ROMAN TECHNOLOGY STBT13 Bluetooth Earbuds User Manual

SHENZHEN ROMAN TECHNOLOGY CO.,LTD. Bluetooth Earbuds

user manual

Download: ROMAN TECHNOLOGY STBT13 Bluetooth Earbuds User Manual
Mirror Download [FCC.gov]ROMAN TECHNOLOGY STBT13 Bluetooth Earbuds User Manual
Document ID3314318
Application IDlsjeFwM4gPzVgmNmz2/SJQ==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize325.97kB (4074575 bits)
Date Submitted2017-03-13 00:00:00
Date Available2017-03-13 00:00:00
Creation Date2017-03-09 10:06:35
Producing SoftwareAdobe Acrobat 7.0 Image Conversion Plug-in
Document Lastmod2017-03-09 10:06:44
Document Titleuser manual
Document CreatorAdobe Acrobat 7.0

STBT13 User Manual
Wireless Earbuds
User Guide
STBT13
rcc ID: VGKsTBTu
In Box
Micro USB
Charging Cable
wireless
Earbuds
FRONT
NOTE: For easy pairing with your mobile device,
Make sure that both earbuds are fully charged.
1. Press and hold the Multi Function Button on both
earbuds for approximately 6 seconds. A tone is
heard, indicating that the earbuds are in pairing
mode. The LED indicators on both earbuds will
quickly flash RED and BLUE.
BEER)
Multi-Function
Button
2. Open the Bluetooth Settings menu on your mobile
device.
3. Locate the earbud's model (STBT13) from the
list of discovered devices.
4. Press the earbud’s model number (STBT13) to pair
your speaker to your mobile device.
5. Another tone is heard, indicating that both devices
have successfully paired.
On an iOS or Android Device
- GO to SETTINGS > BLUETOOTH
(Make sure Bluetooth is turned ON)
harg ng the rbuds
1. Insert the micro USB charging cable into the
micro USB charging port on the earbuds.
2. Insert the larger end of the micro USB charging
cable to an available USB port on your computer
or AC Adaptor (not included).
3,The LED indicator remains RED when the earbuds
are charging and will turn BLUE when they are
fully charged.
4.When the earbuds have fully charged, carefully
remove the micro USB charging cables from the
earbuds.
Micro USB
Computer , ..
NOTE: A low battery alert will annouce that the
earbuds must be charged.The LED indicator
will flash red and a voice prompt " Low battery.
Please charge"is heard.
l Charging Port
/' .e \
t'Al4ss ,
e aiunasin Q a
c an... .iaua. ()
n sinris
\ O
If a previously paired device is in range when the
earbud: are turned on, the headset will connect
to it automatically.
BACK
roubles ootln
Problem
“new,“ Cause Solullon
’ Usethe onaroerioiully
charge the battery
Location of controls: imam, (a salon, lite is depleted
none. on
353;:ng :gyvmmw tang mine invite...” aura
Left earbud ’
. tznaiging TM mama came I: not Remnnen rrra margng cabin ia the
Right earbud Iuncllun island Amparlycnnmed chargingwfl
Await rre earphone program is in ernn Use the chargerlocharwe
iunoiion is iaiiat aue man inaanecl DDerallon and reset the earphone
rhe earbuasm unsaltwenter Make sun that the Earbuds
painny made are Iuiiy charged
MFB (Multi Function Button)
LED indicator
Microphone
Micro USB charging port
Left ear hook
Right ear hook
rhe Earbuds
asninsi be
searched or
WW Ms Close ire aiuetaoih settings menu
on your phone and sun again
rre piuetisoin application
iannar locate the aamuas
@NP’QPP’NT‘
Make sure you charge your earbud: far at least] to 3
hours before using them for the first time.
U 9 the Earbuds
Answering a Call:
- A voice prompt "Incoming cal|"is heard . Click
The MulticFunction Button on either earbud to
answer the call.
Ending a Call
. Quick press the MulticFunction Button. A voice
prompt "Call Ended"will be heard.
Transfer a Call:
- During a call, press the Multi-Function Button on the
left earbud for approximately 2 seconds. Repeat
the operation to switch the audio between the
phone and the earbuds.
Muting Conversations:
- During a call, double-click the Multi-Function
Button on the left earbud. A voice prompt "Mute
ON"is heard, indicating that the mute function is in
operation.
Redial:
- Double press the Multi-Function Button on the left
earbud to call the last numberdialed. Press the
MulticFunction Button againt to release the call
Music Playback:
- When listening to your music playlist, quick press
Multi-Function Button on the left earbud to pause
the music. Quick press the MulticFunction Button
again to resume music playback.
Three-party (all:
- While on a call, ifa new call comes in, quickpress the
MulticFunction Button on the left earbud. Call A will
be placed on hold to answer the new call.
Doublecpress the MulticFunction Button tojoin calls A
and call B.
iOS battery level display:
- After the earphones are connected to the iOS, the
battery level is displayed next to the battery icon.
Ques ons and Customer Support
For further assistance or troubleshooting, please call
our customer support line:
‘3 Phone: 1c877c768c8481
Monday—Friday SAM-10PM (EST)
g www.southerntelecom.corn
Click on ”Product Support"
Legal Informa
READ CAREFULLY AND KEEPTHIS MANUAL
Caution: Any changes or modifications not expressly
approved could void the user's authority to operate the
equipment.
This device complies with Part 15 ofthe FCC Rules. Operation
is Subject to the following two conditions:
ll ) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undersired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part ‘I 5
of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. lfthis equipment does cause harmful interfer
ence to radio or television reception, which can be
determined byturning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
ofthe following measures:
. Reorient or relocate the receiving antenna.
-lncrease the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuitdifferent
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
m ed Warranty
90 Days Limited Warranty
In the unlikely event that this product is defective, or does
not perform properly, you may within ninety (90) days from
your original date of purchase return it to the authorized
service center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
0 Call the Customer Support number located below, or go
to our website portal to receive a SRO number.
0 Provide proof ofthe date of purchase within the package
(dated bill ofsalel.
o Prepay all shipping costs to the authorized service center,
and remember to insure your return.
0 Include a return shipping address (no PO. Boxes), a
telephone Contact number, and the defective unit within
the package.
- Describe the defect or reason you are returning the
product.
Your product will be repaired or replaced, at our option, for
the same or similar model of equal value ifexamination by
the service center determines this product is defective.
Products received damaged as a result of shipping will
require you to file a claim with the carrier.
The shipping address ofthe authorized service center is:
ss‘éi Customer Service Dept. 35
do Southern Telecom
400 Kennedy Drive
Sayreville, NJ 08872
should you have any questions or problems concerning this
product, please contact our customer service department at:
Customer Support:
‘3 Phone: 1-877-768-8481
Monday-Friday 8AM-‘IOPM(EST)
I www.southerntelecorrl.com
Click on "Product Support"
Warranty service not provided
This warranty does not cover damage resulting from
accident, misuse, abuse, improper installation oroperation,
lack of reasonable care, and unauthorized modification. This
warranty is voided in the event any unauthorized person
opens, alters or repairsthis product. All products being
returned to the authorized service center for repair must be
suitably packaged.
Limitation ofWarranty:
. THE WARRANTV STATED ABOVE is THE ONLY WARRANTV
APPLICABLETOTHIS PRODUCT ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE) ARE HEREBv DISCLAIMED. NO VERBAL OR
WRITTEN lNEORMATION GIVEN BY AIT, INC. lTS AGENTS, OR
EMPLOYEES SHALL CREATE A GUARANTV OR lN ANYWAY
INCREASE THE SCOPE OFTHIS WARRANTv.
- REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTV IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
AIT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEV
QUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT OR ARISING OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS
DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE
GOVERNED BYTHE LAWS OF THE STATE OF NEW YORK.
EXCEPTTO THE EXTENT PROHIBITED BY APPLICABLE LAW,
ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED
TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion nor limitation of
incidental orconsequential damages, or limations on how
long an implied warranty lasts sothe above limitations on
exclusions may not apply to you.This warranty gives you
specific legal rights, and you also may have other rights that
vary from state to state.
sharper image name and logo are Nfllskred rradenurks. mnvrurured
and marketed by saurhernretecom under license. 0 Sharon Int-tie.
All Rights Reserved.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2017:03:09 10:06:44+08:00
Create Date                     : 2017:03:09 10:06:35+08:00
Metadata Date                   : 2017:03:09 10:06:44+08:00
Creator Tool                    : Adobe Acrobat 7.0
Format                          : application/pdf
Document ID                     : uuid:73f81b69-5e65-4bba-aefa-67f0fdb5b5a3
Instance ID                     : uuid:0dd4cfec-3c2c-444b-b747-cc5e5c344975
Producer                        : Adobe Acrobat 7.0 Image Conversion Plug-in
Page Count                      : 1
Creator                         : Adobe Acrobat 7.0
EXIF Metadata provided by EXIF.tools
FCC ID Filing: YGKSTBT13

Navigation menu