RDI Technology RX230 900MHz Wireless USB Receiver User Manual

RDI Technology (Shenzhen) Co., Ltd. 900MHz Wireless USB Receiver Users Manual

Users Manual

Download: RDI Technology RX230 900MHz Wireless USB Receiver User Manual
Mirror Download [FCC.gov]RDI Technology RX230 900MHz Wireless USB Receiver User Manual
Document ID1021449
Application IDaVh7TUDBXe40QBmIN5wruA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize39.17kB (489684 bits)
Date Submitted2008-10-27 00:00:00
Date Available2008-10-27 00:00:00
Creation Date2008-10-08 14:37:18
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2008-10-22 10:02:10
Document TitleMicrosoft Word - LW1001_LW1002_LW1010_LW1012_LW1020_LW1022_MANUAL_EN_R4.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: igershon

COLOR WIRELESS
SURVEILLANCE SYSTEM
WITH INDOOR / OUTDOOR
NIGHT VISION CAMERA(S)
Instruction Manual
English Version 4.0
MODELS:
LW1000 Series
www.lorexcctv.com
LW1000 Series includes: LW1001, LW1002, LW1010, LW1012, LW1020, and LW1022
Copyright © 2008 Lorex Technology Inc.
Thank you for purchasing the LW1000 Series Color Wireless Series Surveillance System. Lorex is
committed to providing our customers with a high quality, reliable security product.
http://www.lorexcctv.com
Wireless Disclaimer:
This product broadcasts over public airways and its video and audio signals may be intercepted without
your consent.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RICK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
products ‘ enclosure that may be of sufficient magnitude
to constitute a risk of electric shock
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF THE PLUG TO THE WIDE SLOT AND FULLY INSERT.
Please visit us on the web for the most current Manuals, Quick Start Guides and Firmware.
Additional Language Manuals are also available at:
http://www.lorexcctv.com
Important Safeguards
Important Safeguards
In addition to the careful attention devoted to quality standards in the manufacture process of your video
product, safety is a major factor in the design of every instrument. However, safety is your responsibility
too. This sheet lists important information that will help to assure your enjoyment and proper use of the
video product and accessory equipment. Please read them carefully before operating and using your
video product.
Installation
1.
Read and Follow Instructions - All the
safety and operating instructions should be
read before the video product is operated.
Follow all operating instructions.
2.
Retain Instructions - The safety and
operating instructions should be retained for
future reference.
3.
Heed Warnings - Comply with all warnings
on the video product and in the operating
instructions.
4.
Polarization - Do not defeat the safety
purpose of the polarized or grounding-type
plug.
o A polarized plug has two blades with
one wider than the other.
o A grounding type plug has two
blades and a third grounding prong.
o The wide blade or the third prong is
provided for your safety.
o If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet
5.
Power Sources - This video product should
be operated only from the type of power
source indicated on the marking label. If you
are not sure of the type of power supply to
your location, consult your video dealer or
local power company. For video products
intended to operate from battery power, or
other sources, refer to the operating
instructions.
6.
Overloading - Do not overload wall outlets of
extension cords as this can result in the risk
of fire or electric shock. Overloaded AC
outlets, extension cords, frayed power cords,
damaged or cracked wire insulation, and
broken plugs are dangerous. They may result
in a shock or fire hazard. Periodically examine
the cord, and if its appearance indicates
damage or deteriorated insulation, have it
replaced by your service technician.
7.
Power-Cord Protection - Power supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, paying
particular attention to cords at plugs,
convenience receptacles, and the point where
they exit from the video product.
8.
Ventilation - Slots and openings in the case
are provided for ventilation to ensure reliable
operation of the video product and to protect
it from overheating. These openings must not
be blocked or covered. The openings should
never be blocked by placing the video
equipment on a bed, sofa, rug, or other
similar surface. This video product should
never be placed near or over a radiator or
heat register. This video product should not
be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the video product manufacturer’s
instructions have been followed.
9.
Attachments - Do not use attachments
unless recommended by the video product
manufacturer as they may cause a hazard.
10. Water and Moisture - Do not place the
power cord for this video product in water.
Caution: Maintain electrical safety. Power line
operated
equipment
or
accessories
connected to this unit should bear the UL,
CUL, CSA, ETL or CETL Certification Mark
(for North America) or the CE Certification
Mark (for the European Union) on the
accessory itself and should not be modified
so as to defeat the safety features. This will
help avoid any potential hazard from electrical
shock or fire. If in doubt, contact qualified
service personnel.
11. Accessories - Do not place this video
equipment on an unstable cart, stand, tripod,
or table.
The video equipment may fall,
causing serious damage to the
video product. Use this video
product only with a cart, stand,
tripod,
bracket,
or
table
recommended
by
the
manufacturer or sold with the
video product.
Any mounting of the product should follow
the manufacturer’s instructions and use a
mounting accessory recommended by the
manufacturer.
Important Safeguards
Service
Use
13. Servicing - Do not attempt to service this
video equipment yourself as opening or
removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
19. Cleaning - Unplug the video product from the
wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
14. Conditions Requiring Service - Unplug this
video product from the wall outlet and refer
servicing to qualified service personnel under
the following conditions.
A. When the power supply cord or plug is
damaged.
B. If liquid has been spilled or objects have
fallen into the video product.
C. If the video product has been exposed to
rain or water.
D. If the video product does not operate
normally by following the operating
instructions. Adjust only those controls
that are covered by the operating
instructions. Improper adjustment of
other controls may result in damage and
will often require extensive work by a
qualified technician to restore the video
product to its normal operation.
E. If the video product has been dropped or
the cabinet has been damaged.
F. When the video product exhibits a
distinct change in performance. This
indicates a need for service.
15. Replacement Parts - When replacement
parts are required, have the service
technician verify that the replacements used
have the same safety characteristics as the
original parts. Use of replacements specified
by the video product manufacturer can
prevent fire, electric shock or other hazards.
16. Safety Check - Upon completion of any
service or repairs to this video product, ask
the service technician to perform safety
checks recommended by the manufacturer to
determine that the video product is in safe
operating condition.
17. Wall or Ceiling Mounting - The cameras
provided with this system should be mounted
to a wall or ceiling only as instructed in this
guide, using the provided mounting brackets.
18. Heat - The product should be situated away
from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat.
20. Product and Cart Combination - Video and
cart combination should be moved with care.
Quick stops, excessive force, and uneven
surfaces may cause the video product and
car combination to overturn
21. Object and Liquid Entry - Never push
objects for any kind into this video product
through openings as they may touch
dangerous voltage points or “short-out” parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the video
product
22. Lightning - For added protection for this
video product during a lightning storm, or
when it is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system.
This will prevent damage to the video product
due to lightning and power line surges. The
manufacturer’s instructions and use a
mounting accessory recommended by the
manufacturer.
General Precautions
General Precautions
1. All warnings and instructions of this manual should be followed
2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water
dampened cloth for cleaning
3. Do not use this unit in extremely humid or wet places (i.e. Restaurant Kitchen, inside a Sauna, etc.)
4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should
not be blocked
5. During lightning storms, or when the unit is not used for a long time, disconnect the power supply,
antenna, and cables to protect the unit from electrical surge
FCC CLASS B NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
that may cause undesired operation.
FCC NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Features
Features
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
‘EWT’ Eliminates Interference From Most Household Devices
Fast & Easy Installation- Plug Into any AC Outlet
Receiver Connects to any TV/VCR/DVD Recorder
Indoor / Outdoor Night Vision Camera
Built-in Microphone for Listening Ability
Camera can be Battery Operated
Up to 300ft Wireless Transmission Range*
Night Vision Allows for Low Light Viewing.
Receiver Automatically Switches View Between Cameras**
Desktop or Wall Mountable
RCA Audio/Video Connector
A USB Port to view camera on a PC or remotely through a web browser. ***
* Maximum open space transmission range. The actual range is dependent upon building materials and other
obstructions in path of wireless signal.
nd
** LW1001, LW1010, LW1020 requires a 2 Camera
*** USB Port and Yoics ONLY apply to LW1020 and LW1022 Models.
Table of Contents
Important Safeguards.................................................................................................................................... 3
General Precautions ..................................................................................................................................... 5
Features ........................................................................................................................................................ 5
Table of Contents.......................................................................................................................................... 6
Getting Started .............................................................................................................................................. 7
Wireless Receiver ......................................................................................................................................... 7
Control Buttons ............................................................................................................................................. 9
Wireless Receiver Installation ....................................................................................................................... 9
Camera Installation ..................................................................................................................................... 10
Connecting Camera Power ......................................................................................................................... 13
Troubleshooting .......................................................................................................................................... 15
Appendix #1 - Receiver Specifications ....................................................................................................... 16
Appendix #2 - Camera Specifications......................................................................................................... 16
Getting Started
Getting Started
The LW1001 and LW1002 come with the following components:
1 x WIRELESS RECEIVER
1 x POWER ADAPTOR
(FOR RECEIVER)
WIRELESS CAMERA *
POWER ADAPTOR (FOR
CAMERA) *
CAMERA BATTERY
ADAPTOR CABLE *
1 x RCA VIDEO CABLE
The LW1010, LW1012, LW1020, and LW1022 come with the following components:
1 x WIRELESS RECEIVER
WIRELESS CAMERA *
1 x POWER ADAPTOR CAMERA BATTERY
(FOR RECEIVER)
ADAPTOR CABLE *
POWER ADAPTOR (FOR
CAMERA) *
1 x RCA
VIDEO CABLE
Quantity of contents for each model is as follows:
Model
* Wireless
* Power Adaptor
Camera
(for Camera)
LW1001
LW1002
LW1010
LW1012
LW1020
LW1022
1 x USB CABLE **
* Camera Battery
Adaptor Cable
** USB Cable
N/A
N/A
N/A
N/A
CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED ALL COMPONENTS AS LISTED ON THE BOX.
* PACKAGE CONTENTS WILL VARY BY SPECIFIC MODEL. PLEASE REFER TO THE PACKAGE FOR CONTENT
DETAILS.
Wireless Receiver
Wireless Receiver
NOTE: The USB Port is
ONLY on the LW1020 and
LW1022 Models.
1. DC 9V (5V for LW1020/LW1022)
INPUT – Connection port for the 9V/5V
Power Adaptor (provided with this
system). Connect the Power Adaptor to
a power source.
NOTE: It is recommended that the
receiver be connected to a surge bar or
similar to protect the equipment from
damage.
2. USB Port (ONLY on the LW1020 and LW1022 Models)
The USB Port enables the receiver to be connected to a computer (not included) with internet access.
Yoics (software included) allows the camera(s) to be viewed on any other
computer with an internet connection.
NOTE: Please refer to the Quick Start Guide that is provided with your package on how to
install Yoics. For additional Yoics information or advanced Yoics user options, Please visit the
website at www.yoics.com
3. CAMERA CONNECTION DIP SWITCHES - Use the DIP Switches to switch a camera to a specific
channel. These switches are set to default positions (based on Model Number).
Please do not adjust these switches without first consulting technical support.
CAM1 ON
CAM2 OFF
CAM1 OFF
CAM2 ON
CAM1 ON
CAM2 OFF
CAM1 ON
CAM2 ON
NOTE: The White
squares represent the
switch location
4. AV OUT – Connect the provided AV Cable to the Receiver. Connect the Audio and Video ends of the
cable to a TV, VCR or other viewing device.
Control Buttons
Control Buttons
1. AUTO BUTTON – When the receiver is set to AUTO Mode, it will continuously switch between
connected cameras. The dwell time is set to 4 seconds per camera (by default), however this can be
adjusted to 2~30 seconds.
•
•
LW1001/ LW1002/ LW1010 /LW1012: To adjust the dwell time, press
and hold both the AUTO and MANUAL buttons at the same time – this
will produce beeps indicating one second increments. Once the
desired dwell time has been reached, release the buttons.
LW1020/LW1022: To adjust the dwell time, press and hold both the
AUTO and MANUAL buttons at the same time. Hold both buttons
pressed for the amount of time the dwell time needs to be set to.
Once the desired dwell time is reached, release both buttons and the
indicator light on the receiver will show the dwell time by blinking 1
time for each second of dwell time
LW1001 and LW1002
2. MANUAL BUTTON – Press the MANUAL button to switch between
available cameras manually. The Receiver will switch to a different camera (if
available and configured) each time the MANUAL button is pressed.
Wireless Receiver Installation
LW1010, LW1012,
LW1020, and LW1022
Installing the wireless receiver (for LW1001, LW1002, LW1010, LW1012, LW1020, and LW1022)
For connecting to a TV/monitor  recording on a VCR/DVD recorder.
1. Connect the AV Cable to the back of the receiver. Connect the other end of the Cable to the
Video IN (Yellow) and Audio IN (White) ports on the TV, VCR or other viewing/recording devices
with RCA inputs.
2. Plug the Receiver power cable into the 9V POWER input (5V for LW1020/LW1022). Plug the
power cable into a wall outlet.
3. Place the receiver in a place that will have clear reception to your camera(s). Try to avoid placing
the receiver near other 900MHz devices (such as older cordless phones, wireless headphones,
etc.).
NOTE: Do not force the antennas past their locked positions, or damage may occur to the
Receiver or Camera.
Installing the wireless receiver (for LW1020 and LW1022 ONLY)
For viewing on your PC  remotely through a web browser.
4. Connect one end of the USB Cable into the Receiver and the other end into a computer. Please
refer to the Quick Start Guide to install the driver and Yoics. For additional Yoics information or
advanced Yoics user options, Please visit the
website at www.yoics.com
Camera Installation
Camera Installation
Before you install the camera(s), carefully plan where and how it will be positioned, and where you will
route the cable that connects the camera to the power adaptor or battery adaptor.
Installation Warnings:
•
•
•
•
•
Aim the Cameras to best optimize the viewing area: Select a location for the camera that provides
a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to
a strong light source or direct sunlight.
Avoid installing the cameras where there are thick walls, obstructions, or interference (i.e.
cement, concrete, metal, transformers, or other electrical equipment) between the Cameras and
the Receiver. This will reduce the transmission range.
Select a location for the camera that has an ambient temperature between 14°F~113°F
(-10°C~45°C)
Before starting permanent installation, have another person hold the camera for you while you
verify its performance by observing the image on a monitor.
Audio feedback may occur when the receiver and camera(s) are too close (under 10 feet /3
meters.
Night Vision
This camera includes IR LEDs, which provide the camera with the ability to view images in low light
conditions. It is important to use the provided power adaptor (not the 9V DC Battery Adaptor) when using
the camera for prolonged periods in low light conditions, as the LEDs will drain the battery more quickly
than regular daytime use.
Multi CAMERA OPERATION
This 900MHz Wireless Color Camera System can support a total of 2 cameras (additional camera is sold
separately). When using multiple cameras, set each camera to different channels. The Receiver needs to
be set to have 2 cameras switched to ON, to have all attached cameras functioning simultaneously.
NOTE: The LW1001, LW1010, and LW1020 are expandable.
To order additional cameras please visit our website at www.lorexcctv.com
10
Camera Installation
Installing the Camera:
1. Carefully unpack the Camera.
2. Decide whether the camera will be permanently wall mounted or sit on a
tabletop:
• If you decide to place the camera on a tabletop or other flat surface,
the camera can easily be moved to different locations as desired. It is
strongly recommended that the camera be affixed to the table top
surface to prevent damage to the camera in case of tabletop surface
movement or improper handling.
• If you decide to permanently mount the camera to a wall, make sure to
select a location close to a power outlet.
NOTE: Wireless cameras require a power source (either an electrical
outlet or battery power) to operate. If you plan to permanently mount the
camera in a location, it is recommended to use the included Camera
Power adaptor to prevent interruptions in the image, as the battery adaptor
is intended as a temporary power solution.
Table Top Mount:
The Camera can be
placed on any flat
surface.
Wall Mounting Instructions (for the LW1001 and LW1002 ONLY)
To mount the camera to a wall:
1. Measure and mark the positions for the 2 screw holes on
the wall with a 0.90” space in between the 2 marks.
2. For Drywall:
• Drill the 2 holes (1/4” drill bit) and insert the
drywall plugs as needed.
0.90”
3.
Screw in both screws until the base of both screw heads
are roughly 3mm from the wall.
4. Slide the base of the camera onto the screw heads.
NOTE: If the base is not flush with the wall: Remove the base from the screw heads,
and adjust the depth of the screws until the camera base is flush with the wall.
5.
Adjust Camera to the desired angle. If desired gently
tighten the screw on the neck of the camera until
snug.
11
Wall Mounting Instructions (for the LW1010, LW1012, LW1020, LW1022 ONLY)
To mount the camera to a wall:
1. Loosen the screw located on the side of
the camera base using a slot head
screwdriver.
2. Pull the camera free from the Stand.
Mount the stand to the wall:
• Mark the position of the two
screw holes on the wall.
• Drill holes and insert the drywall plugs as
needed.
• Position the power cable through either slot
on the top or bottom of the stand as desired.
• Firmly attach the stand to the wall using the
provided screws.
NOTE: Do not allow the camera to come in contact
with other objects while it is detached from the stand,
as this may cause damage to the camera.
12
4
4. Insert the Camera into the top slot of the stand.
5. Point the camera in the desired position. Tighten the side screw to
secure the camera to the Stand.
6. Adjust the angle of the camera for a desired view.
Connecting Camera Power
The Camera can be powered either by using the provided Power Adaptor, or using a 9v battery (not
included) and the Battery Adaptor Cable:
•
•
POWER ADAPTOR: Connect the Power Adaptor to the Camera.
BATTERY: Connect the battery adaptor cable to the camera. Connect a 9 Volt Battery to the
adaptor cable (NOTE: A new 9V Battery should last for approximately 4 hours without the IR
LEDs in use).
13
NOTE: Wireless cameras require a power source (either an electrical outlet or battery power) to
operate. If you plan to permanently mount the camera in a location, it is recommended to use the
included Camera Power adaptor to prevent interruptions in the image, as the battery adaptor is
intended as a temporary power solution.
Power Adaptor:
Connect the Power
Adaptor to the Female
Barrel Power
termination on the
camera.
14
Battery: Connect the
Camera Battery Adaptor
cable to the Female
Barrel Power termination
on the camera. Connect
a battery to the
connector.
Troubleshooting
Troubleshooting
If you have problems with your System, there is often a quick and simple solution. Please try the
following:
Problem
Solution
(for LW1001, LW1002, LW1010,
LW1012, LW1020, and LW1022)
(for LW1001, LW1002, LW1010, LW1012, LW1020, and LW1022)
There is no picture from a Camera.
•
•
•
•
•
There is Interference with the
Camera Picture.
•
•
There are problems with the Audio.
•
•
•
Check all connections to the Camera. Make sure the
adaptor is plugged in.
Make sure that the Cameras and Receiver are both ON.
Make sure that the receiver is set to search for the
Camera (using the DIP Switch settings).
Make sure that the camera is in range of the Receiver.
If using the battery adaptor, try replacing the 9V Battery
Make sure that each camera (transmitter) is within
range, and that there are no large obstructions or
interference (i.e. older cordless phones on the 900MHz
Frequency).
Try repositioning the camera, receiver or both to
improve the reception.
Ensure that the volume on the TV is ON
Make sure that the sound is occurring within range of
the Camera Microphone
If the unit emits a loud screeching noise (feedback),
move the camera or receiver farther apart.
Problem
Solution
(for LW1020 and LW1022 Only)
(for LW1020 and LW1022 Only)
There is no image when the
Receiver is connected to the
computer using the USB Cable.
•
•
•
•
Yoics cannot find my camera, or
other problems with the Yoics
software.
•
•
•
The 2nd camera is not showing up
on Yoics.
•
Unplug and then plug in the Receiver.
If the computer prompts you for a device driver, install
the provided driver that is located on the CD (included).
If the driver was installed and XP or Vista is still giving
this prompt, please go to www.lorexcctv.com for
customer service options.
Run Windows Update to obtain the latest fixes for
Windows. When update is complete, plug in the receiver
to see whether this solved the issue.
Ensure the computer is operating on Windows XP or
Windows Vista. Other Operating Systems are not
supported..
Ensure the driver is properly installed.
Ensure only 1 camera is connected through USB.
Please visit the Yoics website at www.yoics.com for all
technical problems.
There can only be 1 camera shown at a time using
Yoics, and there is no feature to switch between
channels with Yoics. To change channels, press the
MANUAL button on the receiver.
15
Appendix #1 - Receiver Specifications
Appendix #1 - Receiver Specifications
Feature
Specification
LW1001 / LW1002
Specification
LW1010 / LW1012
Specification
LW1020 / LW1022
Frequency
902MHz ~ 928MHz
902MHz ~ 928MHz
902MHz ~ 928MHz
48dB
48dB
48dB
-10°C ~ 40°C
-10°C ~ 40°C
-10°C ~ 40°C
RCA Audio / Video
RCA Audio / Video
RCA Audio / Video
/ USB
Less than 85%
Less than 85%
Less than 85%
Approx. 100mA
Approx. 80mA
Approx. 250mA
3.25” x 1.0” x 5.0”
2.5” x 3.4” x 0.5”
2.5” x 3.4” x 0.5”
Signal /
Noise Ratio
Operating
Temperature
Output
Humidity
Current
Consumption
Overall Size
(W x H x L)
Appendix #2 - Camera Specifications
Specification
LW1001 / LW1002
Specification
LW1010 / LW1012
Specification
LW1020 / LW1022
TV System
NTSC
NTSC
NTSC
Resolution
360 Horizontal TV
Lines
360 Horizontal TV
Lines
360 Horizontal TV
Lines
1/60~1/15,000 sec
1/60~1/15,000 sec
1/60~1/15,000 sec
1/4” CMOS
1/3” CMOS
1/3” CMOS
0.1 LUX
0.1 LUX
0.1 LUX
160mA MAX
(with IR LED)
220mA MAX
(with IR LED)
220mA MAX
(with IR LED)
3.2” x 1.8”
2.36” x 1.69”
2.36” x 1.69”
Frequency
902MHz ~ 928MHz
902MHz ~ 928MHz
902MHz ~ 928MHz
Modulation
FM
FM
FM
48 dB
48 dB
48 dB
56 dB
56 dB
56 dB
ABS Plastic case,
suited for indoor or
outdoor use
Metal Aluminum
case, suited for
indoor or outdoor use
Metal Aluminum
case, suited for
indoor or outdoor use
Feature
High-Speed
Electronic
Shutter
Image
Sensor
Minimum
Illumination
Current
Consumption
Overall Size
(H x D)
Video Signal
/ Noise Ratio
Audio Signal
/ Noise Ratio
Case Finish
16
17

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 17
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:f4f30fac-438e-46e3-9971-725707559495
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2008:10:08 14:37:18-04:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:10:22 10:02:10+08:00
Metadata Date                   : 2008:10:22 10:02:10+08:00
Document ID                     : uuid:75cd2e48-0cf5-4969-8e2d-2551758fd300
Instance ID                     : uuid:c3393939-3930-46d5-8a9b-94d79466fd7a
Format                          : application/pdf
Creator                         : igershon
Title                           : Microsoft Word - LW1001_LW1002_LW1010_LW1012_LW1020_LW1022_MANUAL_EN_R4.doc
Author                          : igershon
EXIF Metadata provided by EXIF.tools
FCC ID Filing: SJ8RX230

Navigation menu