK cable to work with your VCR (instructions are on p. 13).

Go to page 13

8Chapter I

C@nnections Setup

TV (back panel)

CABLE/

l_From Cable

or Antsfln8

Connection: TV Only

1. Connect the TN to your cable or antenna

Connect tile coaxial cable t_comyour cable or antenna to the CABLE/ANTENNA jack on the back

of your TV

Go to page 14

2. If you're connecting a cable box, connect the G-LINK cable

A. If you haven't already don(, so, r_,move the Demo Pin t_om the G-LINK jack.

B. Connect the G-LINK cable to lhe G-LINK jack on the TV. Next step, place the wands of the

G-LINK cable to the cable box (instructions are on p. 13).

Go to page 13

Chapter I9

C@nnections _ Setup

SATELLITERECEIVER FromCableorAntenna

VCR

OUT

VIDEO R L

INFROMANT

i_ OUTTOTV

S-VIDEO

SATELLITE

IN

Satellite

Signal

VIDEO AUDIO

_OUT_

RL

_,N_ R L

OUTTO W

TV (back panel)

ANTENNA

10 Chapter I

C nnections Setup

Connection: TV + VCR + Satellite Receiver

1. Connect coaxial cables to the Satellite Receiver

A. Connect the coaxial cable t_()m your cable nudet, cable box, or antenna to the Input Jack

on your satellite receiver (sometimes labeled IN FROM ANT).

I3. Connect the coaxial cable t_nm your satellite dish antenna to the Input Jack on your

satellite receiver (sometimes labeled SATELLITE IN),

2. Connect the Satellite Receiver to the VCR and to the TV

A. Connect a coaxial cable to the Output Jack (sometimes labeled OUT TO TV) on the

satellite receiver and to the Input Jack on the VCR (sometimes labeled IN FROM ANT),

I3. Connect a coaxial cable to the Oulput Jack on the VCR (sometimes labeled OfT TO TV)

and to the CABLE/ANTENNA jack on the TV.

3. Connect G-LINK cable

A. If you haven't done so, remove the Demn Pin tknm the G-LINK jack.

I3. Connect the G-LINK cable to the G-LINK jack on the TV. Next step, place the wands of

the G-LINK cable to work with your VCR (instmctinns are on p. 13).

Go to page 13

Chapter I1 1

C@nnections Setup

The Front of Your TV

Front Panel

If you cannot locate your r_'illOh" yOLl can LIS_"the" bLlttons of your ]'V to operate"

many of the TVs t_.atures.

MENU Brings up the Main menu. When in the menu system, it selects

highlighted items. Also returns you to the previous menu. Press and hold MENU

lbr two seconds to access the G[IDE Plus+ system.

CH vScans down through tile current channel list. When you're using tile TV's

menkl system, it acts like tile arrow down button on tile remote control.

CH AScans up through tile channel list. When you're using tile TV's menu

system, it acts like tile arrow tip button on tile remote control.

VOL-- Decreases tile volHine. When you're using tile TV's lllentl system it acts

like the lett arrow button on the remote conrail.

VOL + Increases the volume. When yotl're tlsing the TV's illentl svstel]] it acts

like tile right arrow button on tile remote control.

POWER Turns tile TV on and off:.

12 Chapter I

C@nnections Setup

Why You Should Connect This G-LINK Cable

The G-LINK cable enables the GUIDE Plus+ system (the on-screen interactive program guide) to

wnrl,: with your VCR and/or cable box.

Cable Box- If your "1"*7is connected to a cable box you must connect the G-LINK cable to

receive TV program listings {'or your area, and to tune directly to a channel when the program

guide is on your TV screen.

VCR-- It your TV is connected to a VCR and you don't connect the G-LINK cable, one-touch VCR

recording won't work. The other fl,atures nt the guide will work prnperly.

G_LINK cable

G_LINK wands

How to Find the Remote Sensor

You have to place the G-LINK wands in f_contof tile remote sensor on tile VCR and/or cable bnx.

Some cable boxes and VCI,'s have tile remote sensor labeled on the unit, If tile remote sensor

isn't labeled on your VCR and/or cable box, you need to use tile remote control that came with

tile VCR and/or cable box to locate the sensor.

]*

2.

3.

Turn off the VCR and/or cable box.

Hold the remote control (not the one that came with your TV, but the one that came with

the cable box and/or VCR to which you're attaching the G-LINK cable) so that it is touching

the trnnt nt the component.

Slowly move tile remote control across the lrnnt nt the component (VCR or cable box) while

you press tile power button on and off, YOu must press and release the power bumm each

time you move the remote (holding down tile button won't work).

......../

II II

4. When the component turns on, you've located the remote sensor.

If you don't have both a

cable box and a VCR

connected to your TV,

just coil the cable of the

extra G-LINK wand with a

twist tie and leave it

behind the TV

Placing the G-LINK Wands

Place the G-LINK wands in front of the remote sensor on your VCI,' and/or cable box

approximately one inch away from tile remote sensor (see instructions below).

TV (bagk panel)

.... @ _,%%

Chapter I13

C@nnections _ Setup

Plug in the TV

Plug the end of the power cord into the wall outlet. Match the wide blade nt tile

plug with the wide slot in tile outlet. Insert the plug completely into

tile outlet.

Put Batteries in the Remote

1. Remove tile battery compartment cover on tile remote.

2. Insert new batteries. Malch the polarities (+ and -) on the batteries with the

diagram on tile remote.

3. Put the ba/lery compartment cover back on tile remote.

d225

Use the arrow buttons and the OK

button to move through the menu

system.

How to Use the Remote Control to

Complete the Interactive Setup

The technical term is "Navigation" - how you move through the on-screen

menus. The theory is the same throughout tile menu screens: highlight your

choice and select it.

To highlight a menu item, press the arrow buttons on tile remote to highlight

one (7t'/he items listed on tile screen, tse tile Lip or down arrow button to 111ove

up or down. [se tile right or left arrow button to move right or leti.

To select the item that you've highlighted, press OK.

Note: Highli_,4htecl*nearts that the me nu item stancl._ outji'om

other menu items o* the li._t(appeat:_ clarke,; b*v_@tet;or a

d(/]brent coto_9.

Turn on the TV

Press the POWER button on the remote control or lhe TV (tile first screen of the

Interactive Setup appears), The menu screens 'time nut" after a period of time if

you don't make a selection, "llle tips in this section lull you how to access tile

Setup menu screens manually.

14 Chapter I

C nnections Setup

Complete the Interactive Setup

The menu system in your TV allows the TVs fl, atures to work properly. In this

Tip book, we call it the 'interactive setup'/)ecause the TV asks you questions, you

To access the setup menus manually, answer, and the TV makes the appropriate adjustments. The first time you turn

press MENU and choose Setup. on vour TV the setup screens appear automatically.

Set the Menu Language

The first part of the SF,7_/Pasks you to select your preferred language for the

menu system.

1. Highlight your preterred language tnr the menu system.

2. Press OK to select that language.

Complete Auto Channel Search

The next part ()f the SETZ_ ) asks you if you want the TV to search for all

channels viewable through your antenna or cable TV system. This is sometimes

called "auto programming."

1. Press OK to tell the TV to begin searching R)r channels. A progress report

appears on the screen.

2. When the screen on the TV tells you the search is complete, press OK (the

+

tirst GUIDE I lus system setup screen appears).

Note: [/'9,oz¢skip AuIo Cbannel Search **ow,you can access it lat*,r

Ibroz¢gh the Cbannd m_ *m. _k_ Cbapter 3 jbr more delait,_.

The GUIDE Plus+ System Setup

The G{IDE Plus+ system is an on-screen interactive program guide that lists

Tip what shows are on TV in your area. In order to receive program listings, you

If you move to a new zip or postal

code, or if any of your information

changes, you need to access the

setup screens from the TV's main

menu-- press MENU, choose GUIDE

Plus+ Menu, and choose GUIDE

Plus+ Setup.

need to complete the following steps.

The G-LINK cable nmst be connected to the back of your TV, and the wands

must be placed in tront nt the remote sensor on the cable box and/or x,CR in

) + .order tnr the GLIDE I lus system to work (go back to p. 13 tnr details).

+.1. You should see a screen displaying the features of the Guide I lus system.

I tess OK to continue.

2. The next screen asks you to locate setup inaterials and hardware. Once you

have done this, press OK to continue.

C_hapter I 15

C@nnections Setup

Step 1: Identifying Your TV's Location

1. If your country is highlighted, press OK on the remote control

If your country isn't highlighted, press tile up or down arrow button on tile

remote control to highlight your country and press OK.

2. Use tile number buttons on your ren_ole tn enter your zip cnde.

Press OK when you're finished.

Note: [/'yoz¢rposlal code contains l_,lte_:_,press the z¢pand down arrow

bz_ttons on 3'olaf remote to enter l_,tt*,rs,and press the _v_@tarrow button

to go to the next .space. 7be lgfl a,row bz¢tton *noz,esyou to the lgfl.

Step 2: Configuring for Cable

The next series of screens asks you about your cable setup. "Ib supply your TV

with tile correct TV program listings, tile GUIDE Plus+ system needs to know if

your TV is connected to cable.

1. If your TV is connected to cable, highlight Yes and press OK.

If your TV isn't connected to cable, highlight NO and press OK (STt£P.:J:

Co_il_gz_rin/4.ibr a I/%'Rappears).

2. If you have a cable box connected to this TV, highlight Y(,s and press OK on

your remote control.

Note: 7be next series o/'screens are z,e_3' impo_qant because G{,gl)t_ IOh¢s+

._Fst*,mmz¢stj'ind the correct cab!*, box ir{fiJrmation in orcler/br the

program scb#ghd*, to be cotwect in .yoz¢r 7Y_ program gz¢icl*,.

If you don't have a cable box connected to this TV, highlight No and

press OK (ST/J ° 3: Co*d_J_Hngjbr a VCR appears).

If you're not sure which channel is the

cable box's output channel, consult

the book that came with your cable

box or contact your cable company.

16 Chapter I

C@nnections Setup

,Highlight tile channel to which you have to tune your TV in order to see

cable programming, and press OK (a screen appears reminding you to

connect your G-LINK cable to your TV and cable box).

Note: Cham_el 0)_ is the most common.

4. Highlight your brand of cable box, and press OK.

If your brand isn't listed, highlight Not Listed and press OK.

iiiiiiiiiiii/iiiiii_iii_ii{i!iiii!i¸

5, Make sure your cable box is on.

Tune the cable box to channel 02 (use the remote control that came with

your cable box, or press the channel buttons on the cable box).

Press OK (the GUIDE Plus+ system starts testing codes).

lmportant Note: When code testing Ls ir_p_%_ress, don't toucb)'our 7'K

VCR, cable box or at(}, (f tbe remote controLs j_)r tbese products.

,Look at your cable box. It it is still on and changed to channel 09, tile test

was successful. Highlight Yes', and press OK (Slt/I):_: Co_fi_z_ri_zg.fiJra VCR

appeat:O.

It your cable box didn't change to channel 09 or turned itself ofl, you have

two choices: ?ViJ_'md 7&st,this code_again.

70st this code again: If you think tile TV, the cable box, or any of the

remote controls might have been touched or bumped during the test,

highlight Test this cod(, a<,4ain and press OK (tile GUIDE Plus+ system runs

tile same set of codes).

3)iz. If you don't think the test ,,,,;asinterrupted, highlight 3)k_and press OK

(GUIDE Plus+ system tests the next code).

Repeat tile previous instructions until the TV finds tile correct cable box

code. Follow the instructions on tile screen.

Note: I/'the TV can t.find )our cable box code, a troubleshootim4

checklist appeat:_. Cat @d(y re_,ieu, each checklist a*M /bllow the

i*zstrz_ctions or* the scree**.

Chapter I 17

C@nnections Setup

Step 3: Configuring for a VCR

1. If: your TV is connected to a VCt{, press OK.

If: it is not, highlight 3/0 and press OK (a screen appears reminding you to

connect your G-LINK cable to your TV and VCP.).

2. Use the up and down arrow buttons to highlight tile brand of your VCR that

is connected to the TV.

If: your brand isn't listed, highlight Not Listed and press OK.

3. Tune your VCR to channel 02. Next, turn OFF your VCR. When you

complete these steps, press OK to begin testing.

Important Note: When cod*_te.;ting i._in progre.;s, don't toz_ch yoz_r 7'_

I/CR, or a_zy ql't,Se remote controts fiJr these prodz_cts.

lit. Look at the front display of your VCR. If your VCR turned on automatically

and changed to channel 09, the test was successful. Highlight Yes"and press

OK.

If: your VCR didn't change to channel 09, you can either choose A_bor 70st

this cocl_,a_,daDz.

If you think your TV or relnotes might have been touched during tile test,

tune your VCP. to channel 02, turn ofl your VCR and highlight 7>st this

code again.

If: you don't think tile test was interrupted, highlight NO. Tune your VCR to

channel 02 and turn off your VCtL Press OK (the GUIDE Plus+ system starts

testing another set of codes.)

Keep lk)llowing tile previous instructions until the VCR finds the correct

code.

18 Chapter I

C@nnections Setup

Tip

Leave your cable box turned ON to

download program information_

Leave your VCR turned OFF to record

programs,

Note: [/'tbe G_)E Ph_s+ ,_>_temcan't locate tbe co!Tect codejbr the VCR,

a ti._t(_/'trouble._booti_z_,_inst_ctio_s appear._ Io betpyoJ_ bq/breyoJ_ t_y

a_,qain.

• 7_7>,VCR co_d_quration again: repeal VCR setup.

•7k,st alternate codes: lests selected brands and ij'tbt._jkttl._-,tbe test

continues witb all codes ill the ._FMem.

• Skip tbis step: the ._Fslem won't be able to automatically schedule

pr_4_rams to record on your VCR.

Step 4: Confirming Your Settings

1. Check t() nmke surv all settings are complete and c()rrect. If all settings ar_.

complete, highlight Yes, end.wtJq)and press OK. If your cable box and/or

VCR code testing failed, you should see IN(20_'III)LETt_where the cable

box and VCR codes are listed. Once setup is complete, additional

screens appear.

If any settings are incomplete or inc()rrect, highlight 3;b, r_'peat sempprocess

and press OK. Follow the instructions on the screen.

2. You can choose to view a demn of the GUIDE Plus+ fl.atures, which may

rake a few minutes to load. It you don't want to see the demo right now,

press OK to watch TV.

What to Expect

The next time you turn on your TV, the G[IDE Plus+ systum will appear on the

screen. The lbllowing examples explain what you might see:

•If all of the program infk)rmation has been sent to your TV, the GUIDE Plus+

system appears with all ()f y()ur TV program listings.

•If the program inlk)rmatinn hasn't been sent t() your TV yet, an ()utline of

the GUIDE (without TV pr()gram listings) will appear on the screen.

Program inlbrmation is usually sent to your TV at night.

•If the TV detected that you have multiple cable companies in your area,

STEP 5: Choosing Your Cbannd LineJq) appears.

Features of the GLIDE Plus+ syslum are explained in Chapter 2.

"lk) clear the guide from your screen, press CLEAR or GI_IDE on the

remote contrnL

Chapter I19

C nnections Setup

POWER

0

VOL GO CHAN

GUIDE INFO

© Zb©

O K2;> O

MENU CLEAR

'0 '(2)

00

,0 00

t 00

The Buttons on the Remote Control

0-9 (Number buttons) Enter channel numbers and time settings directly

thrnugil tile remote cnntroL

To enlcr a two-digit channel, press tim two digits. ]b enter a three-digit channel,

press and hold the first digit tk)r two seconds until two dashes appear to the

right of tile number, then add the second two. Example: to rune to channel 123,

press and hold 1 tk/r two seconds, press 2, then press 3.

Arrow buttons (up, down, left, right) Press the arrow buttons to move

through tile on-screen menu system.

CH (up and down) buttons Scan up or down through tile current channel

list. Press once to change tile cimnnel up or down; press and i_nld to continue

changing channels.

CLEAR Removes any menu or display I_com tile screen and returns you tn

TV viewing.

GO BACK Returns you to tile previous channel.

GUIDE Press G{IDE to make tile G{IDE Plus+ system appear on tile screen.

Press GUIDE again to remove it i_cnm the screen.

INFO Displays channel information.

INPUT Changes your TV to its video input channel. "File Video Input Cilannel

is tile channel your TV nlos[ tune to in order fi_r you to access a cnmponcnt

that's connected to your TV's VIDEO IN and AUDIO IN jacks. Example: to view

a tape t_cnm your camcorder, connect the camcorder to tile TV's AUDIO and

VIDE() jacks with tim audio/video cables.

MENU Displays the TV's Main menu. You can also press and hold for 2

seconds to display the GLIDE Plus+ system.

MUTE Lowers the volume to its minimum le;el. I ress again to restore ;olume.

OK When a lllenH is on tile screen, press OK to select tile item that

is highlighted.

POWER Turns tile "rv on and off,

SKIP If you press this button betk>re you change tile cllannel, the TV waits 30

seconds and automatically goes back to tile original channel. Eacll time you

press SKIP, you add 30 seconds (Le, if you press SKIP two times betk_re you

cllange tile channel, tile TV waits 60 seconds and aulonlatically turns back to tile

original channel).

VOL (up and down) buttons Decrease or increase tile TV's volume.

20 Chapter f

2

Using the TV's Features

Chapter Overview:

• All About the GUIDE Plus+ System

•The Channel Banner

•Parental Controls and V-Chip

Changing Entertainment.

Grat)bics used u_ith#z tbis publicatio_z at_,./_Jr repre_e_ztatio_z o_z/_'. 21

Using the Features

Action Video Program Menu

buttons window information options

Promotional Channel

information listings

About the GUIDE Plus+ System

The GUIDE Plus+ system is an interactive on-screen program guide that lists TV

schedules tk)r your area and allows your TV direct control of a cable box and

VCR. You nlust first set up tile GUIDE Plus+ Menu system in order to view lhis

on-screen program guide (see Chapter 1 Ik)r details). Press GUIDE to bring up

the GLIDE Plus+ system.

There are six sections of tile GLIDE Plus+ sysl_.m:

•A row of Action buttons at the top of tile screen (1, 2 and 3)

• Vide() window

• Program information

• A row of menu options (Grid, &J,q; Ne'u EScb#duk,, Messu/des,

Channe& Setzcp)

• Channel listings

• Promotional intk)rmation

Note: 7be G{,JI)ti Ptus+ ._Fslem screens llb_strated in tbi._ book are

represerttations q}'wbat 3'ou are ilk@' to see. Not all cbar_nel._; pro£)rams;

and GSql)t,2Plus+ #{f!Jrmation depicted will be az.'ailuble in your area.

NewjL.utures and options can be downloaded to the G{,ql)t£ Plus+

._Fstem, so these too are subject to change.

Tip

Since the program information provided

by the GUIDE Plus+ system is based on

your locale, you will need to run Setup

again if you move to a different zip or

postal code.

Downloading Data

The GUIDE PIus+ system is not awtilable until it completes its first download of

program inl_)rmation. When the power is turned off, tile TV locates a 'host

channel" that carries GLIDE Plus+ system data containing program schedule

and channel lineup inlkmamtion. A channel lineup is tile list of stations and their

respective channels.

"R)ensure that your first download of data is complete, you should leave your

TV off overnight. Downloads occur several times a day. The TV must be turned

off tk)r GUIDE Plus+ system data to download.

If the TV loses power or is unplugged, GLIDE Plus+ sysl_.m program listings

may be lost. When power is restored, make sure tile setup inlkmnation is still

correct. The GUIDE Plus+ system will recefve updal_.d program inlk)rmation

during tile next scheduled download.

Channel Lineup

If:more than one cable company services your area, you nmy be prompted with

S'It/P 5: Cboosin<,_Your Cbannel Lineup afi_.r tile first GLIDE Plus+ system

download, You will need to identit_ your cable company by selecting the

correct channel numbers lk)r the stations in question.

• Use the up and down arrow buttons to change tile channel group and

press OK when the correct channel group is highlighled.

22

Using the TV%

©

CLE_

PressGUIDE on the remote control to see

the GUIDE Plus+ system. To remove the

program guide from the screen, press

OK, GUIDE, or CLEAR.

Getting In & Out of the GUIDE Plus+ System

To ent_,r the, G[ I1)E Plus+ system:

• Press GUIDE on tile remote.

• Press and hold MENU fl_r 2 seconds on the t_ont panel.

To exit tile G{IDE Plus+ sysl_,m:

• Highlight a program and press OK to exit tile G{IDE Plus+ system and tune

to lhe channel.

• Press GLIDE lo exit tile GUIDE Plus+ system and tune lo tile channel

displayed in tile vide() window.

• Press CLEAR lo exit tile GUIDE Plus+ system and return lo tile original

channel.

The GUIDE Plus+ System Menus

The GLIDE Plus+ system ofll, rs seven dit'l_renl options on the Menu bar: Grid,

Sort, News, Sche(hd< Messa_,4es,Channel.* and 5_,tnp. "R_access tile Menu bar:

1. Press GUIDE to access tile GUIDE Plus+ system.

2. Press MENU or use lhe up and down arrow buttons lo select tile Menu bar

(the Grid Guide appears by defimlt).

3. tse tile left and right arrow bull(ms to access ()tiler menus.

4. Press OK, or MENU, or use tile down arrow button to see tile menu nptions.

Grid Guide

The Grid Guide appears each time yOLlenter tile GUIDE PILls+ system. It

displays tile current programming Ik)r each channel. The current program is

displayed in tile video window.

• Press tile tip and down arrow buttons on tile retools, to browse channel

listings and tile channel up and down buttons to page through tile listings.

Use tile right and left arrow buunns lo browse future program listings.

To tune to a channel, highlight tile program you want to view in tile

channel listing and press OK. Press CLEAR to exit tile GUIDE Plus+ system

and return to/he original channel. Press GUIDE to exit tile G{IDE Plus+

sysl_,m and tune to tile channel in lhe video window.

Then use tile Grid Guide Action Buttons as described next.

23

Using the Features

Grid guide Grid guide

menu action buttons

selection

Grid Guide Action Buttons

Actinn buttons will change according _ where you are in the GUIDE Plus+

system, Be sure to lnnk at the action bar before pressing the

command numbers.

When highlighting the program, the tk)llnwing Action bul/ons appear:

Watch Press 1 on the remote to place a timer in tile Schedule l_)r the TV lo

turn on and tune to the program highlighted in the channel listing. When

tile TV turns on, the GUIDE Plus+ system will automatically appear with the

scheduled program highlighted and tuned in the vide(> window.

Go To Press 2 on the remote to bring Lip the direct dial box and enter the

number of the channel you want. This will highlight tile channel and

current program in tile channel listing of tile Grid Guide. Press OK to tune

to tile highlighted channel. If tile vide() window is unlocked, it will

automatically tune to the channel.

•Record Press 3 on tile remote to place a timer in tile Schedule t_)r tile VCR

to record the program highlighted in tile channel listing.

If you have a cable box, changing channels on tile TV will not cause the

cable box channel to change while recording.

Record will only appear if you have set up GUIDE Plus+ system and

specified your VCR type.

The program ini_)rmation window will display a confirmation when you have

successfully scheduled a program to watch or record.

Note: i/'you have selected two programs Io watch or record w,Sicb b<qin

at the same time or overlap, yoJ_ will receive a timer co*l/lick message.

YoI! ll21*sl choose belll_eerl lbe ilg;o programs.

When highlighting the Channel names (the left column on tile channel listing),

tile t_)llnwing Action buttons appear:

• Lock/Unlock Press 1 to lock or unlock tile video window to either stay at

one channel as you browse tile GUIDE Plus+ system (lock) or change as

you browse through difl>rent channels (unlock).

Go To Press 2 on the remote to bring up the direct dial box and enter the

number of the channel you want. Press OK to highlight the channel and

current program in tile channel listing of the Grid Guide. If the video

window is locked, press OK to tune to the highlighted channel. If the vide()

window is unlocked, it will automatically tune to that channel.

24

Osing the

Sort menu

selection

Categories

Sort

The Sort menu lets you browse programs by catvgnry. The channel to which

you are currently tuned is displayed in the video window.

To Sort:

1. If the GLIDE Plus+ sysl_.m isn't on your screen, press GUIDE on your

remote control.

2. Press MENU on the remote lo select the Menu bar.

3. Use the arrows to highlight Sort. When Sort is highlighted li_>rthe first time,

the Movies category is displayed. "II_ereafler, the last category used becomes

the detlmlt. A listing of subcategnries is displayed below the category name.

Use the let/: and right arrows to highlight other categories.

4. Use the up and down arrow buttons to highlight a subcategnry. For

example, highlight A!/and press OK (the GUIDE Plus+ system sorts

the programs).

5. Press the up and down arrow buttons to review the list one program at a

time. Press the channel up and down to review the list one page at a time.

6. Select MENL to return to the menu bar, or press GUIDE or CLEAR to exit

the GUIDE Plus+ system.

Then use the Sort Menu Action Bunnns as described next..

Sort Menu Action Buttons

When viewing the results of a Sort, the ff_llnwing Action but_ns appear:

•Watch Press 1 on the remote to place a timer in the Schedule, and then

t_)llnvv the on-line help t_)r Alrther options. Placing a timer in the Schedule

will cause the TV to turn on and tune to the program highlighted in the

channel listing at the predel_.rmined time.

• Record Press 3 on the remote to set the VCR to record the program

highlighted in the channel listing. If you have a cal)le box, changing TV

channels will not cause the cal)le box channel to change while recording.

The program inti_mnation window will display a confirmation when you have

successfully created a timer to watch or record.

Note: [/',},oJ_have selected two programs h) watch or record which h<_4in

at the same time or overlap, yoJ_ will receive a timer co*{/lict message.

You ml¢sl choose helween t,_e two programs.

Note: Be sz_re that chllqng hSe GUll)IS Ph_s+ system selzq) you spec(fied

that yoz_ hart, a VCR.

25

Using the Features

News menu News menu

action buttons selection News

"I'll(" N6_lgS in(*nu lets you brovvs(, curr(,nt news stork, s by h(,adlin(',

1. If the GLIDE Plus+ sysl_.m isnt on your screen, press GUIDE on your

remote control.

2. Press MENU on the remote control to select the Menu bar.

3. Use the arrows to highlight News (if MSNBC is available on your TV, it will

appear in the vide() window).

4. Use the up and down arrows lo highlight a story.

• Use the up and down arrows to browse the list one story at a time.

• Use the channel up and down to browse through tile list one page at

a tinl{'.

5. Press the right arrow button to see full text.

6. If there are multiple pages of text, press the right or left arrow button to

page ti_rward or back through the pages of text. Press the down arrow to

view the next story.

7. Select MENll to return to the Menu bar, or press GUIDE or CLEAR on the

remote to exit tile GI_IDE Plus+ system.

Schedule menu

selection Schedule

The Schedule menu allows you to alter timers lk)r either viewing or recording

programs. The GUIDE Plus+ system allows one-touch VCR recording if you

have connected tile G-LINK cable to your VCR. See Chapter 1 tk_r more details

on connecting tile G-LINK cable.

To schedule a program lo watch or record:

1. If tile GLIDE Plus+ sysl_.m isn't on your screen, press GUIDE on your

renlot(" control.

2. Press MENU on the remote to select tile Menu bar.

3. Highlight a program within tile channel listing.

4. Select Watch or Record from tile Action buttons bar. The timer is then

autonmtically logged into the Schedule menu.

5. If you select Record, make sure to place a blank tape in the VCR and turn

it oil

Note: [/',},oJ_have a cable box connected/o3'oz_:r TV and VCR, tJ¢ne )'our

VCR to the cable box oJ_tput charmel prior to tur_l#_g off'the VCR.

The program intkmnation window will display a confirmation when you have

successfully scheduled a program to watch or record.

Note: [/',},oJ_ have selected two pro2rams to watc,5 or record w,Sich begin

at the same time or overlap, 3'oJ_ will receive a timer co*_/lict message.

You ml_sl choose belween the two pr(_rams.

26

Using the

"lk) remove or change the frequency (daily, once, or weekly) of a scheduled

event, access tile 5"cht,dlllt, lll(,nLl fronl the Menu bar.

1. Press GUIDE to bring tip the GUIDE Plus+ system.

2. Press MENU on the remole to select the Menu bar.

3. tse the arrows to highlight the Sch#dJde menu selection.

4. [se the tip and down arrows to highlight the program you want to edit.

Then use the Schedule Menu Action Buttons as described next.

Schedule Menu Action Buttons

When viewing the Schedule menu the _)llowing Action buttons appear:

• Remove Highlight the Watch or Record tinter you wish to remove flcom

the schedule and press 1 on the remote.

•Change Highlight the Watch or Record timer you wish to change and

press 3 on the remote to toggle the flcequency between the tbllowing

choices:

DAILY records the same program each day Monday through Friday.

ONCE records only on that day.

WF,F,KLY records the program each week at the same time.

Messages menu

selection Messages

Occaskmally you will receive messages regarding your GUIDE Plus+ system, as

well as special programming int_mnation. You can access these messages flcom

the M(,ssages inen[l on the Menu bar.

"lb read inessages:

1. It your G[IDE Plus+ system isn't on your screen, press GUIDE on your

remote control,

2. Press MEN[ on the remote to select the Menu bar.

2. Use the arrows to highlight the Messages menu selection.

3. Highlight the message you want to read by using the up and

down arrow buuons.

4. Press INFO to display the full lext of the message. If the text continues

beyond the screen, press INFO to view the next page of text, Once you

have reached the end of the message, press INFO to close the expanded

inl_)rmation and return to the Messages screen.

Then use the Messages Menu Action Buuon as described next.

Messages Menu Action Button

When viewing the M_<_sagesmenu the lk)llowing Action button appears:

• Remove Highlight the message you want to delete and press 1 on

the remote.

27

Using the Features

Channels menu Channels menu

action buttons selection

\

Channels

You can custonfize tile channel listing by enabling or disabling the display of

certain channels. Fnr instance, you may disable channels that you never watch.

You can restore disabled channels at a later point in time.

1. If tile Guide Plus+ system isn't on your screen, press G{IDE on your

remote contrnl.

2. Press MENU on the remot_ _to select the Menu bar.

3. Use the right and let]: arrows to highlight the Channel._ menu selection.

4. [se the up and down arrows to select a channel.

Then use the Channels Menu Action Buttons as described next.

Channels Menu Action Buttons

While browsing the Channels menu, tile _/llnwing Action but_ns appear:

•Cancel Press 1 on the renlote to cancel any changes you made since

entering the Channel._ Menu.

•Change Press 2 on the remote, to change the channel number [_)r the

highlighted channel line.

• On/Off Press 3 on the remote to toggle the state nt the channel between

O_ and Ojf

Setup

Thv S_,lup menu allows you to access tile GUIDE Plus+ system setup inlkmnation. "l_ access the

Setup option:

1. If lhe Guide Plus+ system isn't on your screen, press GUIDE on your remote control.

2. Press MENU to select the Menu Bar.

3. [se the right arrow to highlight tile 5>rap menu selection.

4. tse the up and down arrows to select (2ha'age sysWm sellitl/gs , Revic*w options, or

Vigil dcII2o.

•Change system setting* Confirms the settings you completed in the G{IDE Plus+

system setup are correct.

• Review option* Displays the GUIDE Plus+ auto display options.

On Automatically displays tile G{IDE Plus+ system when you press the POWER

bul/on on the remote control

Off Disables the GtIDE Plus+ system l)com being displayed when you press the

POWER butlon on the remote control.

• View demo Runs the G{IDE Plus+ system demonstratio_

Note: [/'you have not completed,Four GUll)l/Plus+ ,_}_'temsetup, these options will not he

availabh,. A screen witl prompt Fou to comph, te your setup.

28

Using the TV%

How to Get More Information About an

Advertisement or a Program

_) find out more inlbrmation about a program, advertisemem or special, use

the let_ arrow bunon to highlight the channel listing or promotional

inl_)rmation box.

Requesting more inlk)rmation about a particular show displays the PlusCode

programming number and the Shows on Next li)r that channel.

Press the INFO button lo exit the expanded inlk)rmation screen.

GUIDE Plus+ Menu Items

The G{,qDE Ph_s+ Menu gives you access lo fl,atures in the GUIDE Plus+ system.

"1_ access the GUIDE Ph_s+ Menu:

1. Press MEN[ on the remote.

2. Highlight GUI1)E i)tus+ Menu and press OK.

Each menu and the sub-menus are listed below:

GU1DEPlus+ Setup Displays the GUIDE Plus+ system setup screen.

Change system settings Confirms the settings yOLlcompleted in the

GUIDE Plus+ system setup are correct.

Review options Displays GtlDE Plus+ system auto display options.

View demo Runs tile GUIDE Plus+ system demonstration.

GUIDE Plus+ Label Displays the GUIDE Plus+ label menu.

On Displays the station name when you change channels.

Off The station name isn't displayed when you change channels.

ContinuousDemo Runs the GtlDE Plus+ demonstration until it is turned off.

"1_)turn off the demonstration you must turn off the TV.

Note: I]'you have not comp/_4_,d your G{,JI)t5 Plus+ system setzlp, these

options will not be az,clilable. A screen uill pl_mJat you to compk, le

your semi).

29

Using the Features

Sample displays on a Channel Banner.

Channel Banner

There are several indicators that might appear when yotl press the TV or INFO

bunons on the remote. This display is called the Channel Banner. The fl)llowing

list describes the items on tile Channel Banner screen (let]: to right and top to

bonom).

12:01 Displays the current tilne.

The lock is displayed to indicate when Parental Controls are

locked or unlocked.

Displayed when Closed Captioning is available on tile

current channel.

ESPN

6O

ti3)l

Displays the label assigned to tile current channel.

Displays the current channel or input channel (FRN'D.

Mute is displayed when you mule the audio.

Stereo is displayed when the current channel is broadcasting

in Stereo.

SAP

00:00

Displayed when the current channel is broadcasting SAP

)

(Second Audio t rograln) intbrmation.

Displayed when the Sleep Timer has been set.

Disphtyed tocount down time lelt on tile commercial skip

(SKIP) timer.

Parental Controls and V-Chip

"llle Parental Control._ menu allows you to program your TV st) that children

cannot see certain progranls, channels, or use the t_ont panel controls.

"llle first three choices in the Parental Cor_troA menu involve sotlware inside

your TV (rel_rred to as V-Chip) which allows you to block TV programs and

movies based on violence, sex, or other content you may believe children

should not view. In other words, it lets you program your TV st) it won't display

certain programs.

Once you block programs, you or ()tiler aduhs can unblock programs by

entering a password.

By default, tile sottware inside your TV is turned "ott," so if you don't want to

use this fl.ature, you can just ignore it.

3O

Using the

How V-Chip Works

When turned 'on,' tile V-Chip sot_ware reads a code that ntnst broadcasters send with

programs. That code tells the sol'ware the program's age-based rating (TV-MA, TV-14, etc.) and

content themes [(Violence (V), Adult Language (L), etc.)l. I1 you have blocked tile rating and/or

content themes that tile program contains, you ,,,,,ill receive the message, "This channel is not

approved tnr viewing," when you tune to that particular channel.

Broadcasters are not required to provide content themes, so prngranls received with no content

themes ,,*,'illonly be blocked if you block their age-based rating. You can also block out

programs that have been given a rating of 'Not Rated," and programs that are considered

'unrated" because no code has been sent by tile broadcaster. "File TV age-based ratings and

content themes you can block are listed in tile tk/llnwing table.

Age-Based

Rating Description and Content Themes for Age-Based Ratings

Mature Audience Only. Specifically designed to be xiewed by adults and may be unsuitable fi_r children

TV-MA under 17. It contains one or more of the following content themes: crude indecent hmguage (L) explicit

sexual activity (S), or graphic violence (V).

Parents Strongly Cautioned. Contains some materi tl that mmy parents would find unsuitable fi)r children

TV-14 under 14. Parents are strongly urged to exercise gre tter care in monitoring this program md are cautioned

against letting children under the age of 14 watch unattended. This program contains one or more of the

R)llowing content themes: intensely suggestive dialogue (I)), strong coarse language (L), intense sexual

situations (S), or intense violence (V).

Parental Guidance Suggested. Contains material that parents may find unsuitable for younger children. Many

TV-PG parents may want to watch it with their younger children. Tim program contains one or more of the following

content themes: some suggestive dialogue (D), infrequent coarse language (L), some sexual situations (S), or

moderate violence (V).

TV-G General Audience. Most parents would find this program suitable fbr all ages. It contains

little or no sexual dialogue (I)) or situations (S), no strong language (L), and little

or no violence (V).

Directed to Children 7years mid older. Designed for chikhen ages 7 md above. It may be more

TV-Y7 tppropriate for children who htve required the developmental sMlls needed to distinguisll between mtke

believe and reality. Fbemes and elements in this program may include mild fantasy violence (FV) or comedic

violence, or may frighten children under the age of 7.

TV-Y All Children. l'bemes and elements in tiffs program are designed fbr a young audience, including children

from ages 2 6. It is not expected to flighten younger children.

31

Using the Features

V-Chip TV Rating Limit

The _Cbip TVRating Limit lets you decide which TV programs can and cannot

be viewed.

"lb set TV programming limits:

]. Choose Parental ControA l_om the Main menu. If Parental Controls have

previously been locked, you must enler your password, If they are not

locked, you ,,*,'illget a message reminding you that your limits will not be

ef[_ctive until you lock Parental Controls.

2. Press MENU to continue.

3. Highlight and select V-Chip 71ZRatin_,4Limit.

4. Once you get to the V-Chip 71ZRatin<,gLimit screen, use the arrow buttons

and OK on your remote to change the status of a TV program rating or

content theme l]com View to Block.

The lk_llowing sections give you more details about how to change the status of

TV program limils.

The V-Chip Rating Limit Screen

The t_|lowing is an example of where items are located within the Rating Limit screen.

Rating Status Field

Lets you s('h'ct _\hcthet the status of the age_bas_'d rating limit to

the lc'_ is View ot lflock

Rating Field

Lets you select from a

list ofage-based ratings

you _an bkxk or _ie\_

Content Themes

Lists the content themes you

C_ln ])lock oI vi(2_,v

Fields

Lets youselect which

Col]tent themes to view for

the selected rating, and

whether the status of the

content thelne is cLlrr_q]tly

View (V) or Bklck (B)

Rating Settings Area

Lets you s_'e the _m'rent block view state of agl_d3ased ratings and

assodated content. "lhe \'ie_ (V) settings me _och'd in green, and the

Block (B) settings arc coded in md

32

Using the

Rating Rating Content

field status field status fields

Tip

When you change the status of a rating to

Block, the system will automatically block

higher ratings and all corresponding

content themes.

Hierarchy of Age-Based Ratings

TV-MA Mature Audience Only

TV-14 Parents Strongly Cautioned

TV-PG Parental Guidance Suggested

TV-G General Audience

TV-Y7 Directed to Children 7 years

and older

TV-Y All Children

Blocking Age-Based Ratings

You can automatically block all program ratings above a specified age-based

rating level. For example, if you only want your child to watch programs that

have a TV-G rating and lower (in other words, you ,,*,'anttile child to watch

TV-G, TV-Y7, and TV-Y), then you need to block out other programming with

higher ratings.

To

1.

2.

3.

4.

block programs with higher ratings:

First, determine tile lowest level rating you don't want tile child to watch

(see chart of age-based ratings on next page).

Press tile left: and right arrow buuons to highlight tile Rating field.

Press tile up and down arrow buttons on tile rem()te tn scroll through the

age-based rating limits. Keep scrolling until tile rating cnrrespnnding with

tile lowest rating you do not want tile child lo ,,*,.atchappears on the screen.

In tile example discussed above, you would scroll through tile Ratin,_4field

until TV-PG appears, since tile highest rating you want tile child to walch is

TV-G.

Press tile right arrow button to move tile yellow highlight lo tile

Statics field.

5.

.

7.

Press tile lip or down arrow button to toggle between Vieu and Block. "File

status tk)r tile rating listed to tile left and all higher ratings automatically

changes to Block (and B).

Press OK on tile remote lo return tn tile lkl_*nunr exit the screen when ynu

are finished.

Select Lock Parental Controls t_om tile Parental Control._ menu. Enl_.r a

password, and if you have not already set your password, you will be

prompted to enter it again to cnnfirm.

33

Using the Features

Rating Rating Content

field status field status fields Viewing Age-Based Ratings

A_r you block age-based ratings, you have the option of changing some of the

ratings back to View.

1. Determine which blocked rating you want lo view.

2. l_se the up and down arrow buttons to select the rating with a status

of Block.

3. Press tile right arrow button to move the yellow highlight lo the rating

status field.

4. Press tile up button to select View.

Note: 7be content status.fields corresponding Io the unblocked rating

become Vieu as well. 7bey, and the ageJ)ased rating status are the only

fields that automaticatl)' cban_,4e back to Vieu when you complete

tbi._process.

Note: You must remember to lock Parental Controt.Lfi_r rating limits to

take, _flOct.

Content Themes

D Sexually explicit dialogue

L Adult language

S Sexual situations

V Violence

FV Fantasy Violence

TV-Y All Children

Rating Rating Content

field status fieM themes

Blocking Specific Content Themes

You can block programs based on their content. (Content is represented by the

D, L, S, V, FV and TV-Y on your screen. See the beginning of this section li_>r

details.) When you block a content theme tk)r a particular rating, you

automatically block that content theme fi_r higher rated programs as well.

For example, if you do not want your child to watch programs that have adult

language (L) rated TV-PG or higher, then you could block out all programming

TV-PG and above containing adult language.

"lk_block program content:

1. Determine the lowest level of content you don't want the child to watch.

2. l_se the up and down arrow buttons on the remote to scroll through tile

age-based ratings until tile rating that corresponds with tile lowest content

you do not want the child lo watch appears. (In the example above, you

would scroll through the ratings until the TV-PG rating appeared.)

Content status

fields

34

Using the

,

4.

5.

Press tlle right arrow bu/lnn to move tile highlight to tlle field

corresponding with tile content theme you wish to block nut.

Press tlle up or down arrow button to change content status ti'()n] Vtn/3.

All higher ratings' content theme will automatically change to B.

Press OK to return to tile n]('n[l or ('xit tile screen.

Note: Broaclcaste_:_ are r_ot required toprovide content themes or age-

based rati_zgs. Progrctms received with no content themes will onlF be

blocked i/'you block their age-based rating.

Note: You must remember to lock Parental Conlrol._ jbr rati*_g limits to

take el/Oct.

Rating

field Rating

status field

Content

themes

Content status

fields

Viewing Specific Content Themes

If you block specific content themes, you have tile option of going back and

changing some of tile content themes back to (_9 Vieu_

1. Deh'rmine tile content themes you want to change to (V) I/Tc-_u'.

2. tse tile up and down arrow buttons to scroll through tile age-based ratings

until tile rating whose cnnh'nt theme you want lo change to Vieu appears.

3. Press tile right arrow bu/ton lo move tile yellow highlight to a particular

content theme status, such as tile Bunder language (L) corresponding with

TV-14.

4, Press tile lip or down arrow buKon to change its status back to 17. Your

child would then be able to watch programs with TV-14 adult language

content, but not programs with TV-PG or TV-MA language content.

Note: Onl)' the content hSeme st_tus cotwes.l)or_cling to TV-14

(L) language cba_ges to (V) View. Higher rat_,d content t,Seme._) such as

hSat./br TV-MA tat_guage, do not change.

V-Chip Movie Rating Limit

You set moviv rating limits by blocking movies ratvd abow. a specified levvl.

How to block movie ratings and view movie ratings is explained in tile next two

sections.

"lb access tile V-CIIIP MO VIii RA71NG LIMiT menu:

1. Press MEN[ on tile remoh" control (tile TVMAhVMtk'_rUappears).

2. Select Parental ControL_ (press 6).

3. Select V-Chip Movie RatinJ 4Limit (press 2).

35

Using the Features

Rating field Rating

status field

Rating field Rating

status field

Blocking Movie Ratings

If you only want your child to wash movies that have a PG rating and lower

(in other words, movies rated PG and G), then you could automatically block

(}Litall other movies with higher ratings.

1.

2.

.

4.

block IlK)vies:

Highlight tile Rating field and press tile up and down arrow buuons to find

the rating that is the lowest rating you don't want the child to watch. (In

the example above, you would highlight the rating status button

corresponding to PG-13, since the highest rating you want the child lo

watch is PG.)

Press the right arrow button to highlight the rating Statics field, Press the Lip

and down arrow buttons to change the button from Vic*w to Block. All

higher ratings automatically change to Blocl<

Press OK to return to tile nlenn or exit tile screen.

If Parental Controls are not locked, you must lock them st) the movie rating

limits will take efli*ct.

Note: 5k)me movies mc O,be giz,er_ a Not Rated (A_) rating. After blocking

movie, ratings, you re.st set NR to Vieu separately to vi_.u NR movies.

Viewing Movie Ratings

A_r you block movie ratings, you have the option of changing some of the

rating status buttons back to View:

1. Highlight the Rating field and press the Lip and down arrow buttons to find

the rating you want to view.

2. Press the right arrow button to highlight the rating SlatJ¢s field. Press the Lip

and down arrows to change the buuon from Block to View.

For example, if movies with a rating of PG-13 and higher are blocked, you can

change the rating status corresponding with NC-17. Your child would then be

able to walch all movies with a G, PG, and NC-17 Rating.

3. Press OK to exit the screen, and be sure parental controls are locked.

36

Using the

V-Chip Unrated Program Block

Selecting this option lets you decide if programs that the V-Chip recognizes as

' unral_,d" can be vi_,wed. Note that ' unral_,d" TV programs may include news,

sports, political, religious, local and weather programs, emergency bulletins,

public announcements, and programs without ratings.

View All unrated programs are awtilable.

Block All unrated programs are not available.

Note: You must remember to lock Parenial ConiroL_ jbr rating limits to

take ql)lbct.

Channel Block

Selecting this option lets you decide what channels can be viewed.

View Makes the selected channel viewabl_,.

Block The, t_nnt panel and remora, control CH (channel) buttons will tune

only to channels that you have marked as Vic_uz "II_e remora, will still tune

to the blocked channel if you use the digits to access the channel, but the

channel will be blocked.

Don't l_>rget to lock parental controls after you change the status of Channel

13lock. If you do not, the channel block will not take effect.

Note: [i'you have a digital cable box cbannets 126-999 can be blocked

but u ill not be remoz,ableji_om ,},our scan list.

Front Panel Block

Selecting this option lets you block (disable) or unblock (enable) the TV's _nnt

panel. The remote still tunes to any channel. Front Panel Block can:

• Keep children t_om watching TV when the parent is not present.

• Keep young children t_om playing with the buttons.

(When using this as a Parental Control method, you should remove access to

any remote that is capable of operating the television while you have the front

panel blncked.)

Don't t_>rget to lock parental controls after you change the status. If you do not,

the t_nnt panel block will not take ef'll.ct.

37

Using the Features

Lock/Unlock Parental Controls

Selecting this option lets you lock and unlock parental controls settings using a

password.

If yon do not lock parental controls, none of the settings for v-Chip,

Channel Block, or Front Panel Block will take effect.

If you ff>rget your password, simultaneously press and hold MENL on the

television and volume down on the remote l_r 3 seconds. Nothing appears on

the screen, Parental Controls simply unlock and you can re-enl*.r a password

via Lock Parental Control._.

38

3

Using the TV's

Menu System

Chapter Overview:

• How to Use the Different Types of Menus and Control Panels

•Audio Menu

•Picture Quality Menu

•Screen Menu

•Using Closed Captioning

•Channel Menu

•Time Menu

Changing Entertainment.

Grcq)bics used u_itbi_z this publicatio_z are./_)r ret)rese_ztatio_z o_z/y,. 39

Using the enu

How to Use the Different Types of Menus and

Control Panels

The "I_/'s menu system has three types ()f screens: menus, cnn/rol panels, and choice lists. Ybu use

tile buttons on tile remote or tile t_contpanel to access tile menu system and make changes to tile

settings.

The tk)llowing pages explain how to use tile diff..rent types of menus to adjust tile teatures nl

your TV.

Menus

The first menu is called tile Main menu, Press MENU on tile remote or on tile

front panel to bring up the Main menu. Note that holding MEN[ Ik)r 2 seconds

displays the GUIDE Plus+ system.

Menus take you to another menu or a control panel. There are two ways to

select _t choice in a menu:

rip

Feel free to explore the menu system

If you're ever unsure where you are in

the menu system, or you're just plain

tired of exploring, press CLEAR to

remove the menus from the screen

and start over again.

[se your arrow buttons on your remote contrnl to highlight your choice,

and press OK.

Press a nulnl)er button on tile relnote. For exalnple, in the Main l]]enu press

3 to go straight to the Scree** menu.

Exiting a menu

"l'h(_r( _ at( _ thr(_( _ ways t() (_xit a lll('ntl:

•Highlight tDcitand press OK.

•Press 0 on the remote,

•Press CLEAR. "File nn-screen displays are cleared from tile screen and you

return to TV viewing.

Control Panels

Control panels allow you to adjust tile defmlt settings on many lUatnres of your

TV. You can choose a setting, enter a number, or adjust a level such as tint or

brighmess. "lllere are three/ypes of control panels: sliders, numeric entry and

choice lists.

4O

Using the

Tip

If the control panel is not set to the

current time, use the arrows to go

back over the columns and the digits

to make changes.

You can also enter numbers by using

the up and down arrows on the

remote.

Sliders

Sliders are used to make adjustments to a particular control.

"lk) use a Slider in a menu:

1. Press the up or down arrow button to select the slider control fk)r the

tl.ature you want to adjust.

2. Press the right or letk arrow button lo adjust the indicator line on the slider.

Numeric Entry

A numeric entry control panel is used to enter numbers nr lelters.

A pointer appears underneath the column you are changing.

1. Use the digits to enter a number in the column above the pointer.

2. Press the right arrow buunn lo move to the next column, then use the digits

to enter a number.

3. When you have finished entering inlk)rmation, press MENU or OK.

Choice Lists

Choice lists are used to choose a particular s_qting l_com a list. When the choice

list appears, the highlighted item is the one that is currently selected, or 'in

use."

Highlight a choice on a menu and press OK lo select that choice. You will then

return to the previous screen.

Now that you know how lo access the menus and adjust the control panels the

t_>llnwing pages provide a brief explanation of all the menu l>atures. The

teaIures are organized in order of their location on the Main Menu.

41

Using the enu

1 Audio Audio Menu

Mute Press OK lo reduce the TV's volume to its mininlunl level. Press OK

again to restore tile volumt,.

Audio Processor Displays a choice list of available audio modes, which

control tile way tile sound conies througil your speakers. You can also access

tile ALq)IO PROCESSOR menu by pressing tile SO[ND button on tile remow.

Mono Plays tile sound in mono only. Use this selling wllen receiving

broadcasts with weak st_.reo signals.

Stereo Splits tlle incoming stereo audio signal into left and right channels.

Most TV programs and recorded materials Imve stereo audio. The word

STFJ_EOappears on tile TV when you tune to a program tlmt is broadcast

in stere<).

Second Audio Program (SAP) Plays the program's audio in a second

language, if one is awdlable. Tile word SAP appears on tile TV wllen you

rune to a program tlmt is broadcast witll SAP inl_)rmation. SAP audio is

broadcast in mono. SAP is also used to broadcast a program's audio with

descriptions of tile video fl)r tile visually impaired.

Picture Quality Menu

Basic Picture Controls Displays tile five slider controls fbr adjusting tile way

tile picture looks.

Contrast Adjusts tile difl>rence between tile light and dark areas of

tile picture.

Color Adjusts tile richness of tile color.

Tint Adjusts the balance between tile red and green levels.

Black Level Adjusts tile brighmess of tile picture.

Sharpness Adjusts the crispness of tile edges in the picture.

Wllen exiting this menu, tile Sat,t, Fersorml Pictz¢re Preset choice list will appear.

You can choose either Yes"or No. If you save tile settings as a Personal Picture

Preset, tile TV will store the se/lings so you can re-select them quickly if

someone changes the settings.

Picture Presets Displays a clloice list that lets you select one of tllree preset

picture settings: Bright Li<,4htit_/_;Normal L_btit_/_; S(?flLighting or 1)e_:s'onal

Pictz¢re Preset: Choose tile setting that is best Ik)r your viewing environment.

Auto Color Displays a choice list that lets you turn on tile t>ature that

automatically corrects tile color of tile picture. (Tills is especially uset\ll t_)r

tracking realistic flesh tone colors as you switcll flcom clmnnel to clmnnel.)

Choose O;_or Q/[/idepending on your pretl.rence.

Color Warmth Displays a choice list tlmt lets you set one of three automatic

color adjustments: Coolfl)r a more blue pale/le of picture colors; Normal; and

Warm fl)r a more red palette of picture colors. The warm setting corresponds to

tile NTSC standard of 6500 K.

42

Using the

Screen Menu

Closed-Caption Display Displays a choice list that lets you choose the way

closed captioning intbrmation is shown on the screen.

Off always No captioning inlk_rmation is displayed.

On always Captioning inlk_rmation is shown always, when awtilable.

On when sound is muted Captioning inlk)rmation is shown, when

available, whenever the TV's sound is muted. ('Ib mute the sound, press the

MUTE button.) The captioning inR)rmation is not displayed when the sound

is not muted.

Closed-Caption Mode Displays a choice list that lets you choose which

captioning mode is used f_)r displaying captioning int_)rmation.

Menu Language Displays a choice list that lets you select your preli, rred

language fi)r the menus: En/4lisb, Spanish or t,_'e_cb.

Using Closed Captioning

Many programs are encoded with closed-captioning information, which lets

you display the audio portion of a program as text on the TV screen.

Closed captioning is not awtilable on all channels at all times. Only specific

programs encoded with closed-captioning information are applicable. When a

program is closed captioned, the CCicon is displayed in the channel banner.

See Chapter 2 fbr more inl_)rmation about the channel banner.

If you don't know which Closed-Caption mode

to use, select CCI. CCI is probably the mode

that is used in your area. CC2, CC3, and CC4

are reserved for foreign languages, but are

rarely used at this time.

Closed-Caption Modes

The TV ot'lk,rs eight closed-captioned modes, including tour text modes.

To set tile Closed-C'cq)tion _llod_

1. Select Scr_,,n from the Main menu.

2. Highlight Closad-Captio** Mode and press OK (the Closed-Ccqation Motif,

appears).

3. Highlight your choice and press OK (the Sctwen menu appears again).

Note: 7_e 7_:vl modeo cover _zaarly ha(/'q/'tbepictz¢t'e on the screen to

cli.splc(ythe closed-caplio*zed le.vl. Most broadcasters z¢sethe CC mode,

which displc(Fs a./_w ti**esq/'ccqations at a litlle.

Turning off Closed-Caption

1. Select Sc_een_l_om the Main mvnu.

2. tress OK to select Closed-Caption Di.sJ)la>.

3. Highlight QffAlwco:._ and press OK. The closed captioning is mined ofl and

you go back to the _'C?*('(_ll menu.

43

Using the enu

Tip

To enter a number greater than 99, press and

hold "1" to enter the hundreds digit, then

press the two remaining numbers,

Channel Menu

Signal Type Displays a choice list that lets you select the current antenna

/ype. This option does not appear when the GUIDE Plus+ system is set up.

UHF/VHFAntenna Choose this if you are currently using an oflLair

antenna lk_rTV signals.

Cable TV Choose this if you are currently using cable or a cable box lk)r

TV signals.

Auto Channel Search Tells the TV to search automatically l_)r all the channels

available tllrnugh the antenna input. When tile TV finds an active channel, it

places it in the Normal channel list; inactive channels (weak stations or

channels with no signal at all) will be removed l_cnmthe channel list. If you are

using a cable box and have set up tile GLIDE Plus+ system, this option does

not appear.

List and Labels Displays a control panel that lets you edit your Normal

channel list and choose a six-character label t_)r each channel. Follow tile on-

screen directions to enter your channels and other inl_)rmation.

Channel #[se the tip and down arrows to scroll tip and down through

the channels available via your antenna. You can enter the channel number

directly using tile number buttons.

NormalList Only the channels included in tile Normal list are available

when you scan tip and down using channel up and down. tse the up and

down arrow buttons to indicate whether tile channel number indicated is

included (Yes) or is not included (No) in tile Normal channel list.

ChannelLabel tse the up and down arrow buttons to enter a six-

character label tk>reach channel. Hold the buunn down to scroll quickly

through the characters. The TV can store up lo 27 labels in memory.

Time Menu

Sleep Timer Displays a control panel that lets you select tile amount of time

you want to give the TV betk)re it shuts itself off.

Schedule Displays a control panel that lets you set up a schedule ti)r turning

the TV on and oft automatically. Reminder: you must turn tile schedule On. The

on-screen directions guide you through the steps needed to set the schedule.

Set Time Displays a control panel that lets you enter tile current time. The on-

screen directions guide you through the steps needed to set the time. If your

GUIDE Plus+ system is set Lip, it will automatically update your time and this

option will not appear.

44

4

Other Information

Chapter Overview:

• Troubleshooting

•Care and Cleaning

•Limited Warranty

•Accessory Order Form

•Index

Changing Entertainment. Again.

Grcq)bics used u_itbi_z this publicatio_z are.f_)r ret)rese_ztatio_z o_z/y,. 45

Troubleshooting

Most problems you encounter with your TV you can correct by consuhing the Troubleshooting list that tk)llows.

TV Problems

TV won't turn on

Press the POWER button.

Make sure the TV is plugged in.

Check the wall receptacle (or extension cord) to make sure it is qive" by plugging in something else.

Something might be wrong with your remote control. Press tlm PO_rER button on the front of the TV. If the TV turns on, check the

remote control solutions on p. 48.

Tim front panel buttons may be locked (disabled). Use tim remote control to unk)ck the front panel controls by selecting the Front

Panel Bloc/_¢in tim Pare_ital Controls menu and choosing [/nblocle.

Buttons don't work

"I'h_"front pan_'t buttons may b_" IocM'd (disabI_'d). lse the" remote control to unk)ck the" front pan_'l controls by s_qecting the Front

Panel B/oc/_ in the Pare_ital ControL_ menu and choosing L_zblocle.

Unplug the TV fi)r two minutes and then plug it back in. Turn the TV on and tW again.

TV turns off while playing

Sch_'duh'd off functkm may have I)_'_,n activated. Go to p. 44 fi_r instructkms.

Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn the TV on again. If

this happens frequently, the voltage in your house may be abnormally high or low.

TV turns on unexpectedly

Sch_'dul_'d On or _ratch from the GUIDE Plus+ system may have" b_'_'n activat_'d. Go to page" 26 or 44 fi_r instructkms.

Blank screen

Make" sur__the" compon_'nt conn_'ct_'d to the TV is turn_d on.

"I'W anoth_q" chann_'l.

When I turn on the TV an icon is moving on the screen

Make" sure you have" rem_v_'d the I)emo Pin fiom the (3 LINK iack on the" back of your 'I'V_

No sound, picture okay

Maybe" sound is muted. Pr_'ss the votum_" up button to r_'stor_" sound.

Can't select certain channel

Chann_'t may I)_"block_'d or not approv_'d in the" Paretltal (]o_troLs m_,nu.

If tlsilag a VCR, mak+" sur+" the TViVCR button on the VCR is in th+" corr+'ct moct_" (pr+'ss the TViVCR button on your VCI,').

Noisy stereo reception

The, station might b_"w_'ak.

46

Troubleshooting

No picture, no sound but TV is on

Mtybe the cabk'/air s_,tting is set to tlw wrong position. Select S_gtlal T_,pefrom the Channel m_'nu. (3() to page 44 fl)r more

infl_rmatk)n.

Tim channel might be empty change channels.

If you're watching your VCR and it's connected with coaxial cable to the CABLE/ANTENNA jack, tune the ['V to channel 3 or 4

(whichever channel is se|ected on the 3/4 switch on the back of your VCR). Also check to make sure the TV/VCR button on the

VCR is in the correct mode (press the TV/VCR button on your VCR).

Sound okay, picture poor

Check ant_,nna c(mnections. Make sure all of tlw cables are firmly connected to tlw jacks.

Try ad}usting sharpness function to improve weak signals. Go to page 42 fl_r more instructions.

Black box appears on the screen

Clos_'d captioning iTtight be on. Check the (]losed(]aptiotl Z)i,_pl_O' control pan_q in the 5creetz ITt_qlU. (3() to page 43 fl_r ITtOr{_

inst FklCtions.

Every time I turn on the TV, the Guide is on the screen

The GLIDE Plus+ system automatically appears on tlw scre_,n when you us_' tlw POWEh' button on the' remote to turn on tlw ['VL

You can turn off this feature by pressing GUIDE on your remote control and then s_qect the Menu bar. Press the right arrow button

to s_qect Setup Choose Rez,ieu options and s_qect OFt_

GUIDE Plus+ System Problems

GUIDE Plus+ setup won't switch to channel 9 for VCR and/or channel 02 cable box

Make sure you have removed tlw I)emo Pin from the G LINK jack. Check to se_, if the G LINK wands are positk_n_,d correctly in

front of COl]lpOll_'nts' I'(_l]1ot_ _ s(_nsors.

GUIDE Plus+ system control of cable box is slower than direct control of the box itself. Keep this in mind when changing channels.

You may have an incorrect GUIDE Plus+ Channel Lineup. ['be guide may get out of sync with tim cable provider. Use tim G_71)E

lqus+ Setup in the GbIDE lqus+/v/e_lu to change the zip code to 99999. Furn the ['V off for 10 minutes. Use Setup again to change

the zip code back to the correct value. If asked, be sure to select the correct channel lineup flom the on screen list.

Program information doesn't download

Revi_,w your s_,tup infl)rmatk)n and make sure its correct. Press MEN[} on the remote and s_qect G'Ull)tJl'hts+ 5etz@. Go to page 16

for detailed instructions about tlw GUII)E Plus+ Setup menus.

The TV must I)_" off to download infl_rmatk_n. Leave your TV off overnight for at h'ast 10 hours, to receive the initial download for

your ar(_a.

If yourc using a cable box leave it on so you can n'ccive program infl_rmatk_n.

(Continued on next page)

47

Scheduled Watch or Record doesn't occur

Check Schedule for tim_'r conflicts. Go to page 26 for instmctk)ns.

M_lke sure the wJnds of the G LINK cable are pl_lced in fiont of the remote sensor(s) on the component(s).

Make sure your VCR is turned off during tim time you've scheduled to record a program because the system turns the VCR on when

it starts recording (if it's already on when recording starts, the system will turn it off).

Make sure there is a tape in the VCR and that tim VCR is connected properly.

Be sure tlmt you set up the VCR in the GblI)E Plus+ Setz@ menus If you don't complete tim (2ot_fii_uHngf_)r a VCK steps

successf_flly, the Record option won't be available. Go to p. 18 for detailed instructions.

If a cable box is attached to your TV_ make sure you set it up correctly in the GUII)tJI'hts+ &,tuff menus. Go to page 16 17 for

detailed instructions.

The Remote Control Doesn't Work

Something might be between the remote and the remote sensor on the component. Make sure there is a clear path.

Maybe the remote isn't aimed directly at the component (['V or VCR) that you're nTing to operate.

Maybe batteries in remote are weak, dead or installed incorrectly. Put new batteries in the remote.

You might need to drain the remote's microprocessor: remove batteries and press the number 1 button fi)r at least 60 seconds.

Release the 1 button, replace the batteries, and (if necessa W) program the remote again.

Problems with V-Chip/Parental Controls

The rating limits don't work

You must lock the settings. Go to the TI'MAL_ MEN[ (press MENU on your remote) s_,lect Pare_ital Controls (press 0 on your

remote), select Lock Parental C'otltrols (press 6 on your remote).

I don't remember my password and I want to unlock the TV

If you forget your pJssword simultaneously press Jnd hold MEN[ on the television _md volume down on the remote fi_r 3 seconds.

Nothing _pp_'ars on the" scre_,n Parent_I Controls simply unlock and you can re enter J pnssword vi_ l.ocle ]'are_ztal (2o_ztroL_:

The V=Chip won't let me watch a program even though it's not rated as violent.

Mnybe the movie' w_s giv_'n an NR (Not Rated) stJtus. After you block movie ratings you must s_.t NR to View s_.parJtely in orch'r to

vh'w movies with an NR rating.

48

Care and Cleaning

CAUTION: Turn OFF your TV before cleaning.

You can clean the TV as required, using a snff lint-flee cloth. Be sure to occasionally dust the ventilation slots in the cabinet

to help assure adequate ventilation.

The TV's screen may be cleaned with asoft, lint-free cloth as well. Take care not to scratch or mar the screen. If

necessary, you may use a cloth dampened with warm water.

Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder. These types of cleaners

will damage the TV.

While cleaning do not spray liquid directly on the screen, or allow liquid to run down the screen and inside the TV. Also,

avoid placing drinks or vases with water on top of the TV. This could increase the risk of fire or shock hazard or damage to

the TV.

Caution: If fixed (non-moving) images are lefi on the screen ff)r long periods, they may be permanently imprinted on the

picture tube. Such images include network logos, phone numbers, and video games. This damage is not covered by your

warran/y. Extended viewing of channels displaying these images should be avoided.

RCA TV Limited Warranty

What your warranty covers:

• Defects in materials or wnrknmnship.

For how long after your pahmse:

• 90 days flcom date of purchase t_)r labor charges.

• One year l_com date of purchase l_)r parts.

• Two years t_om date of purchase t_r the picture tubes.

The warranly period liar rental units begins with the first rental or 45 days from date of shipment to the rental firm,

whichever comes first.

What we will do:

• Pay any Authorized RCA Television Service Center the labor charges to repair your television.

• Pay any Authorized RCA Television Service Center t2)r the new or, at our option, refurbished replacement parts and

picture tube required to repair your television.

How you get service:

• For screen sizes of 26" and smaller: Take your RCA television to any Authorized RCA "Iblevisinn Service Center and

pick tip when repairs are complete.

• For screen sizes larger than 26": Request home or pick up, repair, and return service t_cnmany Authorized RCA

"l_,levisinn Service Center, provided that your television is located within the geographic territory covered by an

Authorized RCA "I_,levisinn Service Center. If not, you nmst take your television to the Service Center location at your

own expense, or pay t2)r the cost the Service Center may charge to transport your television to and I_comyour home.

•"lk_identit) your nearest Authorized RCA Televisinn Service Center, ask your dealer, look in the Yellow Pages, or call

1-800-336-1900.

• Proof of purchase in the tkmn of a bill of sale or receipted invoice which is evidence that the product is within the

warran/y period must be presented to obtain warranty service. For rental firms, proof of first rental is also required.

(Continued on next page)

49

What your warranty does not cover:

• Customer instruction. (Your Owner's Manual clearly describes how to install, adjust, and nperate ynur television. Any

additional inlkmnation should be obtained flcom your dealer).

• Installation and relat(*d adjustments.

• Signal receptinn problems not caused by your television.

• Damage from misuse or neglect.

• Batteries.

• Cuslon'ter replacement l'tlses.

• Images burned nntn tile screen.

• A television that has been modified or incorporat_*d into other products or is used tk)r institutional or other commercial

purposes.

• A television purchased or serviced outside tile U.S.A.

• Acts of nature, such as but not limited to lightning damage.

Product registration:

• Please complete and mail the Product Registration Card packed with your TV. It will make it easier lo contact you

should it ever be necessary. The return of tile card is not required tk)r warran/y coverage.

Limitation of Wrranty:

• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION

GIVEN BY THOMSON MULTIMEDIA INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY

WAY INCREASE THE SCOPE OF THIS WARRANTY.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE

CONSUMER. THOMSON MULTIMEDIA INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS

OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY

ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY

APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE

ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.

How state law _lates to this warranty:

• Some states do not allow tile exclusion nor limitation of incidental or consequential danmges, or limitations on how

long an implied warranty lasts, so tile above limitations or exclusions may not apply to you.

• This warranty gives you specific legal rights, and you also may have other rights that vary from stal_* to stal_*.

If you puehased your television outside the United States:

• This warranty dnes not apply. Contact your dealer t_)r warran/y information.

Service calls which do not involve defective materials or workmanel'liptamovea_l by this warranty. Costs of

such service calls to'the sole _rsponsibility of the llnlmaser

5O

VH81(340

VH82 (6-ft)

Screw-on Cable rcHacbes to

_lc Fo1d!_d gltll_ntla

conneclor._ (called ZS-obm

F-Opt,) on the, back c_vour

VCR or TV 7be emts screu

onto tbe colmec[omJbr a

S{_CL_IZ" co*lll{_cIio!l

VH89 (640

Push-on Cable al[acbes

[o [be rotttld antem_a

connec[or._ (called 75-

ohm l:-O_)e) on [ke bnck

*f your VCR or TV EmLv

push onjbr a quick

COtl_7ec[[ot2

Gold-Tipped cable

VH83 (640

Monaural VCR Dubbing

Cable Double cable [tint leLs

}'o_ co_!lect tbe L_[eo at_d

audio _cks _tu_) VHS

VCRs 1o duplica_ tapes¸

Can also _ used to connect

aVCR toyour 7_ (._b_ is

cok)_coded and sb_lded.

Has RCA-O_ pbono plugs

o_l each e_d

Stereo VCR Dubbing Cable

Triph, cabl_, that lets/'(m

COtlllec[ [k( _ _71)1:0 £tt_d AI )lO

Gold-Tipped cable

VH84 (640

Continued on next page .......

o

u

o

r_

Accessory Order Form

Description

Screw-on antenna cable (3-ft)

Screw-on antenna cable (6-ft) VH82

Push-on antenna cable (6-ft) VH89

Monaural VCR Dubbing Cable (6-ft) VH83

Stereo VCR Dubbing Cable (6-ft) VH84

2-way Signal Splitter VH47

Amplified Antenna ANT200

Antenna Mixer (not shown) 193984

Remote Control (CRK17TA1) 242778

Audio,Video Adapter (not shown) 228449

$5.95

$5.9s

SsI9s

$9.95

$3.95

$49.95

$11.15

$19.35

$4.45

Prices are subject to change without notice.

Total Merchandise ............................................. $__

Sales Tax ............................................................. $

We are required by law to collect the

appropriate sales tax for each individual

state, country, and locality to which the

merchandise is being sent.

Shipping and Handling ..................................... $ 5_0

Total Amount Enclosed ..................................... $-_

Use VISA, MasterCard, or Discover Card

preferably.

Money order or check must be in U.S.

currency only.

No COD or CASH.

All accessories are subject to availability.

Where applicable, we will ship a superseding model.

51

Charge your order on your VlSA,

Master( ard, or Discover Card by

filling in below

USE YOUR CREDIT CARD

IMPORTANT: (opy complete account number

f}-om your VISA card

VISA

r-N-N r-NN r-NN r-NN

M,cal'doxpire :I--f--II--f--I

IMPORTANT: (opy complete account number

f}-om your Master( ard

FTTT-] FTT-F-]FTT-F-]FTTT-]

(opy Number

above your

name Oll

Master( ard

My card F--[-_ F--[-_

expires:

IMPORTANT: (opy COlnplete account number

t?om your Discover (ard

FTTT-] FTT-F-]FTT-F-]FTTT-]

My card expires: _ FT-]

AUTHORIZED SIGNATURE

(Credit card order will not be processed without signature)

Print o1"type your name and

address clearly. A complete and correct

order will save you days

of waiting.

Name:

Street:

City:

Apt:

State: Zip:

Daytime phone number:

Please make sure that both sides of this form

have been filled out completely.

• Allow 4 weeks for delivery,

• All accessories are subject to availability,

• Prices are subject to change,

2-way Signal Splitter

Help._ you connect a second "I'_

or V(;/_.

Splitter VH47

Amplified Antenna

Alhmt_ I'ou to quickly switch

./komthe anlenna signal Io Ibe

cable or salellile siqnal withoul

d[SCOHt_C[_H_ tbC glt_[_HHa

ANT200

,5,o 6

_0 _D_O

_o ,5

v_..J

CRK17TAI

Remote Control

7}M_ is the remole conlrol Ibat

came paca, ed wftll )'our 7"K

Replacements orspare._can be

ordered glS t_t_{_gl_'d

To Order

To place your order by phone, have your Visa,

MaswrCard or Discover Card ready and call the loll-Dee

number listed below.

Use this number only to place an order llar accessory

items listed on this order torm.

1-800-338-0376

To place your order by mail, detach and mail the

completed order lk>rmwith credit card intk>rmation,

money order or check in US currency (made payable to

Thomson multimedia Inc.) to the tk_llowing address:

0

.-r

Q

Video Accessories

PO Box 8419

Ronks, PA 17573

52

Index

A

Accessories 51

Advanced connections 11

Age Based Ratings 30

Arrow buttons 20

Audio

Menu 42

Processor 42

Auto

Channel Search 15, 44

Color 42

B

Basic

connections 8, 9

Picture Controls 42

Batteries for the remote 14

Black Level 42

Block

Age Based Ratings 33

Channel 37

Front Panel 37

Movie Ratings 36

Specific Content Themes 34

V Chip I nrated Program 37

Buttons, remote control 20

C

CABLE/ANTENNA jack

8,9,11

Cables

coaxial 7

G LINK 7

CC (Closed Captioning) 43

CH+ button 20

CH button 20

Channel

Banner 30

Block 37

Labels 44

Lineup 22

Menu 44

Search 15

Channels menu 28

CLEAR button 20

Closed Caption

I)isplay 43

Mode 43

Coaxial cable 7

Color WanTtth 42

CoI]I]ectioi1s

multiple 11

FV + VCR 8

FV Only 9

Content Themes 30

Contrast 42

Control Panels 40

D

I)emo Pin 6, 8, 9, 11

F

Finding the sensor 13

Fixed hnages 49

Front panel

block 37

buttons 12

G

G LINK

cable 8

connecting 13

wands 13

GO BACK button 20

Grid Guide menu 23

GUIDE button 20

GUIDE Plus+ system 22

Channel Lineup 22

Downk)ading Infbrmation

22

setup 15

INFO button 20

INPUI" button 20

Interactive setup 15

L

Labels 44

Language 43

Languages

Selecting 15

Locating remote sensor 13

Lock, Parental Controls 38

M

Memory 44

Menu

Acidic) 42

Channel 44

Channels 28

Grid Guide 23

Language 43

Messages 27

News 26

Picture Quality 42

Schedule 26

Screen 43

Setup 28

Sort 25

Time 44

MENU button 20

Menus

GLIDE Plus+ system setup 15

Messages menu 27

Mono 42

Mute 42

MI}TE button 20

N

News IT1eI]u 26

Normal List 44

Number buttons 20

O

OK button 20

p

Parental Controls

Locking, Unk)cking 38

menu 30

Picture

Presets 42

Quality Menu 42

POWER button 20

R

Rating Limits

movies 35

TV 32

Remote, batteries 14

Remote control buttons 20

Remote sensor 13

S

SAP 42

Satellite Receiver connecting 11

Schedule 44

menu 26

Screen Menu 43

Second Audio Program (SAP) 42

Set ['ime 44

Setup

GLIDE Plus+ system menus 15

menu 28

Sharpness 42

Signal Type

Cable ['V 44

UHFiVHF Antenna 44

SKIP button 20

Sleep Timer 30, 44

Sort menu 25

Stere() 42

T

Fime Menu 44

Fint 42

I'roubleshooting 46

TV; connecting 9

U

UHFiVHF Antenna 44

linlock, Parental Controls 38

V

V Chip

Age Based Ratings 31

Blocking Movies 35

Content I'fiemes 31

VCR, connecting 8

VOL+ button 20

VOL button 20

W

Warranty 49

(This page intentionally left blank)

(This page intentionally left blank)

(This page intentionally left blank)

(This page intentionally left blank)

(This page intentionally left blank)

(This page intentionally left blank)

(This page intentionally left blank)

(This page intentionally left blank)

Visit the RCA web site at www.rca.com

Please do not send any products to the indianapolis address listed in this manual or on the carton. This will only

add delays in service for your product.

Thomson multimedia Inc.

10330 North Meridian Street

Indianapolis, IN 46290

©2001 Thomson multimedia Inc.

Trademark(s)® Registered

Marca(s) Registrada(s)

Printed in USA

TOCOM 15814840

O

THOMSON

THOMSON _1;