RFRemotech RF1M Receiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1662780
Application ID	fL1X0Wk1iKM/Ft6LgNL8XA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.08kB (150953 bits)
Date Submitted	2012-03-26 00:00:00
Date Available	2012-03-26 00:00:00
Creation Date	2012-03-23 17:22:20
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2012-03-23 17:22:41
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

User’s Instruction
FCC ID:YMURF1M
Cues can be activated one by one through pressing
buttons
RFRemotech Radio Frequency Remote Technology
Remote Control Products, Remote Controllable Service
Warning!!!
A. Only the person who has Fireworks licence is allowed to purchase the
product, or the person of whom there isn’t fireworks purchase limitation in
his/her country or district is allowed to purchase the product.
RFRemotech/E-MadeinCHN is not with responsibility for any illegal usage.
Descriptions
Mode: OOK Wireless Radio
Type: Learning Code
Frequency: 433MHz
Every receiver can learn one button of transmitters, Each button can activate
its corresponding receiver(s) instantly.
A. TCF Transmitter (FCC/CE
certified)
TCF100-12LN/TCF100-12LNX
Channel: 12CH
Power: 23A 12V battery
Transmitting Range:100m
With ON/OFF switch, prevent
the buttons from misoperation
B.Receiver
Model No.:
AlphaFire M: RF1M(FCC/CE certified)
Cue: 1 Cue
Power: 4x AAA battery
Firing current: >750mA, Max. 5000mA
Test current: <10mA
Sizes: 55x50.5x40mm, Antenna is retractile and can be
folded.
1-Antenna, retractile and can be folded.
2-Power/Low Power LED. Normally the LED is always
on as 3-Position Switch 4 is at FIRE or TEST. When
batteries are low, the LED blinks.
3-Test LED. When exterior circuit is coherent, the LED
is on; When exterior circuit is interrupted, the LED is off.
4-3-Position Switch, TEST-Test exterior circuit, OFF-Power is off,
FIRE-Receiver is armed to fire fireworks or learn code.
5-Label.
6-Label Location, mark receiver.
7-Learning Button. Only when 3-position switch is FIRE, LEARN button can
work.
8-Learning/Firing LED. See the following description Learn Code.
9-Fast Fastening Terminals.
10-Firing LED (see the above picture in Page 2)
Before Use
Put 4x AAA battery into battery enclosure.
Learn Code
Receiver must learn code of transmitter button, so that transmitter will
work with receiver together.
How to Learn Code: Shift 3-position switch to FIRE, keep depressing
LEARN button more than 3 seconds to have Learning/Firing LED on, and then
release LEARN button, press one of transmitter buttons within 3 seconds,
LED will blink once and then be off, learning code succeeds.
How to Clear Code: Shift 3-position switch to FIRE, press LEARN button
and don’t release the button for more than 6 seconds until Learning/Firing
LED blinks three times and then goes off, code is cleared.
Warning: Only when no fireworks is connected, you can Learn Code
or Clear Code!
How to Use
A. Test
To check if external circuit is coherent.
When exterior circuit is connected, Shift 3-position switch to TEST, if TEST
LED is on, it indicates the exterior circuit is coherent; If TEST LED is off, it
indicates the exterior circuit is interrupted.
B. Fire
When exterior circuit is tested coherent, shift 3-position switch to FIRE, press
transmitter button, Learning/Firing LED will blink once, firing current will be
sent out.
Please note, in FIRE status, receiver can be re-activated after 5
seconds.
Reference
Any number of receivers can be programmed to any of the buttons/channels,
so a button/channel can fire multiple e-matches simultaneously.
Some Recommendations
AlphaFire M12Q
1x TCF100-12LN/TCF100-12LNX
12x RF1M
Range 100m.
FCC, CE certified.
Manufacturer: RFRemotech
E-mail: service@RFRemotech.com
Http://www.RFRemotech.com
March, 2012
WARNING:
Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2012:03:23 17:22:20+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2012:03:23 17:22:41+08:00
Metadata Date                   : 2012:03:23 17:22:41+08:00
Format                          : application/pdf
Title                           : <4D6963726F736F667420576F7264202D205246314DD6B1BDD3B5E3BBF0CFB5CDB3D3C3BBA7CBB5C3F7CAE9>
Creator                         : Administrator
Document ID                     : uuid:2a037531-6ce3-4824-8def-d0f41170764d
Instance ID                     : uuid:e596fbf5-08a2-4fe7-a9d2-8cf483d76a87
Page Count                      : 5
Author                          : Administrator

EXIF Metadata provided by EXIF.tools