RCA RT2770 QSG EN User Manual To The E89e86a4 B311 4ef5 990f 5c0966dc1f35
User Manual: RCA RT2770 to the manual
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
RT2770 QSG EN 6/3/07 5:19 PM Page 2 Remote Control QuickStartGuide 1 5 2 6 7 3 8 4 9 10 11 12 14 13 15 16 17 MEMORY MONO/ST Congratulations on purchasing your new RCA unit. Please read these instructions for quick tips on using the unit. TEST TONE Setting up 1. Connecting the Speakers NIGHT EQ / SURROUND • Six speakers are provided with the unit: • 2 front speakers • 1 center speaker • 2 rear speakers • 1 subwoofer. • Speaker wires are color-coded to match the terminals. • Connect the speaker wire to the corresponding color terminal as shown below. • Press down the tab to open the terminal, insert the wire and release the tab. • When connecting subwoofer, connect subwoofer control cable (red/black striped) at the back of the subwoofer to the subwoofer control jack on the unit’s rear panel, then press POWER ON/OFF on the subwoofer speaker to turn it on. Front Speakers SETUP Center Speaker Press DISTANCE Press / Right Press Left SUBWOOFER AUDIO OUT / Press TUNER - and TUNER + Green/grey or black striped Press MUTE Press SUBWOOFER White/grey or black striped 19 10. Adjust the speakers’ distance 11. Select among setting items in setup mode • Adjust the values when the display shows the setup you want to change • Tune down or up the radio frequency in AM/FM mode 12. Mute all sound 13. Select among subwoofer sound level (SOFT SUBWOOFER, BALANCE SUBWOOFER, STRONG SUBWOOFER and POWERFUL SUBWOOFER) 14. Adjust individual speaker volume. Refer to “Advanced Sound Control” for details 15. Adjust the volume 16. Select programmed stations in AM/FM mode or directly access the next or previous file in USB mode 17. Start, stop or pause playback (in USB mode only) • Start reverse or forward accelerated play(in USB mode only) • Access MP3/WMA ID3 information and current play time, current play folder and track number, play mode • Access the repeat function • Turn on/off random playback • Enter Intro mode 18. Enter sleep mode and selects sleep time 19.Select audio sources RT2770 www.rcaaudiovideo.com ON•OFF the Number buttons Red/grey or black striped 18 1. Turn on/off the unit Press 2. Directly access a preset station in Press AM/FM mode 3. Store station in AM/FM mode Press 4. Select between Stereo and Mono Press sound in FM mode 5. Test the loudness of the speakers. Press Refer to “Advanced Sound Control” for details 6. Select among night mode options Press (DRC OFF, SOFT and ON) which compresses the volume difference between normal voices and sounds such as explosions (Available only during Dolby digital signal playback) 7. Select among preset Press equalizer mode (FLAT, POP, JAZZ, ROCK, CLASSIC, BASS and TREBLE). • Adjust bass or treble level Press 8. Select among digital sound Press processor (STEREO, HALL, CHURCH, CLUB, STADIUM, STUDIO, 3 STEREO, DOLBY PL EMULATION, DOLBY PL II MUSIC and DOLBY PL II MOVIE) 9. Enter setup mode Press Press LEVEL Use this jack on the rear panel to connect another active subwoofer other than the one supplied. Press VOL + / VOL Press CH+ / CH- Press PLAY, STOP or PAUSE to access the relative functions. Press REV or FWD Purple/grey or black striped Press DISPLAY Press Press Press Press REPEAT RANDOM INTRO SLEEP Blue/grey or black striped Press SOURCE buttons Grey/black striped Subwoofer SUBWOOFER CONTROL Use this jack on the rear panel to connect to the subwoofer control cable (red/black striped) of the subwoofer. Right Left Rear speakers (Surround Sound) Tocom 56416640 (EN) RT2770 QSG EN 6/3/07 5:19 PM Page 4 2. Positioning the Speakers 3 Left Rear Speaker (Surround) Left Front Speaker 3 4. Connecting to Audio Components 4 Rear Speaker 1 Front Speaker 2 Center 1 3 4 Right Rear Speaker (Surround) Subwoofer Right Front Speaker Courtesy Dolby Laboratories Front Surround sound Effect(FSsE) Setting If placing the rear speakers (surround speakers) at the back is not a good choice for you, you can use the Front Surround sound Effect(FSsE). Follow the following instruction for setting the speakers. Mounting the Speakers 1. Match the front left and rear left speakers together and match the front right and rear right speakers together. Place the front speaker upside down. 2. Slide in the hinge to the bottom of the front speaker until the ‘click’ sound is heard. 3. Slide in the rear speaker to the hinge until the ‘click’ sound is heard. 4. Attach the four rubber feet provided to the top of the front speaker. 2 1 Hinge DVD/SAT/CAB Digital Input Connect components capable of outputting Dolby digital (e.g. DVD or SAT) or standard PCM (CD) format digital signals. Read section on "Input Signal Setting" under "Advanced Sound Control" carefully to adjust the matching input settings. Adjusting the Angle of the Speakers To achieve the best Front Surround sound Effect (FSsE), adjust the mounted front left and the rear left speakers to the left for an angle of 25o - 45o from the center. Adjust the mounted front right and rear right speakers to the right in the same way. 1. Center: In surround mode, the center speaker carries most of the dialog as well as music and effects. It should be set between the left and right speakers. 2. Front Speakers: Front speakers carry primarily music and sound effects. 3. Rear Speakers: The rear speakers’ overall sound balance should be as close as possible to the front speakers. Proper placement is vital to establish an evenly distributed sound field. 4. Subwoofer: A subwoofer is designed to reproduce powerful low bass effects (explosions, the rumble of spaceships, etc.) which dramatically heighten the action on the screen. 3. Front Surround sound Effect(FSsE) Setting (Optional) COAXIAL OPTICAL Rubber Feet • The jacks on the back of the unit are used to connect to other components. One optical and one coaxial digital input jacks are provided for connection. • To connect a SAT receiver or a DVD player with a digital output, use an optical digital cable (not included) or a coaxial digital cable (included) to carry the audio signal and enjoy Dolby Digital sound quality. General controls Rear Speaker Front panel controls Rear Speaker 11 1 25 o - 4 o 5 2 Front Speaker 25 o - 45 o Front Speaker 3 10 Center 4 Place the rear speakers and subwoofer a foot or more away from TV. After adjusting the angle, the speaker should look like this illustration. 5 6 7 8 1. ON/STANDBY Turns on/off the unit. When the unit is turned on, the unit will go to the mode it was in before powered off. 2. Starts and pauses playback in USB mode. 3. Stops playback in USB mode. Bottom Front Speaker Top 9 7. / (SURROUND buttons) Selects digital sound processor. (STEREO, HALL, CHURCH, CLUB, STADIUM, STUDIO, 3 STEREO, DOLBY PL EMULATION, DOLBY PL II MUSIC, DOLBY PL II MOVIE) 8. DVD/DVR, TV, SAT.CAB, AM/FM, VCR, USB and LINE-IN (SOURCE buttons) Selects sound source. 9. Headphones jack 4. / (PRESET buttons) Selects preset stations in AM/FM mode. Directly accesses the previous or next track in USB mode. 10.MASTER VOLUME Adjusts the volume. 5. USB jack Connects USB devices. 11.SUBWOOFER Selects among subwoofer output levels. (SOFT SUBWOOFER, BALANCE SUBWOOFER, STRONG SUBWOOFER, POWERFUL SUBWOOFER) 6. LINE IN Connects components for audio input.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2007:03:06 17:25:30+08:00 Modify Date : 2007:03:06 17:26:52+08:00 Page Count : 2 Creation Date : 2007:03:06 09:25:30Z Mod Date : 2007:03:06 09:25:30Z Producer : Acrobat Distiller 5.0.5 for Macintosh Author : Phyllis Metadata Date : 2007:03:06 09:25:30Z Creator : Phyllis Title : RT2770 QSG ENEXIF Metadata provided by EXIF.tools