RF TECH RWT-0100 Wireless Charger & Power Bank User Manual
RFTECH Wireless Charger & Power Bank
RF TECH >
User Manual
2 3 5 64
Names of Parts
Directions for wireless charging 1
2
Place the receiving part of the smart phone for
wireless charging on the center of the wireless
charging area.
1
Connect power to wireless charge and Power Bank.
Product Configuration
<Charging Cable>
Power Bank indicator lamp
Reset /battery level check button
Wireless charging button
Wireless charging
indicator lamp
Wireless
charging area
Charger connector
connection port
USB connector
connection port
Charging Power Bank
The product has a built-in battery.
If you are using the product for the first time or after
not using for a long time, charge the battery fully
before using the product.
1
Turn on Power Bank.
2
When charging starts, the indicator lamp turns on
and displays the battery level. If charging does not
start, disconnect and then connect the charger.
3
When charging is completed, the 3 dots of the
indicator lamp turn on in blue. Disconnect the
charger and the product.
Charging a Smart Phone
Use the USB cable that comes with the product to
connect a Smart Phone with Power Bank as shown in the
following figure:
Use the provided USB cable for high-speed charging.
If you use the charger while the product is connected
to the mobile device, both devices can be charged,
but charging will take more time.
3
When smart phone charging is completed, remove
the smart phone from the wireless charging area.
If the battery charging speed gets slower if the wireless
charging function is used while the charger is being used.
USB charging stops while wireless charging is used.
The wireless charging indicator lamp shows the product
status. If the charger does not work or is not registering
power input, try disconnecting and reconnecting the
charger.
Charger status
Power connected
Not enough current
to charge
Green
Green flicker
Red → Green → Orange
→ flicker and then turn off
Indicator lamp status
Charger idle
Charging
Protection mode on Orange flicker
Off
The Charger uses magnetic induction technology. The
charger may not charge properly if the appliance is not
placed correctly or if a foreign object is lodged between the
appliance and the charging pad.
Use the product with a smartphone that supports wireless
charging or a smartphone equipped with wireless charger
(cover, patch)
Wireless charging devices : Galaxy S6, S6 edge, NOTE5
Check the charging icon on the screen of your mobile
appliance to make sure it is charging properly. The DMB
(Digital Multimedia Broadcasting) cannot be used while
charging wirelessly. Charging speed could be slower if
music or video is being played.
If a metal or thick protective phone cover is used, wireless
charging may not be possible.
Wireless Charge & Power Bank
(Product Warranty Enclosed)
<Wireless Charger & Power Bank>
Directions for wireless charging 2
1
Press the wireless charging button for two seconds
and ensure that the wireless charging lamp is on. Place
the smart phone on the charging area.
2
Place the charging part of the smart phone on the
center of the wireless charging area.
3
When charging is completed, take the smart phone
out from the wireless charging area and press the
Reset button briefly
If the wireless charging does not work due to low battery
level, connect the charger.
RFTech. Co., Ltd
<Product manual>
107811 12
Customer support
Product Special Features
The RFT Wireless Charger is WPC Qi-certified. It
is compatible with Qi-compliant mobile
appliances.
Check battery level
Charging Time
Charging method
Charger (5V/2A) Between 3 to 3.5 hours
Charging time
New Product (5,000mAh)
If you use a charger other than 5V/2A, charging may
not work.
The charging time and usage time of the product may
differ depending on the charging time and usage
environment.
If you use the USB cable to connect with a car audio
system, TV set-top box and other devices, charging
may not work.
If overcharged, the service life of the battery could
become shortened.
High-speed charging is only allowed when the battery
level is 5% or higher.
As the product may be discharged if it has not been
used for a long time, it should be charged before use.
If you use the charger while the product is connected
to the mobile device, both devices can be charged,
but charging will take more time.
Product Specifications
5.0V 2.0A / 9.0V 1.67A
Models
Power input
110KHz~205KHz
5.0V 2.0A
RWT-0100
Power outputa
Frequency range
5℃~35℃Operating temperature
size (mm) 153.5 x 74.6 x 1.4
Weight (g) 182.5g
Check battery level
66~100%
One dot on
Three dots on
Indicator lamp status
33~66%
5~33%
0~5% One dot flickering
Two dot on
#60, 1763-gil, Jukyangdae-ro,
Cheoin-gu, Yongin-si, Gyeonggi-do
Customer support center address
Customer support center phone number
1-469-401-1648
Customer support center website address
www.RFTECH.co.kr
9
Product Warranty
Product Warranty Certificate
Scope and subject of warranty
Product failure under regular and intended use within the
warranty period (1 year).
Where the regular and intended use of the product can only be
achieved through a change in parts or modification.
Exclusion from warranty
Where product failure is caused by a disassembly, modification,
remodeling, repair, and such arbitrarily actions undertaken by an
unapproved person.
Where product failure is caused by natural disaster or force
majeure condition (fire, flooding, lightening, and others).
Where product failure is caused by not following the prescribed
instructions or if it is caused by faults attributable to the user
(flooding, damage, accidents, and such).
Warranty coverage shall be 1 year from the date of purchase.
(Battery warranty coverage shall be 6 month from the date of purchase)
After purchase, please fill in the product warranty certificate below
and certify the date of purchase, also make sure to keep a valid
registered receipt.
In the case the date of purchase cannot be determined, it shall be
assumed that the date of purchase was 3 months after the product
manufacture date.
Product
Model
Date of purchase
Serial No.
Place of purchase
Warning
The following provides information to ensure user safety and to
prevent the loss of, or damage to property.
Please read these instructions carefully before use and use the
product appropriately.
RTF Co., Ltd. shall not liable for any personal injury or property
damage caused by a failure to follow these safety instructions.
A failure to follow the safety instructions can cause fire, electric
shock and damage and malfunction to this product. Please use
the product appropriately.
Do not disassemble or make modifications to the product.
Do not place any metallic items on the product. Do not place a
wireless charging cover by itself on the product.
Do not use a damaged power cord or plug, or loosened power
outlet.
Do not let children, babies or pets chew on the product.
Do not attempt to plug in or unplug the product with wet hands or
when the wireless charging pad is wet.
Do not drop the product or subject it to strong shocks.
Do not place heavy objects on top of the product.
Do not use or leave this product inside or near heating devices.
Keep the product in a dry place and avoid storing in wet and
humid places.
Do not use or leave the product in a dusty or dirty place.
Foreign material may cause the product to malfunction or cause
injury due to electric shock or fire.
If the product displays an odd odor, makes noises, or begins to
emit smoke, stop using the product immediately.
Use a certified adapter with a rated power of 5V/2.0A.
Do not use the product for any other purpose than its intended
purpose.
Use the product between 5℃and 35℃ and do not leave it at overly
high or low temperatures. It may become prone to combusting or
exploding.
(If you leave the product at a high temperature, e.g. in the car in
the summer, the product may suffer from transformed
appearance, internal damages or explosions.)
Caution : Any changes or modifications in construction of this
device which are not
expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment
Note : This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications, However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation be tween the equipment and receiver.
- Connect the equipment in to an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for
help.
This device complies with Part 15 of the FCC`s Rules. Operation is
subject to the following two Conditions:
1. This device may not cause harmful interference, and
2. This device must accept ant interference received, including
interference that may cause undesirable operation.
MEMO
12/2015 Rev.1.0