RM Acquisition 1000DA OverDryve 8Pro User Manual DES 2114 OD8Pro QSG 0103 010517 JS indd

Download:
Mirror Download [FCC.gov]
Document ID	3362101
Application ID	n/M5wP83lXpOL9ELy4srVA==
Document Description	A4C-1000DA_User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	286.83kB (3585403 bits)
Date Submitted	2017-04-18 00:00:00
Date Available	2017-09-30 00:00:00
Creation Date	2017-01-05 14:02:16
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-03-03 14:56:05
Document Title	DES-2114_OD8Pro_QSG_0103_010517_JS.indd
Document Creator	Adobe InDesign CC 2017 (Macintosh)

QUICK START GUIDE
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution!
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
This equipment should be installed and operated with a minimum distance of
0mm between the radiator and your body.
Cet équipement devrait être installé et actionné avec une distance minimum de
0mm entre le radiateur et votre corps.
FCC Radiation Exposure Statement
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This device complies with FCC SAR exposure limits set forth for an uncontrolled
environment.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps
qu'aucune autre antenne ou émetteur.
SAR compliance for using the equipment in close proximity to the human body
has been evaluated at 0mm.
The device for operation in the band 5150–5250 MHz is only for indoor use
to reduce the potential for harmful interference to co-channel mobile satellite
systems.
This equipment must not be co-located or operating in conjunction with any other
antenna or transmitter.
End-users and installers must be provide with antenna installation instructions and
consider removing the no-collocation statement.
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés
uniquement pour une utilisation à l’intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes
canaux.
Your OverDryve™ Pro Unit
Caution: Important Safety Information
Navigation
• Use this device at your own risk.
• Attend to this device only when it is safe to do so.
• Traffic laws and regulations always have priority over any
instructions from the navigation system.
NOTE: If you do not understand the spoken instructions or are unsure
of what to do, refer to the navigation map on your device.
Installation
• Make sure that the mount is securely mounted and properly
adjusted before each trip.
• Make sure that the mount does not impair the driver’s visibility.
• Do not attach the mount within the airbag deployment zone.
• Install the mount in a manner that minimizes risk in the event of
an accident.
• After installation, check all safety-related equipment to ensure that
it operates without interference from the device, its cables, or any
other accessories.
• Connect the wall charger to a 120V or 240V outlet only.
• Connect the vehicle charger to a 12V outlet only.
Device
• Do not use sharp-edged objects on the device touch screen.
• The device is not waterproof and is not protected against
water damage.
• Protect the device from extreme temperatures. Operating
temperature for the device is between 32 degrees F and
120 degrees F.
• Do not open the device casing.
• Do not attempt to replace the battery. Contact Rand McNally
Customer Support with questions about the battery.
• Always follow local regulations when disposing of this device.
NOTE: Make sure that there are no kinks in the cable and that it will
not be damaged by any sharp objects.
NOTE: Use only a moist cloth to clean the device.
NOTE: Do not pull the cable to unplug the unit.
OverDryve™ Pro Quick Start Guide
Your OverDryve™ Pro
Box Contents
• OverDryve™ Pro Unit
• Smart mount: Sirius XM®
• Bracket with suction cup
• Truck charger
• USB wall charger
• Dash mount disc
• FM transmitter antenna
• AUX cable
• Anti-glare screen protector
• Sirius XM® antenna
OverDryve™ Pro Quick Start Guide
Install the Mount
NOTE: Follow all local laws and regulations governing the placement of the mount.
1. Select an area with a line of sight to the sky and GPS satellites.
2. Clean and dry the mounting area.
3. Remove the suction cup protective film.
4. Attach the two pieces of the mount together and lock into place.
5. Adjust the angle of the mount.
6. Pull the suction cup lever up to release suction.
7. Plug the power cord into the mount and the vehicle's 12-volt power source.
8. Place and hold the mount suction cup against the
mounting surface.
9. Press the suction cup lever down until it snaps
into place.
10. Snap the tablet onto the mount.
11. Adjust the tablet so that it can be easily seen and
does not block the driver's line of sight.
OverDryve™ Pro Quick Start Guide
Your OverDryve™ Pro
OverDryve™ Pro
Power
OverDryve™ Pro Sirius XM®
Smart Mount
Home Volume
Down
Up
FM
Transmitter
Antenna
Sirius XM
Antenna
AV in
USB DC in AUX out
(power)
Micro SD
card
Micro HDMI
(video out)
Micro USB
(power)
AUX out
OverDryve™ Pro Quick Start Guide
Getting Started
1. Connect to the Internet.
Connect to the Wi-Fi hotspot on your smartphone or to your
home Wi-Fi network.
2. Register your device with Rand McNally for updates and support.
3. Connect to Bluetooth.
Enable Bluetooth on your smartphone and pair with
OverDryve™ Pro to use Bluetooth hands-free calling and
texting, voice assistant, and music streaming.
4. Connect to your truck stereo system.
To stream audio to your truck stereo system, the tablet must be in
truck mode. To put the tablet in truck mode, place it on the Smart
Mount and plug the mount into the power adapter. You can listen
to audio through any of the following four methods:
1. Plug an AUX cable into the Smart Mount and the AUX port in your truck.
NOTE: The AUX cable must be plugged into the Smart Mount, not OverDryve™ Pro.
2. Use the Smart Mount speaker.
3. Use the FM Transmitter. To use the FM transmitter, attach the antenna to the Smart Mount.
On OverDryve™, tap Entertainment > FM Transmitter.
4. Add an AUX input to your existing truck. Visit randmcnally.com/aux-install to learn more.
OverDryve™ Pro Quick Start Guide
OverDryve™ Pro Operating System Home Screen
OverDryve™ Pro Quick Start Guide
10
GPS indicator
Bluetooth indicator
Wi-Fi indicator
Battery power indicator
Current time
View installed apps
Swipe right to view additional home screens
Voice Assistant
Back
10
Home
11
View open apps
11
Features
Bluetooth® Hands-Free Calling & Texting
Connect to your phone so you can call and text safely,
hands-free. Incoming text messages display in large,
readable format. Your contacts and call history will
automatically download when you get in the car.
Navigation On-board
No need to use your phone's data plan when you need
maps & directions. OverDryve™ Pro is equipped with
high-accuracy GPS and Rand McNally’s award-winning
navigation.
Voice Assistant
Integrates with your phone's built-in voice assistant (Siri,
Google, etc.) so you can use the voice commands you're
already used to. Read and send text messages, place
hands-free calls, set reminders, and much more.
Dash Cam
The dash cam records video of the road ahead. Provide
documentation of an accident and capture video
mementos from the road.
Music Streaming
Stream music, podcasts, and audiobooks directly from
OverDryve™ Pro or your phone; or download and play
offline from OverDryve™ Pro. Still have a library of MP3
files? Load them onto OverDryve™ Pro using an SD card or
USB and take your music with you.
Connect to the Truck Stereo
All audio from OverDryve™ Pro can be played through
the stereo of any truck by connecting an AUX cable or
streaming to the FM Radio. OverDryve™ also includes a
powerful speaker in the Smart Mount. Want an AUX input
added to your car? Visit randmcnally.com/aux-install to
learn more.
OverDryve™ Pro OS
OverDryve™ Pro runs on a custom operating system,
OverDryve™ Pro OS, built on top of Android 5.1 (Lollipop)
– offering proprietary Rand McNally apps as well as the
customizability and familiarity of Android. Access third
party app stores where you can download thousands of
popular Android apps, games, and more.
Sirius XM®
Enjoy hundreds of stations and multiple genres of
commercial free satellite radio. No more switching staions
as you drive across the country.
OverDryve™ Pro Quick Start Guide
Restart Your OverDryve™ Pro
Rand McNally has designed OverDryve™ Pro for speed and reliability. However, from time to time, all Android
devices run into problems. If your unit becomes unresponsive for any reason, it’s always best to restart the unit
by turning it off and on again.
Restarting the Device
1. Restart the unit by holding down the power button for 3 seconds, or until you see the Power Off screen.
2. Press Power Off.
3. Once the unit has shut down, press and hold the power button for 2 to 4 seconds to turn it back on.
If the unit is unresponsive and you don’t see the power down button appear on the screen, hold down the
power button for 10 to 15 seconds and the device will turn off completely. Once the unit has shut down, press
and hold the power button for 2 to 4 seconds to turn it back on.
For additional help and FAQs, visit randmcnally.com/support.
OverDryve™ Pro Quick Start Guide
More Information
For more information
• Rand McNally Website
		randmcnally.com/overdryve
• Support
		randmcnally.com/support
• Accessories
		store.randmcnally.com
• Facebook
		facebook.com/randmcnally
10
VIP Customer Support
Call toll-free:
800-237-7270
E-mail:
support@randmcnally.com
Questions about using OverDryve™ Pro?
Our team is ready to help.
OverDryve™ Pro Quick Start Guide
Trademarks
OverDryve™ is a trademark of RM Acquisition, LLC, d/b/a Rand McNally.
Sirius XM® is a registered trademark of Sirius XM Holdings.
InfoGation is a registered trademark of InfoGation Corporation.
Local search information provided by CityGrid Media.
Weather data provided by myweather.com.
Fuel prices provided by OPIS.
Traffic information provided by INRIX, Inc.
© 2016 Rand McNally. © 2016 HERE. All rights reserved.
Rand McNally follows a continuous improvement process and reserves the right to
provide enhancements that may not be reflected in the pictures and specifications in
this manual.
The information contained herein may be changed at any time without prior
notification. Neither this manual nor any parts thereof may be reproduced for any
purpose whatsoever without the express written consent of Rand McNally, nor
may it be transmitted in any form either electronically or mechanically, including
photocopying and recording. All technical specifications, drawings, etc. are subject to
copyright law.
OverDryve™ Pro Quick Start Guide
11
Warnings, End-User License Agreement, and Warranty
Pay attention to road conditions and street signs, and obey all traffic and safety laws. Traffic laws and current traffic conditions must always be observed and take precedence over the instructions issued by the Rand McNally®
navigation system. The User should be aware of situations where current traffic conditions and the instructions from the navigation system may be in conflict. Some states prohibit the use of windshield mounts and may
otherwise restrict the usage of navigation and other electronic devices in the vehicle. It is the User’s responsibility to operate his/her vehicle in a safe manner and to ensure compliance with all laws and regulations. The use of
the navigation system does not relieve the User of his/her responsibilities. .
If after reading the following terms and conditions, the User decides not to accept the terms, the User should not use this navigation system.
Rand McNally hereby grants you (“User”) a single-user non-exclusive, non-transferable license to use the Rand McNally navigation system, including software incorporated and associated data incorporated therein and aa
related documentation that accompanies the product (hereinafter referred to as the “Product” ) for User’s own internal business or personal use and not for resale or sublicense .
This Product is furnished under license and may be used only in accordance with the terms and conditions of this license. Except as permitted by such license, the contents of this Product may not be disclosed to third parties,
copied or duplicated in any form, in whole or in part, without the prior written permission of Rand McNally. This Product contains proprietary and confidential information of Rand McNally and its licensors. Rand McNally grants
User a limited license for use of this Product for its normal operation. By using the Product, User acknowledges that the contents of the Product are the property of Rand McNally and its licensors and are protected by U.S.
copyright, trademark and patent laws and international treaties.
THE USER MAY NOT:
• Use the Product on a network or le server, time-sharing or to process data for other persons.
• Use the Product to create any routing tables, les, databases or other compendiums.
• Copy, loan or otherwise transfer or sublicense the Product, its software or content.
• Modify or adapt the Product in any way, or decompile, disassemble, reverse engineer or reduce to human readable form the software incorporated in the Product.
• Alter, remove or obscure any copyright notice, trademark notice, or proprietary legend from the Product.
This license will terminate automatically if User fails to comply with any of the terms of this license, and in such case, User agrees to immediately stop using the Product. Rand McNally may revise or update the Product at its sole
discretion, but it is not obligated to furnish any revisions or updates to User.
RM Acquisition, LLC d/b/a Rand McNally warrants that the Product, and the component parts thereof, will be free of defects in workmanship and materials for a period of one (1) year from the date of purchase. This warranty
may be enforced only by the first consumer purchaser (“Customer”), provided that the product is utilized within the U.S.A. or Canada.
During the warranty term, Rand McNally will, without charge, repair or replace (with a new or newly reconditioned unit), at its option, defective Products or component parts. For repair or replacement of defective Products,
Customer must contact Rand McNally at 1-800-333-0136 for return authorization and instructions. Customer will be required to provide proof of date of first Customer purchase by providing a copy of the original sales receipt
for the warranty to be valid. The Customer must pay any initial shipping charges required to ship the Product to Rand McNally for warranty service, but the return charges will be at Rand McNally’s expense, if the Product is
found to be defective and is repaired or replaced under the terms of this warranty.
If the Product sent in is still under its original warranty, then following repair or replacement by Rand McNally, the new warranty is 90 days or to the end of the original one (1) year warranty, whichever is longer. If the Product is
out of warranty, Rand McNally shall have no obligation to repair or replace the Product, but if it does choose to repair or replace the Product, such repair or replacement shall be at Rand McNally’s then-current cost. In such case,
customer shall be responsible for all shipping charges associated with the shipment of the Product to Rand McNally and its return to the customer.
This warranty gives the Customer specific rights. Other rights may be available to Customer which vary from state to state.
Exclusions: This limited warranty does not apply: 1) to any product damaged by accident; 2) in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs; 3) if the serial number has been
altered, defaced or removed; 4) if the Product is used other than as provided in the documentation that accompanies the Product, or 5) if the owner of the product resides outside of the U.S.A. or Canada.
12
OverDryve™ Pro Quick Start Guide
Warnings, End-User License Agreement, and Warranty
CAUTION: RAND MCNALLY MAKES NO WARRANTY AS TO THE ACCURACY OR COMPLETENESS OF THE INFORMATION IN THE PRODUCT, THE SOFTWARE OR THE DOCUMENTATION, AND DISCLAIMS
ANY AND ALL EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTY AS TO
QUALITY, PERFORMANCE, TITLE OR NON- INFRINGEMENT. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO SOME CONSUMERS.
IN NO EVENT WILL RAND MCNALLY OR ITS LICENSORS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IT IS THE USER’S RESPONSIBILITY TO USE THIS PRODUCT PRUDENTLY AND IN ACCORDANCE WITH THE DOCUMENTATION. THIS PRODUCT IS INTENDED TO BE USED ONLY AS A TRAVEL AID AND MUST NOT BE USED FOR ANY
PURPOSE REQUIRING PRECISE MEASUREMENT OF DIRECTION, DISTANCE, LOCATION OR TOPOGRAPHY.
The User agrees to allow information provided by the User to Rand McNally to be used for internal business evaluation purposes, including, but not limited to, evaluating the effectiveness of the Product and the services provided
and methods to simplify or improve User experiences. Such information will not be provided to third parties in any way that discloses the identity of the User.
Rand McNally may make use of third party software in the Product. Notwithstanding the terms and conditions of this license, use of some third party materials included in the Product may be subject to such third party’s terms
and conditions. The third party copyright notices are provided at the end of this License.
The User agrees to indemnify, defend and hold Rand McNally and its licensors (including their respective licensors, suppliers, assignees, subsidiaries, affiliated companies, and the respective of officers, directors, employees,
shareholders, agents and representatives of each of them) free and harmless from and against any liability, loss, injury (including injuries resulting in death), demand, action, cost, expense or claim of any kind or character,
including but not limited to attorney’s fees, arising out of or in connection with any use or possession by the User of this Product.
These terms and conditions constitute the entire agreement between Rand McNally (and its licensors and suppliers) and the User pertaining to the subject matter hereof, and supersedes in their entirety any and all written or
oral agreements previously existing between us with respect to such subject matter. The terms and conditions (including the license) may be updated from time to time with or without notice.
The above terms and conditions shall be governed by the laws of Illinois, without giving effect to (i) its conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is
explicitly excluded. The User agrees to submit to the jurisdiction of Illinois courts for any and all disputes, claims and actions arising from or in connection with the User’s license and use of the Product hereunder.
User shall not export the Product in violation of any U.S. or foreign laws. Rand McNally’s licensors shall be third party beneficiaries of Rand McNally’s rights under this license, but are not parties hereto and have no obligations
hereunder.
By using this Product you agree to be bound both by the foregoing and to any additional terms of use found at www.randmcnally.com.
Actual toll costs may vary from estimates depending upon a number of factors including inaccurate or imprecise source data and variable toll costs, which are dependent upon vehicle characteristics (class, axle number, weight,
etc.) that vary across toll roads.
Restricted Rights Legend. For governmental agencies: Use, reproduction or disclosure is subject to restrictions set forth in subparagraph (c) (1) (iii) of the Right in Technical Data and Computer Software clause at 		
DFARS 52.227-7013, as amended.
Rand McNally, TripMaker, the Rand McNally logo and the globe design mark are registered trademarks and OverDryve is a trademark of RM Acquisition, LLC, d/b/a Rand McNally.
Portions © 2016 HERE. All rights reserved. This data includes information taken with permission from Canadian authorities, including © Her Majesty the Queen in Right of Canada, © Queen’s Printer for Ontario. 		
© 2016 InfoGation. All rights reserved.
© 2016 Rand McNally. All rights reserved. U.S. Patent Nos. 7,580,791 and 8,214,141.
OverDryve™ Pro Quick Start Guide
13
Notes
14
OverDryve™ Pro Quick Start Guide
Notes
OverDryve™ Pro Quick Start Guide
15
Notes
16
OverDryve™ Pro Quick Start Guide
Support
randmcnally.com/support
800-237-7270
OVERDRYVEPRO_QSG_010517_v001

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Language                        : en-US
Page Count                      : 20
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29
Create Date                     : 2017:01:05 14:02:16-06:00
Metadata Date                   : 2017:01:05 14:02:49-06:00
Modify Date                     : 2017:03:03 14:56:05+08:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Instance ID                     : uuid:36833e03-8d14-d14a-9987-d3f76bc1f2e8
Original Document ID            : xmp.did:FE90787CB8206811871F9ADEFF643667
Document ID                     : xmp.id:2ceb0f7e-d00c-4676-a1bc-95fafaacb086
Rendition Class                 : proof:pdf
Version ID                      : 1
Derived From Instance ID        : xmp.iid:f2b5c1a7-07e8-4a9e-8e81-28651127d316
Derived From Document ID        : xmp.did:f2b5c1a7-07e8-4a9e-8e81-28651127d316
Derived From Original Document ID: xmp.did:FE90787CB8206811871F9ADEFF643667
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2017:01:05 14:02:16-06:00
Format                          : application/pdf
Title                           : DES-2114_OD8Pro_QSG_0103_010517_JS.indd
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Creator                         : Adobe InDesign CC 2017 (Macintosh)

EXIF Metadata provided by EXIF.tools