RF Technology E2-TRX500A UHF BASE STATION User Manual Eclipse2 Quick Start Guide

Download:
Mirror Download [FCC.gov]
Document ID	1871992
Application ID	YEPLfeKyJAaCV8WizZwSHg==
Document Description	Quick Start Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.64kB (320494 bits)
Date Submitted	2012-12-31 00:00:00
Date Available	2013-02-14 00:00:00
Creation Date	2011-07-25 13:23:28
Producing Software	GPL Ghostscript 8.64
Document Lastmod	2011-07-25 13:23:28
Document Title	Eclipse2 Quick Start Guide
Document Creator	PDFCreator Version 0.9.8
Document Author:	johnd

Getting Started with the Eclipse 2
1. Unpack your Eclipse 2. Compare the contents of the box with the packing list
and visually check that the unit is in good condition.
2. Install the IP Commander software on your computer. Do this by inserting the
CD, that came with your Eclipse 2, into your computer, and running the
program “IPCommander.exe”,
“IPCommander.exe” from the CD.
3. Connect the RF output of the Eclipse 2, the rear panel N-type
type connector,
connector to a
load.
4. Connect the RF input of the Eclipse 2,
2 the rear panel BNC connector, to a
source.
5. Connect the Ethernet port of the Eclipse 2, the rectangular socket on the rear
panel,, closest to the DB25 connector,
connector to the Ethernet port of your computer.
Use a standard Ethernet cable, cat 5 or higher, to make this connection.
connection
6. Set your computer to have a static IP address in the range 10.21.48.xx
10.21.48. and a
subnet mask of 255.255.255.0.
255.255.255.0
7. Turn on the power to the Eclipse 2.
8. Wait for the base station to boot. This will take approximately
approximately one minute.
minute At
the completion of booting the base station will say its IP address, through its
loudspeaker.
9. Start IP Commander, by double clicking on the IP Commander icon on your
computer’s desktop.
10. When the “Base Station Configuration” window appears, click the “Add”
“Add
button.
11. Enter the Admin Password, provided with your Eclipse 2, and the IP address of
the base station to be accessed, eg. “10.21.48.1”. Click the “OK” button.
12. Click on the IP address,
address then click the blue “Connect” button, at the bottom left
hand corner of the “Base Station Configuration” window.
13. You will now see the “Overview” panel of IP Commander.
14. Enter the desired receiver frequency, in MHz, into the “Rx Freq” field of IP
Commander.
15. Enter the desired transmitter frequency, in MHz, into the “Tx Freq” field of IP
Commander.
16. You should now be able to receive and transmit a signal, using the Eclipse 2.
When you do this, you will see the Eclipse 2’s signal path activate on the IP
Commander “Overview
Overview” panel.
17. You are now ready to follow
the detailed instructions in the IP Commander
Reference Manual, to customise your Eclipse 2, to suit your particular
circumstances.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : f97f63fa-b8c8-11e0-0000-5a5bd5e4e4f2
Producer                        : GPL Ghostscript 8.64
Keywords                        : ()
Modify Date                     : 2011:07:25 13:23:28+10:00
Create Date                     : 2011:07:25 13:23:28+10:00
Creator Tool                    : \376\377\000P\000D\000F\000C\000r\000e\000a\000t\000o\000r\000 \000V\000e\000r\000s\000i\000o\000n\000 \0000\000.\0009\000.\0008
Document ID                     : f97f63fa-b8c8-11e0-0000-5a5bd5e4e4f2
Format                          : application/pdf
Title                           : \376\377\000E\000c\000l\000i\000p\000s\000e\0002\000 \000Q\000u\000i\000c\000k\000 \000S\000t\000a\000r\000t\000 \000G\000u\000i\000d\000e
Creator                         : \376\377\000j\000o\000h\000n\000d
Description                     : ()
Author                          : johnd
Subject                         : 

EXIF Metadata provided by EXIF.tools