RCA LED29B30RQ User Manual LCD TV Manuals And Guides 1405300L

User Manual: RCA LED29B30RQ LED29B30RQ RCA LCD TV - Manuals and Guides View the owners manual for your RCA LCD TV #LED29B30RQ. Home:Electronics Parts:Rca Parts:Rca LCD TV Manual

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

POSIBLES

Child

Safety

Caution
Part

No,:

RNO329R0104

FCC

Guide

and

Notice

Safety

...........................................................

Warning

......................................................

......................................................................

Precautions

Preparation

.........................................................

for Your

Check Accessories
Setup R/Table

New

TV .........................................

...........................................................

Stand ........................................................

Select 7V Location ............................................................
Connection

and Using ........................................................

TV Stand

Installation

TV Signal

Connection

Cable
Side

Connections
Panel

2
3

S
S

Congratulations on your purchase!
As you enjoy your new product, please keepthese
safetytips in mind:

.....................................................

.4
4

• Thehome thealerentedainmentexperience isa glowing trend and largerflat panel
displays are popular purchases However, flat panel displays are no_always
supported on the proper standsor installedaccording to themanufacturer's
_scommendaflons

.................................................

.4

• Flatpanel displays_hatare inappropriatelysituatedon dressers,bookcases,shelves,
desks,speakers,cheslsor cadsmay fall over and cause inury

Video device .................................

4

TOIS_00FACTU_

5

• Theconsumerelectronicsindustryis committedto makinghome entertainmenl
enioyable and safe

Connections

Connecthg

AV Composite

Connecting

YPbPr Component

Connecting

HDMI device ....................................................

device ...................................

Kinds of Input Sources .........................

5
5

CA_S_.

TUN_ |OTOSAFETY
• One size does NOT fff all Follow the manufacturer'srecommendationsforthe safe

TV Jacks

Explanation

Keypad

and

Front

Panel Buttorls

.....................................................
Panel

.................................................

..................................................................

Front Panel ......................................................................
Remote

Control

Instructions

filserting Batteries

_@ede_Humbe_
LED29B','30RQ

in the Rernote ..........................................

Remote Control Reception
Learning

about

Setup

Basic

Operations

Turnhg

Please keep your
the serial number

at www,rca,com

sales receipt and keep the
and the date of purchase

receive warranty
parts and service.
The serial number
is located at the

record of
in order to

back of the

TV.

6

....................................

.....................................................

7

.7

Selecting Input Source .......................................................

7

Channel Bar .....................................................................

7

Volume ..............................................................

Menu

Program Guide) ...........................................

Operations

....................................................

7
8

8

Picture Menu ...................................................................

8

Sound Menu ....................................................................

8

Channel Menu .................................................................

9

Parental Menu .................................................................

9

Asked

V-Chip

Questions

(FAQs)

...........................

............................................................

Rating

Explanations

.........................................

12

USB

Media

Product
Warranty

Play .............................................................

Specification
Card

...................................................

................................................................

MONTAJE

DE PARED: SI USTED

MONITOR

DE PANTALLA

DECIDE

A MONTAR

PLANA A LA PARED,

SU

SIEMPRE:

° Use una montura que se ha recomendado par el fabricante de monitor y/o
listado par un laboratorio independiente (coma UL, CSA, ETL).
Siga todas los instrucciones ofrecidas par el fabricante de monitor y
montaje de pared.

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.

Si usted tiene cuatquier duda sabre su habilidad para instalar seguramente
su monitor de pantalla plana, contacte a su distribuidor para la instalaci6n
profesionaL
• Compruebe que la pared adonde se est_ montando el monitor es adecuada_
Atgunos montajes de Ia pared no son dise_ados para ser montados a paredes
con tachones de acero o la vieja construcci_n de btoque de ceniza. Si usted
est_ inseguro, contacte a un instalador profesionaI.

- Consult the dealer or an experienced

WALLMOUNTIOG:IF YOUDEODE
TOWALLMOUNT
YOURFLAT
PANEL
DISPLAY,
ALWAYS:
• Use a mountthat has been recommendedby the display manufacturerand/or
listedby an independentlabolatory {suchas UL,CSA, ElL)
• Follow all instructionssuppliedby the display and wall mountmanufacturers

www.CE.org/safety

• If you have any doubts aboutyour ability to safelyinstallyour flal panel display,
contact your _etailerabout professionalinstallation
• Make surethat the wall where you are mountingthe display isappropriate Some
wall mountsare not designed to be mountedto walls with steelstudsor old cinder
block construction Ifyou are unsure,contact a professionalinstaller
• A minimumof two people are _equired_orinstallation Flat panel displays
can be heavy

CAUTION

Caution: To reduce the risk of electric shock, do not
remove cover or back. No user-serviceable
parts inside.
Refer servicing to qualified service personnel.

www.CE.org/safety

18

14

iMuchas gracias par su usa del presente producto!
Cuando usted disfruta de su nuevo producto, par
favor tenga en cuenta los consejos de segundad:

for help.

1.

Read these instructions.

2.
3.
4.
5.

Keep these instructions.
Heed all wamings.
Follow all instructions.
Do not use this apparatus near water. For example, do not use
near a laundry tub, in a wet basement, or near a swimming pool,
and the like.

6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions. Slots and openings in the cabinet back
or bottom are provided for ventilation, to ensure reliable operation
of the TV and to protect it from overheating. These openings must
not be blocked or covered. The openings should never be blocked
by placing the TV on a bed, sofa, rug, or other similar surface.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type
plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When _
cart is used, use caution when moving the
cart/apparatus
combination to avoid injury from
tip-over. A TV and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the TV and cart
combination to overturn.

.,_1_

13. Unplug this apparatus during lightning storms or when unused for
long periods of time. For added protection for this TV receiver
during a lightning storm, or when it is left unused for long periods
of time, unplug it from the wall outlet and disconnect antenna or
cable system. This will prevent damage to the TV due to lightning
and power line surges.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such

.18

.13

radio/TV technician

Par Io menos dos personas se req@erenpara la instala¢i6n. Los monitores
de pantalta plana puede ser pesados.

11

12

................................

on a "larger thanlife" flat panel display Care shouldbe taken tu place or install
the display where il canno_be pushed, pulled over, or knockeddown
• Care should be lakento ro@eall cords and cables conneded b the flat panel
display so that they cannot be pulled or grabbed by curiouschildren

" Recuerde que los hi,as pueden Ilegar a ser excitados al vet una programaci6n,
especialmente en el monitor de pantallapiano "m&sgrande que vida'.Et cuidado
se tiene que empezar par poner o instalar el monitor donde no se
puede empujar, detener al costado del camino ni echar abajo.
El cuidado se tiene que empezar per encaminar todos los cordones y cables
conectados al monitor de pantaila piano para que no se puedan tirar o agarrar
per los nffios curiosos.

.12

Canadian French Rating System .........................................
Specification

This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio Communications.
However, there is no Guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:

10

12

Unit

FCC Information

• Lea con cuidado y entienda todas las instruc¢iones adjuntas para el usa
propio de este producto.
No permita a los nil_os a subir aI equipo o jugar con muebles y televisiones.

.11

Canadian English Rating System .........................................

Mounting

AJUSTAR
HASTA SEGURIDAD
• Un ramada fijo NO es adecuado para todos. Siga los recomendaciones de
fabdcante para la instalaci6n segura y el usa de su monitor de pantalla piano.

10

US V-Chip Rathg System ..................................................

Wall

ns_allaiionand useof your flat panel display
• Carefully read and understandall enclosedinstruclionsfor proper useof this
pradud
• Don't allow childrento climb on or play with furnitureand _elevisionsets
• Don't place flat panel displays on _urni_ure
that can easily be usedas steps,suchas
a chestof drawers
• Rememberfloatchildrencan becomeexcited while watching a program,especially

8

Adjust the OSD Screen ......................................................

Troubleshooting

for Today.
www.rca.com

7

.............................................................

Others Menu ..................................................................

Made

@

7

Frequently

Date of Purchase/ Fecha de la compra

@

Control

Setup Menu ...................................................................

Serial Number/ Ndmero de serie de TV

6

Orl arid Off ............................................................

OSD

product

6

6

......................................................................

EPG (Electronic

your

@

Choosing TV Channel ........................................................

Adjusting

Please register

6

Angle ..........................................

Remote

Rernote Control Buttorls
Initial

..........................................

5

DO NOT

CAUTION:
CHANGES OR MODIFICATIONS
NOT EXPRESSLY APPROVED
BY THE PARTY RESPONSIBLE
FOR COMPLIANCE
WITH THE
FCC RULES COULD AVOID THE USERS AUTHORITY
TO
OPERATE THIS EQUIPMENT.

. No claque los monitores de pantalla plana en el muebte que se puede usar
f&cilmente coma escal6n, as[ coma una c6moda.

S
S

WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

j AL FABRICANTE
LE IMPORTA!
" Laindustda electr6nica del consurnidor esta comprornetida a hacer el
entretenimiento de casa agradable y seguro.

2

.......................................................

..........................................................

How to Obtain Various

1
2

8

PROBLEMEAS

. La expegencia de entretenimiento de cine en casa es una tendencia
creciente y los grandes monitores de pantalla piano son muy populares. Sin
embargo, los monitores de pantafla pJanano se han instatado siempre enlos
soportes adecuados o instatadode acuerdo con las recomendacionesdefabdcante.
" Los monitores de pantalla piano que se ban instalado inadecuadamente en
tocadores, estanterias, estantes, escritorios, oradores, baQle s o carros se
pueden caer ycausar et dal_ocorporal

2

as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus,
the appratus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
15. This TV should be operated
only from the type of power supply
indicated on the rating label. If customer is not sure the type of
power supply in your home, consult your appliance
dealer or local
power company. For TV remote control battery power, refer to the
operating instructions.
16. The TV set shall not be exposed to dripping or splashing. No
objects filled with liquids, such as vases, shall be placed on the TV
set.

Before Turning On TV
Check Accessories
Check

the

accessories

that

are packed

with

i_

1

18. Unplug the TV from the wall outlet before cleaning. Do not use
liquid or aero cleaners. Use a damp cloth for cleaning.
19. This TV should never be placed near or over a radiator or heat
resource. This TV should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.

i ....

24. To reduce the risk of electric shock, the grounding of center pin of
plug must be maintained.
25. If an outside antenna or cable system is connected to the TV, be
sure the antenna or cable system is grounded to provide some
protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code, ANSI/NFPA NO.70,
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge
unit, size of grounding conductors,
location of
antenna discharge
unit, connection
to grounding electrodes,
and
requirements
for the grounding electrodes.
(See figure A)

USER'S

(NEC

EQUIPMENT

ELECTRODE
(NEC
ART

QUICK

START GUIDE

PATENT

;
CARD

Select rv Location
Select a fiat, stable table to place your TV set. Please follow the Safety
Instructions when placing the TV.
Connection
and Using
After placing your TV properly, you can connect the TV with power
supply and cable components. For further information, see page 4 to
page 5.

CLAMP

UNIT
810

Note." Above accessories

are subject to change without notice.

2O)

CONDUCTORS

SECTION

810

21)

SYSTEM
25O, PARTH)

TV LED29B30RQ is packaged with the TV stand separated from the
cabinet. To setup the TV table stand, please carry out the installation
according to the instructions below.

Figure A

Safety

GUIDE

Setup TV Table Stand
Please refer to TV Stand Installation guide in next page to carry out
stand installing.

ANTENNA
LEAD
IN
W_RE

GROUNDING

SCREWS
M4xl0mm,
4pcs
Pa_# RS01PM410H

M4x12mm,
4pcs
SCREWS
Pa_#RS0tPWA412HT

20. Do not place this TV on an unstable cart, stand, tripod, bracket, or
table. The TV may fall, causing serious injury to someone, and
serious damage to the appliance.
21. Do not attempt to service this TV by yourself because
opening or
removing covers may expose you to dangerous high voltage or
other hazards. Refer all servicing to qualified service personnel.
22. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference
that may cause
undesired operation.
23. WARNING: To prevent injury, this apparatus
must be securely
attached to the floor/wall in accordance with the installation
instructions.

ANTENNA
DISCHARGE
(NEC
SECTION

TV.

PART NO.: RE20QPd0

17. Never push objects of any kind into this TV through openings as
they may touch dangerous voltage or other electrical parts that
could result in fire or electric shock. Never spill liquid of any kind
into the TV.

GROUND

your

Strap

Caution: Pushing, pulling or climbing on the TV may cause the TV
falling. Do not let chlidren climb or hang on the TV. Always place the TV
on a sturdy, level, stable surface that can hold the weight of TV. And if
possible, secure the TV according to the instruction below (Note: The
fastening components
such as screws are not supplied with TV).

Step

One

Place the TV faced down on a soft cloth or cushion to prevent the LED
LCD panel from being damaged.
The LED LCD panel can be
scratched easily, so please:
1. Choose an absolutely flat
surface to place the TV on.
2. Use soft cloth or cushion to
face the TV panel.
Do not put TV on the table

Step one: Insert the M6 mounting screws into the upper two wall
mounting screw holes and fasten them (Figure B).
Step two: Insert anchors to wall and connect the bolts and anchors
with ropes or chains (Figure C).

directly.
s unplug the AC cord first
when installing/removing
the stand.

M6 Screws
Step
Figure

B

Figure

O

3

Two

Take the neck. Please align the screw holes of the neck and the TV, and
then insert the 4 screws into the 4 holes on the neck and tighten them.

See the below

COMPOSITE
UAUDiO-R

Video/Audio cable

u
u
u
u
u
Take the base.
Please
of the neck,
insert
the
and

tighten

align
base

four holes of the
to the neck,
and

base
then

and four
insert
the

Audio Cable
Go to page

screwholes
4 screws

COMPONENTY, Pb, Pr
L-AUDIO-R

them.

volume.

Connecting YPbPr Component device
(Better Video Quality)

u
u
u
u
u
u
u
u
u

5

To connect a component device, such as a DVD player, follow these
steps:
1.Connect the COMPONENT IN Y/Pb/Pr jack on the side of TV to the
video output jacks of device via video cable (green, blue and red).
2.Connect the L-AUDIO-R jacks on the side of TV to the audio
output jacks of device via audio cable.
Notice the left channel jack and plugs are white and the right channel
jack and plugs are red.

Keypad

The back of TV
The output panel
of HDMI device

Buttons

If you cannot locate your remote, you can use the keypad buttons
your TV to operate many TV features.

on

Component

HDM[

Video Connection

The picture below is an example of a connection
video jack.

cable

using the component

The bot_orn view of the TV
(Front cabinet faces down)

!_

Unplug

o P=====_

the AC cord when you connect

Multimedia
Interface
of HDMt Licensing LL C
other

devices

The output panel of
other AV device

to TV.

Longer side

How to Obtain Various Kinds of Input
Sources
The back of TV

The first step in connecting your TV is obtaining the signal. Your TV
LED29B30RQ has a back panel, which allows you to receive analog
and/or digital television channels via ANT/CABLE jack.
Before connecting your TV, determine using an antenna or a cable
service to obtain the signal.

After connection is done, press INPUT button on remote control or TV
top panel to choose the input source you need. See page 7, Basic
Operation of TV.

INPUT:
Displays the Source Select List.
MENU: Displays the TV Main Menu.
CHA: Scans up through the channel list. In the TV menu system, it acts
like the up arrow on the remote control and can be used to select
menu options.
CHv: Scans down through the channel list. In the TV menu system,
it acts like the down arrow on the remote control and can be used to
select menu options.
VOL+: Increases the volume. In the TV menu system, it acts like the
right arrow on the remote control and can be used to select menu
options.
VOL=: Decreases the volume. In the TV menu system, it acts like the
left arrow on the remote control and can be used to select menu
options.
POWER

Connecting AV Composite device
(Good Video Quality)

B. Cable

TV service

Connect the cable TV wall jack to TV via coaxial cable on
ANT/CABLE jack of the back panel. You are ready to receive
off-air local digital and analog channels.
C. Set-Top

Note: A V si'./nal bdongn !o corepo
has rrrg' liar g,aod dssp/ay qu_:>ls/y.

Box

If you use a set-top box, you may need to call your cable company
or satellite service provider, which use a special connection, please
refer to the user's guide of set-top box.
Note: Do not plug the AC cord
aft the connections.

Composite

Video

(_}:

HEAD PHONE: Connect a 3.Smm headphone for
personal audio.
USB: Connect your USB storage device to enjoy music/
photo files on your TV. (Also used for service purpose).
HDMII/DVl,
2= (High-Definition Multimedia Interface)
It provides an uncompressed digital connection that
carries both video and audio data by way of an integrated
minFpklg cable.
COMPONENT
Y/Pb/Pr:
Connect a device that has
component video jacks, such as a DVD player. To access
device connected to the Y/Pb/Pr jack, press the INPUT
button on your remote; then press the up/down arrow to
select Component. Press the ENTER button at last to
confirm.

The output panel of other device

Connecting HDMI device
(Best Video Quality)

The picture below is an example of a connection using the
composite video jack.

until you have accomplished
Cable Tv' Antenrla

To connect a HDMI device, such as a DVD player, please Connect the
HDMI1/DVI, 2 jack on the side of TV to the output jacks of device via
HDMI cable.

AC
100-120V
60Hz

To connect a DV[ device, via DV[ port of PC or Device and HDM[
jack of TV:
1. Connect the HDM[1/DV[ jack on the side of TV to the DV[ port of
PC via HDMPDV[ cable.

Y/Pb/Pr (Component
Video): They provide good
picture quality because the video signal is separated into
three components. Use three video-grade or component
video cables for the connection. When using Y/Pb/Pr,
make sure you connect left and right audio cables to the
AUDIO IN R/L jacks.
L-AUDIO-R,
COMPOSITE: Connect an AV device that has composite
video jacks, such as a VCR or a DVD player. To access device connected
to these jacks, press the INPUT button on your remote; then press the
up/down arrow to select AV. Press the ENTER button at last to confirm.
• AUDIO IN L= Left audio channel connection. The left audio

2. Connect the L-AUD[O-R jack on the side of TV to the audio
output jack of computer with audio cable (dual-channel RCA jacks
to 3.5mm stereo jack or the L-AUD[O-R jack).
The back of TV
AC Power Cord
(Connect after all the other connections

t&:4e: 1. HDMI (Hk2h dh.'finihon M llg_neds_ Intr.,n_occ,.)is a compact
a ldn_/vid_._oieterffrce for transmithr!g urlcorrlpre'¢sed d#)_#.'al
cl:_/a, ff
r;,grrles !lie atJd_'oaed vJfJeo si(_eal via /be s,srne e,sbk_aed has/he [:x:'¢t
@splay qua/,'ty.
2. t/DMI.DVI cable traesfers only #idso signal £om DVI pert of
DW device to HlYvII jack of 7V_ /:;ar aud,'o signal, pl_'.#se coenect aadlo
o /tp /l /o L-AUIDIO.Rjnck
oe TV back p_,ne/.

are done.)

Choose "four Connections
TV LED29B30RQ

supports

various

connections

connector is usually white. For mono audio sources,
left AUDIO INPUT.

to other devices
the table to

4

Tuning To Analog Channels
An analog channel has a channel number beginning with "A". Input the
digital number with numeric buttons directly and press ENTER button
to confirm.
For example, to watch analog channel "A51", press "5", "1", "ENTER"
on remote control in sequence.
Note: Altho lgh fflere is eo analog 71/sirjnal av#ilab/e in America, we
reserve A7Y faectioes for some expansible use.

they are oct _;*v#ih:@h3

The output panel of other device

The picture below is an example of a connection
jack.

using the HDMI video

5

Indicator: Light up in red when the TV is in standby
when the TV is on.
Sensor: Remote control IR sensor, which receives
by remote control.

_tro, S,
Power/Standby

.....
indicator

I

Inserting Batteries in the Remote
•
•
•

Remove the cover of battery cabin on the back of the remote control
by lifting the cover.
Insert two AAA batteries, making sure the polarities (+ and _) are
aligned correctly.
Place the cover back.

Remote Control Buttons
MUTE (1_): Reduces the TV volume to its
minimum level.

control

does

not work,

check these points:

• Are the polarities (% -) correct?
• Are the batteries worn out?
• Is there an AC power failure?
• Is the power cord plugged in?
• Is there any interference or block near the remote control sensor?

You can use OH/'-

button to increase channel number

Press INPUT button on remote control to
display Source Select list.
Use up/down arrows to highlight the source
you need and press ENTER to confirm.

Channel Bar
Press the DISPLAY button on the remote control, the channel bar will
appear on the top right corner of the screen. It displays the current
channel's information. The following list describes the items on the
channel bar.

the initial setup, the TV will search channels

ATV
A2/D50-1

What to notice:

MTV/KOCE-HD

1. The channel search access starts from the Analog TV channel
searching and ends at Digital TV channel searching.
2. The channels that have been found will be stored automatically.
3. You can press MENU button to skip analog/digital channel
searching.
4. You can press ENTER/EXIT button to end the channel searching.

Mono/English

MENU: Accesses the Main Menu, or return to
the upper level of a sub-menu.
FREEZE: Freeze the current screen frame,

Turning On and Off

press again to return to normal.
DISPLAY: Displays the Channel Bar (see
page 7).
EXIT: Exits the current menu or function.
VOL+ or VOL-: Increases or decreases the TV

Connect the AC cord to power the LED LCD TV. At this time the TV
will enter standby mode and power indicator will turn red. Use Power
button (_3) on the top panel of TV or on the remote control to turn on
the TV. After switching off the TV for 5 seconds, you can turn on TV
again.

Remote

control

part

RE20QPa0

number

to

Selecting input Source

"=": To enter a digital channel with a subchannel, enter the main channel; then, press
this button to enter the sub-channel and press
ENTER.
Recall (¢_3): Returns to the previous channel.
EPG: Shows Electronic Program Guide (see
page 8).
INPUT: Accesses the available input channels
(TV, AV, Component, HDMI 1/2, Media). Use
the arrows to highlight options, and press
ENTER to select.

and CHv

decrease channel number. When no OSD (On Screen Display) is used,
the up/down arrows can also work as OH-"-/OH v buttons.

Step Two
Please select the TV installation mode, press
the up/down arrow select the mode you
need: Home, Retail. If you select Home
mode, the next option is step three. If you
select Retail mode, please refer the step four.

Step Five
If you accomplish
automatically.

Arrows (_1 / _-/,_/V):
Uses the four arrows
to highlight different items in the TV menu or
change the value. The up/down arrow
work as CH^/CHv
button, and the left/right
arrow can also work as VOL-/VOL+ button.
ENTER: Enter and confirm button.
If the remote

Changing Channels Directly

Step One
Please select Menu Language, press the
up/down arrow select the language you
need. Available languages: English, Spanish
and French.

Step Four
To choose your TV tuner signal type, press the up/down arrow select
the signal type: Air, Cable.
Note: please select TV signal type according to the antenna or cable
closed circuit TV you use.

Press again to restore the volume.
POWER (d) }: Turns the TV on or off.
CH.MST: Displays the channel list.
FAV.: Adds the current channel to your
favorite list, or erases the current channel from
your favorite list (if this channel is a favorite
channel already).
FAV.+ or FAV.= : Scans up or down through
the current favorite channel list.
Numeric Buttons: Use these buttons to enter
numbers.

[

A digital channel has a channel number beginning with "D". Input the
main digital number with numeric buttons directly, then press " _"
button on remote control, and input the sub number at last.
For example, to watch analog channel "D31-1 ", press "3", "1", "_ "
"1", "ENTER" on remote control in sequence.

Step Three
Please choose between Energy Saving and
Dynamic mode. You can save more energy
with Energy Saving.

distance and angle, see the right side.

be sure to use the

• AUDIO IN R: Right audio channel connection. The right audio
connector is usually red.
ANT/CABLE:
Connect to receive the signal from your antenna or cable
via coaxial cable.
Digital Audio out= Connect a coaxial cable for digital audio output.

HDMI Connection

(such as DVD, VCR, Setrtop box, etc.). Please follow
choose the cables which adapt to your device.

Codes for DIRECTV: 0178, 10178
,, Codes for Time Warner Cable: 0178, 10178
o Codes for Cox Communications:
0178
• Codes for Comcast: 10178
Codes for Dish Network: 627

Turns the TV on and off.

Power/Standby
mode. Light out
Remote Control
infrared ray sent

ibe vS4r_.o.7bh kied of vi@._o i?enl

Connection

For Universal Remote Control brands listed below, please use ac
companying codes and refer to your Universal Remote Control User
Manual for basic Instruction for changing TV code to operate the TV
model.

Front Panel

Composite connector will be shared with Component Y connector.
To connect a composite AV device, such as a DVD player, follow these
steps:
1.Connect the COMPOSITE jack on the side of TV to the video output
jacks of device via video cable (yellow).
2.Connect the L-AUDIO-R jacks on the side of TV to the audio
output jacks of device via audio cable.
Notice the left channel jack and plugs are white and the right
channel jack and plugs are red.

Connect the antenna to TV via coaxial cable on ANT/CABLE jack
of the back panel. You are ready to receive air local digital and
analog channels.

Universal Remote Control Code List

o Codes for Fios Verizon: 0205, 0057, 0493, 0775

About remote control working
A. Antenna

Choosing TV Channel

If it is the first time you turn on your TV, or you have done Clear
Channel List option (see page 10), the initial setup menu appears
automatically.

20 feet

Caution:

Please take note of the base direction:

NO7 E : Tho krtysnot If_tl_.d _;v-efor DVD control
for ttli_ 7V too@.#.

and angle range shown

/

PC

cable

Note:
HDMt, the HDMt logo, and High-Definition
are trademarks
or registered
trademarks

Use your remote control within the distance
below.

Used batteries should be recycled.
Keep out of children's reach.
DO NOT use new and old batteries together.
Change both the batteries at the same time.
When not using the remote control for a long time, remove the
batteries from the unit.

Tuning To Digital Channels

Go to page 5

HDM[ 1/DV[, 2

Remote Control Reception Angle

OH^or
Oily: Scans up or down through the current channel list.
Press once to change the channel up or down; press and hold to
continue changing channels.
PICTURE: Switches between the preset picture mode (see page 8).
SOUND: Switches between the preset sound mode (see page 8).
SLEEP: Selects the sleep timer, after which the TV will shut off
automatically.
ASPECT: Switches between the preset screen size mode (see page 8).
CO: Selects the closed caption.
MTS: Selects the multi-channel television sound.

•
•
•
•
•

Note: Y/Pb/Ar hcks are corr_poneel video. 77£skind of video sk2nal has
belier dhplay qu hly,

COMPONENT video cable

HDMPDVI

CAUTION:

480i/1080i

DTV
If the channel is analog, A is displayed. If it's a
digital channel, D is displayed. For example, in the
pictures above, A2 is an analog channel, and
D50-1 is a digital channel ( -1 is a sub-channel
number).
Displays the channel label.
Displays whether the current channel is being
broadcasted in stereo or mono. If the current
channel is digital, this space will be SAP (Second
Audio Program) language.
Displays the signal resolution.

16:9/CC/TV-PG

Displays the screen aspect ratio, closed caption
and TV rating level of the current program or
channel. These are only available for digital
channels.

Oct-31 23:14 Mon

Displays current date and time.

Adjusting Volume

7

Press the VOL+/VOU button on the remote control to adjust the
volume. If you want to switch sound off, press MUTE (1_). When OSD
(On Screen Display) is not used, the arrows lefVright can also work as
VOU/VOL+ buttons.

_,
•
•
•

EPG (Electronic Program Guide)
Press EPG button on the remote control, the electronic program guide
will appear in the center of screen. The electronic program guide gives
the TV program playing project. You can use left/right arrows to switch
pages.

•

Brightness: Adjust the brightness of picture.
Contrast: Adjust the contrast of color.
Color: Adjust the richness of color.
Tint: Adjust the balance between red and green level (only
available in NTSC signal).
Sharpness: Adjust the sharpness level of picture.

Screen Size
Screen Size: Select a screen aspect ratio. (Available ratio: Wide,
Cinema, Zoom, and Normal.) Please choose the ratio that applies
to your video signal format best.

Color Temperature
This option allows you to select one of three automatic color
adjustments: Cool for a bluer palette of picture colors; Normal or
Warm for a redder palette of color.
Advanced

Adjust the OSD Screen
The OSD (On Screen Display) menu enables you to approach
functions.

Picture

Block
Block

Menu, you need to enter password to unlock the menu function.
Please enter your four-digit password with numeric keys 0~9.
Nele: 77_eork/Tleal password is "O00fY.
_, After unlocking, the items in parental control menu can be used.
Use arrow up/down to highlight the function you need and press
ENTER or right arrow to use V-chip, Change Password, Keypad
Lock and Soume Lock,
Clear Channel List sub-menu.

Press the left or right arrow to select the frequency (100Hz, 250Hz,
500Hz, 1KHz, 2KHz, 4KHz, 10KHz) you want to adjust. Use the
up or down arrow to adjust.

Channel Menu
The Channel Menu enables you to search, view and edit channels. It is
available in TV mode only. Press MENU and choose CHANNEL from
the Main menu. Press the ENTER/down button to proceed to
CHANNEL menu.

Press ENTER or right arrow to enter V-chip sub-menu,
follow:

Show

Activate

Digital Caption Type

program.
Rating,

or downloadable

Change

Password

Change

the password

Clear

Downloadable

rating data.

of parental

PIN: Input the new password.

Confirm:

Input the new password

Press left/right arrow to go to digital closed caption style sub-menu,
to select the closed caption style.

Remote

Select the item you want to adjust in Digital CO Style menu with
up/down arrows.
After changing, you can preview the caption style in the bottom.

Lock

Source

Menu Language
To choose your menu language, press the lefVright arrow until the
language you need appears.
Available languages: English, French and Spanish.

Lock

This option allows you to lock or unlock the input source. The
source blocked can not be chosen from input list unless you input
the correct parental password.
Use up/down
unlock it.

Press ENTER or right arrow to enter US V-Chip ratings menu,
which contains two sub-menus: Movie Rating and TV rating. See
next page for more details.

Use up/down to choose the function you need, press ENTER or right
arrow to adjust or enter a sub-menu. Thesub-menu image and
explanation are shown below.

Movie

Channel List

Favorite

List

Displays a favorite
favorite channels.

channel

list. It shows the current

arrow to select the source, press ENTER to lock or

Video Style

This option allows you to execute Clear Channel List function. This
function will reset the whole TV system to factory default (not only
reset OSD menu).

If you connect the HDMI/DVl port of PC to HDMI jack of the TV
and the video signal is 1080p, please choose the compatible video
style: Video, Graphic.

Setup Menu

Rating

use arrow keys to select the rating level you want to block, press
ENTER to IocWunlock the rating level. If you have blocked a lower
level rating, the higher ratings will be blocked too.
For example, when PG- 13 is blocked, R, NO-17 and X will be
blocked at the same time.

Displays a channel list. It shows the current channels.

Menu Transparency
To choose your menu transparency mode, press the leff/right
arrow until the transparency you need appears: Off, Low, MedkJm,
High.

Clear Channel List

US V-Chip

similar with Movie Rating. After adjusting,
press EXIT to exit the menu.

Clock

The Setup Menu lets you config the TV with your preferences. Select
SETUP from the Main Menu. Press ENTER/down button to proceed to
SETUP menu.

The Picture Menu contains menus and controls to configure the way
the picture appears. The Picture Menu options apply to the video for
the main TV and VIDEO INPUT selections. All picture options can be
applied to each input.

Use up/down to choose the function you need, press ENTER or right
arrow to adjust or enter a sub-menu. Thesub-menu image and
explanation are shown below.

Press MENU on the remote. Select Picture from the Main menu. Press
button to proceed to PICTURE menu.

Sound Settings

Press up/down

press MENU to return or

E_mm

Skip: Set if the current channel is skipped.
Favorite: Set if the current channel is the favorite channel.
Label: Enter a channel label to rename the current channel.

Signal Type

TV-MA

Mature Audience

TV-14
TV-PG

D

Sexually Explicit Dialogue

Parents Strongly Cautioned

L

Adult Language

Parents Guidance Suggested

S

Sexual Situations

TV-G

General Audience

V

Violence

Sound Mode: Choose the preset sound mode of your TV:
Standard, Soft, User, Dynamic. Only in User mode you can
adjust Bass, Treble, Balance.
_, Bass: Adjust the bass component of TV sound.
• Treble: Adjust the treble component of TV sound.
_, Balance: Adjust the balance between the left and right channel.

Auto Channel Search
Execute an auto channel search (see page 7).

TV-Y7

Directed to Children 7
Years and Older

FV

Fantasy Violence

TV-Y

All Children

Parental

Menu

For more rating

Mode

Creates a 3D sound surround

from standard

stereo material, with

deep and rich enhancement.

The Setup Menu enables you to lock program with special content,
panel key board and input source. Press MENU and choose
PARENTAL from the Main menu. Press the ENTER/down button to

explanation,

Select your time zone: Eastern, Central, Mountain,
Hawaii, Samoa, Newfoundland, Atlantic.

Use up/down to choose the function you need, press ENTER or
right arrow to adjust or enter a sub-menu. The sub-menu image
and explanation are shown below.

Select auto clock on/off. Auto clock helps you synchronize
time to standard time (from DTV signal).

12.

Setup Time
Set your TV time manually (needs to turn off auto clock).

Press ENTER or right arrow to enter US V-Chip ratings menu,
which contains two sub-menus: English Rating and French Rating.

Day of Week
Displays what day it is (can't be adjusted,

Auto Volume
English

Set auto volume control on/off.

If available, use the text at the bottom

Picture

Daylight Saving Time
Set your daylight saving time on or off (needs to turn on auto clock).

Select analog TV audio sound type: Stereo, Mono or SAP (only
available in TV mode).

Use arrow keys to select the rating level you want to block, press
ENTER to IocWunlock the rating level. If you have blocked a lower
level rating, the higher ratings will be blocked too.

Digital Sound

For example, when PG is blocked,
the same time.

To set the initial settings.

Sound

of each screen for help.

Setdngs

Picture Mode: Choose the preset visual mode of your TV:
Standard, Movie, User, Dynamic, Power Saving. (Only in User
mode you can adjust Brightness, Contrast, Color, Tint and
Sharpness. Changes to Power Saving mode can decrease the
power consumption.)

8

Rating

Press ENTER or right arrow to enter English rating menu.

Analog

Use up/down to choose the function you need, press ENTER or right
arrow to adjust or enter a sub-menu. The sub-menu image and
explanation are shown below.

displays only).

Caption Display

Select digital TV audio language type: English, French or Spanish
(only available for DTV channel).

French

Digital Audio Output

Press ENTER or right arrow to enter French rating menu.
Similar with English Rating.
Note: fbeee ratff_gs ate available only ff file broadcestet i_ send/nq

Set the audio output type as Off, PCM or Raw. Please set this
option according to your power amplifier.

Initial Setup Wizard

14+ and 18+ will be blocked at

9

Rating

I-,qtlr!gff_fotTr_ahoe.

Press leff/right

arrow to select caption display on or off.

Analog Caption Type
Press left/right arrow to select analog closed caption type: OO1,
002,003,
004, TEXT1, TEXT2, TEXT3, TEXT4.

Others

(see page 7)

Menu

The Others Menu lets you config the TV with your preferences in other
features. Choose OTHERS from the Main Menu. Press ENTER/down
button to proceed to SETUP menu.

1-0

Why does channel search find a lot of channels,
but when I try to tune to them, there's nothing
there?
Some channels don't carry programming, such as video On Demand.
When channels are unavailable, your TV screen is blank or appears like
snow. You probably want to remove these channels from your channel
list. Remove these in the Channel List Menu. Go to page 9 for more
information.

Why does it take a long time when I search the
channels at first time?

Press ENTER button to select "No Signal Power Off" on or off. If it
is turned on, the TV will shut off after 10-minute no signal time. We
suggeet you turn on this function when Blue Back is turned on. It
may hurt the LED LCD panel if blue screen is on for too long.
Note: In PC mode, the monitor standby and power off settings
depend on the No Signal Off time.

If you have both analog and digital channels, the TV is looking for all
available channels in the channel list. If you do have digital channels,
the TV is also searching for scrambled channels, non-ecrambled
channels, and each sub-channel of that digital channel.

No Operation

Power Off

reset to TV system. All the settings

Identifying

TV Problems

Press ENTER button to activate audio only mode. The TV will
output only sound and the panel will be turned off. To restore
normal playing, hold POWER button for three seconds.

The

and color are referred to the actual

Connect an antenna to the TV Input jack to view free local digital
channels. You may need to purchase an antenna. (See page 4 for
more information about antenna setup).
Visit vwvw.antennaweb.org
for assistance in deciding what type of
antenna to use to receive the local digital channels available to you.
After entering your location, this mapping program tells you which local
analog and digital stations are available using a certain antenna.

Are there other ways to view High Definition
(HD) video?
Besides using an antenna as mentioned above, you can also use a
set-top box to receive digital video. Contact your cable service provider
or satellite provider to purchase digital programming
and have them
connect the box to ensure you are viewing channels in the best way.

How do I tell an analog channel
channel?

from

a digital

Press the DISPLAY button to display the Channel Bar. Look at the top
right corner of the screen. An "A" is displayed for an analog channel.
A "D" is displayed for a digital channel.
Note: Since the analog TV in America has been cut off, we reserve
analog TV function only for some unexpected use.

TV can't

be turned

on.

_, Make sure the AC cord is plugged in.
_, Check the wall outlet, make sure the AC output works normally and
stably.
• The side panel may be locked (disabled). Use the remote control to
turn on the TV.
_, Select the Keypad Lock function in the PARENTAL Menu and press
ENTER to uncheck the locking status.
There

way to view High

Problems

If there are any problems when using the product, please consult the
list below. If the list does not solve the problem, call our Customer
Service Center immediately.

Audio Only

What's the most convenient
Definition (HD) video?
your TV

and can I get

No Signal Power Off

Pacific, Alaska,

Auto Clock

Canada V-Chip

proceed to PARENTAL menu.

when there is

Time Zone

Closed Caption
see page

is turned on, the TV will display a blue background
no signal input.

Note: The OSD's appearance
appliance.

Select your TV signal type: Air or Cable.

•

Surround

Only

Press ENTER button to select Blue Back on or off. If the Blue Back

Press ENTER button to execute
will be reset to factory default.

TV Rating Overview

arrow to switch the channel you want to

Blue Back

All Reset

Go to channel setting sub-menu.
Channel:
edit.

Use up/down to choose the function you need, press ENTER or right
arrow to adjust or enter a sub-menu. The sub-menu image and
explanation are shown below.

Press ENTER button to select "No Operation Power Off" on or off.
If it is turned on, the TV will shut off after a 3-hour no operation
time.

TV Rating

Channel Settings

Picture Menu

Digital CC Style

again to confirm.

_, Noise Reduction: Set noise reduction as Off/low/Medium/High.
_, MPEG Noise Reduction: Set MPEG noise reduction as Off/low/

repeatedly until the menus disappear.

Press left/right arrow to select digital closed caption preset: Default,
Custom. Only in custom mode you can adjust the digital closed
caption style.

Old PiN: Input the old password.

Keypad

The Sound Menu lets you adjust audio output. To access the Sound
Menu, press MENU on the remote, and then select SOUND from the
Main Menu. Press ENTER/down button to proceed to SOUND menu.

Digital CO Preset

menu.

bars on my screen,

Most digital video is sent in a 16/9 format which fills your screen, but is
sometimes sent in 4/3 which does not fill your screen. It depends on
how the station or device connected to your TV is formatting the video.
If there are bars on the screen,
press the ASPECT button to try a different format that may eliminate
the bars. Some bars can't be removed because of the way the format
is sent by the broadcaster. The format changes as you press the
ASPECT button and the format type is displayed at the bottom of the
screen. For more information on screen size, go to page 8.

Data

if available.

Select this option to block or unblock the TV's side panel buttons
so that they can't be used.

Sound Menu

Why are there
rid of them?

Press left/right arrow to select digital closed caption type: Service1,
Service2, Service3, Service4, Service5, Service6.

Select your Remote: Off, Remote1 or Remote2. This is for special
purpose.

Settings

To exit the OSD menu:
_, Press the EXIT button. The menu will clear from the screen.

the ENTER/down

the detail as

Unrated

all the unrated

DownBoadable

New

V-Chip

Mediumor High.
Note: Noise reduction helps to reduce the picture "static" or
any type of interference. This feature is especially useful for
providing a clearer picture in weak analog signal conditions.
The MPEG Noise Reduction specifically works on video signal
with MPEG coding.

Press the up and down arrow to move to a different option within each
menu. If necessary, press ENTER or right arrow to display the choices
of the option you've highlighted. If available, use the text at the bottom
of each screen for help. To return to the previous menu, press the
MENU button.

Press the MENU button

Lock Parental Control
_' When the Parental Control Menu is accessed from the Main

• Dynamic Contrast: Set dynamic contrast Off/low/Medium/High.
_, Film Mode: Set film mode on/off.

to the TV

To use OSD menu system, press MENU button on remote control,
then use lefVright arrow to highlight an option from PICTURE, SOUND,
CHANNEL, PARENTAL, SETUP or OTHERS and press ENTER/down
button.

_,

Equalizer Settings
The seven-band graphic equalizer allows you to adjust the audio
frequency settings. You can select one of the equalizer presets
(Off, Pop, Rock, Jazz) or create your own personal preset (User).

is no picture

or sound

but

the

TV is on and

there

is a "No Signal"
sign on screen.
_, Are you trying to use an input source with no device connected to
it? For using other video/audio device, make sure the external
device works normally first, then press INPUT and choose the right
input source.
• The Signal Type option may be set incorrectly. Go to page 9 for
detailed instructions.
_, The channel may be blank. Try to search the channel again or
change another channel.
The sound
is fine,
but the picture
is poor.
_, If you can only get black and white pictures from external device
that you've connected to your TV, maybe it is due to the video
cables is not connected well, or they are connected wrongly.
Check the connection stability first, then check the correctness. For
AV input, the yellow video cable connects to the yellow Video In
jack on the side of your TV. For Component input, the three Y, Pb,
Pr video cables (red, blue, and green) should be connect to the
corresponding
input jacks on the side of your TV.
_, Check the antenna connections. Make sure all of the cables are
firmly connected to the TV jack on side of your TV.
_, Try adjusting the color features to improve.
There
is no sound,
but the picture
is fine.
_, The sound might be muted. Try pressing the MUTE button
restore sound.
_, For using AV or Component,

remember

to

to connect the device's

left

and
right
audio
output
correctly.
The
left
channel
cable
iswhite
and
the
right
channel
cable
isred.
Please
match
the
cables
and
jacks
according
totheir
colors.
• The
sound
settings
may
not
beset
correctly.
Go
topage
8for
more
information.
• Ifyour
audio
source
has
only
one
jack
orisa(mono)
audio
source,US V-Chip Rating System
make
sure
you
have
plugged
the
connection
into
the
Audio
InL
jack
(white)
onthe
TV.
TV-MA (Mature Audience Only): Specifically designed to be viewed
by adults and may be unsuitable for children under 17. It contains one
Thebuttons
ontheside
panel
don't
work.
or more of the following content themes: crude indecent language (L),
• The
side
panel
may
be
locked
(disabled).
Use
the
r
emote
control
to
explicit sexual activity (S), or graphic violence 6/).
turn
onthe
TV.
(Parents Strongly Cautioned):
Contains some material that
• Select
the
Keypad
Lock
function
inthe
PARENTAL
Menu
and
pressTV-14
many parents would find unsuitable for children under 14. Parents are
ENTER
touncheck
the
locking
status.
strongly urged to exercise greater care in monitoring this program and
• Unplug
the
TV
from
the
AC
power
for10minutes
and
then
plug
it are cautioned against letting children under the age of 14 watch
back.
Turn
the
TV
onand
tryagain.
unattended. This program contains one or more of the following
content themes: intensely suggestive dialogue (D), strong coarse
language (L), intense sexual situations (S), or intense violence 6/).
The
TVturns
offunexpectedly.
• The
electronic
protection
circuit
may
have
been
activated
because
(Parental Guidance Suggested) : Contains material that
ofapower
surge.
Wait
30seconds
and
then
turn
the
TV
onagain.TV-PG
parents may find unsuitable for younger children. Many parents may
Ifthis
happens
frequently,
the
voltage
inyour
house
may
be
want to watch it with their younger children. The program contains one
abnormal.
Ifthe
oather
electronic
equipment
inyour
home
can't
workor more of the following content themes: some suggestive dialogue (D),
normally,
consult
qualified
service
personnel.

16+ (Viewer 16 and over): Programming is not suitable for those
under age 16. This program contains frequent scenes of violence or
intensely violent scenes.

Storage

Operating

13+ (Viewer 13 and over): Programming may not be suitable for
children under the age of 13. This program either contains several
violent scenes or one or more scenes that are violent enough to affect
them. Viewing in the company of an adult is therefore strongly
recommended for children under the age of 13.

or theme, intended for adult audiences.

Other Content Guidelines:

With USB Media Play, you can enjoy music and photo files stored in a
USB storage device on your RCA TV.

Connecting

8+ (Viewer 8 and over): Not recommended for young children. This
program is suitable for most audiences, but it contains mild or
occasional violence that could upset young children. Viewing in the
company of an adult is therefore recommended for young children
(under the age of 8) who do not distinguish between reality and
imagination.

Violence Guidelines: Violence will not be portrayed as the preferred,
acceptable, or only way to resolve conflict or encourage children to
imitate dangerous acts which they may see on television. Any realistic
depictions of violence will be infrequent, discreet, of low intensity and
will show the consequences
of the acts. Other Content Guidelines:
There will be no profanity, nudity or sexual content.

You are experiencing problems with V-Chip/Parental
Controls.
• If the rating limitsdon't work, you must lock the settings. Go to the
Main Menu (pressMENU on your remote), select PARENTALto
check the settings.
What

else

can

C (Children): Programming intended for children under age of 8.
Violence Guidelines: Careful attention is paid to themes which could
threaten children's sense of security and well being. There will be no
realistic scenes of violence. Depictions of aggressive behavior will be
infrequent and limited to portrayals that are clearly imaginary, comedic
or unrealistic in nature. Other Content Guidelines: There will be no

I do?

If you've been through the Troubleshooting section and nothing has
fixed your problem, try rebooting your TV. Note that after a reboot, you
may need to run your TV through the setup process again. To reboot,
unplug the power cord from the wall outlet or power strip. Keep your
TV unplugged for about 5 minutes. Then plug in the TV and turn it on.
See if the problem is fixed. If the problem remains, then please visit the
Customer Support Menu at www.rca.com
or updated FAQs or contact
RCA Customer Support at the support number provided in your
Warranty card.

offensive language,

nudity or sexual content.

Canadian French V-Chip Rating System

12

18+ (Adult): Programming is for adults only. This program contains
sustained violence or extremely violent scenes.

a USB storage

Power

Supply
RF input

Humidity:

than 85%

Less than

AC 100-120V,

60Hz

Cable/Antenr/a

x 1

AVx

device
Connection

• Comect a USB storage device to the USB port in the back of the TV.
• Press "INPUT" and select "Media".

Video

input

RH

80% RH

AVx

input

Audio

output

rhode
With

Dimensions

480i,

stand

Without

480p,

Weight

x 1, Digital Audio

Out x 1

720p,

1080i

® inability to receive a signal due to problems
by the product.

VESA 200 x 100

M6 screws,

length 12mm J

sold with

Made
for Today.
www=rca=com

Commercial

JPG/JPEG

•

Music

•

USB Storage

®

File System

files

Do not set up the wall mount by yourself. Please contact qualified
professionals for installation.
2. The TV should not be mounted on walls or surfaces which have an

FAT32

Coverage

Caution:

angle more than 10 degrees with vertical direction. Otherwise the
TV set may fall.
The walls for mounting must have enough strength to hold the
whole weight of TV set. For example, concrete wall and brickwork
are eligible. Do not place the mount on soft walls such as earth
walls and plasterboard.
If spare parts of different specifications (such as screws) are used
during mounting, consult with qualified professionals to make sure
these parts are safe and effective.
Before attaching the base to wall, ensure the holes for anchors are
in keeping with the installing rules. Otherwise there may exist some
potential problems.
Do not place any heating source under your television. Or else, it
can cause fire.

For a period of 12 months from date of purchase of your RCA
product, we will pay an authorized RCA service center for the
new,or at our option, refurbished replacement parts needed to
repair any defects in material or workmanship
in your television.
if your television is unrepairable we will provide you with a
refurbished unit of the same or better model.

USB flash drive
format

- Parts

Do not turn off the TV or disconnect USB storage device while the TV
is playing back picture or music. This may result in loss of data or
damage to the USB storage device, and RCA is not responsible for any
damage to, or loss of, data on the USB storage device.

- LED

LCD

Panel

For a period of 12 months from date of purchase of your RCA
product, we will pay an authorized RCA service center for the
new, or at our option, refurbished LED LCD panel needed to
repair any defects in material or workmanship
in your television.
if your television is unrepairable we will provide you with a
refurbished unit of the same or better model.
How

to Obtain

Service

+ For assistance (U.S.A) - if you purchased
U.S.A, please call 1-888-977-6722.
Or visit www.rca.corn

Diagonal Dispby Size

7.

Do not place the TV near anything dripping. Transducers and high
voltage wires should be kept far away from the apparatus too. Or
else, it may cause creepage, electric shock or bad resonance.
8. Do not place TV in a location where collision or vibration is liable to
happen.
9. In order to avoid unexpected falling of the TV set, do not put any
strong force on TV or wall mount after installing.
10. Be sure to unplug the TV before installing. Keep anything hard or
sharp away from the screen panel to prevent the scuffing.
11. After installing, if there is any need to move the cabinet, please
contact the qualified professionals.

[Mexico service
ATSC/NTSC

UHF: 14-69

Coverage
CATV:

1-135

Storage
-20'(

Temperatur÷

-+60"C

0_C -+50"C

13'

RCA product in

I Recambios

servicio de RCA para un reernptazar ya sea con partes
nuevas o reacondicionadas,
o a nuestra opci6n, para reparar
cualquier defecto del material o rnano de obra en el televisor.
Si su televisor es irreparable que le proporcionara
una unidad
reacondicionada
del rnisrno rnodelo o superior.
de

Cobertura=LED

fuera del pals

C6mo

Obtener

IZACION

IMPLIED (INCLUDING
ALL IMPLIED WARRANTIES
OF
MERCHANTABILITY
OR FITNESS FOR A PARTICULAR
PURPOSE). NO VERBAL OR WRITTEN INFORMATION
GIVEN BY ON CORP US, INC., ITS AGENTS, INDEPENDENT
CONTRACTORS,
SALES REPRESENTATIVES,
EMPLOYEES,
RETAIL DEALERS, WHOLE SALE DISTRIBUTORS
OR ANY
OTHER THIRD PARTY SHALL CREATE A GUARANTY OR
INCREASE. EXPAND OR MODIFY THE SCOPE OF THIS
LIMITED WARRANTY.

OR

REPLACEMENT
OF THE PRODUCT. ON CORP US, INC.
SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR
CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE
OF THEP RODUCT OR ARISING OUT OF A BREACH
EXPRESSED OR IMPLIED WARRANTY ON THIS PRODUCT.

PERIOD(S)

O IDONEIDAD

PARA

UN PROPOS_TO

comerciantes
minoristas,
mayoristas
o cualquier otro tercero
DEBER_,N crear una garant[a ni aumentar. Ampliar o
modificar el alcance de esta garant{a limitada.
Esta
GARANTiA
UMITADA
DEL UNiCO Y EXCLUStVO
REMEDIO
PARA EL CONSUM_DOR
DE REPARACION
O REEMPLAZO

un

DEL PRODUCTO.

EN CORP

EE.UU.,

_nc. no serb_

responsable
por daSos especiales,
incidentaies
o
consecuentes
resuitantes
DEL USO DEL PRODUCTO

RCA en

O

DERIVADOS
DE UNA WOLACiON
garant_a expresa o
impl[cita de este producto.
ESTA GARANTiA
LiM_TADA

Y

RESPONSABIUDADES
contenida en 61 se rige por las Leyes
del Es[ado de _ndiana. SALVOPROH_BIDO
POR LA LEY

(Centro de Servicio en M6xico)
Servicios Computacionales de M_xico, S.A. de C.V.
Francisco Diaz Covarrubias # 33, Ciudad Satelite
C.P. 53100, Naucalpan, Mexico
El representante de Servicio revisarA sus opciones para el
servicio. Para su cornodidad le ofrecernos tres formas de
obtener servicio de garantia. Usted puede enviar su producto

APLiCABLE,
CUALQUIER
GARANT[A
COMERC_AUZAC_ON
O IDONE_DAD
PROPOSiTO
PARTICULAR
ESTAR_,

_MPLiC_TA DE
PARA UN
LIMITADA A UM_TADA

pedodo de garanfia (S) mencionado
anteriormente.
Esta
garant_a le otorga derechos legales especfficos y USTED
TAMBIEN
PUEDE TENER OTROS DERECHOS,
QUE PUEDEN VAR_AR DE ESTADO.
a

la direcci6n proporcionada
por el representante
de servicio,
usted puede Itevar su producto a un centro de servicio
autorizado, o puede solicitar en el servicio a dornicilio
(adrninistrador
deterrninara si e! producto se encuentre en
funcionarniento
en casa o debe ser llevado de vuelta a servicio

RCA es una marca
de ON Corporation

local tecnico para su reparaci6n). El representante del Servicio
le proporcionara
las instrucciones
para el servicio preferido. Se
requiere del cornprobante de cornpra original. S61o se lea data
servicio a Dornicilio a Televisores de 37 " pulgadas de tarnaSo
y rnas grandes.

ON Corp US, Inc.
10920 Via Frontera,

PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED
WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A
PARTICULAR PURPOSE
IS LIMITED TO APPLICABLE
WARRANTY

utHizados
utflizados

PARTICULAR).
NO informaci6n verbal o escrita por parte
CORP DE EE.UU., _nc., sus agentes, contratistas
independientes,
representantes
de ventas, empleados,

Servicio

Para asistencia en M+xico: si cornpr6 un aparato
M+xico, favor de llarnar al:
01-800-823-3858,
o visite: www.rca.corn

OR

THIS LIMITED WARRANTY
PROVIDES THE SOLE AND
EXCLUSIVE REMEDY FOR THE CONSUMER
OF REPAIR

o superior.

Exciusi6n

CORP EE.UU., inc., el fabricante
de este producto, rechaza
cualquier otra garant[a, expresada
o implicada (iNCLUYENDO
TODAS LAS GARANTiAS
_MPL[CITAS DE COMERClAL

servicio de RCA para un reernptazar la panta!la LED, ya sea
con pantalla nueva o reacondicionada,
o a nuestra opci6n,

rnodelo

Comercial

ESTA GARANTiA
UMITADA
ES EL 0NICO Y EXCLUSIVO
DE GARANTiA
APUCABLE
A ESTE PRODUCTO.
EN

LCD

Para asistencia en Estados Unidos (E.U.A) si cornpr6
aparato RCA en E.U.A. favor dellarnar al:
1-888-977-6722
o visite: www.rca.com

IS THE SOLE AND EXCLUSIVE
TO THIS PRODUCT. ON CORP

US, INC., THE MANUFACTURER
OF THIS PRODUCT,
DISCLAIMS ALL OTHER WARRANTIES,
EXPRESSED

LIMITED

center address]

Temperature

Servicios

Computacionales

Francisco

Diaz Covarrubias

C.P. 53100, Naucalpan,

is

(-4°F-+140T)

Temperature
Operating

servicios

registrada

de SAS bajo licencia

Ste 540

San Diego, CA 92127, U.S.A.
© 2013 ON Corporation

SET FORTH ABOVE.

system

VHF: 2-13
Channel

o prestar

Esta garant_a limitada s6lo se aplica a los productos
para uso personal o, y no cubre todos los productos
con tines institucionales,
comerciales o de alquiler.

para reparar cualquier defecto del material o rnano de obra
en la pantalla de su televisor. Si su televisor es irreparable
que le proporcionardt una unidad reacondicionada
del rnisrno

used for institutional,

in

TV standard

Television System

used for personal

THIS LIMITED WARRANTY AND THE DISCLAIMERS
CONTAINED
HEREIN ARE GOVERNED BY THE LAWS OF
THE STATE OF INDIANA. EXCEPT TO THE EXTENT

+ For assistance (Mexico) - if you purchased
Mexico, ptease call 01-800-8233858.
Or visit www.rca.corn

29 inches
American

RCA product

Uso

Durante un periodo de 12 rneses desde la fecha de cornpra
de su producto RCA, pagarernos un centro autorizado de

- Labor

files

MP3(8~320kbps)

o la sa{.

pero no fimitado a, da£los por rayos o inundaciones.
® Las Ilamadas de servicio que no impliquen
cualquier
defecto en materiales o mano de obra.

Durante un periodo de 12 rneses desde la fecha de cornpra
de su producto RCA, pagarernos a un centro autorizado de

PaneJ

only appties to products

THIS LIMITED WARRANTY
WARRANTY APPLICABLE

de 12 rneses desde la fecha de cornpra

but not limited to,

any defect in materials

use and does not cover any product
commercial or rental purposes.

Coverage

Cobertura

Use Excluded

This limited warranty

Media Support Specification

not caused

into other products.

® Service calls which do not involve
or workmanship.

For a period of t 2 months from date of purchase of your RCA
product, we will pay an authorized RCA service center the
labor charge to repair any defects in materials or workmanship

Photo

or incorporated

® Damage due to acts of nature, including
lightning damage or flooding.

un periodo

de su producto RCA, pagarernos a un centro autorizado de
servicio de RCA el cargo de rnano de obra para reparar
cualquier defecto en rnateriales o rnano de obra en el
televisor. Si su televisor es irreparable que le proporcionara
una unidad reacondicionada
del rnisrno rnodelo o superior.

® Damage to the product due to images burnt into the screen.
® Product purchased or serviced outside of Country of
Original Purchase. -i.e. Purchased USA can not be
serviced in Mexico/Purchased
in Mexico can not be
serviced in USA.
O Product modified

Coverage

•

1.

6.

to change

• Press arrow (_1/ _.) to select "Media Setting" and press "ENTER".
• In "Media Setting", you can set various options for Slideshow and
Music Playback.

Warnings:

5.

are subject

in your television.If your television is unrepairable we will
provide you with a refurbished unit of the same or better model.

B. We strongly suggest to set the wall mount with equipments of
specification we ordered. If not, inappropriate installing may cause
damage to device or people.
C. We suggest that you keep your TV at least 2.36 inches(60mm) from
the wall to prevent cable interference.

4.

design

for Slideshow and Music playback

television. We only provide the installing specifications but not the wall
mount itself. If you need the mount, please consult with the local dealer
for a VESA wall mount.

3.

and cabinet

• Press arrow (-_l/_) to select "Photo" and press "ENTER".
• The file or folder list will show up. Press arrow (A/V)
to select
a file or folder. Press "ENTER", and you will be given several
options to view photo files.
• You can directly open and playback the file. view thumbnails for
photo preview, or play slideshow.

Media setting

in the accessories

Specifications
notice.

Playing back Photo files

200 mm

Note:
A. The wall mount is not contained

less than 34W

Consumption

O Un-installation,
installation and adjustment of customer
controls and operating instruction.
• Batteries and customer replacement fuses.

13.0LBS (5.9KGS)

x 6.1 "D

10.8LBS (4.9KGS)

stand

Durante

O Damage due to misuse, abuse, negligence or neglect
including but, not limited to, damage resulting from
exposure to moisture, humidity or salt.

x 17.9"H

Without

Playing back Music flies

LED29B30RQ

stand

la humedad

o Productos modificados
o incorporados
a otros productos.
e DaSos debidos a fen6menos
de la naturateza,
incluyendo

Cobertura=Trabajo

stand
With

Notice:
without

en la pantalia.
® Productos comprados
de compra original.

x 1

26.3"W x 16.1"H x 3.3"D

26.3"W

a la humedad,

_ncapacidad para recibir la seSal debido a los problemas
que no son causadas
por e! producto.
DaSos en el producto debido alas im4genes de grabadas

Ej: Comprado
en Estados Unidos no puede prestar
servicios
en Mexico/Comprado
en Mexico no puede
prestar servicios en Estados Unidos.

1366 x 768

ComponenVHDMI

Power

Hecho
para
Hoyo _'_o_
www.rca.com
4++
_+++<_.*+

__

the time of service proof of purchase such as original receipt,
will be required. Only 37" LCD size and above are applicabtefor
in-home-service.

1

Headphone

Resolution

• Press arrow (,,4/ _-) to select "Music" and press "ENTER".
• The file or folder list will show up. Press arrow (_,/V)
to select a file
or folder. Press "ENTER" to playback the music file you selected.

de la exposJci6n
•

HDMI x 2
Audio

G (General Audience):
This program is suitable for audiences of all
ages. It contains no violence, or any violence that it does contain is
either minimal or is presented in a humorous manner, as a caricature
or in an unrealistic way.

authorized service center, or you may request in home service
(servicer will determine if product is serviceable in home or must
be taken back to local service center for repair). Service
representative
will supply instructions for preferred service. At

1

Component

Interface

• "USB Media Play" menu will appear.

May

contain graphic language and explicit portrayals of nudity and/or sex.
Ablack
box
appears
onthescreen.
14+ (Viewer 14 and over): Programming contains themes or contents
• Closed
captioning
might
beon.
Check
Closed
Caption
inthe
which may not be suitable for viewers under the age of 14. Parents are
SETUP
menu.
Go
topage
10for
more
instructions.
strongly cautioned to exercise discretion in permitting viewing by
pre-teens and early teens. Violence Guidelines: May contain intense
Problems
with
theHDMI
Connection.
scenes of violence. Could deal with mature themes and societal issues
• Make
sure
the
HDMI
device
(DVD,
video
gamer,
etc.)
isturned
on in a realistic fashion. Other Content Guidelines: May contain scenes of
and
the
cables
are
firmly
connected.
Ifproblems
still
occur,
turn
off nudity and/or sexual activity. There could be frequent use of profanity.
your
device
and
reconnect
it.Reset
the
power
byunplugging
the PG (Parental Guidance): Programming intended for a general
cord
and
plugging
itagain.
but which may not be suitable for younger children (under the
• power
Ifa"No
Signal"
message
appears
onscreen,
the
HDMI
device
isn't audience
age of 8). Parents may consider some content inappropriate for
responding.
Contact
the
m
anufacturer
of
t
he
H
DMI
device
for
unsupervised viewing by children aged 8-13. Violence Guidelines:
further
assistance.
Depictions of conflict and/or aggression will be limited and moderate;
• Ifyou
have
black
bars
oneach
side
ofyour
picture
(which
means may
include physical, fantasy, or supernatural violence. Other Content
the
TV
can
not
display
afull-screen
image),
the
device
you
Guidelines: May contain infrequent mild profanity, or mildly suggestive
connected
might
have
aswitch
oramenu
option
allowing
you
to language. Could also contain brief scenes of nudity.
change
the
picture
quality
output
that
will
fixthis.
Choose
either G (General Audience): Programming considered acceptable for all
720p
or1080i.
ages groups. While not designed specifically for children, it is
understood younger viewers may be part of the audience. Violence
TheRemote
control
doesn't
work.
Will contain very little violence, either physical or verbal or
• Something
might
beblocking
between
the
remote
control
and
the Guidelines:
emotional. Will be sensitive to themes which could frighten a younger
remote
sensor
onthe
front
panel
ofthe
TV.
Make
sure
there
isa
child, will not depict realistic scenes of violence which minimize or gloss
path.
over the effects of violent acts. Other Content Guidelines: There may be
• clear
The
remote
may
not
beaimed
directly
atthe
TV.
inoffensive slang, no rofanity and no nudity.
• The
batteries
inthe
remote
may
beweak,
dead,
orinstalled some
C8+ (Children 8 and older): Programming generally considered
incorrectly.
Put
new
batteries
inthe
remote.
acceptable for children 8 years and over to watch on their own.

Less

(No condens_ltion)

infrequent coarse language (L), some sexual situations (S), or moderate
violence 6/).

Can't
select
acertain
channel.
TV-G (Parental Audience):
Most parents would find this program
• The
channel
may
be
blocked
ornot
approved
inthe
PARENTAL
suitable for all ages. It contains little or no sexual dialogue (D) or
Menu.
situations (S), no strong language (L), and little or no violence 6/).
• The
channel
may
beskipped
inchannel
listinCHANNEL
Menu.
Check
the
blocking
and
skipping
status
ofchannel.
Canadian English V-Chip Rating System
18+ (Adult): Programming intended for adults 18 and older. It may
contain elements of violence, language, and sexual content which
The
stereo
sound
performance
isbad.
make it unsuitable for viewers under 18. Violence Guidelines:
• Itmay
be
weak
station.
Use
the
SOUND
Menu
and
set
Analog could
Sound
asaMono.
May contain violence integral to the development of the plot, character

Humidity:

(No condensation)
Humidity

is

(+32_Y-+122°P)

de M_xico,

S.A. de C.V.

# 33, Ciudad

Sat_lite

M_xico

The service representative
As a convenience
we offer
service. You may mail your
the service representative,

will review your options for service.
three ways to obtain warranty
product to the address provided by
you may take your product to an

THIS WARRANTY

GIVES YOU SPECIFIC

AND YOU ALSO MAY HAVE OTHER
FROM STATE TO STATE.

RCA is a trademark
SAS and used

under

of RCA Trademark
license

RCA is a trademark of RCA Trademark Management
SAS used under license to ON Corporation.

LEGAL RIGHTS

RIGHTS

THAT VARY
® Un-instalaci0n,
e instrucciones
Management

by ON Corporation

montaje y ajuste de oontroles
de funcionamiento.

de! oliente

RCA es una marcade RCA Trademark Management
SAS usada bajo licencia de ON Corporation.

® Las pflas y los fusibles de repuesto al cliente.
® Da¢_os por uso indebido, abuso, negligencia
o descuido
incluyendo pero no limitado a, los dacca derivados

15



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 4
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Fri May 30 07:01:57 2014
Author                          : 
Title                           : 
Subject                         : 

EXIF Metadata provided by EXIF.tools