ROMAN TECHNOLOGY R6290 Bluetooth Headset User Manual jpg

SHENZHEN ROMAN TECHNOLOGY CO.,LTD. Bluetooth Headset jpg

user manual

The Bluetooth Headset allows you freedom to make andreceive calls while on the move or in the office you can connectthe headset to a compatible phone that supports Bluetooth wire-less technology.Read this user guide carefully before using the headset.Readalso the user guide for your phone.which provides important sa-fety and maintenance information.Keep the headset and it’s a-ccessories out of reach of small children. Bluetooth wireless technologyBluetooth wireless technology allows you to connect compatiblecommunication devices without cables.A bluetooth connection does not require the phone and the headset be in line ofsight,but both devices should be within 10 meters(30 feet) ofeach other.Connections can be subject to interference from ob-structions,such as walls,or other electronic devices.The headset is compliant with the Bluetooth Specification 2.0+EDR supporting the following profiles.Headset Profile1.1 andHands -Free profile 1.5 Check with the manufacturers of otherdevices to determine ther compatibility with this device.There may be restrictions on using Bluetooth technology in somelocations.Check with your local authorities or service provider. 1.IntrouductionBefore you can start using the headset.you must charge thebattery and pair the headset with a compatible phone. Note:Pats of the headset are magnetic,Metallic mater -ials may be attracted to the headset,Do not place cr -edit cards or other magnetic storage media near the headset,because information stored on them may be erased. OverviewBluetooth HeadsetThe headset contains the following parts:（1）Indicater light（2）ON/OFF/Answer/End key（3）Charger connector (4) Microphone (5) Earloop 2.Get started Chargers and batteriesCheck the model number of any charger before using it with thisdevice. Warning:Use only batteries and chargers approved for use with this particular enhancement.The use of any other types may invalidate any approval or warranty and may be dangerous,For availability of approved please check with yourdealer When you disconnect the power cord of any enhancement.grasp and pull the plug, not the cord. Charg the batteryThis device has an internal.nonremovable. rechargeable battery.Do not attempt to remove the battery from the device as youmay damage the device.1.Connect the charger cable to the headset.2.Connect the charger to a wall outlet The redindicator light is on during charging If chargingdoes not start,disconnect the charging If chargingdoes not start,disconnect the charger,plugit in again ,and retry.Charging the batteryfully may take up to 2 hours.Bluetooth Headset User’s Guide1233．When the battery is fully charged,the red indicator light turns off And the blue indicater light turn on Disconnect the charger from the wall outlet and the headset The fully charged battery has power for up to 3 hour-6 hours 30 minutes of talk-time or up to 100 hours-180 hours of stand-by time.However,the talk and standby times may vary with dif-ferent mobile phones,products that use a Bluetooth connection,usage settings,styles.and environments. Switch the headset on or offTo MFB switch on,press and hold the power key,The headset beeps,and the red indicator light is displayed.When the headset is connected to a paired phone and is ready for use,the blue indicatorlingt flashes slowly.To switch off,press and hold the power key.The headset beeps,And the blue indicator light is flashing twice. Pair the headset with a compatible phone1.Swith on your phone and the headset.2.Activate the Bluetooth feature on the phone,and set the phone to search for Bluetooth devices.See the user guide of your phone for instructions.3.Select the headset from the list of found devices4.Enter the passcode 0000 to pair and connect the headset to your phone.in some phones you may need to make the conn ection separately after pairing See the user guide of your phone for details. You only need to pair the headset.with your phone once.5.if the pairing is successful.the headset beeps and appears in the phone menu where you can view the currently paired Blu -etooth devices. Disconnect the headset from the phone To disconnect the headset from your phone (for example.to conn -ect the phone to another Bluetooth device).do one of the follo -wing: Switch off the headset. Disconnect the headset in the Bluetooth menu of your phone. Move the headset more than 10 metters (30 feet)away from the phone.You do not need to delete the pairing with the headset to disco-nnect itReconnect the paired headset to your phoneTo connect the headset to you phone.switch on the headset makethe connection in the Bluetooth menu of you phone.or press andhold the answer end keyYou can set your phone to connect with the headset automaticallywhen the headset is switched on change your paired device setting-s in the Bluetooth menu. TroubleshootingIf you cannot connect the headset to your phone,do as follows: Ensure that the headset is charged,switched on,and paired with and connected to your phone. Ensure that the Bluetooth feature is activated on your phone. Check that the headset is within 10 metters (30 feet)of your phone and that there are no obstructions between the head -set and the phone.such as walls or other electronic devices. 5press the MFB switch key till the blue light is displayed fora long time,and release MFB key,then continue to pressit for about 3 seconds.Relaese the MFB key again, whenthe red and blue lights flash fast at the same timeto realize the reset function.64
FCC ID: YGKR6290 IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu