RF Controls ITCSA104 RF ID Signal Acquisition & Source Location unit ITCS104 User Manual 11001 011 REV0v92

Download:
Mirror Download [FCC.gov]
Document ID	1129485
Application ID	BOSBYXHA21F3yn5sqtcWhQ==
Document Description	User Manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.29kB (28632 bits)
Date Submitted	2009-06-25 00:00:00
Date Available	2009-06-25 00:00:00
Creation Date	2009-05-20 10:43:30
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2009-05-20 10:43:30
Document Title	Microsoft Word - 11001-011-REV0v92.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	mpierce

DATASHEET – ITCS-A-102
Signal Acquisition and Source Location (SASL) unit,
4x4 Antenna System
16 element phased array antenna system for use
with ISO 18000-6C / EPC Gen 2 RFID tags.
System Overview
Description
The 4x4 Antenna System is a single panel steerable phased array RFID system. The
4x4 Antenna System is comprised of two “2x4” Beam Steering Units (BSU’s), a
system controller, an RFID reader, a power supply, and the mechanical framework to
allow the system to be mounted in a factory environment. See the ITCS description
for a full system description.
Interfaces:
Data Connector – RJ45 10/100 Ethernet
Power Connector – IEC-320
Indicators:
Power LED (Green = power on, Off = power off)
Data LED / Ethernet Link (Yellow = Link, Off = No Link, Blink = Data Tx/Rx)
Specifications
Performance Specifications:
Tag read period1
Tag location accuracy2
Scan Angle – Horizontal
Scan Angle – Vertical
Beam width
Power Level3
Antenna Gain
Min
-30
-30
0.04
7.2
Max
25
3 (0.9)
30
30
8.6
Power Requirements
Voltage
Frequency
Current – 115Vac
Current – 230Vac
Min
90
47
Max
264
63
3.2
1.7
Units
ms
ft(m)
Degrees
Degrees
Degrees
W-EIRP
dBi
Units
Vac
Hz
Arms
Arms
Time to read one tag, given a Q of 0 (tag population of 1). System is turned on and enabled.
Accuracy using two SASL’s mounted 30’ apart, 11’ high’ covering the same area.
Calibrated power level settable in firmware.
11001-011 v0.92
Page 1 of 2
RF Controls, LLC - Confidential
DATASHEET – ITCS-A-102
Mechanical Specifications
Min
Height
Width
Depth
Weight
Max
81 (32)
81 (32)
20 (8)
23 (50)
Units
cm (in)
cm (in)
cm (in)
kg (lbs)
Installation requirement: The antenna must be fixed and not allowed to move after
installation. See User’s Manual for further instructions.
Environmental Specifications
Operating Environment
Humidity Range (non-condensing)
Temperature Range (operating)
Temperature Range (non-operating)
Temperature Drift before Recalibration4
Shock (operating)
Shock (non-operating)
Min
Max
Units
Indoor industrial factory use.
85
%RH
0 (32)
55(131) ˚C (˚F)
-40(-40)
85(185) ˚C (˚F)
-10(-18)
10(18)
˚C (˚F)
Regulatory Certifications
FCC Part 15 at system level
Subpart B EMC
ETSI 302-208, CE
This system is calibrated at nominal room temperature. Should the temperature exceed this limit, location
errors may be out of tolerance. The system may need to be recalibrated at the new nominal temperature.
11001-011 v0.92
Page 2 of 2
RF Controls, LLC - Confidential

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Format                          : application/pdf
Title                           : Microsoft Word - 11001-011-REV0v92.doc
Creator                         : mpierce
Create Date                     : 2009:05:20 10:43:30-05:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:05:20 10:43:30-05:00
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:0711455a-77fe-48d0-b06c-ca9488243b9a
Instance ID                     : uuid:21fd21a5-0448-4dca-96be-ee38953c1cd2
Page Count                      : 2
Author                          : mpierce

EXIF Metadata provided by EXIF.tools