RG3 Meter ESP Wireless meter registration device User Manual ESP r1 2

Download:
Mirror Download [FCC.gov]
Document ID	1081054
Application ID	Bdk5z/6QOwVAwpgGwjcS7g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	100.55kB (1256832 bits)
Date Submitted	2009-03-16 00:00:00
Date Available	2009-03-16 00:00:00
Creation Date	2009-03-12 12:31:16
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2009-03-12 12:31:16
Document Title	Microsoft Word - ESP User Manual - r1.2.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	JPintok

User Manual
ESP AMR System
Introduction:
Thank you for purchasing the Infinity ESP AMR meter. This innovative meter
includes an electronic register designed to give you the information you demand
coupled with an easy to use AMR system that is integrated into the electronic
register. With no wires to connect and no radio setup procedure, Infinity has
taken the complexity out of AMR.
Installation:
The ESP AMR meter comes to you pre-set at the factory ready to install in the
field. Simply install in the service line with the directional arrow in-line with the
flow of water. The meter should be oriented so the antenna is vertical.
Operational Information:
The ESP AMR meter is designed to operate with Infinity’s stationary Data
Collector. The meter will transmit reading, tamper, and data logging information
to the Data Collector for billing and usage analysis purposes.
Maintenance:
Metering Element:
A rebuild kit can be purchased through Infinity Metering or your distributor to
allow you to replace the internal metering element to bring your meter up to like
new performance. If the meter is still within its warranty period, please contact
Infinity Metering or your distributor before attempting to repair the meter.
Meter Register:
There are no user maintainable components in the Infinity ESP AMR meter
register. Please contact the Infinity Metering or your distributor regarding
maintenance issues.
(Continued on Next Page)
FCC Information to the User:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment
Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Cet appareillage numérique de la classe B répond à toutes les exigences de l'interférence canadienne
causant des règlements d'équipement. L'opération est sujette aux deux conditions suivantes: (1) ce
dispositif peut ne pas causer l'interférence nocive, et (2) ce dispositif doit accepter n'importe quelle
interférence reçue, y compris l'interférence qui peut causer l'opération peu désirée.
Warning: Changes or modifications to this device not expressly approved by Infinity Metering could
void the user’s authority to operate the equipment.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator and your
body. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
The term “IC:” before the radio certification number only signifies that Industry Canada technical
specifications were met.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2009:03:12 12:31:16-04:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:03:12 12:31:16-04:00
Format                          : application/pdf
Creator                         : JPintok
Title                           : Microsoft Word - ESP User Manual - r1.2.doc
Document ID                     : uuid:eb93f3fe-287f-4301-b80c-a177b9faca5f
Instance ID                     : uuid:116542d4-2242-403c-b4d9-1217bc56c0e1
Page Count                      : 3
Author                          : JPintok

EXIF Metadata provided by EXIF.tools