RM Acquisition 91005A ClearDryve User Manual 15 CD50 UserMan US

RM Acquisition LLC ClearDryve 15 CD50 UserMan US

UserManual.wiki >

RM Acquisition >

91005A User Manual HTML Version

15_CD50 UserMan-US

Support

www.randmcnally.com/support

800-333-0136

ClearDryveTM 50

Quick Start Guide

cleardryve50_011619_v001

ClearDryveTM 50

FCC ID:A4C91005A

Contents

What’s in the box ...................................................................................................................................................................2

ClearDryve™ Parts ..........................................................................................................................................3

Function Button Layout ..................................................................................................................................4

Getting Started with ClearDryve™ ..................................................................................................................... 6

Charge the Battery ........................................................................................................................................6

Power ClearDryve™ On and Off ...................................................................................................................... 7

Pair With a Device over Bluetooth® ................................................................................................................7

Call Mode .............................................................................................................................................................9

Quick Access .................................................................................................................................................9

Answer an Incoming Call .............................................................................................................................10

End a Call .................................................................................................................................................... 10

Ignore an Incoming Call ............................................................................................................................... 10

Redial the Last Number ................................................................................................................................ 11

Mute/Unmute a Call ....................................................................................................................................11

Turn the Volume Up and Down ...................................................................................................................12

Streaming Music ...............................................................................................................................................13

Quick Access ...............................................................................................................................................13

Play and Pause ............................................................................................................................................. 13

Turn the Volume Up and Down ...................................................................................................................14

Go to the Next/Previous Song ......................................................................................................................14

Connect to a Wired Device ..........................................................................................................................15

More Functions .................................................................................................................................................16

Add/Remove the Stereo Earpiece .................................................................................................................17

Reset to Factory Settings .............................................................................................................................. 18

Troubleshooting & FAQ .................................................................................................................................... 19

Help and Support .............................................................................................................................................. 20

Warnings, End-User License Agreement, and Warranty ................................................................................21

What’s in the Box ClearDryve™ Parts

In-box contents includes:

ClearDryve™ 50:

• ClearDryve™ headphones

• Audio cable

• Charging cable

• Drawstring pouch

• Detachable earpiece (comes

pre-assembled to the headphones)

• Detachable headpad

Microphone

Mic Boom Arm

Fixed Earpiece

Function Buttons

Head Band

Earpiece Release

Note: The earpiece release

button is located on the inside

of the headband. The detachable

headpad (shown separately),

is pre-assembled on the

ClearDryveTM 50.

Detachable Headpad

Detachable Earpiece

Dimensions: approx. 7.5" x 7.3" x 3.3"

The mic boom arm, ports, LEDs, and function buttons on the ClearDryve™ headphones are on the same

earpiece. You can use this earpiece on either ear. ClearDryve™ automatically adjusts for either side when

you extend the mic arm. To switch the earpiece with controls from one ear to the other, swivel the mic

boom up and over to the other side.

1. Vol + button

2. Vol – button

3. Micro-USB port

4. 3.5mm audio input

5. Multi-function button (MFB)

6. EQ preset button

7. Mic boom arm

You can press, long-press, and hold the buttons on ClearDryve™. Each does a different function:

1. Press: Press the button ﬁrmly and release it immediately.

2. Long-press: Press the button ﬁrmly, and keep it depressed for about a second.

3. Hold: Press and hold the button down for the amount of time listed.

Function Button Layout

Getting Started with ClearDryve™

To get started using ClearDryve™, ﬁrst you need to charge the battery. After you power it on, then you

can pair ClearDryve™ to your Bluetooth® - enabled phone, tablet or laptop. Once ClearDryve™ is paired,

you can immediately start taking and managing calls or listening to music.

Charge the Battery

Before use, you need to charge the battery on ClearDryve™.

Connect the USB cable to the micro-USB port on ClearDryve™.

Connect the other end to a charger.

If the battery level is low when you power on ClearDryve™,

you will hear a “Battery low” notiﬁcation.

Power ClearDryve™ On and Off

To turn ClearDryve™ on and off:

1. To power ClearDryve™ on, press the MFB.

2. You will hear “Power on.”

3. To power ClearDryve™ off, press and hold the MFB.

4. You will hear “Power off.”

When you power ClearDryve™ on for the ﬁrst time, it automatically enters pairing mode.

The next time you turn it on, it will automatically attempt to connect with the most

recently-paired device.

Pair with a Device over Bluetooth®

When you power ClearDryve™ on for the ﬁrst time, it automatically enters pairing mode.

In pairing mode, the LED indicator blinks red and blue, and you will hear “Pairing.”

Once a device is paired, the LED stays solid blue. ClearDryve™ will reconnect automatically when Bluetooth®

is enabled and the device is within range.

To pair ClearDryve™ with a BT device:

1. Power on ClearDryve™.

2. Enable Bluetooth® on your device.

3. ClearDryve™ will display on your device as ClearDryve™ 50. Select it.

4. The LED will change to solid blue.

You can pair ClearDryve™ to a new device at any time by entering pairing mode again.

To enter pairing mode again:

1. If the headphones is on, turn it off by pressing and holding the MFB.

2. Press and hold the MFB.

2. The LED indicator blinks blue and red, and you will hear “Pairing.”

As soon as it is paired with a device, ClearDryve™ is ready to make calls or stream music.

Note: When ClearDryve™ is turned on and not in pairing mode, it will automatically connect with the most recently paired device when it is on.

Call Mode

In Call Mode, you can answer incoming calls, and use your smartphone’s voice assistant to make

hands-free calls.

Quick Access

Answer a call Press the MFB.

End a call Press the MFB.

Ignore a call Press and hold the MFB.

Note: Holding down the MFB for too long (i.e., over 5 seconds) will cause

ClearDryve™ to power down.

Redial Double-press the MFB

Mute/Unmute Rotate the mic arm up (to mute) or down (to unmute)

Adjust volume Press Vol + or Vol -

10 11

Answer an Incoming Call

To answer an incoming call:

1. Press the MFB.

2. ClearDryve™ will

beep once to conﬁrm.

The call will be live

immediately.

Note: Make sure the mic boom arm is down.

End a Call

To end a call:

1. Press the MFB to hang up.

2. ClearDryve™ will beep once

to conﬁrm.

Ignore an Incoming Call

To ignore an incoming call:

1. Press and hold the MFB

for about 3 seconds.

2. ClearDryve™ will beep

once to conﬁrm.

Note: Holding down the MFB for too long

(i.e., over 5 seconds) will cause ClearDryveTM

to power down.

Redial the Last Number

To redial the last connected number:

1. Quickly press the MFB twice.

2. ClearDryve™ will beep once

to conﬁrm.

Mute/Unmute a Call

The moveable mic arm provides an easy

way to mute or unmute the mic when you

are on a call.

To mute the call:

1. Move the mic arm up and

away from your mouth, to

about 30 degrees or more

above horizontal.

2. ClearDryve™ will beep once

to conﬁrm.

To unmute the call:

1. Move the mic arm arm back

down in front of your mouth.

2. ClearDryve™ will beep once

to conﬁrm.

Note: You can use ClearDryve™ with the mic arm on either

ear. These steps work the same on both sides. To switch sides,

rotate the mic arm all the way around.

➡

Mute Unmute

Play/Pause Press the MFB

Adjust volume Press Vol + or Vol -

Next/Previous Long-press Vol + or Vol -

Streaming Music

Quick Access

Turn the Volume Up and Down

At any time, you can press the volume buttons to turn the volume of the call up or down.

There are 16 different volume levels available.

To change the volume:

1. Press Vol + to increase the volume.

2. Press Vol – to decrease the volume.

3. ClearDryve™ will beep when you

reach the lowest or highest

volume settings.

Note: Depending on your device, the volume buttons may behave differently. On some devices the ClearDryve™’ volume buttons may

control the device volume instead of ClearDryve™ volume.

Play and Pause

To play or pause music:

1. Press the MFB while in Music Mode.

2. ClearDryve™ will beep once

to conﬁrm.

Note: ClearDryve™ does not have a “Stop” function.

14 15

Turn the Volume Up and Down

At any time, you can press the volume buttons

to turn the volume of ClearDryve™ up or down.

There are 16 different volume settings

available.

To change the volume:

1. Press Vol + to increase the volume.

2. Press Vol – to decrease the

volume.

3. ClearDryve™ will beep when you

reach the lowest or the highest

volume.

Go to the Next/Previous Song

To switch to a different song:

1. Long-press Vol + to advance to

the next song.

2. Long-press Vol – to go back to

the beginning of the current song.

Long-press again to go to the

previous song.

3. ClearDryve™ will beep once

to conﬁrm.

Connect to a Wired Device

You can connect ClearDryve™ to any

standard 3.5mm audio aux jack.

1. Connect the included 3.5mm

audio cable to the audio in jack

on ClearDryve™.

2. Connect the cable to the aux out

on your music device.

Note: Depending on your device, the volume buttons may behave differently. On some devices the ClearDryve™ volume buttons control the

device volume instead of ClearDryve™ volume.

Note: You must use the included aux cable to connect your device to ClearDryve™. When using ClearDryve™ in wired mode, Bluetooth®

functions including volume control on the headphones will not work.

16 17

Add/Remove the Detachable

Stereo Earpiece

ClearDryve™ can convert from mono

(one earpiece plus headpad) to stereo

(two earpieces). The detachable earpiece

can be replaced with the headpad for

mono conﬁguration.

To remove the earpiece or the headpad:

1. Hold the black earpiece

release tab.

2. Slide the earpiece off.

To attach the earpiece or the headpad:

3. Slide the earpiece/headpad onto

the ClearDryve™ head band.

4. The earpiece will click when

connected.

More Functions

EQ preset

Your ClearDryve allows you to pick from 5 preset equalizer (EQ) settings. This allows you to pick the

ideal settings for the speciﬁc type of music you are listening to. When you ﬁrst turn on power to your

ClearDryve, the ﬁrst equalizer setting (EQ1) is active by default. Pressing the EQ button will result in EQ

2 becoming the active preset. Keep tapping on the EQ button to toggle through the presets till you ﬁnd

one that delivers the best sound quality.

➡

18 19

Troubleshooting & FAQ

Issue: Possible Causes:

Can I connect more than one

device to my headphones.

Yes, your headphones can be simultaneously connected to more

than one device. To add new connections after connecting to the ﬁrst

device, turn off the headphones, then press and hold the MFB. The

headphones will enter pairing mode. Follow the steps for your unique

device (smartphone, laptop, tablet) to connect to the headphones.

I am conﬁdent batteries are

fully charged, yet they do

not seem to work.

In the rare event that your headphones “locks up,” it can be

“rebooted” by pressing and holding the MFB and Vol+ button

simultaneously. The headphones will then turn off. Press the MFB

to turn on and resume operation.

Reset to Factory Settings

You may need to restore ClearDryve™ back to its factory state, typically when switching over to newer

model smartphones / laptops for daily use. Clearing the “pairing history” on your headphones can help

improve connection times between your headphones and new devices.

To reset ClearDryve™:

1. Make sure ClearDryve™ is powered off. Now press and hold MFB to place

it in pairing mode.

2. Press and hold Vol - and MFB at the same time until you hear 2 beeps.

Your ClearDryve’s pairing history is now cleared and it is in pairing mode. You can turn off the

headphones or proceed to pair it with your device(s).

Note: The next time you turn on the device, it will automatically be in pairing mode.

20 21

Warnings, End-User License Agreement, and Warranty

WARNING: Safe Driving Practices

Never attend to or handle the headphones while driving. Always use your best judgment and exercise common sense when the vehicle is in motion and do not allow

yourself to be distracted by the headphones while driving. Pull over in a safe and legal manner before attempting to attend to or handle the headphones.

End-User License Agreement

Rand McNally hereby grants you (“User”) a single-user non-exclusive, non-transferable license to use the software and associated data incorporated in the headphones

and related documentation (collectively referred to herein as the “Software Materials”) for User’s own business or personal use and not for resale, sublicense or commercial

use. The Software Materials are furnished under license and may be used only in accordance with this license. Except as permitted by such license, the Software Materials

may not be disclosed to any third party, copied or duplicated in any form, in whole or in part, without the prior written permission of Rand McNally. The Software Materials

contain proprietary and conﬁdential information of Rand McNally and its licensors. Rand McNally grants User a limited license for use of this product and the Software

Materials for its normal operation. By using the Software Materials, User acknowledges that such Software Materials are the property of Rand McNally and its licensors and

are protected by U.S. copyright, trademark and patent laws and international treaties.

THE USER MAY NOT:

• Use the Software Materials on a network or ﬁle server, for time-sharing or to process data for third parties.

• Copy, loan or otherwise transfer or sublicense the Software Materials or any of its content.

• Modify, adapt, decompile, disassemble, reverse engineer or reduce to human readable form the Software Materials for any purpose whatsoever.

• Alter, remove or obscure any copyright notice, trademark notice, or proprietary legend from the product, the Software Materials or its content.

This license will terminate automatically if User fails to comply with any of the terms of this license and, in such case, User agrees to immediately stop using the Software

Materials. Rand McNally may revise or update the product or Software Materials, but is not obligated to furnish any revisions or updates to User.

Help and Support

Contact Rand McNally customer support for assistance:

• By phone: 1-877-446-4863

• By email: tndsupport@randmcnally.com

• On the web: http://www.randmcnally.com/support/category/cleardryve

22 23

Warranty

Rand McNally warrants that the product and the component parts thereof, will be free of defects in workmanship and materials for a period of one (1) year from the date of

purchase. This warranty may be enforced by the ﬁrst consumer purchaser (“Customer”) only, provided that the product is utilized within the U.S.A. or Canada. During the

warranty period, Rand McNally will, without charge, repair or replace (with a new or newly reconditioned unit), at its option, a defective product or component part. For

repair or replacement of a defective product, Customer must contact Rand McNally at 877-446-4863 for return authorization and instructions. Customer will be required

to provide proof of date of ﬁrst Customer purchase, such as a duplicate copy of the original sales receipt, for the warranty to be valid. The Customer must pay any initial

shipping charges required to ship the product for warranty service, but if the product is under warranty, the return charges will be at Rand McNally’s expense. Repairs or

replacements have a 90-day warranty. If the product is still under its original warranty, then the new warranty is 90 days or to the end of the original one (1) year warranty,

whichever is longer. This warranty gives the Customer speciﬁc rights. Other rights may be available to Customer, which vary from state to state.

Exclusions: This limited warranty does not apply: 1) to any product damaged by accident; 2) in the event of misuse or abuse of the product or as a result of unauthorized

alterations or repairs; 3) if the serial number has been altered, defaced or removed; or 4) if the owner of the product resides outside of the U.S.A. or Canada.

RAND MCNALLY AND ITS LICENSORS DO NOT MAKE ANY OTHER WARRANTY OR REPRESENTATION, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT,

INCLUDING ANY WARRANTY AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUALITY, PERFORMANCE, TITLE OR NON- INFRINGEMENT. IN NO EVENT

WILL RAND MCNALLY OR ITS LICENSORS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR

INABILITY TO USE THE PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow limitations on how long an implied warranty lasts

and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to some consumers.

Rand McNally.

Notes:

_______________________________________________________________________________

Federal Communication Commission (FCC) Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement, The device can be used in

portable exposure condition without restriction Federal Communication Commission (FCC) Radiation

Exposure Statement Power is so low that no RF exposure calculation is needed.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications or changes to this equipment. Such modifications or changes could void the user’s

authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

‐ Reorient or relocate the receiving antenna.

‐ Increase the separation between the equipment and receiver.

‐Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

‐Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate this equipment.

RM Acquisition 91005A ClearDryve User Manual 15 CD50 UserMan US

RM Acquisition LLC ClearDryve 15 CD50 UserMan US

15_CD50 UserMan-US

Navigation menu

Namespaces

Views

Navigation