RDI Technology RX210 WIRELESS RECEIVER User Manual CR3020 manual 900MHz

Download:
Mirror Download [FCC.gov]
Document ID	916885
Application ID	Vh9l0ys1sB24hFmD74vboA==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	68.38kB (854717 bits)
Date Submitted	2008-03-19 00:00:00
Date Available	2008-03-19 00:00:00
Creation Date	2007-06-15 11:20:46
Producing Software	pdfFactory Pro 2.10 (Windows XP Chinese)
Document Lastmod	2008-03-14 15:24:31
Document Title	CR3020 manual 900MHz.doc
Document Creator	pdfFactory Pro www.fineprint.com.cn
Document Author:	wily wu

Drilling Template for Wall Mounting Camera(s)///
For wall-mounting Camera (s), drill three holes using a 1/4” drill bit and the
template below. Insert supplied wall anchors into holes and secure Camera to
wall with supplied screws.
INDOOR/OUTDOOR
900MHz WIRELESS CAMERA SYSTEM
USINCLUDES: VIDEO/AUDIO CAMERA TRANSMITTER & MONITOR/RECEIVER
CR3020
USER’S GUIDE
Congratulations on your purchase of the 900MHz Wireless Color Camera
system. The system consists of a wireless A/V receiver and a wireless Camera,
an ideal product for application of covert monitoring, such as the porch,
watching the yard, pool, pets or the baby. It is also suited to small business
surveillance application.
FEATURES
• 900MHz wireless technology
• Color camera with night vision
• Both audio and video output
• Supports up to 2 cameras
• Manual or auto switching between cameras
• Adjustable cycle time between different channels
• AC power adaptor or battery operation
APPROVALS///
• Weatherproof construction( IP54 standard) for outdoor use
• WiFi interference free
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference,
SYSTEM CONTENTS
• Wireless A/V receiver
x1
• Wireless Camera with night vision
•Power adaptor
•Adaptor cable
x1
x2
x1
•Hardware kit
•Manual
x1
x1
and,
(2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC NOTE
The manufacturer is not responsible for any radio or TV interference caused by
authorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment.
WARRANTY///
This product has a one year manufacturer’s warranty which covers parts and
labor only. In the Unlikely event that you encounter a problem, the unit should
THINGS TO CONSIDER BEFORE INSTALLATION
For best performance, follow these simple guidelines:
• Camera(s) should be installed between 8 and 13 feet above the area to be
be returned to the place of purchase.
Interference on
camera picture
Audio problems
1. Make sure each camera (transmitter) is within
range, and that no large obstructions are blocking the
signal.
2. Try repositioning the camera, receiver or both to
improve the reception quality.
3. If a camera is positioned close to the receiver, point
antenna away from the receiver.
monitored
• The Camera should be aimed accordingly to optimize viewing area
• For best transmission, avoid installations where there are thick walls or major
obstructions between the Camera and Receiver
1. Ensure the volume is turned up sufficiently on the
TV.
2. Make sure the sound is within the microphone
range.
3. If the unit emits a loud wailing sound (feeds back),
try moving the camera away from the receiver or
angle the receiver differently.
wall mounting, use the hardware kit in the package. The Camera can be
adjusted for either mounting scenario by rotating the Camera to the required
position.
INSTALLING THE CAMERA (TRANSMITTER)
1. Unpack the Camera.
2. Decide whether the Camera will be wall-mounted or sit on a desk/table top. If
SPECIFICATIONS
Camera
TV System
PAL or NTSC
Resolution
360 horizontal TV Lines
Signal/Noise Ratio
48dB
High-Speed Electronic Shutter
1/60 - 1/15,000 sec
3. If using the 9V camera power adapter, just connect power jack. Make sure
Image Sensor
1/3” CMOS
Min. Illumination
0.1 lux
Current Consumption
150mA
the Camera is positioned no more than 5 1/2 feet from an AC power outlet.
4. Each camera’s channel number can be set by user, screw the lens part of
camera to open the lens cover, and then could set the camera’s channel
Overall Size
2.36"L×1.69" Diameter
Frequency
910MHz, 920MHz
Modulation
FM
Video Signal/Noise Ratio
48dB
Audio Signal/Noise Ratio
45dB
Case Finish
Metal Aluminum case, suited for indoor or
outdoor use
DESK TOP
WALL MOUNTING
number. After finish setting the channel, screw the lens cover on.
5. The Camera (Transmitter) installation is now complete.
Night Vision///
The Camera includes IR LEDs, which allows viewing up to 12 feet in the dark
when used with the adapter. It can automatically turn to night vision in low light.
SETTING UP THE RECEIVER
1. Connect one end of the cable to the back of the receiver, the another end
(RCA cord) to your television's A/V inputs, the yellow plug to the VIDEO IN
jack and the white plug to the AUDIO IN jack.
2. Plug the receiver power adapter into the 9V DC power jack on the back of
the receiver and plug the power adapter into any 120 V/240 V power outlet.
3. Place the receiver either on top or near to your TV. Rotate the antenna to a
cameras/transmitters assigned to them, set the DIP switches (located on the
rear panel of the receiver) for those corresponding channels to the OFF
position (up). When you have selected a channel with an active camera, that
video will appear on your TV screen.
vertical position.
OPTIMIZING THE WIRELESS CAMERA SYSTEM
The 900MHz video signals pass easily through your home’s interior walls, but
the signal may be reflected by power wires or plumbing inside the wall. Usually
a slight adjustment of the Receiver and/or Camera antenna will improve
reception. Take care not to force the antennas past their lock positions.
MULTI-CAMERA OPERATION
Our wireless 900MHz Camera system is designed to work with up to 2
Cameras. Additional Cameras are sold separately.
IMPORTANT: When using more than one Camera, please check channel
number on package, make sure it is exclusive to each camera. Accordingly
the dip switch located on the back of the Receiver should be adjusted to reflect
the channels in use.
OPERATING THE SYSTEM
Set your TV to monitor the VIDEO INPUT designated for the Receiver.
The receiver can support up to two different camera/transmitter signals. You
AUTO MODE
To have the receiver automatically rotate through the channels, press the
AUTO button on the top panel of the receiver. The receiver will continuously
scan through all channels which are ON. To avoid searching channels that do
not have cameras/transmitters assigned to them, set the DIP switches for those
corresponding channels to the OFF position. The monitor will display the
picture from one camera to the next. The dwell time (time taken to switch
between cameras) is preset to 4 seconds and can be adjusted between 2-30
seconds. To adjust the dwell time, press both the AUTO and MANUAL button
simultaneously. Each flash of the LED increases the dwell time by one second.
TROUBLE SHOOTING
If you are having trouble operating this product, please consult the guide
below:
SYMPTOM
can switch from one camera to the next either manually or automatically via
button on the top panel of the receiver.
No camera picture
MANUAL MODE
To select one of the two channels manually, press the MANUAL button on the
panel of the receiver.
The receiver will switch to a different channel (CAM1, CAM2) each time when
the MANUAL button is pressed. To avoid searching channels that do not have
Blank monitor
REMEDIES
1. Check all connectors. Make sure camera(s) and
receiver are switched ON.
2. Ensure camera(s) and receiver are set to correct
channel(s).
3. Make sure camera is within range of receiver.
1. Make sure receiver is switched ON.
2. If using AC adapter, make sure it is plugged in.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2007:06:15 11:20:46Z
Creator Tool                    : pdfFactory Pro www.fineprint.com.cn
Modify Date                     : 2008:03:14 15:24:31+08:00
Metadata Date                   : 2008:03:14 15:24:31+08:00
Format                          : application/pdf
Creator                         : wily wu
Title                           : CR3020 manual 900MHz.doc
Producer                        : pdfFactory Pro 2.10 (Windows XP Chinese)
Document ID                     : uuid:711c0436-bb81-4c58-9afd-1a47bfde77b2
Instance ID                     : uuid:57ae7755-c105-414e-a79b-fd16b26bea6e
Page Count                      : 4
Author                          : wily wu

EXIF Metadata provided by EXIF.tools