ROMAN TECHNOLOGY R6360 Bluetooth Mono Headset User Manual 6360Manual

Download:
Mirror Download [FCC.gov]
Document ID	1648821
Application ID	jeIst1xpEtVhQZIWMTfurA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.85kB (98141 bits)
Date Submitted	2012-03-05 00:00:00
Date Available	2012-03-05 00:00:00
Creation Date	2012-03-02 11:58:12
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2012-03-05 14:46:43
Document Title	Microsoft Word - 6360Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

Bluetooth Mono Headset
User’s Manual
Model ： R6360 R5 R505 R510 R515
R520 R525 R535 R550 R565 R560
R570
FCC ID:YGKR6360
Charging the battery
Bluetooth has an internal, no removable, Li-Polymer rechargeable
batter y. Do not attempt to remove the batter y from the device as you
may damage the device. Please do not use the device while being charged.
1. For first time use, please fully charge the headset.
2. Connect the charger to a wall outlet and connects the charger cable to
the charger socket.
3. While the charger is connected, the red indicator light is displayed
during charging. Charging the batter y fully may take up to 1 hour.
4. When the batter y is fully charged, the red indicator light turns off
and the blue indicators will solid light, please disconnect the
charger from the headset and the wall outlet.
5. The fully charged batter y can keep the power up to 4 hours of talktime. When the headset is powered on and batter y power is low, the
headset will emits reminder tones every 20 seconds in the earphone,
and the indicator light will turn red.
Batter y information
1. Your device is powered by a Li-Polymer chargeable batter y. The full
performance of a new batter y is an achieved only after two or three
complete charge and discharge cycles. The battery can be charged and
discharged hundreds of times, but it will eventually wear out.
2. Unplug the charger from the electrical plug and the device when
not in use. Do not leave a fully charged batter y connected to a charger,
since overcharging may shorten its lifetime. If left unused, a fully
charged batter y will lose its charge over time.
I t is recommended that you fully charge the headset before leaving it
unused for a long time. To prevent over discharge endangers the batter
y, you are recommended to fully charge the headset ever y 2 months.
Basic Operation
Before you use the headset for the first time, you must pair it with your
®
®
Bluetooth mobile phone or other Bluetooth devices ( The “Device”).
In this user guide, we take mobile phone as the pairing object for
example. Please pair according to the following steps:
1)Place the headset and the device within 1 meter distance area.
2)Ensure the headset is off, then press Multi-function Button for 5
seconds until the blue and red light flash alternately ; the headset is on
pairing mode now.
®
3) Activate your mobile's Bluetooth functions by referring to your
mobile user guide
for details. Make the mobile to search for the Bluetooth ® device.
4) Your mobile phone will find the headset and show it on the list.
5) Select the name, after press “OK” to confirm, input the password
“0000” to
finish pairing.
6) When the headset is paired with mobile phone, you will hear a beep
and the blue
indicator light will flash 5 times quickly, and then enter the standby
state.
7 )When the headset is in the pairing mode, if you didn’t finish the pairing
process within 2 minute, the headset will enter the standby state. If you
want to pair again, you need to repeat the steps 1)-6).
®
8) If your master device is compliant to Bluetooth v2.1 specification, the
headset may not ask password.
9) The headset supports multi-point technology, if you want to connect the
headset to the second Bluetooth- enabled mobile, please repeat the
pairing operation steps above. When complete pairing, turn off the
headset and then turn on again, the headset will connect to both 2 mobiles
automatically.
Wearing your headset
1. The headset is provided with an ear hook that you can use for a
better fit on your ear.
2.To use the headset without the ear hook, plug the headset into you
ear and point the headset toward your mouth.
3. To use the headset with the ear hook, insert the ear hook into the
small opening at the back of the headset.
4. The headset can be worn on either the left or right ear by change
the direction of the ear hook.
Turning headset on /off
Turning on the headset
When the headset is turned off, press and hold the MFB for about 2s, the
headset will emit 2 beeps, and the blue indicator will flash at the same
time, the headset is now on.
®
Connecting to a Bluetooth - enabled mobile phone
If the headset has completed the pairing operation successfully, when
the headset
turns on, it will connect to the phone(s) you last connected
automatically. Please
ensure your phone(s)'s Bluetooth ® function is activated.
Turning off the headset
At any working state after the headset is powered on, press and hold
MFB for about
4s, the headset will emit 2 beeps, and the red indicator will flash at the
same time, the
headset is powered off now.
Important:
When the headset has connected to 2 mobiles phones, it should be
distinguished
the connection sequence for some operations. As our definition, the
phone first
connected to headset is phone 1, the second one is phone 2.
If the headset is out of range, it will automatically try to reconnect the
device for
5 times.
To conserve power, if the headset is not connected to a device in 1hour,
the
headset will turn off automatically.
Head-free function
Making a call-Using phone's keypad
In the stand-by mode, you can dial the number on your phone(s)'s
keypad to make a call.
Use Voice -Dialing
In the stand-by mode, press MFB briefly, you will hear a short tone
from the headset, and the phone will prompt you say the voice tag
which you have already attached to your contact. If the voice tag is
identified by the phone, the related number will be dialed. Please insure
that your mobile phone supports this voice dialing function ,and voice
tags have been set up on your mobile phone prior to attempting this.
Please refer to your mobile phone's user guide or contact your ser vice
provider.
Important:
In a state of multi- connection is existed, the voice - dialing function is
only available for phone 1.
Last number re - dialing
In the stand-by mode, double press MFB the last number you dialed
will be re - dialed.
Important:
In a state of multi- connection is existed, the last number re - dialing
function is only available for phone 1.
Answering a call
When you receive an incoming call, press the MFB shortly to answer
the incoming call. You can also answer an incoming call directly from
your phone's keypad.
Ending a call
When a call is in progress, press the MFB shortly. This will end the
call. You can also end a call on your mobile phone(s) keypad.
Reject an incoming call
When you receive an incoming call, double press MFB to rejec t the
incoming call.
Troubleshooting
If you can not connect the headset to the mobile phone, please tr y the following
steps:
1)Ensure the headset is charged fully and it is paired with your mobile phone.
®
2)Ensure the headset is not connected with other Bluetooth device.
3)Ensure your mobiles Bluetooth ® feature is activated.
4)Ensure the headset is within a maximum of 10 meters of your mobile and
there is no obstruction, such as walls or other electronic devices in
between.
LED Indication
Headset status
LED Indication
Switch on
The purple indicator turns on and keeps on
for 3 seconds
Paring state
The red and
alternatively
blue
indicator
flashes
In idle state after
paired
The blue indicator flashes 1 time every 5
seconds
Incoming call
The purple indicator flashes
During call
The blue indicator flashes once every 8
seconds
Switch off
The red indicator flashes 3 times
Low battery
The red Led flashes
Charging
The red indicator keeps on
Charging finished
The blue indicator on
SPECIFICATION
Mono Bluetooth Headset
Bluetooth Version: V2.1+EDR
Mode:
Hands Free/Headset
Frequency: 2.4GHz
Transmit Power: Class 2
Range:
10M
Power:
AC Input 110-240V, DC Output 5V
Talking Time: 8H about
Standby Time: 160H about
Rechargeable 80mAh Li-Polymer Battery
*Operating Temperature: -10 ℃～50℃
*Storage Temperature: -20 ℃～60℃
Battery information
Your device is powered by a rechargeable battery. The full performance of a
new battery is achieved only after two or three complete charge and discharge
cycles. The battery can be charged and discharged hundreds of times, but it
will eventually wear out.
Unplug the charger from the electrical plug and the device when not in use. Do
not leave a fully charged battery connected to a charger, since overcharging
may shorten its lifetime. If left unused, a fully charged battery will lose its
charge over time.
Leaving the device in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always
try to keep the battery between 15℃ and 25℃(59℉ and 77℉). A device with
a hot or cold battery may not work temporarily, even when the battery is fully
charged. Battery performance is particularly limited in temperatures well
below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
Care and maintenance
· Keep all accessories and enhancements out of the reach of small children.
· Keep the device dry. Precipitation, humidity, and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, allow it to dry completely.
· Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
· Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
· Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic circuit
boards.
· Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
· Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
· Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
All of the above suggestions apply equally to your device, battery, charger, or
any enhancement. If any device is not working properly, take it to the nearest
authorized service facility.
IMPORTANT REGULATORY INFORMATION
This device complies with Part 15 of the FCC Rules: Operation is subject to the following
conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference that is received, including any
interference that may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2012:03:02 11:58:12+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2012:03:05 14:46:43+08:00
Metadata Date                   : 2012:03:05 14:46:43+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 6360Manual
Creator                         : Administrator
Document ID                     : uuid:384ccd4a-7475-4b78-ac70-04651ffac44c
Instance ID                     : uuid:eb0de41d-842e-4fdb-859a-4ad9c7ae5fcb
Page Count                      : 17
Author                          : Administrator

EXIF Metadata provided by EXIF.tools