RDI Technology CA650ML DIGITAL WIRELESS CAMERA AND LCD MONITOR User Manual LW2451 SERIES BODY

RDI Technology (Shenzhen) Co., Ltd. DIGITAL WIRELESS CAMERA AND LCD MONITOR LW2451 SERIES BODY

USERS MANUAL

DIGITAL WIRELESS CAMERA AND LCD MONITOR SYSTEM INSTRUCTION MANUAL MODEL: CMD6537ML CAMERA MODEL: CA650ML MONITOR MODEL˖M370ML
1OverviewOverviewVideo MonitorVideo ButtonPress the Video button to turn off the monitor. The speakers will remain on.Press the menu button to access the monitor menu options.JoystickUse the joystick to navigate system menus. Press down on the joystick to confirm a selection.Volume ControlPress + / - to control the volume.Audio Level IndicatorDisplays the level of sound detected by the camera.Menu ButtonTalk ButtonHold the talk button to enable two-way communication between the video monitor and camera.AUTO LEDGlows blue when auto-record is enabled.Press the Next button to change lullaby.ON/OFF SwitchSlide the power switch to the ON position to turn the video monitor on.Lullaby ButtonPress the Lullaby button once to begin playing a lullaby song. Press the Lullaby button again to stop the song.Music ButtonsmicroSD Card SlotInsert a microSD card to record video. Power LEDGlows green to indicate unit is powered on.
2OverviewVideo Monitor (continued)How to use the joystick in menusThe joystick allows you to navigate through the video monitor menus.Sequence/ Quad ButtonPress the Sequence/Quad button to view video in quad mode (4 screen split view), or in sequence view.Scan ButtonScans for cameras that detect sudden noises.Charging LED IndicatorGlows red to indicate video monitor is charging.Cam ButtonPress the Cam button to switch between channels 1-4.Power PortConnect the power adapter labeled "For Monitor" into the power port.Micro USBConnect a micro USB cable (included) between the video monitor and a computer to view video from your PC or remotely (setup required)SpeakerOutputs sound received from the camera.Power Port (DC5V)Connect the power adapter labeled "For Monitor" to the charging cradle.Antenna SwitchSlide the Antenna Switch towards the unlock position to reveal the antenna.OK ButtonPress down on the joystick to confirm a selection.Press up, down, left, or right to navigate through the menus.
3OverviewCamera Overview LEDThe camera has infrared (IR) LEDs that allow you to see in the dark.Sensitivity DialAdjust the level of audio-detection sensitivity of the camera to trigger an alert.Volume DialAdjusts the speaker volume.Battery Charging IndicatorGlows to indicate battery is charging. This requires rechargable batteries (not included, part # XXXXX)Power SwitchTurns the camera on and off.SpeakerThe speaker allows you to hear the person speaking into the video monitor.Power Port (DC5V)Plug in the connector from the power adapter labeled "To Camera" to power the camera.MicrophoneThe microphone allows you to speak to the person through the video monitor.Pair ButtonPress the Pair button during the pairing process with the video monitor. Temperature SensorDetects the room’s ambient temperature.
4OverviewOSD overviewThe video monitor displays the following icons during normal use. The table below summarizes the video monitor icons, and what they mean.Icon MeaningNo signal between the camera and video monitor.Full signal between the camera and video monitor.The camera night light is currently on.The video monitor battery is low.Auto recording is enabled.Manual recording is enabled.Two-way talk is enabled. You can now speak into the video monitor.Have factory confirm which icons will be included, and what each icon means.
5Basic SetupBasic SetupUsing the cable clipsIncluded are a bag of cable clips that allow you to manage the wires from the power adapters. It is highly recommended that you use the cable clips keep the power cords out of reach from young children and infants.To use the cable clips, slide the wires in between the clips, then peel the protective film behind the clip. Stick the clip along the wall /table leg so that it is out of reach.Safety percautions?line art of cable clip from vince- diagram with cable setup around baby crib
6Basic SetupOptional: Charging the cameraThe camera base has a built-in battery compartment where you can install three AA batteries. This may be useful if you want to temporarily monitor an area with no power outlets. To install batteries in the camera:1Unplug the power cord from the base of the camera.2Remove the battery cover.3Insert three AA batteries into the battery compartment and replace the battery cover.NOTE: You can insert rechargable batteries into the camera base. Connect the power adapter into the camera base to charge the batteries. Charge the batteries for 4.5 hours for a full charge.NOTE: To order rechargable batteries, contact Lorex customer support at XXXXXXX and inquire about part number XXXXXX.. To charge the camera battery:1Insert 3 AA batteries into the battery compartment.2Plug the power adapter labeled "For Camera" into a power outlet.3Connect the end of the power adapter into the port labeled DC5V.Remove battery cover from camera base.Connect the power adapter into the DC5V port
7Basic SetupCharging the video monitorThe video monitor can be charged using the cradle, or directly through the DC5V port on the side of the video monitor. The batteries stop charging once it is full. You will not"over-charge" the batteries. A full charge requires 4.5 hours.To charge the video monitor using the cradle:1Connect the power adapter labeled "To Monitor" to a power outlet.2Connect the end of the power adapter into the charging cradle.3Rest the video monitor on the charging cradle, ensuring the metal contacts touch.To charge the video monitor without the cradle:1Connect the power adapter labeled "To Monitor" to a power outlet.2Connect the end of the power adapter into the DC5V port on the video monitor.DC5V portDC5V port
8Basic SetupViewing your cameraTo view your camera:1Connect the camera and video monitor to a power source. NOTE: The power adapters are labeled "For Camera" and "For Monitor" 2Slide the power switch to the ON position on the camera and video monitor. The video monitor will automatically scan for cameras in range.Testing your setupIt is recommended that you test your camera setup so that you get the best picture and sound quality from your video monitor.Test the camera and video monitor reception:1Place the camera and video monitor in two different rooms.2Have one person monitor the signal strength on the video monitor.3Have a second person move the camera in different locations of the room. The person holding the video monitor can direct the person holding the camera, if the signal strength is low or high.Test the camera volume level:1Place the camera and video monitor in two different rooms. Have a person in each room.2Have a person with the video monitor press and hold the TALK button to confirm the volume level from the camera. Adjust the volume dial on the camera as required.3The person holding the video monitor can determine if the camera needs to move to a different location of the room for better sound quality.Slide power switch to the ON positionCamera image appears on monitor
9Basic SetupCamera SetupAdjusting the camera sensitivityThe camera’s Sensitivity dial allows you to adjust how sensitive the camera is in detecting ambient sounds. For example, if the camera detects the sound of a baby crying, the video monitor beeps. To adjust the camera’s sensitivity level:• Scroll the Sensitivity dial on the side of the camera towards the + symbol for increased sensitivity. Scroll the dial towards the - symbol for reduced sensitivity.Adjusting the camera volumeThe camera’s speaker volume can be adjusted to the desired level. Scroll the dial towards the + symbol to increase the volume. Scroll the dial towards the - symbol to reduce the volume.Turning on the camera night light• Press the night light button on the top of the camera to turn the night light on or off. The night light button glows when the night light is on.Night Light ButtonPress the Night Light button to turn on or off the camera night light.Adjust the camera volumeAdjust the Volume dial to the desired level.Adjust the camera angleTilt the camera to the desired camera position.Adjust the camera sensitivityAdjust the sensitivity dial to the desired level.
10Basic SetupMonitor SetupUnlocking the monitor antennaThe monitor has a built-in antenna that improves signal range. It is recommended that you extend antenna for optimal performance.To unlock the monitor antenna:• Slide the lock button to the right. Reading the power indicator LEDThe power indicator LED glows green when the monitor is powered on. When the monitor is turned off, or is out of batteries, the power indicator LED turns off.Slide the Lock button to the right to release the antennaPower LED
11Basic SetupPairing one cameraThe camera included with the monitor has already been paired up with the video monitor. If for any reason your monitor and camera are not paired up, follow the directions below.To pair a camera to the video monitor:1Place the camera and video monitor 12 inches apart. Turn on the camera and the video monitor.2Press the Menu button on the monitor, then select Pairing and press the OK button.3Select Camera 1, and press the OK button.4Press the Pair button behind the camera within 30 seconds.Pairing multiple camerasYou can add a maximum of four (4) wireless cameras to a video monitor (model # LW2401 AC1, LW2451 AC1).To pair multiple wireless cameras to the video monitor:1Press the Menu button on the video monitor.2Select Pairing and then press the OK button.3Select the desired channel number you wish to pair (i.e. Channel 2) and press the OK button.NOTE: Each camera must be assigned to a different channel.4Turn on the camera you wish to add, and then press the Pair button behind the camera within 30 seconds.5Repeat for the remaining cameras, selecting a different channel number (i.e. Channel 3) in the Pairing menu.Pair button
12Basic SetupViewing Multiple CamerasYou can view all of the connected cameras in quad view or sequence view. The video monitor supports a maximum of four cameras.To view multiple cameras in quad view:• Press the SEQ/Quad button on the video monitor.To exit quad view:• Press the SEQ/Quad button repeatedly to exit Quad mode.Sequence ViewIn sequence view, the monitor switches between the four channels every six seconds. For example, the monitor displays channel 1 for six seconds, then channel 2 for six seconds etc.To enable Sequence view:1SEQ/Quad buttonVideo monitor displays 4 video images (quad view)
13Basic SetupUsing the talk functionThe talk function allows you to speak into the video monitor, while the camera outputs your voice. The camera also has a built-in mic, which allows the person to speak into the camera.To use the talk function:1Adjust the Volume dial on the camera and video monitor to the desired level.2Press and hold the Talk button on the video monitor and begin speaking. Release the Talk button when you are finished.NOTE: You must release the Talk button on the video monitor in order to listen to the audio from the camera.LullabyThe Lullaby feature allows the camera to play musical tunes. To configure the lullaby feature:• Press the Lullaby button to begin playing a lullaby on the camera.• Press the Next button to change the tune.• Press the Lullaby button to stop the lullaby.Hello HelloTalk and listen (Two-way communication)Lullaby buttonNext button
14Basic SetupUsing the Scan featureThe Scan feature temporarily turns off the video monitor, and waits for a camera to detect noise. Once a noise triggers the camera, the video monitor automatically turns on, and beeps to notify you.To enable the Scan feature:• Press the Scan button.Scan button
15RecordingRecordingThis system is capable of recording video on a microSD card. A microSD card is included so you can begin recording right away.Use the table below to help you estimate recording times on various sizes of SD cards. Times are shown in hours, minutes, and seconds.Manual Recording & Auto RecordingPrerequisite:• Insert a microSD card into the microSD slot in the video monitor. NOTE: The video monitor supports microSD cards up to 32 GB (gigabytes).microSD Card Capacity Recording Time (Hour:Minute:Second)512 MB 1:20:221 GB 2:32:052GB 5:02:474GB 10:15:248GB 17:58:2816 GB 34:54:2532 GB 60:10:13NOTE: Estimated recording times based on tests using Kingston brand SD cards. There may be a slight variatino when using different brands of memory.microSD slot Orient the microSD card as shown, then insert it into the microSD slot.
16RecordingManual RecordingManual recording allows you to record video by pressing the record button on the video monitor. Manual recording may be useful if you want to quickly record an event to your video monitor while you are watching it.To start manual recording:1Press the M button on top of the video monitor. The video monitor begins recording.2Press the M button again to stop recording.• The file is saved and a icon appears to indicate the recording has been saved.Auto RecordingAuto Recording allows the video monitor to record only when the camera detects a sound. For example, if you are monitoring a sleeping baby, the video monitor will not record until the baby’s cry triggers the camera. Prerequisites:• Adjust the sensitivity level on the Camera to the desired level. The greater the sensitivity, the more sensitive the camera is to noise. This means that the slightest sound will cause the video monitor to record. To enable Auto Recording:• Press the A button on top of the video monitor. The video monitor turns off, and the AUTO LED glows blue. When the camera detects a sound, the video monitor begins to record.NOTE: By default, the video monitor records for X seconds after it detects sounds.- how long does the video monitor record for after a noise? 5~30 seconds as set from the "Trigger Record" menu?-max recording durnig auto recording is 10 consecutive minutes (if there is constant sound).
17RecordingViewing recorded files on the microSD memory cardThere are two ways that you can view the recorded video files on the microSD memory card: through the video monitor, or on your computer.To view video files through the video monitor:1Press the OK button on the video monitor (press down on the joystick). The File List menu opens.2Press OK to open the VIDEO folder.3Select the desired folder and press the OK button.NOTE: The folders are named by the year, month, and date. For example, a folder named 110204 means that the folder was created in 2011, February (02), on the 4th.4Select the desired video file you wish to view, and press the OK button to begin playback.VIDEO110204• Press right on the joystick repeatedly to increase playback speed. • Press left on the joystick to reduce playback speed...102904_1 1MBVideo Playback ControlsFast forwardRewind
18RecordingTo view video files on your computer:1Press down on the microSD card with a small rigid object (i.e. finger nails) to remove the memory card.2Insert the microSD card into a memory card reader (not included).NOTE: If required, use the included SD card adapters to convert the microSD card to SD/HCSD.3When the AutoPlay menu appears, click on "Browse Folders.." 4Double-click the VIDEO folder, then select the desired sub-folder you want to open.NOTE: The folders are named by the year, month, and date. For example, a folder named 110204 means that the folder was created in 2011, February (02), on the 4th.5Double-click the desired video file to begin playback. Push the microSD card to eject
19Configuring your video monitorConfiguring your video monitorEnabling the Auto Mute featureThe Auto Mute feature eliminates white noise when monitoring a room. The Auto Mute feature works by muting the video monitor when the camera detects silence. Once the camera detects a sound, the video monitor begins to play sound again.To enable Auto Mute:1Press the Menu button on the video monitor.2Select Auto Mute ( ) and press OK.3Select ON to enable auto mute.4Press the OK button to save your settings.Enabling the Overwrite FeatureThe Overwrite feature allows the video monitor to continuously record on the microSD card. When the microSD card is full, the video recordings begin to overwrite the first video entry (first in first out).To enable the overwrite:1Press the Menu button on the video monitor.2Select Record ( ) and press OK.3Select File Overwrite and press OK.4Select Yes and press the OK button to save your settings.
20Configuring your video monitorChanging the date and timeTo adjust the video monitor’s date and time:1Press the Menu button on the video monitor.2Select Settings ( ) and then press the OK button.3Select Date & Time and then press the OK button.4Use the joystick to configure the Year, Month, and Date. • Press up/down on the joystick to adjust the values. • Press left/right to move between the year, month, and date.5Press the OK button to save your changes.Adjusting the alarm volumeThe video amonitor ’beeps’when the camera detects motion (?) . You can adjust the alarm volume.To change the video alarm volume:1Press the Menu button on the video monitor.2Select Settings ( ) and then press the OK button.3Select Alarm Volume and then press the OK button.4Press left and right on the joystick to adjust the alarm volume.5Press the OK button to save your settings.2011-02-1409:54:30
21Configuring your video monitorAdjusting the screen brightnessTo adjust screen brightness:1Press the Menu button on the video monitor.2Select Settings ( ) and then press the OK button.3Select Brightness and then press the OK button.4Press left and right on the joystick to adjust the screen brightness.5Press the OK button to save your settings.Adjusting the Timer settingsThe timer feature allows the video monitor to beep after a set duration as a reminder tool.To enable the Timer:1Press the Menu button on the video monitor.2Select Settings ( ) and then press the OK button.3Select Timer and then press the OK button.4Select ON and then press the OK button. 5Select Repeat Interval and press the OK button.6Enter the desired time that you want the set the timer at using the joystick. Press left / right to navigate the values. Press up/down to adjust the values.7Press the OK button to save your settings.Screenshot of timer screen
22Configuring your video monitorConfiguring the temperature alert rangeThe camera has a built-in temperature sensor. You can configure the video monitor to alert you through beeps, when the temperature falls above, or below a temperature range. To configure the temperature alert range:1Press the Menu button on the video monitor.2Select Settings ( ) and then press the OK button.3Select Temp. Alert Range and then press the OK button.4Using the Joystick, press Up/Down to change selection, left/right to adjust the values:• Beside Low Temperature, enter the lowest room temperature the camera should detect.• Beside High Temperature, enter the highest room temperature the camera should detect.5Select the ON button and then press the OK button on the joystick.Adjusting the temperature unit of measurement You can change the video monitor to display temperature in Fahrenheit (F) or Celsius (C).To change the unit of measurement:1Press the Menu button on the video monitor.2Select Settings ( ) and press the OK button.3Select Temp. Display and press the OK button.4Select either C for Celsius or F for Fahrenheit.5Press the OK button to save your settings.
23Configuring your video monitorErasing the memory cardOnce you erase the memory card, the video will be deleted permanently. To erase the memory card:1Press the Menu button on the video monitor.2Select Settings ( ) and then press the OK button.3Select Format memory and then press the OK button.4Select Yes and then press the OK button to erase the memory card.• The message "Format OK" appears to confirm that the card has been erased.Restoring default settingsRestoring your video monitor settings reverts the settings you made to the factory settings.To restore the video monitor factory defaults:1Press the Menu button on the video monitor.2Select Settings ( ) and then press the OK button.3Select Factory Reset and then press the OK button.4Select Yes, and then press the OK button.
26Viewing your cameras using SkypeViewing your cameras using SkypeConnecting to your video monitor through Skype is a convenient method to view your cameras from anywhere with an internet connection.Prerequisites• A PC (Macs currently not supported)• High speed internet connectionStep 1 of 3: Installing the camera driversYou will need to install the camera drivers located on the software CD (included).To install the camera drivers:1Insert the software CD into the computer, and browse the contents on the CD.2Double-click the USB Driver folder, then double-click the USB Driver icon ( ).3Follow the on-screen instructions to install the camera drivers.Skype serverHow it worksThe laptop connects to the Skype server. The Skype server is connected to your computer. Your computer connects to the video monitor, which captures video from the camera.
27Viewing your cameras using SkypeStep 2 of 3: Creating a Skype accountA Skype account allows you to connect to your camera through using the Skype service. Skype is a service that allows users to make voice calls and video calls to anywhere in the world. To create a Skype account:1Go to www.skype.com, and click on Join Skype.2Click Create Account. Fill in the appropriate fields. 3Click the I Agree - Continue button.Join SkypeCreate AccountIA C tiI Agree - Continue
28Viewing your cameras using Skype4Follow the on-screen instructions to download and install Skype on your computer.5Repeat the process to make a second account. You will need two accounts --- one for the camera, and one for yourself.Step 3 of 3: Connecting to your cameraOnce you have created two Skype accounts, you are ready to connect to your camera. Step 1: Connecting the video monitor to your computer1Connect the mini USB cable (included) to your video monitor and into the computer’s USB port. 2Turn on the video monitor and camera. The video monitor displays the following: "USB PC CAMERA MODE"Mini USB cable
29Viewing your cameras using SkypeStep 2: Log in and configure your Skype account1Log in to your Skype account (for your camera) from the computer that is connected to your video monitor, 2Click on Tools>Options.3Click the Calls button ( ).4Select the "Answer incoming calls automatically" checkbox and the "Start my video automatically when I am in a call" check box.5Click Save.
30Viewing your cameras using SkypeStep 3: Add your camera as a friendThis step requires you to log in to your personal Skype account from a different computer.1Log in to Skype using your personal account (this is differenet from your camera’s account).2Click on Contacts>Add a Contact.3Beside the Skype Name field, enter the account name for your camera.4Click the Add button.Step 4: Connect to your cameraAfter you have added your camera as a contact, you can connect to your camera.To connect to your camera:• From the contact list, right-click on your camera’s account name, and click Call.• The video call begins automatically.Enter the camera account name here
31Viewing your cameras using SkypeChanging the camera viewIf you have more than one camera connected to your video monitor, you can specify which camera you want to connect to using Skype. You can only view one camera at a time. Viewing through Skype does not allow you to change cameras.To change the camera view:1From your video monitor, press right on the joystick to change the camera number.• The camera number changes from "CAM 1" to "CAM 2". Press right on the joystick to change cameras.Cam 2USB PC CAMERA MODE
32TroubleshootingTroubleshootingImproving receptionNo picture or sound on MonitorSound but no picture on monitorpicture but no soundpicture not clearsquealing- get questions from summer infant handoutTips on improving connection
FCCNoticeFCC NOTICE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. IC NOTE˖ LOW POWER DECIVES___RF Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device." CLASS B OR A PRODUCTION This Class [B] digital apparatus complies with Canadian ICES-003. CLASS B OR A PRODUCTION This Class [B] digital apparatus complies with Canadian ICES-003. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter.

Navigation menu