RIDER BEST SPE-RA1078 Bluetooth Speaker User Manual
RIDER BEST.INC Bluetooth Speaker Users Manual
User Manual
SPE-RA1078
Bluetooth Speaker
FM/AM/SW 3 BANDS RADIO
WITH BT & MEMORY CARD MUSIC PLAYER
273B TX
SPECIFICATIONS
Total Power Output: 1 Watt Frequency Response: FM 87~108 MHz
Power Input: 120V, 60Hz AM 530~1600 KHz
Speaker: 3 inches, 5 Watts, 8Ω SW 8.0~16 MHz
S/N Ratio: FM ≥ 45 dB Sensitivity: FM 15 dB±5 dB
AM ≥ 35 dB AM 85 dB±5 dB
SW ≥ 35 dB SW 15 dB±5 dB
RADIO INSTRUCTIONS
1. Place the antenna to the proper position for receiving signals.
2. Turn the Switch to choose FM/AM/SW Mode.
3. Turn the TUNING button to search the required channel.
BT INSTRUCTIONS
1.Turn the Switch to choose MP3 Mode.
2. Turn on the BT on your cell phone or others BT devices, then start to search a BT device named
"SPE-RA1078" and pair with it.
3. It will beep after the successful pairing, and you can enjoy the music by controlling the music player on
the radio or on your cell phone or others BT devices.
4.Turn off the BT on your cell phone or BT devices when you want to stop the music.
MEMORY CARD INSTRUCTIONS
1.Turn on the radio and make the volume at the proper level.
2.Insert the Memory Card and it will play the music automatically.
3.Use the music player to select the songs.
BATTERY INSTRUCTIONS
1.Please charge 12 hours the built-in rechargeable battery for the first time use.
2.In the BT/Memory Card Mode, the battery will last over 150 minutes.
In the Radio Mode, the battery will last over 300 minutes.
FCC caution
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between theequipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.