RF Ideas LC758X RFID Card Reader User Manual Quick Start Guide

RF Ideas Inc RFID Card Reader Quick Start Guide

Contents

Quick Start Guide

QUICK  START GUIDE                     pcProx® and pcProx® Plus Badge Readers
     This document provides the following information:  I.  Connector Options II.  Installing the Configuration Utility Software III.  Reader Setup IV. Configuring the Reader V.  Troubleshooting                         RF IDeas pcProx® and pcProx® Plus Readers Congratulations on the purchase of your pcProx®  or pcProx®  Plus reader! Configuration of RF IDeas readers is easy. With our “plug and play” design, you will be able to quickly take advantage of a more secure environment in your business, school, or organization.  RF IDeas products are an integral part of a variety of solutions in every market such as healthcare, manufacturing, government, enterprise and  other markets. The number of applications is ever-increasing and we maintain a strong relationship with our robust list of software partners and resellers which are readily found on our website.  Please contact our Sales department if you have any questions or are interested in our OEM and Independent Developers programs.  For more details about our product line, please visit www.RFIDeas.com/knowledge-center or follow the Support > Learning Center link for more details about our various products.  Thank you,  The RF IDeas team  CONTACT INFORMATION Phone: +1 (847) 870-1723 Toll Free: (866) 439-4884 Fax: (847) 483-1129 Email:  Sales@RFIDeas.com Support: TechSupport@RFIDeas.com  ADDRESS RF IDeas, Inc. 4020 Winnetka Avenue Rolling Meadows, IL 60008, USA        2
3       1.  Connector Options There are two connector options available with the reader for data input and output.   The product you have purchased may need to be configured before use. The configuration software and support documents can be downloaded from our product support page at: http://www.rfideas.com/support/product-support  The configuration section details the steps necessary to install the configuration utility software and update the configuration to meet your requirements.   2.  Installing the Configuration Utility Software To install the configuration utility software, complete the following steps:  1. Verify the system meets the following minimum requirements:  • Hardware — Pentium class PC  • Memory — 32 MB RAM  • Disk — 25 MB hard disk space  • I/O — 1 available DB9 or USB port, dependent upon the connector  • Operating System – Any operating system that supports a USB keyboard including Microsoft Windows XP®, 7®, 8®, 10® and Linux. Can be used for keystroke applications.  2. Install the pcProx Configuration Utility from the following Web page: http://www.RFIDeas.com/Software/pcProxConfig/   3.  Reader Setup To set up the reader:  3. Plug the connector into the workstation’s (or available on any peripheral) open RS-232, USB, or Ethernet plug.  4. Place the device next to the monitor, beside the workstation, or where appropriate.  5. The workstation should detect new hardware for USB and DB9 connections. Verify the workstation recognizes this connection using Device Manager.  6. For RS-232 products, verify the correct COM port for RS-232 DB9 connections using Windows Device Manager.   Connector Type Output Data Type USB USB Keystroke SDK Virtual Com Port: ASCII or SDK DB9 ASCII SDK
4       4.  Configuring the Reader To configure the Reader for operation, complete the following steps:  7. Start the pcProx Configuration Utility software.  8. Plug the reader into the workstation’s USB or DB9 port.  a. If the reader has a USB connector, verify the workstation detected the connection automatically using Windows Device Manager. b. If the reader has a DB9 connector, verify the correct COM port using Windows Device Manager. 9. If your reader requires a custom configuration, refer to the pcProx Plus/pcProx Enroll Manual for detailed information on the configuring the reader. The manual is available at www.RFIDeas.com > Support > Product Manuals.  10. After the configuration settings are correctly configured and written/saved to the device, unplug the reader.  The reader is now ready for use.   Troubleshooting If the device is not working or the following error message is displayed:  11. Check to be sure the device is connected to the USB or RS-232 port. When the workstation is on and no card is being read, the LED is red. A valid proximity card causes the LED to turn green, provided the configuration is not set to only read certain bit lengths.  12. Only one COM port application can own the RS-232 port at a time. Make sure there is not another COM port application running. This prevents our software from seeing the device.  13. Verify the correct model and the software configuration screen agrees with the device attached.  14. Verify the port agrees with the workstation connector.  15. If the device still does not work, disconnect it, remove ‘General USB Device’ using Windows ‘Control Panel’ a ‘Add/Remove’ Hardware. Then reboot the workstation. When the workstation boots up, re-attach the device USB and the OS should re-install the Windows driver automatically.  If the device does not read the card, contact the card manufacturer/vendor to verify that the card type is compatible with the device model.        Radio Waves Desktop Reader  Contactless Badge
5     License Agreement and End-User License Agreement  End-User  License  Agreement  for  RF  IDeas™  SOFTWARE  and HARDWARE - RF IDeas’ pcProx®, Proximity Activated Readers, Software Developer’s Kit, and Proximity Reader DLLs, and Protocol(s).  IMPORTANT-READ CAREFULLY: This End-User License Agreement (“EULA”) is a legal agreement between you (either an individual or a single entity) and the manufacturer RF IDeas (“Manufacturer”) with which you acquired the RF IDeas software and hardware product(s) identified above (“PRODUCT”). The PRODUCT includes the RF IDeas reader, computer software,  the  associated  media,  any  printed  materials,  and  any  “on line” or electronic documentation. The SOFTWARE PORTION OF THE PRODUCT includes the computer software, the associated media, any printed  materials,  and  any “on line”  or  electronic  documentation. By installing, copying or otherwise using the PRODUCT, you agree to be bound by the terms of this EULA. If you do not agree to the terms of this EULA, RF IDeas is unwilling to license the PRODUCT to you. In such event, you may not use or copy the SOFTWARE PORTION OF THE PRODUCT, and you should promptly contact the vendor you obtained this PRODUCT from for instructions on return of the unused product(s) for a refund.  The products described in this publication are intended for consumer applications.  RF  IDeas  assumes  no  liability  for  the  performance  of product.  RF  IDeas  products  are  not  suitable  for  use  in  life-support applications, biological hazard applications, nuclear control applications, or radioactive areas. None of these products or components, software or hardware, are intended for applications that provide life support or any critical function necessary for the support of protection of life, property or business interests. The user assumes responsibility for the use of any of these products in any such application. RF IDeas shall not be liable for losses due to failure of any of these products, or components of these products, beyond the RF IDeas commercial warranty, limited to the original purchase  price.  SOFTWARE  PRODUCT  LICENSE:  The  PRODUCT  is  protected  by copyright  laws  and  international  copyright  treaties,  as  well  as  other intellectual property laws and treaties. The SOFTWARE PORTION OF THE PRODUCT is licensed, not sold.  1. GRANT OF LICENSE. This EULA grants you the following rights: *Software.  You  may  install  and  use  one  copy  of  the  SOFTWARE PORTION OF THE PRODUCT on the COMPUTER. *Network Services. If the SOFTWARE PORTION OF THE PRODUCT includes functionality that enables the COMPUTER to act as a network server, any number of computers or workstations may access or otherwise utilize the basic network services of that server. The basic network services are more fully described in the printed materials accompanying the SOFTWARE PORTION OF THE PRODUCT. *Storage/Network Use. You may also store or install a copy of the computer SOFTWARE PORTION OF THE PRODUCT on the COMPUTER to allow your other computers to use the SOFTWARE PORTION OF THE PRODUCT over an internal network, and distribute the SOFTWARE PORTION OF THE PRODUCT to your other computers over an internal network.  1.1 General License Grant. RF IDeas grants to an individual, a personal, nonexclusive  license  to  make  and  use  copies  of  the  SOFTWARE PRODUCT for the sole purposes of designing, developing, and testing your software product(s) that are designed to operate in conjunction with any RF IDeas designed proximity reader product. You may install copies of the SOFTWARE PRODUCT on an unlimited number of computers provided that you are the only individual using the SOFTWARE PRODUCT. If you are an entity, RF IDeas grants the right to designate one individual within your organization to have the sole right to use the SOFTWARE PRODUCT in the manner provided above.  1.2 Documentation.  This  EULA  grants  an  individual,  a  personal, nonexclusive license to make and use an unlimited number of copies of any documentation, provided that such copies shall be used only for personal purposes and are not to be republished or distributed (either in hard copy or electronic form) beyond the user’s premises and with the following exception: you may use documentation identified in the SOFTWARE PRODUCT as the file format specification for RF IDeas’ proximity readers solely in connection with your development of software product(s) or an integrated work or product suite whose components include one or more general purpose software products.  1.3 Storage/Network Use. You may also store or install a copy of the SOFTWARE PRODUCT on a storage device, such as a network server, used only to install or run the SOFTWARE PRODUCT on computers used by a licensed end user in accordance with Section 1.1. A single license for the SOFTWARE PRODUCT may not be shared or used concurrently by other end users.  1.4 Sample Code. RF IDeas grants you the right to use and modify the source code version of those portions of the SOFTWARE PRODUCT identified as “Samples in the SOFTWARE PRODUCT (“Sample Code”) for the sole purposes to design, develop, and test your software product(s), and  to  reproduce  and  distribute  the  Sample  Code,  along  with  any modifications thereof, only in object code form.  2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS. *Limitations on Reverse Engineering, De-compilation and Disassembly. You may not reverse engineer, decompile, or disassemble the PRODUCT, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation *You may not reproduce or otherwise emulate, in whole or in part,  any  form  the  protocol(s)  defined  within this PRODUCT for use without a RF IDeas PRODUCT Redistributable Code. If you are authorized and choose to redistribute Sample Code (“Redistributables”)  as  described  in  Section  1.4,  you  agree  to:  (a) distribute the Redistributables in object code only in conjunction with and as a part of a software application product developed by you using the PRODUCT accompanying this EULA that adds significant and primary functionality to the SOFTWARE PRODUCT (“Licensed Product”); (b) not use RF IDeas’ name, logo, or trademarks to market the Licensed Product; (c) include a valid copyright notice on the Licensed Product; (d) indemnify, hold harmless, and defend RF IDeas from and against any claims or lawsuits, including attorney’s fees, that arise or result from the use or distribution of the Licensed Product; (e) otherwise comply with the terms of this EULA; and (f) agree that RF IDeas reserves all rights not expressly granted. You also agree not to permit further distribution of the Redistributables by your end users except: (1) you may permit further redistribution of the Redistributables by your distributors to your end- user customers if your distributors only distribute the Redistributables in conjunction with, and as part of, the Licensed Product and you and your distributors comply with all other terms of this EULA; and (2) in the manner described in Section 1.4.  *Separation  of Components.  The  PRODUCT is  licensed  as  a single product. Its component parts may not be separated for use on more than one computer.  *Single COMPUTER. The PRODUCT is licensed with the COMPUTER as a single integrated product. The PRODUCT may only be used with the COMPUTER.  *Rental. You may not rent or lease the PRODUCT without permission from RF IDeas.  *Software  Transfer.  You  may  permanently  transfer  all  of  your  rights under this EULA only as part of a sale or transfer of the COMPUTER, provided you retain no copies, you transfer all of the PRODUCT (including all component parts, the media and printed materials, any upgrades, this EULA  and,  if  applicable, the Certificate(s)  of  Authenticity), AND the recipient agrees to the terms of this EULA. If the PRODUCT is an upgrade, any transfer must include all prior versions of the PRODUCT.  *Termination.  Without  prejudice  to  any  other  rights,  RF  IDeas  may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE PORTION OF THE PRODUCT and all of its component parts.  3. UPGRADES. If the SOFTWARE PORTION OF THE PRODUCT is an upgrade from another product, whether from RF IDeas or another supplier, you may use or transfer the PRODUCT only in conjunction with that upgraded product, unless you destroy the upgraded product. If the SOFTWARE PORTION OF THE PRODUCT is an upgrade of a RF IDeas product, you now may use that upgraded product only in accordance with this EULA. If the SOFTWARE PORTION OF THE PRODUCT is an upgrade  of  a  component  of  a  package  of  software  programs  which  you licensed as a single product, the SOFTWARE PORTION OF THE PRODUCT  may  be  used  and  transferred only as  part  of that  single product package and may not be separated for use on more than one computer.  4. OEM COPYRIGHT. All title and copyrights in and to the PRODUCT (including but not limited  to images, photographs, animations, video, audio, music, text and “applets,” incorporated into the PRODUCT), the accompanying printed materials, and any copies of the SOFTWARE
6       PORTION OF THE PRODUCT, are owned by RF IDeas or its suppliers. The PRODUCT and SOFTWARE PORTION  OF THE PRODUCT is protected by copyright laws and international treaty provisions. You may not copy the printed materials accompanying the PRODUCT.  5. DUAL-MEDIA  SOFTWARE.  You  may  receive  the  SOFTWARE PORTION OF THE PRODUCT in more than one medium. Regardless of the type or size of medium you receive, you may use only one medium that is appropriate for your single computer. You may not use or install the other medium on another computer. You may not loan, rent, lease, or otherwise transfer the other medium to another user, except as part of the permanent transfer (as provided above) of the SOFTWARE PORTION OF THE PRODUCT.  6. OEM PRODUCT SUPPORT. Product support for the product is not provided by RF IDeas or its subsidiaries. For product support, please refer to the OEM supplies support number provided in the documentation. Should you have any questions concerning the EULA, or if you desire to contact OEM for any other reason, please refer to the address provided in the documentation provided.  FOR  THE  LIMITED  WARRANTIES  AND  SPECIAL  PROVISIONS PERTAINING TO YOUR PARTICULAR JURISDICTION, PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED WITH THE SOFTWARE PRODUCT PRINTED MATERIALS.  Limited  Warranty:  RF  IDeas  warrants  to  the  original  buyer  of  this product, that the hardware and  related  disk(s) are free of  defects in material and workmanship for a period of one year from date of purchase from  RF  IDeas  or  from  an  authorized  RF  IDeas  dealer.  Should  the   RF IDeas products fail to be in good working order at any time during the one-year period, RF IDeas will, at its option, repair or replace the product at no additional charge, provided that the product has not been abused, misused, repaired or modified. This warranty shall be limited to repair or replacement and in no event shall RF IDeas be liable for any loss of profit or any commercial or other damages, including but not limited to special, incidental, consequential or other similar claims. No dealer, distributor, company, or person has been authorized to change or add to the terms of this agreement, and RF IDeas will not be bound by any representation to the contrary. RF IDeas SPECIFICALLY DISCLAIMS ALL  OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF PURPOSE. Since some states do not allow such exclusion of  limitation  of  incidental  or  consequential  damages  for  consumer products, check the statute of the state in which your business resides.  This warranty gives you the specific legal rights in addition to any rights that you have under the laws of the state in which your business resides or operates.  Returns:  RF  IDeas  products  which  require Limited Warranty service during the warranty period shall be delivered to the nearest authorized dealer or sent directly to RF IDeas at the address below with proof of purchase and a Return Materials Authorization (RMA) Number provided by RF IDeas Technical Support Dept. Replacement parts or complete boards become the property of RF IDeas. If the returned board or unit is sent by mail, the purchaser agrees to pre-pay the shipping charges and insure the board or unit or assume the risk of loss or damage which may occur in transit. The purchaser is expected to employ a container equivalent to the original packaging. Copyright: Copyright by RF IDeas 2017. All rights reserved. Reproduction or distribution of this document in whole or in part or in any form is prohibited without express written permission from RF IDeas.  Trademarks: All RF IDeas products are trademarks of RF IDeas. All other product names or names are trademarks or registered trademarks of their respective holders.  Applicable Patents: RF IDeas pcProx Plus card readers supporting HID formats retain US Patent No. 5,952,935 and U.S. Patent No. 7,439,862.  Disclaimer: This Reference Guide is printed in the U.S.A. Any resemblance mentioned in the Reference Guide to persons living or dead, or to actual corporations or products is purely coincidental. RF IDeas believes that the information contained in this manual is correct. However, RF IDeas does not assume any responsibility for the accuracy of the content of this User Manual, nor for any patent infringements or other rights of third parties. RF IDeas reserves the right to make any modifications in either product or the manual without giving prior written notification.    FCC/ISED Compliance Statement  FCC ID: M9MLC758X (13.56MHz Card Reader)  “Pursuant  to  FCC  15.21  of  the  FCC  rules,  changes  not  expressly approved by RF IDeas might cause harmful interference and void the FCC authorization to operate this product.  Note: This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following  two  conditions:  (1)  This  device  may  not  cause  harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product complies with FCC OET Bulletin 65 radiation exposure limits set forth for an  uncontrolled environment.  The reader may not recognize value cards in the presence of high RF fields. If the current reading is erratic, the user shall take the following step:  Move the equipment  from  any  known  transmitters nearby. For more  information  contact  Tech  Support  at  (866)  439-4884  or TechSupport@RFIDeas.com. ISED French Compliance Statement   IC: 6571A-LC758X (13.56MHz Card Reader) "Conformément  à  la  FCC  15.21  de  la  réglementation  FCC,  les changements ne sont pas expressément approuvés par les idées RF peuvent causer des interférences nuisibles et annuler l'autorisation FCC d'utiliser ce produit.  Note: Cet appareil est conforme à la Partie 15 des règlements de la FCC et d'Industrie Canada exempts de licence standard RSS (s). Son fonctionnement  est  soumis  aux  deux  conditions  suivantes:  (1)  Ce dispositif ne doit pas causer d'interférences nuisibles, et (2) cet appareil doit  accepter  toute  interférence  reçue,  y  compris  les  interférences pouvant entraîner un fonctionnement indésirable. Ce produit est conforme aux normes FCC OET Bulletin 65 l'exposition aux rayonnements limites définies pour un environnement non contrôlé.  Le lecteur peut ne pas reconnaître des cartes de valeur, en présence de champs RF élevées. Si la valeur actuelle est erratique, l'utilisateur doit passer à l'étape suivante: Déplacer le matériel de toute émetteurs connus proximité. Pour plus d'informations  contactez  le  support  technique au 866.439.4884 or TechSupport@RFIDeas.com.       RF IDeas, Inc. 4020 Winnetka Avenue Rolling Meadows, IL 60008 www.RFIDeas.com  Toll Free: 866-439-4884 Voice: 847-870-1723 Fax: 847-483-1129  ® is a registered trademark of RF IDeas Inc. Trademarks not belonging to RF IDeas are property of their respective companies. ©2017 RF IDeas, Inc. All rights reserved. Products are subject to change without  notice.  99009230

Navigation menu