RDI Technology XWS150D-S WIRELESS DOOR SENSOR User Manual XWS15D S

Download:
Mirror Download [FCC.gov]
Document ID	868507
Application ID	b8B8vVTAbQswCQfJERDabg==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	234.12kB (2926466 bits)
Date Submitted	2007-11-14 00:00:00
Date Available	2007-11-14 00:00:00
Creation Date	2007-11-07 14:30:38
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-11-07 14:30:38
Document Title	Microsoft Word - XWS15D-S User Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	owner

Introduction
Congratulations on your purchase of the XANBOO homesight™ Wireless Door/Window Sensor. The Door/Window
Sensor uses a magnetic field to enable you to monitor the opening or closing of a door, window, cabinet, or whatever
else needs to be checked for movement. This Quick Start Guide describes how to set up and troubleshoot your
Door/Window Sensor.
Controlling Your Sensor
Using your computer and the Wireless System Controller, you locally manage your home environment with the
XANBOO homesight software. When configured, the system can notify you of any new events by sending an e-mail
when your Door/Window Sensor detects an event. An event is defined as the opening or closing of a
door/window/cabinet, etc.
How It Works
The sensor monitors the status of the magnetic contact. When a
change is detected with an opening or closing of a monitored door
or window, the sensor sends a notice of the event to your Wireless
System Controller, if enabled in Event Setup. The example shows
a Door/Window Sensor that has
been triggered when the door opens.
Installation Overview
Your package contains the following:
Installing your sensor is a simple process.
1. Insert the batteries. On the bottom of the sensor, slide open the door and
insert two AAA alkaline batteries. The back of the battery door of the sensor
indicates the polarity (+ and -) of the batteries. Close the door after inserting
batteries.
2.
Register your sensor with your Wireless System Controller using a process called Discovery. Refer to your
homesight Software User Guide for instructions on how to discover your Wireless Door/Window Sensor.
Remark:
Antenna is permanently attached or has a unique connector
Feature Locator
Installation Hints
Please consider the following points when mounting the sensor:
The XANBOO homesight Door/Window Sensor is constructed of UV resistant ABS plastic allowing for indoor
or outdoor use.
The homesight Wireless Door/Window Sensor is constructed of UV-resistant ABS plastic. If installing the
Wireless Door/Window Sensor outside, it should be shielded from the elements, such as underneath a porch roof.
Do not install the sensor where it is subjected directly to the elements.
Typically, the sensor's wireless reception is good to up to 250 feet from the Wireless System Controller,
depending on indoor or outdoor use and the number of obstacles. These can include metal framing, thick walls,
and other wireless devices operating at 418 MHz. It is recommended that different positions be tried for optimal
results.
Installing Your Door/Window Sensor
The spacing between the sensor and the contact should be between 1/10 inch and ½ inch (.25 cm to 1.27 cm).
Mount Your Door/Window Sensor
Discover your sensor before mounting it.
1.
Mount Your Door/Window Sensor
You can also mount the sensor more securely using the screws in the hardware kit.
Using the drilling template found later in this guide, drill two pilot holes for the screws.
Affix the screws to one side of the object (typically the "stationary" side) leaving 1/16"
(1.6 mm) space between the screw head and the object. Mount the sensor onto the
screws and slide down to lock into place.
2. Using the holes on the drilling template, mark the position of the holes to be drilled. For drywall or other
composite surfaces use a 7/ 32" drill bit. Drill a hole for each of the mounting screws and insert a plastic wall anchor
into each hole. For other solid surfaces use a 1/16" drill bit. Drill a pilot hole for each of the mounting screws.
Warning, when mounting near a window, drilling too close to the glass could break the glass and possibly cause it to
shatter. The window extends deeper into the frame than can be seen; therefore, ensure your screw is beyond the glass
before drilling.
3. The magnetic contact should now be placed on the other side of the object (typically the contact is installed on the
side that
Install the Magnetic Contact
1. Either peels the paper strip from the double-sided tape located on the back of the contact, or you can more
securely attach it using screws in the hardware kit. Remove the cover from the contact and insert the screws through
the holes on the top and bottom of the contact. Use the Wall Mounting Drilling template at the end of this guide to
assist you.
2.
Make sure the magnetic contact aligns with the top of the sensor on either the
left or right side.
Features and Specifications
Device signal communication
Attaches to any flat non-metal surface
Operates on 2-AAA Alkaline batteries
LED indicator when sensor is triggered
Frequency Range: 418 MHz
Typical Range Open air (line of sight):
200 feet (60 m)
Typical Range Indoors:
60 feet
Sensor size:
(18 m)
3.43"L × 1.61"W × 0.59"H (87mm × 41mm × 15mm)
Wall Mount Drilling Template
Mounting tools: Screwdriver, electric drill or awl. On hard surfaces, XANBOO recommends that you pre-drill ½-inch
deep pilot holes with a drill bit slightly smaller than the bracket mounting screws before securing the bracket to the
surface. When mounting a sensor on soft surfaces like sheetrock, use an awl to punch holes in the material slightly
smaller than the plastic anchors included in the hardware mounting kit.
The illustration is drawn to a one-to-one scale, which means that it provides the exact dimensions required to mount
the unit.
Troubleshooting
Problem
LED does not light up
Wireless System Controller does not recognize the sensor during discovery
Events are not triggered
Sensor continually sends an event
Solution
Ensure the batteries are properly inserted with the correct polarity.
Ensure you are using new AAA batteries.
Ensure sensor is powered. Position the sensor in closer proximity to your Wireless System Controller and try again.
Ensure there are no other wireless devices interfering with the sensor. The sensor transmits on the 418 MHz frequency.
Is the sensor registered with your Wireless System Controller?
Ensure that you have the proper settings configured for the sensor
Ensure that you have the proper settings configured for the sensor. For example, you have armed the sensor.
The sensor can be configured so that it can send an event when the contacts are closed or when they are opened.
FAQ
How far away can the sensor be placed from my Wireless System Controller?
Typically 60 feet (18 m).
Can I place the sensor in a different room than my Wireless System Controller?
Yes, the sensor and Wireless System Controller use radio frequencies to communicate with each other. These
frequencies can go through objects like walls, ceilings and floors.
How long will the battery last?
The battery is expected to last up to 12 months. This depends on actual use and how often the sensor is triggered. The
XANBOO Door/Window Sensor includes a battery saving feature that causes the sensor to hibernate when there is no
activity, and wakes-up when the sensor is triggered. Do not use rechargeable batteries.
How many sensors can I register with my Wireless System Controller?
The Wireless System Controller supports up to 16 sensors.
The light on the sensor is not on?
This indicates that the sensor has gone into hibernation mode. It wakes up when the sensor is triggered.
Regulatory Information
CAUTION: Changes or modifications not expressly approved by XANBOO for compliance could void the user’s
authority to operate the equipment.
FCC Compliance Class B Digital Device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Declaration of Conformity
XANBOO, Inc., Connected Home Solutions, 101 Tournament Drive, Horsham, PA 19044, 1-215-323-1000, declares
under sole responsibility that the HMVC3075 complies with 47 CFR Parts 2 and 15 of the FCC Rules as Class B
digital devices.
Industry Canada ICES-003 Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Restrictions on Use of Wireless Devices
In some situations or environments, the use of wireless devices may be restricted by the proprietor of the building or
responsible representatives of the organization. If you are uncertain of the applicable policy for the use of wireless
equipment in a specific organization or environment, you are encouraged to ask for authorization to use the device
prior to turning on the equipment.
FCC Certification
This product contains a radio transmitter and accordingly has been certified as compliant with 47 CFR Part 15 of the
FCC Rules for intentional radiators. Products that contain a radio transmitter are labeled with FCC ID and the FCC
logo.
This device complies with Part 15 of FCC Rules. Operation of the device is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference that may cause
undesired operation.
FCC NOTE:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user's authority to operate the equipment.
Limited Warranty
Wireless Door/Window Sensor
XANBOO, Inc., Connected Home Solutions ("XANBOO")
Limited Warranty. XANBOO warrants to you, the original end user customer, that (A) the Product, excluding
Software, will be materially free from defects in materials and workmanship under normal use, and (B) with respect to
Software, (i) the media on which the Software is provided will be free from defects in material and workmanship
under normal use, and (ii) the Software will perform materially as described in its documentation. This Limited
Warranty to you, the original end user customer, continues (A) for Software and the media upon which it is provided,
for a period of ninety (90) days from the date of purchase from XANBOO or an authorized XANBOO reseller, and (B)
for the Product (excluding Software), for a period of one (1) year from the date of purchase from XANBOO or from
an authorized XANBOO reseller. To take advantage of this Limited Warranty or to obtain technical support, you must
call the XANBOO toll-free phone number (below). XANBOO’s sole and exclusive obligation under this Limited
Warranty for retail sales shall be to repair or replace any Product or Software that does not meet this Limited Warranty.
All warranty claims must be made within the applicable Warranty Period.
General Information. The warranties described in this Section shall not apply: (i) to any Product subjected to
accident, misuse, neglect, alteration, Acts of God, improper handling, improper transport, improper storage, improper
use or application, improper installation, improper testing or unauthorized repair; or (ii) to cosmetic problems or
defects which result from normal wear and tear under ordinary use, and do not affect the performance or use of the
Product. XANBOO’s warranties apply only to a Product that is manufactured by XANBOO and identified by
XANBOO owned trademark, trade name or product identification logos affixed to the Product. XANBOO does not
warrant to you, the end user, or to anyone else that the Software will perform error free or without bugs. XANBOO IS
NOT RESPONSIBLE FOR, AND PROVIDES “AS IS” ANY SOFTWARE SUPPLIED BY 3RD PARTIES. EXCEPT
AS EXPRESSLY STATED IN THIS SECTION (“WARRANTY INFORMATION”), THERE ARE NO
WARRANTIES OF ANY KIND RELATING TO THE PRODUCT, EXPRESS, IMPLIED OR STATUTORY,
INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR THE WARRANTY AGAINST INFRINGEMENT PROVIDED IN THE UNIFORM
COMMERCIAL CODE. Some states do not allow for the exclusion of implied warranties, so the above exclusion
may not apply to you.
What additional provisions should I be aware of? Because it is impossible for XANBOO to know the purposes for
which you acquired this Product or the uses to which you will put this Product, you assume full responsibility for the
selection of the Product for its installation and use. While every reasonable effort has been made to insure that you
will receive a Product that you can use and enjoy, XANBOO does not warrant that the functions of the Product will
meet your requirements or that the operation of the Product will be uninterrupted or error-free. XANBOO IS NOT
RESPONSIBLE FOR PROBLEMS OR DAMAGE CAUSED BY THE INTERACTION OF THE PRODUCT WITH
ANY OTHER SOFTWARE OR HARDWARE. ALL WARRANTIES ARE VOID IF THE PRODUCT IS OPENED,
ALTERED, AND/OR DAMAGED.
THESE ARE YOUR SOLE AND EXCLUSIVE REMEDIES for any and all claims that you may have arising out of
or in connection with this Product, whether made or suffered by you or another person and whether based in contract
or tort.
THIS PRODUCT IS INTENDED ONLY FOR USE TO FACILITATE HOME MONITORING AND CONTROL
AND IS NOT INTENDED TO BE A SUBSTITUTE FOR A HOME SECURITY SYSTEM. XANBOO HEREBY
DISCLAIMS ANY LIABILITY WHATSOEVER THAT MAY ARISE FROM THE USE OR INABILITY TO USE
THIS PRODUCT AS A HOME SECURITY SYSTEM. IN NO EVENT SHALL XANBOO BE LIABLE TO YOU
OR ANY OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL, SPECIAL, INCIDENTAL,
CONSEQUENTIAL, EXEMPLARY OR OTHER DAMAGES ARISING OUT OF THE USE OR INABILITY TO
USE THE PRODUCT (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR INJURY, LOSS OF PROPERTY,
BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION OR ANY OTHER PECUNIARY
LOSS), OR FROM ANY BREACH OF WARRANTY, EVEN IF XANBOO HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN NO CASE SHALL XANBOO’S LIABILITY EXCEED THE AMOUNT
YOU PAID FOR THE PRODUCT.
THIS PRODUCT EMPLOYS WIRELESS TECHNOLOGY AND, IN SOME CASES, MAY FACILITATE
TRANSMISSION OF DATA OR VIDEO OVER THE INTERNET IN CONNECTION WITH ITS USE. THE
CUSTOMER SHOULD UNDERSTAND THAT ALL WIRELESS TRANSMISSIONS MAY BE SUBJECT TO
INTERCEPTION AND THAT DATA TRANSMISSION OVER THE INTERNET CANNOT BE GUARANTEED
TO BE 100% SECURE. AS A RESULT, XANBOO CANNOT ENSURE OR WARRANT THE SECURITY OF ANY
VIDEO OR DATA TRANSMITTED BY OR THROUGH THIS PRODUCT, WHETHER OR NOT TRANSMITTED
VIA THE INTERNET, AND THE CUSTOMER USES SUCH PRODUCT AT HIS OR HER OWN RISK.
These matters are governed by the laws of the Commonwealth of Pennsylvania, without regard to conflict of laws
principles and excluding the provisions of the United Nations Convention on Contracts for the International Sale of
Goods.
Please call the XANBOO toll-free number, 1-877-466-8646, for technical support or warranty service.
Battery Life
or your XANBOO homesight™ devices that require batteries, use high-quality, non-corrosive batteries designed for
use in electronic equipment. Battery life is one year with normal usage. Do not use rechargeable batteries in any
XANBOO homesight™ device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2007:11:07 14:30:38+08:00
Create Date                     : 2007:11:07 14:30:38+08:00
Format                          : application/pdf
Title                           : Microsoft Word - XWS15D-S User Manual.doc
Creator                         : owner
Document ID                     : uuid:ebc676c6-1188-4dd0-bc51-382bcb55630e
Instance ID                     : uuid:20ecffc7-d717-41f9-8121-95c825bf73d9
Page Count                      : 6
Author                          : owner

EXIF Metadata provided by EXIF.tools