REYAX TECHNOLOGY RYLR896 LoRa device User Manual RYLR896 ENx
REYAX TECHNOLOGY CO.,LTD. LoRa device RYLR896 ENx
Manual
29-JAN-2018 56312E33 RYLR896 UART Interface 868/915MHz Lora Antenna Transceiver Module Datasheet RYLR896 868/915MHz Lora Antenna Transceiver Module PRODUCT DESCRIPTION The RYLR896 transceiver module feature the Lora long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption. FEATURES • • • • • • • • Semtech SX1276 Engine Excellent blocking immunity Low receive current High sensitivity Control easily by AT commands 127 dB Dynamic Range RSSI Designed with PCB integrated antenna AES128 Data encryption APPLICATIONS • • • • • IoT Applications Mobile Equipment Home Security Industrial Monitoring and Control Equipment Car Alarm Copyright © 2017, REYAX TECHNOLOGY CO., LTD. RYLR896 868/915MHz Lora Antenna Transceiver Module PIN DESCRIPTION Pin Name I/O Condition VDD Power Supply NRST RESET(Active Low) RXD UART Data Input TXD UART Data Output NC GND Copyright © 2017, REYAX TECHNOLOGY CO., LTD. Ground RYLR896 868/915MHz Lora Antenna Transceiver Module BLOCK DIAGRAM RYLR896 SPECIFICATION Item Min. Typical Max. Unit VDD Power Supply 2.8 3.3 3.6 RF Output Power Range -4 15 dBm Filter insertion loss dB RF Sensitivity -148 VDD dBm RF Input Level Frequency Range Condition 903 Frequency Accuracy ±2 Communication Range 4.5 Transmit Current 10 dBm 927.5 MHz ppm 15 KM Depend on RF parameter 43 mA RFOP = +15 dBm Receive Current 16.5 mA AT+MODE=0 Sleep Current 0.5 uA AT+MODE=1 Digital Input Level High 0.7*VDD VDD VIH Digital Input Level Low 0.3*VDD VIL 0.9 VDD VOH 0.1 VOL 300 Cycles Digital Output Level High Digital Output Level Low Cycling (erase / write) EEPROM data memory Weight Copyright © 2017, REYAX TECHNOLOGY CO., LTD. RYLR896 868/915MHz Lora Antenna Transceiver Module Operating Temperature -40 25 +85 ˚C DIMENSIONS Unit : mm Copyright © 2017, REYAX TECHNOLOGY CO., LTD. RYLR896 868/915MHz Lora Antenna Transceiver Module Unit : mm Copyright © 2017, REYAX TECHNOLOGY CO., LTD. RYLR896 868/915MHz Lora Antenna Transceiver Module USER MANUAL The following statements should be inside the user manual of the final products that contains this module: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Copyright © 2017, REYAX TECHNOLOGY CO., LTD. RYLR896 868/915MHz Lora Antenna Transceiver Module FCC Label Instructions The outside of final products that contains this module device must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: QLYRYLR896” or “Contains FCC ID: QLYRYLR896.” Any similar wording that expresses the same meaning may be used. Additionally, there must be the following sentence on the device, unless it is too small to carry it: “This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” Taiwan: China: s http://r Copyright © 2017, REYAX TECHNOLOGY CO., LTD.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 8 Page Mode : UseNone XMP Toolkit : 3.1-701 Producer : Nuance PDF Create Creator Tool : Microsoft Word - User manual_RYLR896_EN.docx Create Date : 2018:09:04 16:33:36+08:00 Modify Date : 2018:09:04 16:33:48+08:00 Metadata Date : 2018:09:04 16:33:48+08:00 Format : application/pdf Title : Microsoft Word - User manual_RYLR896_EN.docx Creator : changja Document ID : uuid:e86c7906-bc71-0ac1-5d61-f806acd23bd3 Instance ID : uuid:c3ad4fe7-9a33-ee6a-5bb7-6040663de706 Language : en-US Author : changjaEXIF Metadata provided by EXIF.tools