RIDER BEST BT-2200BL Bluetooth speaker User Manual User muanal

Rider best,Inc Bluetooth speaker User muanal

Users Manual

Download: RIDER BEST BT-2200BL Bluetooth speaker User Manual User muanal
Mirror Download [FCC.gov]RIDER BEST BT-2200BL Bluetooth speaker User Manual User muanal
Document ID3109438
Application IDDI2V2v2Up51HSHKM5CaNTw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize7.15kB (89407 bits)
Date Submitted2016-08-23 00:00:00
Date Available2016-08-23 00:00:00
Creation Date2016-08-19 16:29:21
Producing SoftwareAcrobat Distiller 11.0 (Windows)
Document Lastmod2016-08-19 16:29:21
Document TitleMicrosoft Word - User muanal
Document CreatorPScript5.dll Version 5.2.2
Document Author: lenovo

User muanal
1,Short press : volume up. Long press : next song
2,Short press: boot up, play/pause. Long press: power off. When there is a call, short press to
answer/hang off the phone
3, Short press : voleme down. Long press: last song
4, Short press: LED dimmed. There are 5 LED light modes. Long press can change the LED light
mode
5,Short press :LED Brighten. Long press : power off
6,MODE button. Short press to change play mode
7, USB port, support MAX 32GB, compatible with WAV/FLAC/MP3 files. Work for iOs/Android
system, Max Output 5V 2A.
8,AUX port, 3.5mm standard earphone port, workable for mobiles/MP3/PC/Tablets ,When put
into LINE cable, the speaker will be in LINE mode after boot in. If you want to change mode,
please pull out the Line cable.
9,Micro 5P USB port, support card reader function when speaker connect to computer, download
the music into TF card. It can be used as USB sound card to play music from computer while
downloading.
10.TF card mode, support MAX 32G flash,Compatible with : WAV/FLAC/MP3 music files
11.LED indication
Blue: playing music
Red: Charging mode. Long bright when charging. When fully charged the LED will turn off.
12.Microphone input port, when receiving a call, the voice received by the microphone.
Reminder: When there is a warning sound when playing, it is power low,
please charge the speaker ( charging voltage: 5V, charging currency:do not lower than 1500mAh)
When playing music to automatically shut down, the bedlamp may not be light, please charge it
full when use again.
Bluetooth connection
1. Turn on the speaker. After switching to Bluetooth mode through the M key, bluetooth access to
automatically connected state
(the phone connected to the last shutdown when connected to the phone) at this time the blue
light flash;
2. Mobile / computer / other devices / open Bluetooth, and then click on the search, in the
search to the machine inside the choice of BT‐2210BL, waiting for about three to ten seconds of
time, (different brands, different regions of the system will be different)
3.Listen to music at the same time, if there is an incoming call, direct short press the switch
button can answer, this is a hands free speaker model, if not required, directly on the phone to
switch to answer interface mode switch to the receiver can be.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment. This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : lenovo
Create Date                     : 2016:08:19 16:29:21+08:00
Modify Date                     : 2016:08:19 16:29:21+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - User muanal
Creator                         : lenovo
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:6a36f7e0-ef0d-4811-8889-b7100be6255a
Instance ID                     : uuid:962a94af-c85a-4984-ab00-4f5f4d8ce8a1
Page Count                      : 3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AIXGBT-2200BL

Navigation menu