RFRemotech TCF200SP FSK 12CH Cased Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1431156
Application ID	ezcMizg0aCMmwigu88jL2A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.29kB (41091 bits)
Date Submitted	2011-03-14 00:00:00
Date Available	2011-03-14 00:00:00
Creation Date	2011-03-07 12:10:14
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2011-03-07 12:11:38
Document Title	Microsoft Word - Specification of the FSK 12CH Cased Transmitter.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	sony

User Manual
FSK 12CH Cased Transmitter
Model: TCF200SP
Brand: RFRemotech
The 12CH Cased Transmitter is 433MHz frequency with 200m transmitting range, can
be powered by either external or internal 12V power supply—external 23A12VDC battery,
internal 10-1.2V AAA rechargeable battery pack. Faceplate of the transmitter is with charger
port, the battery pack can be charged directly once the charger is connected. Both external &
internal power sauce are controlled by the Keyed on/off Switch, also there are two 3-way
Rocker Switches, one for power sauce selection and the other for encoding selection.
Detail Specification:
1. Operating Power Control.
The Keyed Switch controls the main supply power. When the Keyed Switch is locked
in Off Position, the circuit is disconnected; when the Keyed Switch is locked in On Position,
the circuit is connected.
2. Selection of Internal/External Power.
Internal/External Power is selected thru the 3-way Rocker Switch. When the Rocker
Switch is in Int. Bat Position, the circuit is powered by the internal power; when the Rocker
Switch is in Ext. Bat Position, the circuit is powered by the external power; when the Rocker
Switch is in Middle Position, the circuit is off without power.
3. Charging.
The transmitter comes with an external charger with LED for indicating the charging
status. The Charger is American Standard with INPUT: AC100-240V, 50/60Hz and
OUTPUT: DC13.8V/ 0.35A,
4. Lighting
The faceplate of the transmitter is with an USB port for LED light that is not controlled
by the Keyed Switch. LED light: 5V/0.5W.
5. Encoding
The transmitter can be coded by both the internal coding pads & the external Rocker
Switch 3-way Rocker Switch. The internal coding pads is constituted by 3-Positon (High,
low & Floating) encoding 8-way DIP switch; the external coding is used 3-way (High, low &
Floating) Rocker Switch- the first way is for High, the second is for Low and the third is for
connecting to one of the 1-8(A0-A7) encoding pads. The PCB is with 10pin wire terminal
blocks for the 3-way Rocker Switch, the order of 10pin terminal is high (5V), low (ground),
1-8 encoding address (A0-A7).
Note: In use, once the terminal block is connected to the external Rocker Switch, the
correspondent DIP Switch must be floating to avoid circuit shorted.
6. LED Indicator.
1) Charging LED lights in Green under charging.
2) Power/low-power LED (Power on in green, Low-power in Red)
3) Button pushed LED lights in Red under button pressed.
7. Buttons
12 buttons in 3 lines marked as letter A, B, C & D, then numeral 1-8.
Button A, B, C & D is for bank selection and button1-8 is for the cue output selection.
FCC ID: YMU-TCF200SP
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipments.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2011:03:07 12:11:38+08:00
Create Date                     : 2011:03:07 12:10:14+08:00
Metadata Date                   : 2011:03:07 12:11:38+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Specification of the FSK 12CH Cased Transmitter.doc
Creator                         : sony
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:267b24c1-bd31-4441-b81d-e250008abc3b
Instance ID                     : uuid:2c5542d2-9909-4abb-9993-801cbc86b6c5
Page Count                      : 3
Author                          : sony

EXIF Metadata provided by EXIF.tools