RDI Technology M420 DIGITAL MONITOR User Manual BB2411 Video Baby Monitor User s Guide
RDI Technology (Shenzhen) Co., Ltd. DIGITAL MONITOR BB2411 Video Baby Monitor User s Guide
Contents
- 1. User Manual
- 2. Users Manual
User Manual
ENGLISH FRANÇAIS ESPAÑOL
CARE ‘N‘ SHARE
VIDEO BABY MONITOR
BB3500 Series / BB4300 Series
Version 1.0
USER’S GUIDE
Safety Precautions
• Adult assembly is required. Keep small parts away
from children when assembling.
• This product is not a toy. Do not allow children or
infants to play with it.
• This video monitor is not a substitute for responsible
adult supervision.
• Test the video monitor before use. Become familiar with
its functions.
• Keep the cords out of reach from children and infants.
• Never use extension cords with power adapters.
• Only use the chargers and power adapters provided.
Do not use other chargers or power adapters as this
may damage the device and battery pack.
• Only insert batteries/battery pack of the same type.
• Insert batteries with the correct polarity.
• Do not mix new and used batteries.
• Do not mix alkaline, standard, and rechargeable
batteries.
• Remove exhausted batteries from the product.
• Keep all batteries away from children and infants.
• Dispose or recycle batteries in accordance with local
laws, which may vary by location.
• Do not cover the video monitor with a towel or blanket.
• Do not use the video monitor near water.
• Do not install the video monitor near a heat source.
• Do not touch the plug contacts with sharp or metal
objects.
• Keep this user’s guide for future reference.
To Avoid Injury to
Children & Infants:
•MAKE SURE to keep the camera and all power
cords are least 3ft / 1m away from cribs and out of
reach of your child.
• Use the included cable clips to help keep power
cords away from your child.
3ft / 1m
Product Includes..............................3
Monitor Overview...........................3
Camera Overview...........................4
Getting Started ...............................6
Optional - Mounting the Camera............... 7
Using the Cable Clips.............................. 9
Using Your Baby Monitor ..............10
Adjusting Volume .................................. 10
Changing Channels............................... 11
Talking to Your Baby..............................11
Using Digital Zoom................................ 11
Locking the Monitor............................... 12
Video Off Mode (Audio Only Mode)....12
Inserting a microSD Card ....................... 12
Video Recording ................................... 13
Taking Snapshots ..................................14
Using the Night-Light .............................14
Playing Sleep & Soothe Sounds............... 15
Using Quad and Scan View Mode.......... 16
Using the Main Menu ............................ 17
Setting the Date and Time....................... 17
Adjusting Camera Brightness .................. 18
Configuring Recording Options............... 19
Configuring Recording Options............... 19
Changing Languages............................. 20
Configuring Alarm Volume ..................... 21
Temperature Alerts.................................22
Using the Timer ..................................... 24
Using Motion Tracking
(P/T Camera Only)................................ 24
Using Playback Mode............................25
Formatting Memory Card....................... 28
Using Power Saving Mode ..................... 29
ENGLISH
1
Table of Contents:
Restoring Default Settings ....................... 29
Remotely Connecting to Your
Cameras .......................................31
Using Audio / Video Out ...............32
Pairing Additional Cameras ..........34
Technical Specifications .................36
Fixed Camera ...................................... 36
P/T Camera ......................................... 36
3.5” Monitor ........................................ 36
4.3” Monitor ........................................ 36
Unit Dimensions ............................37
Troubleshooting ............................38
Need Help?...................................38
2
ENGLISH
3
Product Includes
x1*
x1
Fixed Camera
Monitor
Power Adapter
x1*
*See product packaging for exact contents
x1*
Mounting Kit
Power Adapter
x1
Monitor Overview
Cable Clips
x3*
Enter / exit
menu
Switch channel
Talk
Zoom
Stand Battery compartment
Power / Sound LED’s*
Speaker
*Power / Sound LED’s on the left side of the 3.5” LCD monitor
x1*
Pan/Tilt (P/T)
Camera
Reset
button
OR
P/T Mounting
Plate
(for P/T camera only)
x1*
Joystick
Light
sensor
Microphone
Speaker
Lens
Infrared LED’s
Stand
Temperature
Sensor
Power port
Pairing button
Night light button
Fixed Camera (BB3500 / BB4300 Series)
Antenna
Camera Overview
Volume
controls Play / stop
sounds Next sound
microSD
slot
Charging
indicator
Power port
Mini USB port
AV out port
Lock mode
Quad
view /
Scan mode
Antenna Power / video on /off
Start / stop recordingNight light Snapshot
Wi-Fi Cradle connector*
Mounting thread
*Wi-Fi Cradle not included. See “Remotely Connecting to
Your Cameras” on page 31 for details.
LEFT
RIGHT
TOP
BOTTOM
4
Power
switch Power
indicator
Volume dial
P/T Camera (BB3500 Series)
Power port
Antenna
Speaker
Lens
Light sensor
Pairing buttonPower button Volume dial
Ceiling mount switch
Microphone
Temperature sensor
Infrared LED’s
ENGLISH
5
Make sure all power cables are at
least 3ft / 1m away from the crib and
out of reach of your child.
Use the included cable clips to help
keep power cords away from your
child.
Connect the power adapter to the monitor.
Power button
Getting Started
1
2
Connect the power adapter to the
camera.
Slide the power switch to ON or press
and hold the power button.
Power switch
3
Fixed camera
P/T camera
Press and hold the power button on top
of the monitor for 3 seconds. The display
turns on.
4
Power button
6
Make sure all power cables are at
least 3ft / 1m away from the crib
and out of reach of your child.
Use the included cable clips to help
keep power cords away from your
child. See “Using the Cable Clips” on
page 9 for installation details.
38mm
Fixed Camera
Reattach the
camera base
here
ENGLISH
7
Optional - Mounting the Camera
Tap anchors into holes with a hammer. Insert
screws 2/3 of the way.
Before permanently mounting the camera:
• Determine where you will get the best view of
your baby.
• Ensure the power cable is long enough to power
the camera.
• Test your camera(s) before mounting permanently.
1Drill 2 holes in the wall with centers exactly
38mm apart.
2
5Align the mounting points with the screws
and push the camera down.
To mount your camera:
3While holding the camera base firmly in
place, twist the camera counterclockwise to
remove it from the base.
4Reattach the base to the mounting thread on
the back of the camera.
8
P/T Camera
26mm
Ceiling mounting
switch
1Drill 2 holes in the wall with centers exactly
26mm apart.
Hold the included P/T mounting plate
against the ceiling. Use a pencil to mark the
centres of the 3 mounting slots. Drill holes
where you have marked
NOTE: Make sure that the lone mounting
slot points toward the viewing area.
Tap anchors into holes with a hammer. Insert
screws 2/3 of the way.
2
OR
94mm
34mm
Place the camera on the mounting plate and
twist clockwise to lock in place.
5
NOTE: For ceiling mounting, use the ceiling mounting
switch on the bottom of the P/T camera to invert the video
image.
If wall mounting:
If ceiling mounting:
Align the slots on the mounting plate with the
screws and push down to lock in place.
3
Tighten the screws to secure the mounting
plate in place.
4
Viewing area
ENGLISH
9
Pull up to extend
antenna
tIt is recommended to charge the battery for 5 hours
before use.
tThe charge LED glows red while the monitor is
charging and glows green when charging is complete.
tFor overnight monitoring, it is recommended to connect
the power adapter. When fully charged, the monitor
will stay on up to 4 hours in normal mode or 8 hours in
Video OFF mode.
tUse Power Save mode to conserve battery power.
tThe power LED glows constantly when battery is full
and blinks twice per second when running low.
tFor better reception, pull up the antenna on the
monitor.
Tips
Option 2
Option 3
Option 1
Thread the extra cable through the cable clip notches.
Thread the extra cable through the cable clip notches.
Wrap the excess cable around the clip.
Wrap the excess cable around the clip.
Using the Cable Clips
Press + and - to adjust monitor volume
Adjusting Volume
Fixed Camera P/T Camera
Use the volume
dial to adjust
camera volume
Monitor
Using Your Baby Monitor
The monitor shows the following icons during use:
Icon Meaning
Signal strength
Selected
channel
REC Recording
Volume muted
X2 Digital zoom
activated
Song currently
playing
Talk feature
activated
Touch buttons
locked
Timer set
Night light on
Icon Meaning
microSD card
inserted
File overwrite
enabled
New pictures
or videos
Battery full
Battery low
Battery
charging
68°F Current room
temperature
Out
of
range
Camera out of
range or off.
10
Press to
cycle through
connected
cameras.
The currently
selected camera
is shown on
screen.
To connect additional cameras to the
monitor, see “Pairing Additional Cameras”
on page 34.
The monitor only plays sound from the
camera that is currently being viewed.
Changing Channels
1Press on the monitor to zoom in. A X2
icon appears on the screen.
2Move the joystick to adjust the zoom area.
3Press again to return to normal
viewing mode.
Press and
hold to talk
to the selected
camera
Using Digital Zoom
Press
X2
Talking to Your Baby
ENGLISH
11
Press to turn the screen off and
monitor sound only.
The monitor will play sound from the
selected channel only.
NOTE: If Scan mode is enabled, the
monitor will play sound from the channel
that is currently selected.
Video Off Mode (Audio Only Mode)
Press any button to turn the screen back on.
1
2
Locking the Monitor
Press the Lock button ( ) on the side of the
monitor to disable the touch buttons on the front
of the monitor. A lock icon ( ) appears on the
monitor. Use this function to keep from pressing
touch buttons by accident.
Press
Press the Lock button ( ) again to re-enable
touch buttons.
Inserting a microSD Card
You must use a microSD card (not included) with
your video monitor to store picture and video files
from your camera(s). The video monitor supports
microSD cards up to 32 GB (gigabytes).
Video Off mode is a power-saving function which
turns the monitor’s display off while continuing to
play audio from the camera(s).
NOTE: See “Using Power Saving Mode” on page
29 for more power-saving options.
12
You can save recorded video from a single
camera or all cameras connected to your system.
Video files are saved to the microSD card (not
included).
Recording button
For details on viewing and managing videos, see
“Using Playback Mode” on page 25.
To record video:
To insert a microSD card:
1Orient the microSD card as shown below
and insert it into the microSD slot.
microSD card slot
You can now save recorded video and snapshots
from your camera(s) on your monitor. See “Using
Playback Mode” on page 25 for details on
viewing and managing video and picture files.
ENGLISH
13
Video Recording
1Use the monitor to view the channel(s) you
wish to record video from.
You can record video from one channel
by using normal viewing mode, or all
channels using Quad mode.
2Press the manual recording button ( ) on
top of the monitor to begin recording.
3Press the manual recording button ( )
again to stop recording. Recording will stop
automatically after 10 minutes.
A new file icon ( ) appears on the screen.
2Push the microSD card in until it clicks into
place.
Snapshot button
A new file icon ( ) appears on the screen.
For viewing and managing snapshots, see “Using
Playback Mode” on page 25.
Press the Snapshot button ( ) on top of the
monitor to save a picture of your monitor’s
display.
Press the night light button ( ) on top of the
monitor to turn on the night light for the currently
selected camera.
OR
Press the night light button ( ) on top of the
camera where light is needed.
Using the Night-Light
Press
Press
To take a snapshot:
The snapshot feature allows you to capture
images from a single camera channel in normal
viewing mode or all 4 channels in Quad mode.
Snapshot images are saved to the microSD card
(not included).
Taking Snapshots
Fixed Camera Only
14
Playing Sleep & Soothe Sounds
The camera can play 5 different pre-loaded Sleep
& Soothe sounds.
To play sounds:
1
2
Press the button on the side of the
monitor to play sound on the currently
selected camera.
Press the button on the side of the
monitor to play the next sound in sequence.
Press
A icon with the number of the currently
playing sound (1-5) appears in the bottom-
left corner of the monitor.
3Press the button to stop playing
sounds.
Press
1
ENGLISH
15
If you have multiple cameras, Quad view mode
and Scan view mode help you keep an eye on
them.
Scan view mode
Quad view mode
Use Scan mode to display video from each
camera connected to your system in full-screen for
3 seconds before switching to the next camera.
1From normal viewing mode, press
once to activate Scan mode. The monitor
will begin displaying connected video
channels in sequence.
2Press to return to normal viewing
mode.
Press once
Use Quad mode to display video from all 4
camera channels in split-screen (viewing area
appears black for channels that do not have a
camera connected).
1From normal viewing mode, press
twice to activate Quad mode. The monitor
will display all 4 channels in split-screen.
2Press to return to normal viewing
mode.
Press twice
Using Quad and Scan View Mode
16
1
Press
2
Move joystick to
adjust menu options.
Press to make a
selection.
Press to launch the main menu.
Move the joystick to adjust menu options.
Press the joystick to make a selection.
Press again to exit the main menu.
Press again to
exit menus
Using the Main Menu
Setting the Date and Time
1Press , then select Settings.
Select
Settings
2
Select Date
& Time
ENGLISH
17
3Move the joystick left and right to switch
between fields. Move the joystick up and
down to adjust the date and time.
4Push the joystick in to save changes.
2
Select
Setup
Select
Brightness
3Adjust the brightness level by moving the
joystick left and right.
Adjust
camera
brightness
1Press , then select Setup.
Adjusting Camera Brightness
NOTE: Video monitor uses 24-hour time.
5Press repeatedly to get back to normal
viewing mode.
18
Configuring Recording Options
1Press , then select Recording.
Select
Recording
2
Select Video
Quality
3Select High for clearer video or Low for
smaller file size.
You may choose to record video at a low or high
quality depending on your recording needs.
To adjust video quality:
You can configure your system to overwrite old
video files to make way for new recordings.
Configuring Recording Options
ENGLISH
19
1Press , then select Recording.
Select
Recording
To configure file overwriting:
2
Select
Language
Changing Languages
1Press , then select Settings.
Select
Settings
This baby monitor supports 3 languages: English,
French, and Spanish.
To change languages:
20
2
Select File
Overwrite
3Select Yes to enable file overwriting or
No to disable.
3Move the joystick up and down to switch
between languages. Press the joystick to
select a language.
2
1Press , then select Alarm.
Select
Alarm
Select Alarm
Volume
Configuring Alarm Volume
You can set the volume of the alarm used by the
timer and temperature alert functions.
3Move the joystick left and right to adjust
the volume of the alarm.
Adjust alarm
volume
ENGLISH
21
2
3
1Press , then select Settings.
Select
Settings
Select Temp.
Display Unit
Move the joystick up and down to select
oC (Celsius) or oF (Fahrenheit). Select the
desired unit for temperature display.
To select temperature units:
The temperature alert feature allows you to
ensure the baby’s room is at a comfortable
and safe temperature. The monitor beeps if the
temperature gets too hot or cold. Temperature
sensor is accurate within 3°F/1°C.
You can control the high and low temperatures
that trigger alerts or disable temperature alerts.
Temperature Alerts
1Press , then select Alarm.
Select
Alarm
To setup temperature alerts:
22
4Select On to activate temperature alerts.
Select On
t
2
3
Select
Temp.
Alert
Range
Move the joystick up and down to
change your selection. Move the joystick
left and right to adjust the high and low
temperatures that trigger alerts.
Adjust high
and low
temperatures
ENGLISH
23
Using Motion Tracking
(P/T Camera Only)
P/T cameras with motion tracking enabled will
follow any movement the camera detects.
NOTE: This feature is useful only for tracking
single objects, such as your baby moving around
the crib.
1Press , then select Alarm.
Select
Alarm
Using the Timer
You can set the monitor to sound an alarm after
a preset period of time to help you stay aware of
feeding and nap times.
2
3
Select Timer
Move the joystick left and right to switch
between hours and minutes. Move the
joystick up and down to adjust timer
duration.
4Push the joystick in when you have
finished setting the timer.
5Select On to start the timer or Off to
cancel.
Adjust timer
duration
24
Move the joystick up and down to change
the channel you are configuring. Move
the joystick right or left to toggle motion
tracking on and off.
3
Choose channel
2
1Press , then select Setup.
Select
Setup
Select Motion
Tracking
On/Off
To enable motion tracking:
Select On or
Off
Using Playback Mode
Playback mode is used to view and manage
snapshots and video files stored on the microSD
card (not included).
r
NOTE: You may use the joystick to override the
automatic movement of your P/T camera when
motion tracking is activated.
Press the joystick during normal viewing
mode.
1
To view files:
ENGLISH
25
Move the joystick up and down to select
the VIDEO or PICTURE folder. Press the
joystick to select a folder.
2
VIDEO
PICTURE
3Move the joystick up and down to choose
the date you wish to playback. Earliest
pictures and videos are shown first. Push
the joystick in to select a folder.
The folders are named by the year, month,
and date. For example, a folder named
02042013 means that the folder was
created in 2013, February (02), on the
4th.
4Move the joystick up and down to choose
the file you wish to playback. Push the
joystick in to select a file.
To back up picture / video files on PC:
1Remove the memory card.
2Insert the microSD card into a memory
card reader (not included)or use an SD
card adapter (not included) to convert the
microSD card to SD/HCSD memory card
format.
3When the AutoPlay menu appears, click on
Open folder to view files.
NOTE: If the Autoplay menu does not
appear, open Windows Explorer and
locate the microSD card manually. Double-
click to view the contents of the microSD
card.
26
Press the joystick to enter playback mode.
1
To delete files and folders:
4Double-click the VIDEO folder, then select
the sub-folder you want to open.
NOTE: The folders are named by the year,
month, and date. For example, a folder
named 02042013 means that the folder
was created in 2013, February (02), on
the 4th.
5Double-click the desired video file to begin
playback.
To back up picture / video files on Mac:
1Remove the memory card.
2Insert the microSD card into a memory
card reader (not included)or use an SD
card adapter (not included) to convert the
microSD card to SD/HCSD memory card
format.
3Double-click the USB icon ( ) on your
desktop to view the microSD contents.
4Double-click the VIDEO folder, then select
the sub-folder you want to open.
NOTE: The folders are named by the year,
month, and date. For example, a folder
named 02042013 means that the folder
was created in 2013, February (02), on
the 4th.
5Double-click the desired video file to begin
playback.
ENGLISH
27
1Press , then select Settings.
Select
Settings
To format memory card:
Select Yes to delete the chosen file or
folder or No to cancel.
4
Delete?
Yes No
Formatting Memory Card
The format function permanently erases
all saved picture and video files on the
microSD card (not included). Ensure that any
video and picture files you wish to keep are
backed up on your computer prior to formatting.
Move the joystick up and down to toggle
between files or folders.
2
VIDEO
PICTURE X
Highlight the file or folder you wish to
delete. Move the joystick to the right to
highlight the red “X“ and push the joystick
in.
NOTE: The VIDEO folder cannot be
deleted.
3
28
Using Power Saving Mode
1Press , then select Power Save.
Select
Power
Save
To enable power saving mode:
Select On to activate power saving mode or
or select Off to cancel.
2
2
Select
Format
Memory
Card
3
Select Yes
Power save mode is a battery-conserving
function that shuts off the monitor’s LCD display
if no sound is detected by your camera(s) for 2
minutes. When sound is detected, the display
turns back on.
ENGLISH
29
2
Select
Default
Settings
3
Select Yes
Restoring Default Settings
Restoring your video monitor returns any setting
changes to default settings.
NOTE: Restoring to default settings will not
delete saved video and picture files.
1Press , then select Settings.
Select
Settings
To restore to default settings:
30
Remotely Connecting to
Your Cameras
The Wi-Fi Cradle accessory allows you to
connect to your cameras from anywhere (model
#: ACCWIFI1, not included).
Use the Wi-Fi Cradle to:
tConnect to your cameras from anywhere
using your mobile phone (iOS & Android) or
computer (PC & Mac).
tRemotely connect to your system without
disrupting live viewing mode on your
monitor.
tProvide a secure, password-protected feed
for accessing your camera(s) remotely.
.
FPO - will be
picture of Wifi
Cradle
ENGLISH
31
For large screen viewing, you can connect the
video monitor to your television (RCA only) using
an optional 3.5mm to RCA adapter (model #:
ACCAVOUT1).
To view files on a television:
1Power on the television you will use to
view the baby monitor’s display.
2Connect the 3.5mm end of the adapter to
the monitor’s A/V out port.
Connect 3.5mm end
3Connect the RCA ends of the adapter to
audio and video inputs on your television.
Video from the baby monitor is
immediately displayed on your television.
NOTE: The monitor’s LCD display turns off
when using this feature.
4Turn on your TV to the correct input.
1Press , then select Settings.
Select
Settings
Using Audio / Video Out
To configure audio / video out:
NOTE: Only required if viewing on a PAL
television set.
32
3Select NTSC (North America) or PAL
(UK/Europe) and by pushing the joystick.
2
Select
Default
Settings
3.5” to RCA adapter
FPO
3.5” termination
RCA termination
ENGLISH
33
2
4Use the joystick to select the channel you
would like to pair the camera to.
1Place the camera and monitor next to each
other. Make sure the camera is turned on
and plugged in.
Press , then move the joystick left or
right to select SETUP.
Select
Setup
Select
Pairing
3
If a camera is already connected to
this channel, the new camera will
replace the existing camera.
Select a
channel
to pair the
camera to.
Pairing Additional Cameras
The camera(s) included have already been
paired with the monitor. If you have purchased
additional add-on cameras (model# BB311AC1 /
BB351AC1), OR if your monitor and camera are not
paired up, follow the steps below.
To pair a camera to your monitor:
34
5Press the PAIR button on the back of the
fixed camera or the bottom of the P/T
camera within 30 seconds of selecting the
pairing channel.
Press PAIR
Press PAIR
• Immediately move the camera away from the
monitor to avoid speaker feedback.
• The monitor can connect up to 4 cameras.
• The monitor can be used with a combination
of fixed and P/T cameras.
Notes
Live video from the camera is immediately
shown on the monitor once the camera is
successfully paired.
ENGLISH
35
36
Technical Specifications
Fixed Camera
Frequency 2.4GHz - 2.48GHz
Maximum Range Up to 450ft / 137m outdoors*
Up to 150ft / 46m indoors*
Image Sensor 1/6” Color Image Sensor
Lens 4.9mm F2.8
IR LED 8 pcs
Power Adapter 5.0V DC 1000mA
Weight 0.2lbs / 0.1kg
P/T Camera
Frequency 2.4GHz - 2.48GHz
Maximum Range Up to 450ft / 137m outdoors*
Up to 150ft / 46m indoors*
Image Sensor 1/6” Color Image Sensor
Lens 3.0mm F2.8
IR LED 10 pcs
Power Adapter 5.0V DC 1000mA
Weight 0.6lbs / 0.3kg
3.5” Monitor
Frequency 2.4GHz - 2.48GHz
Display 3.5” TFT Color LCD
Power Adapter 5.0V DC 1000mA
Battery Li-ion Rechargeable Battery 3.7V DC
???mAh
Battery Life Up to 5 hours in normal mode
Up to 8.5 hours in Video Off mode
Weight 0.4lbs / 0.2kg
4.3” Monitor
Frequency 2.4GHz - 2.48GHz
Display 4.3” TFT Color LCD
Power Adapter 5.0V DC 1000mA
Battery Li-ion Rechargeable Battery 3.7V DC
1500mAh
Battery Life Up to 4 hours in normal viewing mode
Up to 8 hours in Video Off mode
Weight 0.5lbs / 0.2kg
*Based on unobstructed line of sight. Actual range will vary
based on surroundings.
Fixed Camera
P/T Camera
4.3” Monitor
3.5” Monitor
3.2in
81mm
5.4in
137mm
1.1in
28mm
3.9in
99mm
5.9in
149mm
3.9in
99mm
3.2in
81mm
5.4in
137mm
1.1in
28mm
ENGLISH
37
2.4in
60mm
5.9in
149mm
2.9in
73mm
Unit Dimensions
38
Troubleshooting
Problem Solution
No video displayed on
the monitor tPress and hold the
button for 3 seconds to power
on the monitor.
tMonitor is out of batteries. Plug
in the monitor power adapter.
tVideo Off mode is on. Press
any button to turn the screen
back on.
tPower save mode is on. Press
any button to turn the screen
back on.
tIf none of the solutions above
work, press the Reset button on
the back of the monitor.
Monitor screen keeps
turning off
tThe monitor battery is low. Plug
in the monitor power adapter.
tPower save mode is on. Press
any button to turn the screen
back on.
The camera is not
detected; “Out of Range”
is shown on the monitor
tMake sure the camera is
powered on.
tThe camera and monitor may
be out of range. Extend the
antennas on the monitor and
camera or move the monitor
and camera closer together.
tYou may need to pair the
camera and the monitor
again. See “Pairing Additional
Cameras” on page 34 for
details.
tWrong channel selected.
Press repeatedly to select
a channel with a camera
connected to it.
Feedback / squealing
noise coming from the
monitor
tYour camera and monitor may
be too close to each other.
Move them further apart.
tLower the monitor volume.
Touch buttons on the
monitor aren’t working
tPress the Lock button ( ) on
the side of the monitor to unlock
the touch buttons.
Display is frozen tPress the Reset button on the
back of the monitor to reboot.
Settings and saved files are
unaffected.
Product Support is available 24/7 including product
information, user guides, quick start guides, and FAQ’s
Need Help?
ENGLISH
39
CLEANING
Clean the monitor and camera with a slightly damp cloth or an anti-
static cloth. Never use cleaning agents or abrasive solvents.
• Do not clean any part of the product with cleaners with thinners or
other solvents and chemicals. This may cause permanent damage
to the product, which is not covered by the Warranty. When
necessary, clean it with a damp cloth.
• Keep your camera and monitor away from hot, humid areas or
strong sunlight, and do not get it wet.
• Every effort has been made to ensure high standards of reliability
for your baby monitor. However, if something does go wrong,
please do not try to repair it yourself. Contact Customer Service for
assistance.
DISPOSAL OF THE DEVICE
At the end of the product life cycle, you should
not dispose of this product with normal household
waste, but take the product to a collection point for
the recycling of electrical and electronic equipment.
The symbol on the product, user’s guide, and/or
box indicates this.
Some of the product materials can be re-used if
you take them to a recycling point. By reusing some parts or raw
materials from used products you make an important contribution to
the protection of the environment.
Please contact your local authorities in case you need more information
on the collection points in your area. Dispose of the battery pack in an
environmentally-friendly manner according to your local regulations.
NOTICES
WARNING: Any changes or modifications not expressly approved
by the grantee of this device could void the user’s authority to operate
the device.
FCC NOTICE
This device complies with Part 15, subpart C, of the FCC Rules.
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
However, it is imperative that the user follows the guidelines in this
manual to avoid improper usage which may result in damage to the
unit, electrical shock and fire hazard injury.
CAUTION: To maintain compliance with the FCC’s RF exposure
guidelines, place the camera at least 20cm (7.87in) from nearby
persons.
CANADA/IC NOTICE
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired
operation of the device.
USER’S GUIDE
vii
It is imperative that the user follows the guidelines in this manual to avoid improper usage which may result in damage
to the product, electrical shock, and fire hazard injury. In order to improve the features, functions, and quality of this
product, the specifications are subject to change without notice from time to time.
WARNING
!
STRANGULATION HAZARD:
Infants have STRANGLED in power cords. Keep power
cords more than 3 feet away from cribs, bassinets, play
yards and other safe sleep environments for infants.
NOTICES
FCC Notice:
This equipment has been certified and found to
comply with the limits regulated by the FCC part 15,
subpart C. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception (which can be determined by
turning the equipment on and off), the user is
encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and
receiver
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected
• Consult the dealer or an experienced radio or
television technician for assistance
Warning:
To ensure compliance with the FCC’s RF exposure
guidelines, this equipment should be installed and
operated with minimum distance 20cm (7.87in)
between the radiator and nearby persons.
Industry Canada Notice:
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1)This
device may not cause harmful interference, and
(2) This device must accept any interference
received, including interference that may cause
undesirable operation.
This Class B digital apparatus complies with
Canadian ICES-003.
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
MODIFICATION:
Any changes or modifications not expressly
approved by the grantee of this device could void the
user's authority to operate the device.
Toute modification non approuvée explicitement par
le fournisseur de licence de l'appareil peut
entraîner l'annulation du droit de l'utilsateur à
utiliser l'appareil.
RoHS:
This product is fully compliant with the European
Union Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment
("RoHS") Directive (2002/95/EC). The RoHS directive
prohibits the sale of electronic equipment
containing certain hazardous substances such as
lead, cadmium, mercury, and hexavalent
chromium, PBB, and PBDE in the European Union.
Please see the label on your device for FCC/IC certification numbers.