RDI Technology CA330 WIRELESS CAMERA User Manual USERS MANUAL
RDI Technology (Shenzhen) Co., Ltd. WIRELESS CAMERA USERS MANUAL
USERS MANUAL
JASCO
INDOOR
45233 WIRELESS CAMERA
Congratulations on your purchase of the JASCO™ Wireless Camera (45233
Wireless Camera) All JASCO™ Wireless Cameras includes high quality video and
audio components. When combined with a JASCO™ Wireless Video
Monitor/Receiver, you have an ideal combination for watching the baby,
monitoring the porch, pets, yard or the pool. It is also suited to many small
business applications.
FEATURES ///
1.900MHz wireless technology.
2.Plug’n’play installation.
3.High resolution color video camera.
4.Built-in microphone transmits sound from camera to monitor.
5.High quality audio and video components for long life.
6.IR LEDs for night vision.
7.Adjustable antenna on camera for better signal transition.
8.Rechargeable LI polymer Battery(not include, sold separately)
operation,850MAH battery can last for about 5 hours.
SYSTEM CONTENTS ///
Identify all parts before proceeding with installation.
THINGS TO CONSIDER BEFORE INSTALLATION ///
For best performance, follow these simple guidelines:
1.Camera(s) should be installed between 8 and 13 feet above the area to be
monitored
2.The Camera should be aimed accordingly to optimize viewing area
3.For best transmission, avoid installations where there are thick walls or major
obstructions between the Camera and Monitor
INSTALLING THE CAMERA (TRANSMITTER) ///
1.Unpack the Camera.
2.Place the Camera in an optimal position
3.To use the 9V camera power adapter, connect power jack to the input on the
base of the Camera. Make sure the Camera is positioned no more than 5 1/2 feet
from an AC power outlet
4.Desktop mounting
Just place the camera to where you want to, and make sure the camera is
within the RF range. As shown below:
5.Wall mounting
6.The Camera (Transmitter) installation is now complete.
NIGHTVISION ///
The camera includes IR LEDs, which allows viewing up to 5 feet in the dark when
used with the adapter. To turn on the IR LEDs, there is a small photoconductive
resistor on the front of the Camera, which enable the camera automatically turn on
the IR LEDs on low light conditions.
MULTI-CAMERA OPERATION ///
The JASCO™ Wireless Camera System is designed to work with up to (2)
Cameras. Additional Cameras are sold separately. IMPORTANT: When using
more than one Camera, make sure each Camera is assigned to a specific
channel by adjusting the corresponding slide switch left or right. The slide switch
is located at the underside of the camera housing.
TROUBLE SHOOTING
If you are having trouble operating this product, please consult the guide below:
SYMPTOM REMEDIES
No camera picture
1. Check all connectors. Make sure camera(s) and receiver are
switched ON.
2. Ensure camera(s) and receiver are set to correct channel(s).
3. Make sure camera is within range of receiver.
Blank monitor
1. Make sure receiver is switched ON.
2. If using AC adapter, make sure it is plugged in.
3. If using batteries, make sure they are installed correctly, or
try recharging(replacing) them.
Interference on camera
picture
1. Make sure each camera (transmitter) is within range, and
that no large obstructions are blocking the signal.
2. Try repositioning the camera, receiver or both to improve the
reception quality.
3. If a camera is positioned close to the receiver, point antenna
away from the receiver.
4. Reposition other nearby equipment transmitting on the
900MHz frequency.
Audio problems
1. Ensure the volume is turned up sufficiently on the Monitor
(or TV).
2. Make sure the sound is within the microphone range.
3. If the unit emits a loud wailing sound (feeds back), try
moving the camera away from the receiver or angle the
receiver differently.
SPECIFICATIONS
Camera
TV System PAL or NTSC
Integrated Lens 5.6mm, F2.0 fixed focus
Resolution 360 horizontal TV Lines
Signal/Noise Ratio 46 dB
High-Speed Electronic Shutter 1/60 - 1/15,000 sec
Image Sensor 1/4” CMOS
Min. Illumination 0.1 lux
Current Consumption 80~140mA
Overall Size 2.35”W x2.74Hx3.16D
Frequency Range 910 - 920 MHz
Modulation
FM
Video
Signal/Noise
Ratio
46db
Audio
Signal/Noise
Ratio
45db
Channel
Selection
Electronic
tuning
Case
Finish
UV
resistant
ABS
plastic
APPROVALS
///
This
device
complies
with
part
15
of
the
FCC
rules.
Operation
is
subject
to
the
following
two
conditions:
(1)
This
device
may
not
cause
harmful
interference,
and
(2)
This
device
must
accept
any
interference
received,
including
interference
that
may
cause
undesired
operation.
FCC NOTE:
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.
CE:
Need
to
test
FCC:
Need
to
test
WARRANTY
///
This
product
has
a
one
year
manufacturer’s
warranty
which
covers
parts
and
labor
only.
In
the
unlikely
event
that
you
encounter
a
technical
or
quality
issue,
please
contact
JASCO
at
***********
JASCO
will
replace
defective
units
within
the
warranty
period.
DRILLING
TEMPRATE
If
you
decide
to
mount
the
camera
on
a
wall,
use
this
page
as
a
guide
for
drilling
the
required
holes