RELM WIRELESS BK RADIO KNGP150 VHF HANDHELD TRANSCEIVER User Manual

RELM WIRELESS CORP. - BK RADIO VHF HANDHELD TRANSCEIVER

Contents

User Manual

ContentsIntroduction.....................................................................................1FCC Requirements .........................................................................1Industry Canada Compliance........................................................2Safety Precautions .........................................................................4Information and Options ...............................................................7Battery Installation and Removal .................................................8Battery Care and Maintenance ....................................................9Antenna Installation and Removal ...............................................9Radio Controls ..............................................................................10LCD Display ...................................................................................11Status Indicators ..........................................................................11Alphanumeric Label Options ........................................................12Programmable Switch and Button Functions ...........................13Options and Labels .......................................................................14Channel/Zone Selection Options ................................................17Channel/Zone Selector Knob ........................................................17Button/Menu Item Selection ..........................................................17Direct Keypad Entry ......................................................................17Using Knob and Button Operations Together ...............................18Basic Radio Operation .................................................................18Command Zone Operation ..........................................................19Building a Command Zone [CHAN+] ............................................19Editing a Command Zone [CHAN-] ...............................................19Code Guard/NAC Operation ........................................................20Code Guard Receive.....................................................................20Code Guard Transmit ....................................................................20
Analog Squelch Control ................................................................20APCO Project 25 Digital Squelch Control .....................................21Mixed Mode Operation .................................................................22Trunking Channel Basic Operation ............................................23Scan Options ................................................................................24Channel Scan [SCAN] ..................................................................24Channel Scan List [SCN+] ............................................................25Talkback Scan ...............................................................................25Vote Scan [Requires Option KZA0581].........................................25Dual Mode Scan [DSCN] ..............................................................26Enhanced Scan [ESCN] ................................................................26Priority Scan [PSCN] ....................................................................26Priority Channel Select [PRI] ........................................................27Zone Scan [ZSCN] ........................................................................28Zone Scan List [ZSC+] ..................................................................28Pick List Options ..........................................................................29TX/RX CxCSS Picklist [TXCG] [RXCG] .......................................29TX/RX Network Access Code Picklist [TNAC] [RNAC] ................29Talk Group ID Picklist [TGID] ........................................................30Encryption Key Picklist [KEY] .......................................................30Keyset Picklist [KSET] ...................................................................30Unit-to-Unit Call Options .............................................................31Emergency Signaling Options ....................................................33Encryption Operation ..................................................................34Required Setup .............................................................................34Basic Operation.............................................................................34Transmit Secure [SEC] ..................................................................35Transmit Encryption Key Selection [KEY] .....................................35User Selectable Encryption Keyset [KEYST] ................................35Rekey Request [RKEY] .................................................................36Keyset Viewing and Selecting [KSET] ..........................................36Zeroizing [ZERO] ..........................................................................36Messaging ....................................................................................37
Text Messaging [TXT] ...................................................................37Short Message Update [MSG] ......................................................39User Update Messaging [STS] ......................................................39Paging and Call Alert ..................................................................41Conventional Two-Tone/DTMF/MDC1200 Paging [MUTE] ..........41Call Alert Paging [ALRT] ..............................................................41Radio Check [RCHK] ...................................................................42Radio Inhibit/Enable [INH]/[UNINH] ............................................43Other Options and Functions .....................................................44Backlight [LITE] .............................................................................44Battery Life [LIFE] .........................................................................44Bluetooth [BT] ...............................................................................44Busy Channel Operation ...............................................................44Channel Select [CHAN] ................................................................45Cloning [CLON] .............................................................................45Contrast .........................................................................................46Control Lockout [LCK] ...................................................................46Date and Time [DATE] ..................................................................46Global Positioning [GPS] ...............................................................47Hard Power Down [PWRD] ...........................................................47Keypad Programming ...................................................................48Minimum Volume [VOL] ................................................................48Monitor [MON] ...............................................................................48Nuisance Channel Delete [DEL] ...................................................48Phone [PHN] and Hang Up [HANG] .............................................49Radio Accountability Tone [RAT] ..................................................49Radio info ......................................................................................49Repeater Talkaround [T/A] ............................................................49Send Alert Tone [SNDT] ...............................................................49Send Signal [SEND] ......................................................................50Squelch Adjust [SQL] ....................................................................50Site Display [STDS] .......................................................................50Site Lock [STLK] ...........................................................................50Site Search [STSR] .......................................................................50Surveillance Mode [SURV] ...........................................................51System Test ...................................................................................51Transmit Digital [TXAD] ................................................................51Transmit Power [PWR] ..................................................................51
Two-Tone Select [TONE] ..............................................................51Versions ........................................................................................52Zone Select [ZONE] .....................................................................52Keypad Programming ..................................................................53Keypad Programming Navigation .................................................53Entering Keypad Programming Mode ...........................................54Global, System, Zone and Channel Parameters...........................54Global Settings ....................................................................54Displayed Information Lines ..............................................54User Password...................................................................56System Settings .................................................................56System Priority 1 or 2 Channel ..........................................56Tx on Priority 1 Channel ....................................................56Zone Settings .......................................................................56Add Zone ...........................................................................56Delete Zone .......................................................................57Edit Zone ............................................................................57Channel Settings .................................................................57Add Channel ......................................................................58Delete Channel ..................................................................58Edit Channel ......................................................................58P25 ID Unit Call/Receive List ........................................................60User Selectable Code Guards ......................................................60User Selectable Network Access Codes ......................................62User Selectable Talkgroup IDs ......................................................62Warranty ........................................................................................62My Radio Settings ........................................................................64
KNG2 Portable Radio User’s Manual- 1 -IntroductionCongratulations on your purchase of the BK Radio KNG2 Portable radio from RELM Wireless. The KNG2 APCO Project 25 radio oers an array of programmable functionality to help radio users get the most out of their portable communications. Check with your RELM/BK Radio dealer or communications ocer for information on the programmed functions of your radio prior to operation.This manual contains information concerning the operation procedures for the BK Radio KNG2 Portable radio. The KNG2 has been designed to meet the tough requirements of today’s communications environment. Please take a moment to read the information in this manual so you can get optimum performance from your new radio.FCC RequirementsYour radio must be properly licensed by the Federal Communications Commission prior to use. Your BK Radio dealer can assist you in meeting these requirements. Your dealer will program each radio with your authorized frequencies, signaling codes, etc., and will be there to meet your communications needs as your system expands.The FCC rules require manufacturers to comply with the FCC RF energy exposure limits for portable 2-way radios before they can be marketed in the U.S. When 2-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specic user awareness information. Your BK Radio 2-way radio has a RF exposure product label. Also, your BK Radio owner’s and service manuals include information and operating instructions required to control your RF exposure and to satisfy compliance requirements.Compliance with RF Exposure StandardsYour BK Radio 2-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed
RELM Wireless Corporation- 2 -below) for human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environment at operating duty factors of up to 50% transmitting and is authorized by the FCC for occupational use only. In terms of measuring RF energy for compliance with the FCC exposure guidelines, your radio radiates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in Standby Mode. Note: The approved batteries supplied with this radio are rated for a 5-5-90 duty factor (5% talk - 5% listen - 90% standby), even though this radio complies with the FCC occupational RF exposure limits and may operate at duty factors of up to 50% talk. Your BK Radio 2-way radio complies with the following RF energy exposure standards and guidelines:United States Federal Communications Commission, Code of Federal Regulations; 47 CFR §§ 1.1307, 1.1310, 2.1091 and 2.1093American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 EditionIndustry Canada ComplianceThis device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.WARNING:Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
KNG2 Portable Radio User’s Manual- 3 -Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée quivalente (p.i.r.e.) ne dépassepas l'intensité nécessaire à l'établissement d'une communication satisfaisante.The KNG2 Series Radio Transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.Le présent émetteur radio (identier le dispositif par son numéro de certication ou son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.Approved Antennas:Antenna Freq. Range Impedance Gain Radiation PolarizationKNG2-P150KAA0810G2 136 -174MHz 50 Ohms -8dBi Omni VerticalKAA0818 150-170MHz 50 Ohms 0dBi Omni VerticalK A A0 811C 162-174MHz 50 Ohms 0dBi Omni VerticalKNG2-P400KAA0817 380-420MHz 50 Ohms 0dBi Omni VerticalKAA0826 403-435MHz 50 Ohms 1dBi Omni VerticalKAA0815 380-470MHz 50 Ohms 1dBi Omni VerticalKNG2-P500 KAA0816 440-520MHz 50 Ohms 1dBi Omni VerticalKNG2-P800KAA0825 746 -870MHz 50 Ohms 2dBi Omni VerticalKAA0833 760-870MHz 50 Ohms 0dBi Omni VerticalPlease refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits.http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.htmlhttp://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00080.html
RELM Wireless Corporation- 4 -Safety Precautions• Do not operate the transmitter in close proximity to blasting caps.• Do not operate the radio in an explosive atmosphere (petroleum fuels, solvents, dust, etc.) unless your radio is an intrinsically safe model designed for such use.RF ENERGY EXPOSURE AWARENESS AND CONTROL INFORMATION, AND OPERATIONAL INSTRUCTIONS FOR FCC OCCUPATIONAL USE REQUIREMENTSBEFORE USING YOUR PORTABLE 2-WAY RADIO, READ THIS IMPORTANT RF ENERGY AWARENESS AND CONTROL INFORMATION AND OPERATIONAL INSTRUCTIONS TO ENSURE COMPLIANCE WITH THE FCC’S RF EXPOSURE GUIDELINES.NOTICE: This radio is intended for use in occupational/controlled conditions, where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This radio device is NOT authorized for general population, consumer, or any other use.This 2-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy; other forms include electric power, radar, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used improperly can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. The energy levels associated with radio waves from portable 2-way radios, when properly used, are not great enough to cause biological damage.Experts in science, engineering, medicine, health and industry work with organizations to develop standards for exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All 2-way radios
KNG2 Portable Radio User’s Manual- 5 -marketed in North America are designed, manufactured and tested to ensure they meet government established RF exposure levels. In addition, manufacturers also recommend specic operating instructions to users of 2-way radios.These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits.http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.htmlRF Exposure Compliance and Control Guidelines and Operation InstructionsTo control your exposure and ensure compliance with the occupational/controlled environment exposure limits always adhere to the following procedures.Guidelines:Do not remove the RF Exposure Label from the device.User awareness instructions must accompany device when transferred to other users. Do not use this device if the operational requirements described herein are not met.Operating Instructions:Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50% of the time, or less, is important because this radio generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance). Hold the radio in a vertical position in front of face with the microphone (and the other parts of the radio, including the antenna) at least one inch (2.5 cm) away from the nose. Keeping the radio at the proper distance is important because RF exposures decrease with distance from the antenna. Antenna should be kept away from eyes.
RELM Wireless Corporation- 6 -When worn on the body, always place the radio in a BK Radio approved clip, holder, holster, case, or body harness for this product. Using approved body-worn accessories is important because the use of BK Radio or other manufacturer’s non-approved accessories may result in exposure levels which exceed the FCC’s occupational/controlled environment RF exposure limits.If you are not using a body-worn accessory and are not using the radio in the intended use position in front of the face, then ensure the antenna and the radio are kept at least one inch (2.5 cm) from the body when transmitting. Keeping the radio at the proper distance is important because RF exposures decrease with increasing distance from the antenna.Use only BK Radio approved supplied or replacement antennas, batteries, and accessories. Use of non-BK Radio approved antennas, batteries, and accessories may exceed the FCC RF exposure guidelines. For a list of BK Radio approved accessories visit the following website: http://www.relm.com.The AMBE® voice compression software included in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. The user of this software is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the object code, or in any other way convert the object code into a human-readable form. This software is licensed solely for use within this product. US Patent Nos. #6,912,495 B2, #5,870,405, #5,826,222, #5,754,974, #5,715,365, #5,701,390, #5,649,050, #5,630,011, #5,581,656, #5,517,511, #5,491,772, #5,247,579, #5,226,084, and #5,195,166.Contact InformationFor additional information on exposure requirements or other information, visit website http://www.relm.com.
KNG2 Portable Radio User’s Manual- 7 -Information and OptionsDepending on model type, KNG2 radios operate in the VHF, UHF or 800MHz frequency band. Up to 5000 channels can be programmed into the radio. The channels may be divided into operating zones. Zones can be designated as standard operating zones or command zones. Command zones are made of up of channels selected from standard operating zones.Model Frequency RangeP150 136 - 174MhzP400 380 - 470MhzP500 440 - 520MhzP800 763 - 870Mhz
RELM Wireless Corporation- 8 -OptionsFactory installed options are listed on a tag located on the back of your radio near the top. Number OptionKZA0558 Intrinsically Safe CerticationKZA0577 AES/DES EncryptionKZA0570 Over-the-Air Rekeying (OTAR)KZA0579 P25 TrunkingKZA0581 Vote-ScanKZA0582 Over-the-Air Programming (OTAP)Battery Installation and RemovalNOTE: For safety reasons, rechargeable battery packs are shipped uncharged or only partially charged. Therefore, a rechargeable battery pack should be properly charged in an approved battery charger before use.Only RELM Wireless approved batteries should be used to insure proper operation and specications.Models with KZA0558, intrinsically safe certication, must use a KAA0100IS battery to meet certication requirements.Installing the BatteryTurn the radio o.1. Align the tabs on the bottom of the battery 2. with the slots on the radio.Push the top of the battery toward the radio 3. until release tab “clicks” into place.KZA0577KZA0579Options Tag
KNG2 Portable Radio User’s Manual- 9 -Removing the BatterySlide the release tab toward the 1. bottom of the radio.Pull the top of the battery out. 2. (Approximately 30o) Pull up to remove the battery pack.3. NOTE: All information programmed into the radio is maintained even when the battery pack is removed.Battery Care and Maintenance BK Radio battery packs are available in a variety of capacities and types for special applications. Rechargeable battery packs can be charged separately or while attached to a radio.Periodically check the contacts on the battery pack for dirt or debris that could prevent a good electrical contact with the charging base. WARNING!DO NOT DROP A BATTERY PACK INTO FIRE.AN EXPLOSION MAY OCCURAntenna Installation and RemovalNOTE: Transmitting without an antenna could result in damage to your radio. Use RELM/BK Radio approved antennas only. Use of non-qualied or mismatched antennas could result in diminished radio operation. Published radio specications cannot be guaranteed with non-approved antennas. Bent, broken or damaged antennas should be replaced.+TS ON-Release Tab
RELM Wireless Corporation- 10 -Installing the AntennaInsert the radio’s antenna connector into the threaded connector of the antenna and turn it clockwise until it is rmly seated.Removing the AntennaHolding the base, turn the antenna counterclockwise until released.Radio ControlsOn/O Volume3 Programmable Side ButtonsPush-to-TalkSpeakerAccessory ConnectorAlphanumeric DisplayDual MicrophonesProgrammable ButtonsKeypadChannel/Zone SelectCollar SwitchAntenna ConnectorEmergency ButtonToggle SwitchesLED151234567891 11012131416SCANPRIVOL
KNG2 Portable Radio User’s Manual- 11 -LCD DisplayThe KNG2 display can be programmed for a variety of options and functionality. Check with your RELM/BK Radio dealer or communications ocer for information on the programmed functions of your radio.NOTE: The KNG2 display can be programmed to display dierent information when a trunking or conventional channel is selected. Status Indicators Receiver Signal StrengthRXD, RXA Receive Digital, Receive Analog, Hold Time ActiveTXD, TXA Transmit Digital, Transmit AnalogL, H Low or High transmit powerSelected channel is encrypted. Flashing means a reception is decrypted - solid means next TX will be encrypted.Battery Level IndicatorP1, P2 Priority 1 Channel, Priority 2 ChannelScanned ChannelCChannel Scan OnDDual Mode Scan OnZPZone Scan OnCPPriority Scan OnRepeater Talkaround EnabledMonitor ModeStatus IndicatorsProgrammable Alphanumeric LabelsProgrammable Button LabelsCh 1171.58500 MHz RXDKNG2-P150CHAN+ TXCG ZONE MENUC
RELM Wireless Corporation- 12 -Status Indicators Open AudioVoice Mute EnabledGPS EnablediPTrunking IP Data EnabledBluetooth Enabled. Flashing indicates Discovery Mode.Bluetooth PairedAlphanumeric Label OptionsNOTE: Three channel information lines are programmable with PC Radio Editor.None No information is displayed.Channel Label Alphanumeric label of currently selected channel or active scanned channel.Channel Number Channel number of currently selected channel or active scanned channel.Channel # and Zone Currently selected channel numbers and zone.Date and Time Displays date and time.DTMF* Displays the numeric DTMF tones of received signal.Frequency* Operating frequency of currently selected channel or active scanned channel.MDC* Displays the numeric MDC ID or received signal DT MF.Radio Name Displays radio name.Received TGID P25 Talk Group ID of the radio transmitting the message currently being received.Rx’d Unit ID P25 ID of a received digital signal. If the incoming ID is programmed in your Unit ID Call List list, the associated label will be displayed. During standby you radio ID number is displayed.Rx/Tx Key Currently selected encryption key.Rx Picklist Selections* NAC, TGID or Code Guard currently selected from the programmable RX Pick Lists.
KNG2 Portable Radio User’s Manual- 13 -Alphanumeric Label OptionsSubaudible* Displays CxCSS value of received signal.Tx Picklist Selections* NAC, TGID or Code Guard currently selected from the programmable TX Pick Lists.Unit ID Shows your P25 Unit IDWhile receiving, the ID of the radio transmitting the message is displayedIf the received ID is programmed in your radio's Call List, the corresponding label will be displayedZone Label Label of currently selected zone.Zone and Channel # Currently selected zone and channel numbers.Zone Number Currently selected zone number.*Conventional Channels OnlyProgrammable Switch and Button FunctionsThe KNG2 portable radio is equipped with seven programmable control buttons and three programmable switches. Switch and button functions are assigned via PC programming. NOTE: Switches, buttons and menu items can be programmed for dierent functions when a trunking or conventional channel is selected. Button Options and LabelsThe Diamond, Up Arrow, Down Arrow, and Square buttons are programmable with PC Radio Editor. The programmed functions are activated by pressing the associated button. Active functions are indicated by a highlighted background. SCN = Active, SCN = Inactive. 151234567891 11012131416SCANPRIVOLRight ToggleCollar SwitchLeft ToggleOrange Button SquareDiamond Up DownSide Buttons15123456789111012131416SCANPRIOn OOn O
RELM Wireless Corporation- 14 -Keypad Menu OperationOne button can be programmed as “Menu”. Items shown in the Options and Labels table can be programmed and arranged via PC programming. These items can then be accessed with the Menu button.To select from the menu:1. Press the programmed “Menu” button.2. Scroll to the desired menu item with the up/down buttons .3. Press the button marked ENT to open the item. Options and LabelsMenu Switch Button Label Trunk Conv.Backlight x x x LITE x xBattery Life x x LIFE x xBluetooth x x BT x xCall Alert x x ALRT x xChannel Add/Delete x CHAN+/- xChannel Scan x x x SCAN xChannel Scan List x x SCN+ xChannel Select x x CHAN x xCloning x-xContrast x-x xControl Lock x x x LCK x xDate and Time x x x DATE x xDual Mode Scan x x x DSCN x xDual Mode Scan List x x DSED x xEmergency1x-x xEnhanced Scan x x x ESCN xGPS* x x GPS x xHang Up x x HANG xHard Power Down x PWRD x xHome Channel x HOME x xInhibit x x INH xKeyset Select x x KSET x xMenu xMENU x xChannel ScanTx DigitalPRI Scan TXDESC ▲ ▼ ENT
KNG2 Portable Radio User’s Manual- 15 -Options and Labels (cont.)Menu Switch Button Label Trunk Conv.Minimum Volume x x VOL x xMonitor x x x MON xNuisance Delete x DEL xPhone x x PHN xPicklist - Rx CxCSS x x RXCG xPicklist - Rx NAC x x RXNC xPicklist - Talkgroup ID x x TGID xPicklist - Tx CxCSS x x TXCG xPicklist - Tx NAC x x TXNC xPicklist-KEY** x x KEY xPriority Channel x x PRI xPriority Scan x x x PSCN x xRadio Accountability Tone xRAT x xRadio Check x x x RCHK xRadio Info x -x xRekey Request*** x x RKEY x xRepeater Talkaround2x x x T/A xSend Alert Tone x SNDT x xSend Signal x SEND xShort Message Update x x MSG xSite Display**** x x STDS xSite Lock**** x x STLK xSite Search**** x x STSR xSquelch Adjust x x SQL xSurveillance Mode x x x SURV x xSystem Test x -Talkback Scan x TKBK xText Message x x TXT xTwo-Tone Select x x TONE xTx Digital/Analog x x x TXAD xTx Power x x x PWR x xTx Secure** x x x SEC x xUninhibit x x UNINH xUnit Call x x UNIT x x
RELM Wireless Corporation- 16 -Options and Labels (cont.)Menu Switch Button Label Trunk Conv.User Update x x STS xVersion x-x xVoice Mute2x x MUTE xZeroize Keys** x x ZERO x xZone Scan xx x ZSCN xZone Scan List xxZSC+ xZone Select xxZONE x x1Emergency button can only be assigned to the orange button.2Works on a per-channel basis.*Requires GPS option.**Requires Encryption option.***Requires Encryption and OTAR options.****Requires P25 Trunking option.
KNG2 Portable Radio User’s Manual- 17 -Channel/Zone Selection OptionsThe KNG2 can be programmed with up to 8192 individual channels. These channels can be divided into zones of one or more channels. Accessing a channel or zone depends on radio programming.Channels or zones can be selected using the channel/zone select knob, by an assigned button or menu item or by direct keypad entry. More than one selection mode can be programmed.Channel/Zone Selector KnobWhen programmed with the default setting, the channel/zone knob is used to select a channel (1-16) from the active zone. If programmed to select zones, zones (1-16) will be selected with the knob. Channels or zones above sixteen can only be accessed via button, menu or keypad selection. See below.Button/Menu Item SelectionIf programmed to a button, pressing the button will display the list of available channels or zones. If programmed as a menu item, the lists can be displayed by selecting Zone or Channel select from the menu list. (See “Keypad Menu Operation”)Use the Prev/Next buttons to scroll to the desired selection.Alternatively, the number keys can be used to jump directly to the desired channel or zone.Press the square button marked ENT to go to the highlighted zone or channel.Direct Keypad EntryThe numeric keypad may also be programmed to directly select channels or zones. Pressing a number will activate the zone or channel list.Select the desired channel or zone and press the square button marked ENT to go to the highlighted location.Press the diamond button marked ESC to cancel the selection and return to the currently operating zone or channel.2: Label 2ESC PREV NEXT ENTZone Select1: Label 13: Label 34: Label 4118: Label 118ESC PREV NEXT ENTZone Select117: Label 117119: Label 119120: Label 120120118: Label 118ESC PREV NEXT ENTZone Select117: Label 117119: Label 119120: Label 120120
RELM Wireless Corporation- 18 -Using Knob and Button Operations TogetherWhen selected via the button, menu or keypad method, the entered channel or zone becomes active regardless of the knob position.When the knob is turned, the radio leaves the keypad selected channel and goes to the selection indicated by the knob position.Example: With the channel select knob on channel 1, selecting channel 12 from the keypad will switch the operating channel to channel 12.Turning the channel knob to channel 2, switches the operating channel to channel 2.Basic Radio OperationTurn power on by turning the Volume knob clockwise. A beep sounds, indicating the radio is operational. The LCD display shows the programmed display information of the currently selected channel. Receive151234567891 11012131416SCANPRIVOLLITE T/A MENU LCKSet the volume knob to approximately 50-60%.When a signal is received, the unprogrammable top line of the display indicates the signal strength and operating mode of the incoming transmission. RXA = analog, RXD = digital.To check radio volume when no signal is being received, put the Monitor mode in “Open Squelch” (see “Monitor”) and adjust the volume to a comfortable level.Transmit TXDMicrophones PTT1. Press the PTT (Push-To-Talk) switch. When the radio is transmitting the indicator LED glows red and TXD or TXA appears in the display. 2. Talk in a normal voice with the microphone one to two inches from your mouth.3. Release the PTT switch to stop transmitting.If the length of your message is nearing the programmed Time-Out Timer setting, a tone sounds indicating 5 seconds left to transmit. At the end of the programmed time, the transmitter automatically shuts o and an alert tone sounds. To continue transmission, release the Ch 1171.58500 MHz RXDKNG2-P150CHAN+ TXCG ZONE MENUCh 1171.58500 MHz TXDKNG2-P150CHAN+ TXCG ZONE MENU
KNG2 Portable Radio User’s Manual- 19 -PTT switch, then press it again and continue talking.If the Transmit Indicator does not glow and a tone sounds, you are on a receive-only channel or the channel is busy (see Busy Channel Lockout). Select an authorized transmit channel.NOTE: When using a channel programmed for mixed mode transmit the signal will be transmitted in the mode selected by the TX Digital selection. Or if programmed for Mixed Mode Talkback, the radio will transmit in the mode of the last received channel while the “RX” icon is displayed. (See Mixed Mode Operation.)Command Zone OperationThe KNG2 portable radio allows construction of Command Zones drawn from any of the programmed channels in standard operating zones. Each zone is designated as a Standard Operating Zone or a Command Zone with the PC Radio Editor. Building a Command Zone [CHAN+]To build a Command Zone the “Channel Add/Delete” function must be assigned to a programmable button.While operating in a standard zone press the “CHAN+” button to add the currently selected channel to a command zone. The list of available command zones will be displayed. Use the up/down arrows to select the zone to add the channel or use the number keys to move directly to the desired zone.Pressing the “Enter” button copies the channel information to the rst available channel slot in the selected command zone.Example: If the command zone has three channels, the newly added channel will be channel four.Editing a Command Zone [CHAN-]When operating in a Command Zone, press the “CHAN-” button to remove the selected channel from the zone. When a channel is deleted, the display momentarily shows “Channel Deleted”, and the following channels move up in the list. For example, if channel 5 is deleted, channel 6 becomes the new channel 5, channel 7 becomes the new channel 6, etc. NOTE: Modications to a command zone channel, such as User Selected Tones, do not aect the original standard zone channel.
RELM Wireless Corporation- 20 -Code Guard/NAC OperationConventional ChannelsCode Guard ReceiveAnalog channels programmed with a receive code guard will be heard only when the proper carrier frequency and Code Guard value is received. Analog and mixed mode receive channels will also unmute when the radio is in monitor mode.Code Guard TransmitWhenever transmitting on an analog channel, any programmed sub-audible Code Guard is transmitted. Depending on radio programming, the Code Guard can be the default tone assigned to the channel or a tone selected from the Code Guard Picklist (see Pick List Options).151234567891 11012131416SCANPRIVOLBusy Channel/TransmitIndicatorCh 1KNG - P25171.58500 MHzLITE T/A MENU LCK TXAThe frequency must be clear prior to transmitting on a Code Guarded channel. If the LED Indicator is yellow do not transmit. Busy Channel Lockout can be programmed to disallow transmitting while a channel is busy.1. Press the PTT switch. When the transmitter is on, the LED Indicator glows red and TX appears in the display. 2 Talk in a normal voice with the microphone one to two inches from your mouth.3. Release the PTT switch to stop transmitting.Analog Squelch ControlSub-audible signaling (CTCSS/CDCSS) is used to allow a group of radios to be selectively called in an analog system. Programming the receive code guard equal to zero allows for Carrier Squelch operation, where the radio will unmute whenever a carrier is detected regardless of the transmitted Code Guard.
KNG2 Portable Radio User’s Manual- 21 -APCO Project 25 Digital Squelch ControlNetwork Access Codes (NACs) provide the digital equivalent of analog sub-audible signaling (CTCSS/CDCSS) allowing a group of radios to be selectively called within a system.Users in the same area (using the same NAC) can be further divided into Talk Groups, with each group having its own Talk Group ID (TGID). Group Calls are made by designating both the users’ NAC and TGID.Each radio also has an individual P25 unit ID. A Unit-to-Unit call contains the addressee’s NAC, and uses the addressee’s P25 unit ID instead of the TGID.When operating in Digital Mode, each channel can be programmed to use either Normal squelch or Selective squelch.Normal squelch is used to mimic analog operation. Signals are only qualied with the programmed NAC. TGIDs and P25 Unit IDs are ignored. Each digital channel is programmed with a receive NAC and a transmit NAC. When an incoming signal’s NAC matches the channel’s programmed receive NAC, the radio unmutes. The default NAC is 0659 ($293 hex). The digital equivalent of carrier squelch is achieved by programming the receive NAC = $F7E (3966 decimal). The radio will unmute when a digital signal with any NAC is detected. The $F7E (3966 decimal) NAC is reserved for receivers and is not allowed as a transmit NAC.Selective squelch is used for processing Group Calls and Unit-to-Unit Calls. TGIDs are assigned on a per-channel basis. Users can be separated into Talk Groups with each group having its own TGID. Then, on channels programmed for Selective squelch, the incoming signal’s NAC and TGID must match the channels programmed receive NAC and TGID for the radio to unmute. The default TGID is 1. The TGID value 65535 ($FFFF hex) is used to eect an “All Call”. If the radio receives a signal with a matching NAC and the TGID = 65535 ($FFFF hex), it will unmute. Also, if the radio’s programmed TGID is 65535 ($FFFF hex), it will open on any signal with a matching NAC, ignoring the incoming TGID. A TGID = 0 means “no one”. If the radio is programmed with the TGID = 0, it will accept incoming group calls containing the “All Call” TGID, and correctly addressed Unit-to-Unit calls only.
RELM Wireless Corporation- 22 -Mixed Mode OperationThe receiver and transmitter are capable of operating in analog wide-band (25 kHz channel spacing), analog narrow-band (12.5 kHz channel spacing) and APCO Project 25 Digital Mode.Each channel’s Receive and Transmit Mode can be set independently as follows: Mode RX TXAnalog Receive qualied analog signals onlyTransmit analog signals onlyDigital Receive qualied digital signals onlyTransmit digital signals onlyMixed Automatically receive qualied analog or digital signalsTransmit analog or digital signal, depending on the status of “TX Digital” switchDigital receptions and transmissions will be indicated by illuminating the D annunciator in addition to the RX or TX annunciator.Analog receptions and transmissions will be indicated by illuminating the A annunciator in addition to the RX or TX annunciator.Mixed Mode TalkbackIf Mixed Mode Talkback is enabled, transmissions initiated while hold time remains will be in the same mode as the received signal, if the signal was received on the Ready to Transmit (RTX) channel. Depending on programming, the RTX channel can be the main channel, a held scan or priority channel if Talkback Scan is enabled, or the Priority 1 channel if “TX on PR1” is enabled. TX Mode on the RTX channel must be set to MIXED. While hold time after a reception remains, transmissions will be in the same mode as the received signal, regardless of the status of the TX Digital switch. As in Talkback Scan, the RTX channel and receive annunciators will be displayed for the duration of the timer.Ch 1171.58500 MHz TXDKNG2-P150CHAN+ TXCG ZONE MENUCh 1171.58500 MHz TXAKNG2-P150CHAN+ TXCG ZONE MENUCh 1171.58500 MHz RXDKNG2-P150CHAN+ TXCG ZONE MENUPress the PTT while the RX indicator is shown
KNG2 Portable Radio User’s Manual- 23 -Trunking Channel Basic OperationSome KNG2 radios are equipped with optional P25 Trunking capability. To determine if your radio is trunking compatible, remove the battery and check the Options Label near the top of the radio. “KZA0579” indicates the trunking option is installed.Trunking parameters and functions can only be programmed by qualied persons via PC. Contact your system administrator or radio dealer for information on how your radio is programmed.System RegistrationIf the radio is powered on when a trunking channel is selected, the radio will attempt to register with the selected trunking system.The LED will ash twice upon successfully registering with the system and setting talkgroup aliation.If the aliation was unsuccessful the LED will continue to ash.If the radio is not in range of the system “Out of Range” will be displayed and an alert tone will sound every ten seconds.If registration is refused or denied, a denied message and tone will appear briey before switching to “Out of Range” mode.After successful registration the programmed LCD display criteria is displayed.TransmittingWhen the PTT is pressed, a three beep Talk Permit Tone will be heard if the channel is available. If there is no channel available the radio will emit a tone and display “BUSY”. Release the PTT. The radio will remain in busy mode until the channel is available. When the channel becomes available the three beep Talk Permit Tone will be emitted. Re-press the PTT to continue your call.If the PTT is not pressed within two seconds of the Talk Permit Tone, the radio will return to normal standby mode.
RELM Wireless Corporation- 24 -Scan OptionsChannel Scan [SCAN]Conventional ChannelsWhen on, Channel Scan monitors activity on the scan list channels in the currently operating zone. Scan operates only while the radio is not transmitting.Channels designated as scan channels are identied by the  symbol at the top of the LCD display. If allowed, the scan list can be edited by the radio user. (See Channel Scan List).When Channel Scan is on, the C symbol will be shown at the top of the LCD display.When a signal is detected, scanning stops and the message is received. The received channel is shown in place of the selected channel. Once the signal ends, the radio continues to monitor the channel for the preset scan delay time before it resumes scanning. Channel Scan operation can be a switch or as a button or menu list item.Channel Scan may be used in conjunction with Priority Scan operation (see Priority Scan).Scanning Code Guarded ChannelsConventional Analog Channels When a signal is detected, scanning stops while the radio checks for the proper Code Guard value. If the signal contains the proper Code Guard value, the radio receives the message. Otherwise, the radio resumes scanning immediately.Transmitting with Scan On The radio transmits on the channel selected by the Channel Selector knob unless Talkback Scan is enabled (see Talkback Scan) or Priority Scan is on and Transmit on Priority 1 is enabled (see Priority Scan).
KNG2 Portable Radio User’s Manual- 25 -Channel Scan List [SCN+]Conventional ChannelsThe Channel Scan List allows the radio user to add or remove channels from the list of channels to be monitored while channel scanning. Channels designated as scan channels are identied by the  symbol at the top of the LCD display. The Scan List operation can be assigned as a button or menu list item.When Channel Scan List is assigned to a button, press the button to add or remove the selected channel from the scan list.If Vote Scan option is installed, pressing the "+/-" button will cycle the scan setting for the selected channel through checked (for scan on), "(V)" for Vote Scan, and O.When assigned as a menu item, open the menu and select the channel you wish to add or remove from the scan list. Press “+/-” to add or remove. Channels in the scan list will be indicated with the  symbol.Talkback ScanConventional and Trunking ChannelsIf your radio is programmed for Talkback Scan, any PTT transmission that occurs while a channel is active or while scan delay time remains, will be on the transmit frequency of the received channel. The ‘RX’ indicator will be shown in the display while scan delay time remains.Talkback Scan will not work if Priority Scan is on and your radio is also programmed to transmit on the Priority 1 channel (see Priority Scan).Vote Scan [Requires Option KZA0581]Conventional ChannelsChannels in a multicast conventional systems can be added to the scan list and designated as “voted” channels. When a signal is received on a voted channel the radio checks all voted channels in the vote scan group and selects the channel with the best signal.If enabled, vote scanning takes place whenever the channel scan switch in on.NOTE: Channel voting occurs only with Channel Scan and is disabled when Zone Scanning. Channels programmed as Vote channels are treated as normal scan list channels during Zone Scan operation.Vote Scan groups can only be created in the PC Radio Editor.See also Priority Scan and Zone Scan.
RELM Wireless Corporation- 26 -Dual Mode Scan [DSCN]Conventional and Trunking ChannelsDual Mode scan provides the ability to scan trunking and conventional channels simultaneously. NOTE: The Dual Mode Scan list must be setup using the PC Radio Editor and cannot be changed by the radio user.When Dual Mode Scan is turned on the D icon is displayed and the radio scans all channels in the dual mode scan list.Dual Mode Scan can be assigned to a switch or as a button or menu list item. For best operation, Dual Mode Scan should be assigned in both conventional and trunking global settings with the PC Radio Editor.Enhanced Scan [ESCN]Conventional ChannelsEnhanced Scan combines Priority Scan and Channel Scan to one switch/button. Enabling Enhanced Scan will turn on both Priority and Channel Scan. Priority Scan [PSCN]Conventional ChannelsTwo channels can be designated as priority channels. When Priority Scan is on, these channels are monitored for incoming trac. When a qualied signal is detected the speaker is opened to listen to the message.If a message is detected on the channel designated as Priority 2, the radio will continue to monitor Priority 1 channel for activity. If activity is detected the radio will switch to the Priority 1 channel.When used in conjunction with Channel Scan, the radio monitors the Priority channels and will switch from a scanned channel to the Priority channel if a qualied signal is detected.Depending on radio setup, priority channels can be tied to the currently operating zone or can be assigned to a specic channel regardless of the operating zone.Channels designated as Priority channels are identied by the P1 or P2 symbol at the top of the LCD display. When Priority Scan is on, the CP symbol will be shown. Priority Scan operation can be a switch or as a button or menu list item.Trunked ChannelsWhen on trunked channels, Priority Scan is used to turn system scanning on or o.
KNG2 Portable Radio User’s Manual- 27 -Priority Channel Select [PRI]Conventional ChannelsDepending on programming, priority channels can be radio-wide (System) or zone specic (Zone). Radio-wide priority channels are monitored regardless of the current operating zone. (See Priority Scan for more details.)If enabled the user can use the keypad to change the priority channels. Priority Channel Select can be assigned to a switch or as a button or menu list item.Selecting a System Priority ChannelOpen the menu and select the System Priority channel you wish to change.Press “ENTER” to open System Priority Channel menu.Options:O - Disables the priority channel.Use Main - Uses the selected channel as the priority channel.Select - Assigns a specic channel as the priority channel.To assign a specic channel as a System Priority Channel, highlight “Select” and press the “ENTER” button.The Zone selection menu will be displayed.Highlight the zone of the desired priority channel and press the “ENTER” buttons.The Channel selection menu will then be displayed.Highlight the desired channel and press the “ENTER” button to set the priority channel.The display will return to the main Priority Channel Select menu.Selecting a Zone Priority Channel Open the menu and select the Zone Priority channel you wish to change.Press “ENTER” to open Priority Channel menu.Options:O - Disables the priority channel.Use Main - Uses the selected channel as the priority channel.Select - Assigns a specic channel as the priority channel.To assign a specic channel as a Zone Priority Channel, highlight “Select” and press the “ENTER” button.
RELM Wireless Corporation- 28 -The Channel selection menu will be displayed.Highlight the desired channel and press the “ENTER” button to set the priority channel.The display will return to the main Priority Channel Select menu.Zone Scan [ZSCN]Conventional ChannelsWhen Zone Scan and Channel Scan are on, the radio scans all programmed scan channels in zones designated as Zone Scan zones. If allowed, the scanned zone list can be edited by the radio user. (See Zone Scan List).When Zone Scan is on, the ZP symbol will be shown at the top of the LCD display.Zone Scan operation can be a switch or as a button or menu list item and may be used in conjunction with Priority Scan operation.Zone Scan List [ZSC+]Conventional ChannelsThe Zone Scan List allows the radio user to add or remove zones from the list of zones to be scanned.The Zone Scan List operation can be assigned as a button or menu list item.When Zone Scan List is assigned to a button [ZSC+], press the button to add or remove the currently operating zone from the scan list.When assigned as a menu item, open the menu and select the Zone you wish to add or remove from the scan list. Press “ENTER” to add or remove. Zones in the scan list will be indicated with the  symbol.
KNG2 Portable Radio User’s Manual- 29 -Pick List OptionsThe KNG2 provides users the ability to select and assign Pick List functions to specic channels. Pick List Options can be assigned to a programmed button or as menu list items.Available Pick List options include: Transmit Code Guards Receive Code Guards Transmit Network Access Codes Receive Network Access Codes Talk Group IDs Encryption Keys (see Encryption Operation) Encryption Keysets (see Encryption Operation)TX/RX CxCSS Picklist [TXCG] [RXCG]Conventional Analog or Mixed Mode ChannelsSelecting a CTCSS/CDCSS Code Guard from the Pick List will assign the tone to the currently select analog or mixed-mode channel. User assigned Transmit and Receive Code Guards are selected independently. To change a Code Guard, open the RXCG or TXCG menu, select the desired tone and press “ENTER”.To return the tone to the pre-programmed value select “Default”.If allowed, picklist values can be changed through keypad programming.TX/RX Network Access Code Picklist [TNAC] [RNAC]Conventional Digital or Mixed Mode ChannelsSelecting a Network Access Code (NAC) from the Pick List will assign the NAC to the currently select digital or mixed-mode channel. User assigned Transmit and Receive NACs are selected independently. To change a NAC, open the RXNAC or TXNAC menu, select the desired NAC and press “ENTER”.To return the NAC to the pre-programmed value select “Default”.If allowed, picklist values can be changed through keypad programming.
RELM Wireless Corporation- 30 -Talk Group ID Picklist [TGID]Conventional Digital ChannelsSelecting a Talk Group ID from the Pick List will assign the TGID to the currently select channel. All other channels are unaected.User selectable menu access can be assigned to a button or menu list item.Open the menu of available TGIDs. Select the desired Talk Group ID or, to return the TGID to the pre-programmed value, select “Default”.Press “ENTER” to set the selection.If allowed, picklist values can be changed through keypad programming. Encryption Key Picklist [KEY]Digital or Mixed Mode Channels Encryption equipped radios only.Selecting an Encryption Key from the Pick List will assign the key to all encrypted channels that do not have ‘Key Lock’ programmed. Locked key channels will continue to use the pre-programmed key. (See Encryption Operation)Keyset Picklist [KSET]Digital or Mixed Mode Channels OTAR equipped radios only. Selecting a Keyset from the Pick List will cause the radio to use encryption keys from the selected Keyset. (See Encryption Operation)
KNG2 Portable Radio User’s Manual- 31 -Unit-to-Unit Call OptionsIndividual Unit Call [UNIT]Conventional Digital and Trunking ChannelsP25 Unit IDs allow for Unit-To-Unit calls when the radio is operating in Digital Mode. The function must be enabled by radio programming to allow this mode of operation. Channels programmed for analog only operation will not be able to transmit or receive Unit-To-Unit calls.Conventional ChannelsPlacing an Individual Unit CallOpen the Unit Call menu and select the desired “Unit Call” option.Last Call = Use the P25 ID of the last Call.Call List = Use the programmed P25 ID List.Enter ID = Enter a numeric P25 ID.Press Enter to enter Unit Call Mode.The LCD displays the ID number or associate label of the targeted radio.Press the PTT button to send the unit-to-unit call.To exit the Individual Call mode press “Exit”.If there is no response to the call after 60 seconds, the radio exits the Unit-to-Unit mode and returns to normal operation.Receiving an Individual Unit Call When a properly addressed unit call is received, an alert tone sounds and the LCD displays the ID number or associated label of the radio placing the call.Accept the callTo accept the call and respond in unit-to-unit mode, press “ACPT” and transmit as normal.To exit the Individual Call mode, press “Exit”.Ignore the callTo ignore the call and continue operating in normal mode, press “INGR”.
RELM Wireless Corporation- 32 -Unit-to Unit CallbackIf enabled, pressing PTT during the hold time results in a Unit-to-Unit call to the received unit ID.If there is no response to the call after 60 seconds, the radio returns to normal operation.Call List ProgrammingIf enabled with the PC Radio Editor, the P25 Call List for conventional channels can edited via the radio’s keypad programming function. Trunking ChannelsLimitations on unit-to-unit calls may programmed in trunking systems. Options include disallowing unit-to-unit operation, limiting operation to only the programmed unit call list or ‘response only’ which allows the user to respond to incoming calls only. Check with your system administrator for information about your programmed features.Placing a CallWhen placing a unit-to-unit call on a trunking channel, a telephone-type ring tone will be emitted until the targeted radio acknowledges or responds to the call.Receiving an Individual Unit Call When receiving a unit call, an alert tone will be emitted and the LCD will display the Unit ID of the radio sending the call.Press “Accept” to respond to the call or “Ignore” to remain in normal operation.
KNG2 Portable Radio User’s Manual- 33 -Emergency Signaling OptionsConventional Digital and Trunking Channels The KNG2 portable radio supports P25 Emergency Operation. When Emergency Operation is engaged the radio will transmit the P25 ID of the radio along with the required P25 Emergency bit. Emergency operation applies only to channels programmed for Digital or Mixed Mode transmissions. On channels programmed for analog transmissions, pressing PTT in Emergency Mode will result in a normal analog transmission.On channels programmed for Mixed Mode transmissions, pressing PTT will result in a digital transmission, regardless of the position of the ‘TX Digital’ switch.All scanning and priority functions will be disabled during Emergency operation. Depending on the radio’s PC programmable settings, emergency signal will be sent automatically or with each Push-to-Talk.Placing an Emergency Call 151234567891 11012131416SCANPRIVOLTo place an emergency call, press and hold the programmed emergency button until the radio beeps and the display ashes “EMERGENCY”. Radio automatically sends the emergency signal on the pre-programmed emergency channel.To return to normal operation press and hold the Emergency button or cycle radio power.Receiving an Emergency SignalTo receive an emergency call, the radio’s receive mode must be programmed to Digital or Mixed.When receiving a qualied emergency call, the radio will beep. The display will ash the word “EMERGENCY” along with the P25 ID of the radio sending the signal, for the duration of the reception, as well as during any hold time. The RXD icon will also be lit. EMERGENCY TXDKNG2-P150CHAN+ TXCG ZONE MENUEMERGENCY RXDUnit ID 12345CHAN+ TXCG ZONE MENU
RELM Wireless Corporation- 34 -Encryption OperationConventional and Trunking Channels The KNG2 may optionally be congured for Secure communication on channels operating in Analog or Digital Mode. To determine if your radio is encryption compatible, remove the battery and check the Options Label near the top of the radio. “KZA0577” indicates the encryption option is installed.Required SetupRadios that have the DES/AES factory option for encryption must have encryption keys loaded with an APCO Project 25 compatible key ll device such as the Motorola KVL 3000 Plus, using a BK Radio keyloader cable. The radio can hold up to 64 AES and/or DES keys.After loading keys in the radio, the PC Radio Editor must be used to congure the radio’s key table and to assign default transmit keys to each channel.Radios that have the OTAR factory option support Over-the-Air Rekeying of encryption keys (OTAR). The PC Radio Editor must be used to enable OTAR and to mark the channel(s) that will communicate with the Key Management Facility (KMF). In addition, the radio must have key encryption keys (used only to encrypt other keys) loaded with an APCO Project 25 compatible key ll device such as the Motorola KVL 3000 Plus, using a BK Radio keyloader cable.Basic OperationThe receiver automatically detects both clear and secure signals.The transmitter selects clear or secure operation based on each channel’s programming. Digital channels can be programmed to always transmit encrypted, always transmit clear, or to select the encryption mode with the TX Secure switch.The display indicates Secure Operation as follows:In Standby Mode, if the radio will transmit in Secure Mode when PTT is pressed, the encrypt icon is displayed.When receiving an encrypted signal, the encrypt icon ' ' ashes in the display. When transmitting an encrypted signal, the LED alternates between red and blue.Ch 1171.58500 MHzKNG2-P150CHAN+ TXCG ZONE MENU
KNG2 Portable Radio User’s Manual- 35 -Transmit Secure [SEC]Channels programmed for selectable encryption can have “Transmit Secure” programmed as a switch, button or menu item. The default setting uses the collar switch to select Transmit Secure.Ø = encrypted, O = clear When SEC is on, encrypted channels programmed for switchable encryption will transmit an encrypted signal. NOTE: The SEC switch has no eect on channels programmed as Encrypted Only or Clear Only. Channels in the Ready-to-Transmit Encrypted mode will display the symbol on the top line of the LCD.Transmit Encryption Key Selection [KEY]The radio can hold up to 64 DES or AES encryption keys. Each channel is assigned a default key for transmit. The key can be locked to the channel, or if programming allows, a transmit key other than the default key can be selected from the radio’s Key Pick List. To change an encryption key, open the KEY menu. Programmed key labels will be displayed.Select the desired key and press “ENTER”.To return the key to the pre-programmed value select “Default”.If a key is selected that has not been programmed, the radio will emit a three beep tone and display “Key Fail” before going to standby mode. The radio will not transmit but will beep and display “Key Fail” when PTT is pressed.User Selectable Encryption Keyset [KEYST]OTAR equipped radios only.Selecting a keyset from the Pick List will cause the radio to use encryption keys from the selected keyset.User selectable menu access can be assigned to a button or menu list item.To change the encryption keyset, open the KEYST menu. Programmed Keyset labels will be displayed.Select the desired keyset and press “ENTER”.
RELM Wireless Corporation- 36 -Rekey Request [RKEY]OTAR equipped radios only. On radios equipped with over-the-air rekeying (OTAR), a radio user can manually request an encryption rekey from the Key Management Facility (KMF). For a radio to receive encryption keys or keysets over-the-air, the selected channel must be designated as an OTAR channel via PC programming. Refer to your PC programming documentation for more information.To request a re-key:Open the Rekey Request menu. Press the “YES” button to Request Keys, or press “ESC” to cancel the operation.If the “YES” button is pressed while on a channel that has not been marked as an OTAR channel, the radio will beep and “NON-OTAR” will appear on the display.If a successful rekey occurs, a tone will sound, and the display will momentarily show “REKEYED”.Keyset Viewing and Selecting [KSET]OTAR equipped radios only. The radio can hold up to 8 encryption keysets. Each keyset is limited to a maximum of 64 keys. Only one keyset can be active at any time. The radio will receive messages encrypted with any of the keys in any of the keysets, but transmit keys can only be selected from the active keyset. To change an encryption keyset, open the KEYST menu. Programmed keyset labels will be displayed. Select the desired keyset and press “ENTER”.Zeroizing [ZERO]The radio provides a method for the user to “panic-zeroize” all encryption keys. Zeroizing removes all encryption keys from the radio, including keys used for OTAR and Tactical OTAR operation.Zeroize can be assigned as a button or menu list item.Open the “Zeroize Keys” menu.Press “YES” to erase all encryption keys or “ESC” to cancel the action.When successfully removed the “Keys Removed” message will momentarily be displayed.
KNG2 Portable Radio User’s Manual- 37 -Messaging Digital Conventional P25 channels can be programmed to send and receive text messages and radio status messages.Text messages can be selected from a pre-programmed list or manually entered using the radio keypad.Status messages are pre-programmed only.Text Messaging [TXT]Conventional Digital Channels Text Messaging needs to be congured in the PC Radio Editor for both tx and rx radios. Message types include predened messages, manually entered messages or locally stored messages.Predened messages - Predened messages are programmed into the radio memory using the PC Radio Editor.Manually Entered Messages - Text messages can be manually entered via the radio’s keypad.Locally Stored Messages - Up to ve manually entered messages can be stored in individual radios.Sending a MessageTo initiate a text message press the “TXT” button or select “Text Message” from the menu.Select “Send” from the menu and press “ENTER”.Select Message TypeFrom the “Select Entry Type” menu, choose the type of message to send and press “ENTER”.Predened List or Manual Entry ListWhen “Predened List” or “Manual Entry List” is selected, a list of available messages is displayed.Select the message to be sent and press “ENTER”.NOTE: When sending a predened message the message ID is transmitted. The receiving radio will display the message programmed with the corresponding ID. If the receiving radio has no programmed message with the transmitted ID, “Text Message X” is displayed, where “X” is the received ID number.
RELM Wireless Corporation- 38 -Manual EntryWhen “Manual Entry” is selected use the keypad to enter the desired message (see keypad character table). Press “ENTER” to select the target radio. Select Target RadioLast Call - Select “Last Call” to send the message to same radio you last sent a text message.Press “Send” to send the message.Call List - Selecting “Call List” opens a list aliases for the pre-programmed Unit IDs. Select the desired target radio and press “Send” to send the message.Unit ID - Select “Unit ID” to enter the P25 ID of the target radio.Use the keypad to enter the ID then press “Send” to send the messageBroadcast - Select “Broadcast” to send the text message to all text enabled radios regardless of unit ID. Press “Send” to send the message.Message AcknowledgementWhen the text message has been received by the targeted radio, an alert tone will sound and the acknowledgment message will be displayed.Press “OK” or wait for ve seconds to return to normal radio operation.If the targeted radio is unavailable, an alert tone will sound and the failed acknowledgement message will be displayed.Press “RTRY” to resend the message. Press “OK” or wait for ve seconds to return to normal radio operation.When sending a “Broadcast” message, no “text received” notication is shown. Only conrmation that the text has been broadcast will be displayed. Receiving a MessageWhen an incoming text message is received an alert tone is sounded and the Text Message Received message is momentarily displayed.The top programmed display line will alternate between the programmed setting and “Text Message” until the message is read.
KNG2 Portable Radio User’s Manual- 39 -Reading the messageTo read the message press the “TXT” button or select ‘Text Message” from the menu.Select “Read” to view the messageStored MessagesUp to ve messages can be programmed into the “Manual Entry List” and are accessed from the “Select Entry Type” menu.To store a manually entered text message press the “TXT” button or select “Text Message” from the menu.Select “Store” from the menu an press “Enter”.Use the keypad to enter the desired message then press “Enter”. (See keypad character table)Select the storage slot for the message and press “Enter” to store the message.Short Message Update [MSG]Conventional Digital Channels Short Message Update is a way for the radio to transmit an enumeration that corresponds to a predened message that is stored in other radios.User Update Messaging [STS]Conventional and Trunking Digital ChannelsSending a Status UpdateNOTE: When sending a message the message ID is transmitted. The receiving radio will display the message programmed with the corresponding ID. If the receiving radio has no programmed message with the transmitted ID “Status: Status X” is displayed, where “X” is the received ID number.Select Status MessagePress the “STS” button or select “Status Update” from the menu.From the “Select Status” menu, select the programmed message to send and press “Enter”.Select Message TypeFrom the “Select Target Type” select the type of message to be sent.Unit - Send the message to an individual radio ID.Group - Send message to a group of radios using the Talk Group ID.Dispatch - Send the message to a dispatch console.
RELM Wireless Corporation- 40 -Unit CallSelect Target RadioLast CallSelect “Last Call” to send the message to the same radio you last sent a status message.Press “Send” to send the message.Call ListSelecting “Call List” opens a list aliases for the pre-programmed Unit IDs. Select the desired target radio and press “Send” to send the message.Unit IDSelect “Unit ID” to enter the P25 ID of the target radio.Use the keypad to enter the ID then press “Send”.Group CallSelect Target Group IDSelecting “Group” opens the menu to send a status message to a group of radios with matching talk group ID.Select “Enter” to manually enter the ID or “Select” to choose and ID from the pre-programmed talk group pick list.DispatchSelect “Dispatch” to send a status message to a dispatch console.Message AcknowledgementIf the message has been received by the targeted radio, an alert tone will sound and the acknowledgment message will be displayed.If the targeted radio is unavailable, an alert tone will sound and the failed acknowledgement message will be displayed.Press “OK” or wait for ve seconds to return to normal radio operation.Receiving a Status UpdateWhen an incoming status update is received an alert tone is sounded and the status message is momentarily displayed before returning to normal operation.
KNG2 Portable Radio User’s Manual- 41 -Paging and Call Alert Conventional Two-Tone/DTMF/MDC1200 Paging [MUTE] Conventional Analog ChannelsThe KNG2 can be programmed to receive two-tone, DTMF or MDC1200 pages on conventional analog channels.Receiving a pageSelect an analog or mixed-mode receive channel.Turn on “Voice Mute” from the programmed button or menu item.When voice mute is activated the icon is displayed.The radio ignores all voice trac until the proper tone sequence is received.When a proper signal is received the radio will emit an alert tone and allow the audio to pass.If Auto Reset is programmed, the radio will return to the muted standby mode when the time conditions have been met. Call Alert Paging [ALRT] Digital ChannelsThe KNG2 can be programmed to send and receive Call Alert messages on digital channels.Sending a Call AlertPress the “ALRT” button or open “Call Alert” from the menu.Select Target RadioLast CallSelect “Last Call” to send the message to radio which you last sent or received a call alert. Press “Enter” to send the message.Call ListSelecting “Call List” opens a list aliases for the pre-programmed Unit IDs. Select the desired target radio and press “Enter” to send the Call Alert.Unit IDSelect “Unit ID” to enter the ID of the target radio.Use the keypad to enter the ID then press “Enter” to send the Call.
RELM Wireless Corporation- 42 -Receiving a Call AlertWhen a Call Alert is received, an alert tone will sound and the incoming unit ID or alias is displayed for approximately 5 seconds.The top display line will alternate between the programmed display information and a Call Alert Received message.Select “Call Alert” to reset. Radio Check [RCHK] Conventional Digital ChannelsThe KNG2 can be programmed to check the availability of a KNG2/KNG radio with a specic P25 ID. Requesting a Radio CheckPress the “RCHK” button or open “Radio Check” from the menu.Select Target RadioLast CallSelect “Last Call” to send the request to the radio which you last sent a radio check request. Press “Enter” to send the query.Call ListSelecting “Call List” opens a list aliases for the pre-programmed Unit IDs. Select the desired target ID and press “Enter” to send the query.Unit IDSelect “Unit ID” to enter the P25 ID of the target radio.Use the keypad to enter the ID then press “Enter” to send the query.If a successful handshake is performed, an alert tone will sound and the "Unit Available" message will be displayed for approximately ve seconds.If no validation is received from the targeted radio, an alert tone will sound and the "No Response" message will be displayed for approximately ve seconds.
KNG2 Portable Radio User’s Manual- 43 -Radio Inhibit/Enable [INH]/[UNINH]Conventional Digital ChannelsWith “Inhibit” is assigned to a button or menu function, a KNG2 Radio can temporarily disable other KNG2/KNG radios using the targeted radio’s unit ID number.The disabled radio can only be re-enabled by sending an “Unhibit” command.NOTE: Inhibited radios cannot be read with the PC Radio Editor.Sending a commandTo initiate an inhibit/uninhibit message press the programmed button or select from the menu.Use the keypad to enter the User or Administrator password.Press “ENTER” to open the menu.Select Target RadioLast CallSelect “Last Call” to send the message to same radio you last sent an inhibit or uninhbit message. Press “SEND” to send the message.Call ListSelecting “Call List” opens a list aliases for the pre-programmed Unit IDs. Select the desired target radio and press “SEND” to send the message.Unit IDSelect “Unit ID” to enter the P25 ID of the target radio.Use the keypad to enter the ID and press “SEND” to send the message.Message AcknowledgementWhen the message has been received by the targeted radio, an alert tone will sound and the acknowledgment message will be displayed.Press “OK” or wait for three seconds to return to normal radio operation.If the targeted radio is unavailable, an alert tone will sound and the failed acknowledgement message will be displayed.Press “RTRY” to resend the message. Press “OK” or wait for three seconds to return to normal radio operation.
RELM Wireless Corporation- 44 -Other Options and FunctionsMany operational features and functions can be programmed for user selection and control. Items can be programmed to the radio buttons or switches. In addition to these quick set buttons, a menu of multiple functions can be accessed with a “MENU” button.Backlight [LITE]Conventional and Trunked ChannelsBacklight on/o control can be assigned to a switch, button or as a menu item. In addition, backlighting may be programmed with the PC Radio Editor to illuminate when any key is pressed.Battery Life [LIFE]Conventional and Trunked ChannelsBattery Life information includes: % battery capacity available until depletion The full capacity of the battery Estimated time left before depletionBluetooth [BT]Conventional and Trunking ChannelsThe radio can be connected to approved bluetooth devices.Bluetooth options include:Bluetooth - Toggles bluetooth on/o.Discoverable - Toggles the radio's bluetooth discoverable state on/oMy Devices - Lists current and previously used bluetooth devices.Scan for Devices - Scans for discoverable bluetooth devices.This Device Info - Display's the radio's name and MAC address.Busy Channel OperationConventional Channels The radio can be programmed for dierent behavior when a conventional channel is busy.How the radio reacts to a busy channel is programmed with the following operation options only accessible in the PC Radio Editor:O - No busy channel transmit limiting will occur.Indicate - This setting will display "Busy" momentarily and an alert
KNG2 Portable Radio User’s Manual- 45 -tone will sound if conicting trac is present, but the radio is still allowed to transmit.Lockout - This setting prevents the radio from transmitting, "Busy" will be displayed and an alert will sound until the PTT is released.Override - This setting prevents the radio from transmitting. "Busy" will be displayed and an alert tone will sound until the PTT is released. However a rapid release and press of the PTT will allow the radio to transmit.Automatic - This setting will display "Busy" momentarily and an alert tone will sound. The radio will then revert back to receive mode and monitor the active receive trac. (carrier mode only)Busy Channel ConditionsWith the PC Radio Editor, each channel is programmed for the conditions under which the channel is considered busy.Conditions include:O - Channel is never declared busy.Carrier - A busy condition is declared when carrier is present on the selected Rx frequency.Non-Qualied - A busy condition is declared when a non-qualied signal is present on the Rx frequency. (Non-qualied = Incorrect CTCSS/CDCSS, talk group or NAC )Status Symbol - Digital Channels Only. A busy condition is declared if the P25 busy status symbol is present on the Rx frequency.Correct NAC - A busy condition is declared when receiving digital signal with the correct NAC, and declared not busy under all other conditions.Channel Select [CHAN]Conventional and Trunked Channels Channel Selection can be assigned to a button or menu item. (See Channel/Zone Selection Options for details.)Cloning [CLON]Conventional ZonesKNG2 radios can be set up to send or receive programmed information from other BK Radio products via a cloning cable available from RELM Wireless. Cloning can be assigned to a button. Refer to the cloning cable manual for cloning information.
RELM Wireless Corporation- 46 -ContrastConventional and Trunking ChannelsAllows the user to adjust the contrast of the screen. Select the desired contrast using the -/+ buttons.Press "ENTER" to set the contrast.Control Lockout [LCK]Conventional and Trunking ChannelsThe KNG2 portable oers a variety of control lock options. Control lock can be assigned to a toggle switch, collar switch or as a button or menu item.Switch AssignmentWhen assigned to a toggle switch, toggling the switch on locks all controls except the toggle switches, PTT and volume/o.When assigned to the collar switch, toggling the switch on locks all controls except the collar switch, PTT and volume/o.Button/Menu AssignmentWhen assigned as a button or menu item, users can select from two lockout settings, “Lock Keypad Only” and “Lock All Controls”.“Lock Keypad Only” locks only front panel button operations.“Lock All Controls” locks all buttons and switches as determined by radio programming. Any or all of the following function may be locked when “Lock All Controls” is selected: Front keypad, side top buttons, toggle switches, channel knob, collar switch and push-to-talk.To enable the lock function press the assigned button or open the menu and select Control Lock from the list.Select the desired lockout setting and press “ENTER”To disable Control Lock press the diamond button twice, then the square button twice.Date and Time [DATE]Conventional and Trunked ChannelsDisplays the date and time. The edit button allows the user to change the date and time. The time will stay stored in the radio when powered o.
KNG2 Portable Radio User’s Manual- 47 -Global Positioning [GPS]Conventional and Trunked Channels (Requires GPS Option KZA0589 or KAA0589)To access GPS functions press the “GPS” button or select “GPS” from the menu.Viewing GPS informationTo view current coordinates open the GPS menu and select “GPS Information”. After acquisition, the current location is displayed in degrees, minutes and seconds.Sending GPS informationGPS information is sent by a variety of triggers only accessible in the PC Radio Editor:PTT - After a digital transmission, the GPS coordinates will be automatically transmitted.Periodic - GPS coordinates are transmitted periodically using a programmed time.Emergency - GPS coordinates are sent if the radio activates emergency.Power on/o - GPS coordinates are sent once the radio powers up and acquires a position and also on power o.User Request - To send GPS information, open the GPS menu and select “Transmit Request”. From the Request menu select the desired target ID and press “Enter”.Hard Power Down [PWRD]Conventional and Trunking ChannelsWhen pressed, turns the radio completely o.Home [HOME]Conventional and Trunking ChannelsWhen pressed, the radio returns to a preprogrammed channel that is congured in the PC Radio Editor.
RELM Wireless Corporation- 48 -Keypad ProgrammingConventional Systems and ChannelsMuch of the information stored in the KNG2 can be edited using the keypad. Five separate programming functions can be enabled with the PC Radio Editor.Keypad programming selections can only be assigned as a menu item.Refer to the Keypad Programming section for detailed information on how to edit programmed radio information.Minimum Volume [VOL]Conventional and Trunking ChannelsMust be congured as "Customizable" in the PC Radio Editor to access through the radio. When pressed, changes the volume level at lower volumes. This allows the user to set their minimum volume to an audible level.Monitor [MON]Conventional ChannelsThere are three settings available for monitoring trac on a selected channel. “Monitor” can be assigned to a button or as a menu item.Monitor Modes and IndicatorsO - Squelch works as congured. (No indicator)On - Only carrier squelch is in eect. NAC and CxCSS and TGID are all ignored. Steady on.Open - No squelch is taking place. If there is no signal, the audio will be static. Solid on.Button Operation - A quick press will toggle between O and On, while a long press will turn on "Open" mode and short press will return the radio to O mode.Menu Operation - Open the Monitor menu, select the desired operation and press “Enter”.Nuisance Channel Delete [DEL]Conventional ChannelsIf enabled, a nuisance channel can be temporarily removed from the scan list. Nuisance Channel Delete can only be assigned to a button.To temporarily remove a channel from the scan list, press the assigned button while the nuisance channel is being received.To revert to the programmed scan list, turn o Scan, cycle radio power or select another zone or channel.
KNG2 Portable Radio User’s Manual- 49 -Phone [PHN] and Hang Up [HANG]Conventional ChannelsThe Phone function is a way for a conventional radio to instruct the system to dial a phone number and begin a call with that radio. Using the Hang Up button allows the user to end that call. Radio Accountability Tone [RAT]Conventional and Trunked ChannelsThe Radio Accountability Tone transmits a preprogrammed sequence of DTMF tones when the RAT button is pressed and held. Must be programmed with a Radio Accountability Tone ID in the PC Radio Editor.Radio infoConventional and Trunking ChannelsInformation about your radio can be viewed via the “Radio Info” menu item.To review the information, open the Radio Info menu. Use the NEXT or PREV to view individual items.Radio Info information includes:UID - P25 Unit ID.IP - IP Address of the radio.OTAR Registered - Acknowledges if radio is registered to an OTAR system.Up Time - Amount of time the radio has been on.Repeater Talkaround [T/A]Conventional ChannelsIn Repeater Talkaround mode, the radio will transmit on the programmed receive frequency of the selected channel. When T/A is enabled the icon will be displayed on the top line of the LCD. NOTE: Channels programmed as receive only are not aected by the Talkaround selection.Talkaround selection can be assigned to a switch, button or as a menu list item.Send Alert Tone [SNDT]Conventional and Trunking ChannelsWhen pressed and held, the radio will transmit a 781.3Hz tone for the programmed duration. Duration can be set in the range from 0.5 to 5 seconds.
RELM Wireless Corporation- 50 -Send Signal [SEND]Conventional Analog ChannelsActivated by a long-press and is the 5-tone equivalent to emergency alarm. ANI Mode needs to be set to ve-tone. Holding this button will send the ve-tone signal.Squelch Adjust [SQL]Conventional ChannelsSquelch Adjust is used to change the signal strength required for the radio’s speaker to unmute.Squelch can be assigned as a button or menu list item.To adjust the squelch setting, open the squelch menu. Select the desired threshold using the -/+ buttons.Press “ENTER” to set the level.Site Display [STDS]Trunking ChannelsWhen selected, the Site Display functions shows information for the currently operating site.Displayed information includes: Site ID, Site Alias and RSSI.Site Display can be assigned as a button or menu list item.Site Lock [STLK]Trunking ChannelsSite lock prevents the radio from searching for other sites by locking it to the currently selected site.Site Lock can be assigned as a button or menu list item.Site Search [STSR]Trunking ChannelsSite Search automatically searches and selects the best available trunking site.Site Lock can be assigned as a button or menu list item.
KNG2 Portable Radio User’s Manual- 51 -Surveillance Mode [SURV]Conventional and Trunking ChannelsWhen Surveillance Mode is on, all audible indicators (beeps etc.) and lighting functions (LEDs and Display) are disabled. Surveillance Mode can a switch, button or as a menu list item.System TestConventional and Trunking ChannelsThe KNG2 portable oers a variety of system tests when connected to the appropriate test equipment. Select the appropriate test and follow the onscreen prompts.Transmit Digital [TXAD]Conventional Mixed-Mode Transmit ChannelsWhen Transmit Digital is on, channels programmed for mixed-mode transmit will transmit in digital mode. When o, mixed-mode channels transmit in analog mode.When transmitting in digital mode the display shows ‘D’ behind the TX indicator. In analog transmit, ‘A” will follow the indicator.Transmit Digital selection can be assigned as a button, switch or menu list item.When assigned as a button function, the “TXAD” button will be highlighted when in the Transmit Digital mode.Transmit Power [PWR]Conventional and Trunking ChannelsTransmit Power can be selected between the programmed high and low settings. The power output of the settings depend on radio options, model and editor settings.When operating in the high power mode, “H” will be displayed on the top line of the LCD. In low power mode, “L” is displayed.Power selection can be assigned as a button, switch or menu list item.Two-Tone Select [TONE]Conventional Analog ChannelsAllows the user to select from their two-tone list (programmed with the PC Radio Editor). Selecting an item will send the two-tone signal.
RELM Wireless Corporation- 52 -VersionsConventional and Trunking ChannelsVersion information about your radio can be viewed via the “Versions” menu item.To review the information, open the Versions menu. Use the NEXT or PREV to view the installed revisions of individual items.Version information includes: Date: Date of release. Release: Overall release code. Software: Release code for ARM. DSP: Release code for DSP. File Format: Currently installed le format. BSP: Release code of installed BSP rmware. PCB Revision: Installed printed circuit board revision number. Date of Manufacture: Date of manufacture. C-ACE: Version of encryption module.Current version information can be found in the service section at www.relm.com.Zone Select [ZONE] (Conventional and Trunked Channels)Zone Select allows the radio user to switch between programmed channel zones.The Zone Select operation can be assigned as a button, switch or menu list item..When Zone is assigned to a button, press the button to open the menu of available zones. When assigned as a menu item, open the menu as described in the Navigation section.Select the Zone you want to use.Press “ENTER” select the Zone.Also, If enabled, a zone can also be accessed directly from the keypad.(Refer to your PC Radio Editor documentation.)(See also, Channel/Zone Selection Options.)
KNG2 Portable Radio User’s Manual- 53 -Keypad ProgrammingRadio programming is to be performed only by authorized personnel. Any or all functions may be password protected to prevent unauthorized access. Check with your communications ocer for information on the programmed functions of your radio.NOTE: Trunking channels and systems cannot be programmed via the radio keypad.Keypad programmable categories include individual Channel, Zone and Global radio parameters, individual P25 ID Quick Call/Receive List, User Tone List, User NAC List and User Talk Group ID List.Check with your RELM/BK Radio dealer or communications ocer for information on the programmed functions of your radio.Keypad Programming NavigationWhile in programming mode the diamond, arrow up, arrow down and square buttons are used navigate the programming functions. The following table shows possible button functions:Keypad Programming ButtonsENT Opens the highlighted function or enters the displayed informationESC Press once to go back to previous screen or hold to exit programming mode and return to normal radio operationNEXT Move to the next item in a displayed list or the next character in a displayed valuePREV Move to the previous item in a displayed listEDIT Used to select and edit individual characters in a displayed valueBACK Move to the previous character in a displayed valueCLR Clears the displayed valueEDIT Used to edit individual characters in a displayed valueINV Inverts a displayed digital tone value (CDCSS)
RELM Wireless Corporation- 54 -Entering Keypad Programming ModeTo enter programming mode open the menu list by pressing the assigned “Menu” button and select “Keypad Prog” from the menu list.Use the keypad to enter the six-digit user or master password and press the Enter button.Select the item to program and press Enter.Available programmable functions are:Keypad - Used to edit individual channel and zone information such as labels, frequencies, operating modes, etc.Call List - Used to edit the P25 ID Call List entries.User Tones - Used to edit the user selectable Code Guard entries.User NACs - Used to edit user selectable Network Access Codes.User TGIDs - Used to edit user selectable P25 Talk GroupsNOTE: Depending on PC programming, not all functions may be accessible for keypad programming.Global, System, Zone and Channel ParametersThe “Keypad” programming menu consists of four sub-menus for editing global, system, zone and channel parameters (see table).Keypad Programming Sub-MenusGlobal System Zone ChannelDisplay Top Sys Pri 1 Add/Delete Add/Delete Rx/Tx NACDisplay Middle Tx on Pri 1 Label Label Sq ModeDisplay Bottom Sys Pri 2 Zone Pri 1 Rx/Tx Freq BandwidthUser Password Tx on Pri 1 Rx/Tx Mode Tx PowerZone Pri 2 Rx/Tx Guard TGIDGlobal SettingsTo edit the programmable Global settings, select “Keypad” from the programing menu then select “Global” from the sub-menu.Select the item you wish to edit from the Global menu.Displayed Information LinesThe three main display lines can be programmed with the PC Radio
KNG2 Portable Radio User’s Manual- 55 -Editor to display radio information. Select top, middle or bottom line to change its displayed information. Then select the desired setting from the list (see table).NOTE: Display changes do not aect the display on trunked channels.Conventional Display Line OptionsNone No information is displayed.Channel Label Alphanumeric label of currently selected channel or active scanned channel.Channel Number Channel number of currently selected channel or active scanned channel.Channel # and Zone Currently selected channel numbers and zone.Date and Time Displays date and time.DTMF* Displays the numeric DTMF tones of received signal.Frequency* Operating frequency of currently selected channel or active scanned channel.MDC* Displays the numeric MDC ID or received signal DT MF.Radio Name Displays radio name.Received TGID P25 Talk Group ID of the radio transmitting the message currently being received.Rx’d Unit ID P25 ID of a received digital signal. If the incoming ID is programmed in your Unit ID Call List list, the associated label will be displayed. During standby you radio ID number is displayed.Rx/Tx Key Currently selected encryption key.Rx Picklist Selections* NAC, TGID or Code Guard currently selected from the programmable RX Pick Lists.Subaudible* Displays CxCSS value of received signal.Tx Picklist Selections* NAC, TGID or Code Guard currently selected from the programmable TX Pick Lists.Unit ID Shows your P25 Unit IDWhile receiving, the ID of the radio transmitting the message is displayedIf the received ID is programmed in your radio's Call List, the corresponding label will be displayedZone Label Label of currently selected zone.Zone and Channel # Currently selected zone and channel numbers.Zone Number Currently selected zone number.*Conventional Channels Only
RELM Wireless Corporation- 56 -User PasswordSelect “User Password” from the “Global” menu to edit the keypad programming password. Enter a six-digit numeric.NOTE: Changing the user password does not aect the power-up or administrator password. System SettingsTo edit the programmable System settings, select “Keypad” from the programing menu then select “System” from the sub-menu.Select the item you wish to edit from the System menu.System Priority 1 or 2 ChannelPriority channels can be assigned on a system wide basis. If assigned, a system priority channel will be monitored during priority scan regardless of the current operation zone priority channel.When set to “O”, the Priority 1 or Priority 2 Channel is designated by the selected zone setting. When set to “Use Main” the channel selected by the channel knob operates as the priority channel.To designate a specic priority channel choose “Select” from the priority channel menu.Select the Zone and Channel.Tx on Priority 1 ChannelIf on, the radio will transmit on the System Priority 1 channel whenever Priority Scan is on.Zone SettingsTo edit the programmable Zone settings, select “Keypad” from the programing menu then select “Zone” from the sub-menu.Select Add, Delete or Edit Zone from the Zone menu.Add ZoneWhen selected, a new zone is added in the next available slot.Example: If there are seven zones in the radio, the added zone will be zone eight.
KNG2 Portable Radio User’s Manual- 57 -Delete ZoneWhen selected the list of available zones is displayed. Choose the zone you wish to delete. When a zone is removed all subsequent zones move up one spot. Example: If there are seven zones in the radio and zone ve is deleted, zone six now becomes zone ve and zone seven becomes zone six. Edit ZoneSelect “Edit Zone” to change the programmable zone information.Zone LabelUse the keypad to enter a label of up to sixteen characters. (See keypad character table)Zone Priority 1 or 2 ChannelNOTE: If system priority channels are programmed, zone priority settings are ignored.When set to “O”, the Priority 1 or Priority 2 Channel is designated by the selected zone setting. When set to “Use Main” the channel selected by the channel knob operates as the priority channel.To designate a specic priority channel choose “Select” from the priority channel menu and choose from the channel list.Zone Tx Priority 1 ChannelIf on, the radio will transmit on the Zone Priority 1 channel whenever Priority Scan is on and there is no system priority 1 programmed.Channel SettingsTo edit the programmable Channel settings, select “Keypad” from the programing menu then select “Channel” from the sub-menu.Select Add, Delete or Edit Channel from the Channel menu.NOTE: REFER TO THE COMMAND ZONE OPERATIONS SECTION FOR ADDING OR DELETING COMMAND ZONE CHANNELS.DO NOT ADD OR DELETE COMMAND ZONE CHANNELS VIA THE KEYPAD PROGRAMMING METHOD.
RELM Wireless Corporation- 58 -Add ChannelSelect to add a new channel.Choose the zone to which the channel is to be added.Enter a valid channel index number of 1-5000. NOTE: To access channels above channel sixteen, the radio must be programmed via PC for keypad channel select or “Channel Select” must be assigned as a button or menu item.Delete ChannelWhen selected the list of programmed zones is displayed. Choose the zone of the channel you wish to delete. Select the channel from the list.Edit ChannelSelect “Edit Channel” to change the programmable channel information.Select the zone and channel to be edited.Channel Label Use the keypad to enter a label of up to sixteen characters. (See keypad character table)Rx Frequency Enter a valid receive frequency in MHz. Frequencies must be divisible by 1.25kHz.Rx Mode Select Analog, Digital or Mixed Mode.Rx Guard Analog or Mixed Mode Receive Channels OnlySelect “O” for analog signals to operate in carrier squelch mode.Select “Tone” to enter a CTCSS tone, Select “Digital” to enter a DCS value.Use “INV” to invert a DCS tone.RX NAC Digital or Mixed Mode Receive Channels OnlySelect “Enter” to program a receive NAC via the keypad. Enter the desired value in hexadecimal (000 - FFF).
KNG2 Portable Radio User’s Manual- 59 -NOTE: $F7F is an invalid receiver NAC.Choose “Select” to use a receiver NAC from the programmed pick list.Squelch Mode Digital or Mixed Mode Receive Channels OnlyNormal - Requires carrier and NAC only to unmute digital signals.Selective - Required for Individual Calls and use of Talkgroup IDs. Requires a matching TGID to unsquelch.Bandwidth Analog or Mixed Mode Channels OnlyNarrowband - 12.5kHz spacing when operating in analog.Wideband - 25kHz spacing when operating in analog.Tx Power Low Power - Lock channel in low power mode.High Power - Lock channel in high power mode.Selectable - Allow high/low transmit power selection form assigned button, switch or menu item.Tx Frequency Enter a valid receive frequency in MHz. Frequencies must be divisible by 1.25kHz.Tx Mode Select Analog, Digital or Selectable.Tx Guard Analog or Mixed Mode Receive Channels OnlySelect “O” for analog signals to operate in carrier squelch mode.Select “Tone” to enter a CTCSS tone, Select “Digital” to enter a DCS value.Use “INV” to invert a DCS tone.Tx NAC Digital or Mixed Mode Transmit Channels OnlySelect “Enter” to program a transmit NAC via the keypad. Enter the desired value in hexadecimal (000 - FFF).
RELM Wireless Corporation- 60 -NOTE: $F7E and $F7F are invalid transmit NACs.Choose “Select” to use a transmit NAC from the pick list.TGID Digital or Mixed Mode Channels OnlySelect “Enter” to program a transmit Talk Group ID via the keypad. Enter the desired value (1- 65535). NOTE: 0 is an invalid transmit Talk Group ID.Choose “Select” to use a TGID from the pick list.P25 ID Unit Call/Receive ListThe KNG2 can be pre-programmed with up to 100 Project 25 IDs and labels. If ‘RX’d Unit ID’ is designated as a display line, the P25 ID of the radio sending the call will be shown when receiving a digital signal. If the P25 ID of the received call is programmed in the Call List, the alphanumeric label associated with the ID will be displayed. If the P25 ID is not in the Call List, the numeric P25 ID will be displayed.Select “Call List” from the programing menu.Select the P25 ID you wish to edit.The display shows the label and P25 ID of the selected ID.Select “Label” to edit or add an alphanumeric label.Select “Dest ID” to change the P25 ID.User Selectable Code GuardsThe KNG2 can be pre-programmed with up to 32, user selectable, CTCSS or CDCSS subaudible tones. Tones are selected via a programmed button or menu item (see TX/RX CxCSS Picklist). If enabled, the tones can be programmed via the radio’s keypad. Select “User Tones” from the programing menu.Select the tone to edit.To enter a CTCSS tone select “Tone” and enter the desired frequency in Hertz (67.0 - 254.1 Hz). To enter a CDCSS (digital) tone select “Digital” then enter the three digit
KNG2 Portable Radio User’s Manual- 61 -code. Use the INV button to invert the code. The following tables show the standard values for tone and digital. Any value can be entered in keypad programming. The user is not restricted to these values.Valid Code Guard Tone ValuesGroup A Group B Group C67.0 (XZ) *151.4 (5Z) 71.9 (XA) 146.2 (4B) 74.477.0 (XB) 162.2 (5B) 82.5 (YZ) 156.7 (5A) 79.788.5 (YB) 173.8 (6A) 94.8 (ZA) 167.9 (6Z) 85.4 (YA)*100.0 (1Z) 186.2 (7Z) 103.5 (1A) *179.9 (6B) 91.5 (ZZ)107.2 (1B) 203.5 (M1) 110.9 (2X) 192.8 (7A)114.8 (2A) 218.1 (M3) *118.8 (2B) 210.7 (M2)123.0 (3Z) 233.6 127.3 (3A) 225.7 (M4)131.8 (3B) 250.3 136.5 (4Z) 241.8141.3 (4A)* 50/60 Hz power distribution systems could cause falsing.The assignments in a given area should be made from within one of the Groups: A, B, or C.Valid Digital Code Guard Values023 025 026 031 032 043 047 051 054065 071 072 073 074 114 115 116 125131 132 134 143 152 155 156 162 165172 174 205 223 226 243 244 245 251261 263 265 271 306 311 315 331 343346 351 364 365 371 411 412 423 431432 445 464 465 466 503 506 516 532546 565 606 612 624 627 631 632 654662 664 703 712 723 731 732 734 743754
RELM Wireless Corporation- 62 -User Selectable Network Access CodesThe KNG2 can be pre-programmed with up to 32, user selectable NACs. NACS are selected via a programmed button or menu item (see TX/RX Network Access Code Picklist). If enabled, the tones can be programmed via the radio’s keypad.Select “User NACs” from the programing menu.Select the NAC to edit.Enter the desired value in hexadecimal (000 - FFF). NOTE: $F7E and $F7F are invalid as user selectable NAC values.User Selectable Talkgroup IDsThe KNG2 can be pre-programmed with up to 32, user selectable TGIDs. TGIDs are selected via a programmed button or menu item (see Talk Group ID Picklist). If enabled, the TGIDs can be programmed via the radio’s keypad.Select “User TGIDs” from the programing menu.Select the Talk Group ID to edit.Enter the desired value (1 - 65535). NOTE: A Talk Group ID value of 0 is not allowed.WarrantyThe KNG2 portable radio is covered by a two-year warranty. Extended warranties may be available. For information about your warranty contact RELM/BK Radio at (800) 648-0947. Email; sales@relm.comIf you need service, contact your BK Radio dealer. If you nd it impractical to have service provided by your dealer, contact the RELM/BK Radio Technical Service Department at (800) 422-6281.Repairs may be sent to the address below.RELM Wireless CorporationAttention: Customer Service7100 Technology DriveWest Melbourne, FL 32904
KNG2 Portable Radio User’s Manual- 63 -Keypad Text/Programming Characters11ABC2A, B, C, a, b, c, 2DEF3D, E, F, d, e, f, 3GHI4G, H, I, g, h, i, 4JKL5J, K, L, j, k, l, 5MNO6M, N, O, m, n, o, 6PQRS7P, Q, R, S, p, q, r, s, 7TUV8T, U, V, t, u, v, 8WXYZ9W, X, Y, Z, w, x, y, z, 900, Blank Space**, ., ,, ;, :, ", ', !, ?, %, &, ', ~, @, _##, $, +, -, =, ^, /, \, |, <, >, {, }, [, ]
RELM Wireless Corporation- 64 -My Radio SettingsSerial # ID#Conv. TrunkedCollar SwitchLeft ToggleRight ToggleOrange ButtonTop SideMiddle SideBottom SideDiamondUp ArrowDown ArrowSquareMenu SettingsConv. Trunked

Navigation menu