ROULE ELECTRONICS RL-3976 Wireless door chime User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1770091
Application ID	Z3GkrcbntckNMckK35vhHQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	160.88kB (2011059 bits)
Date Submitted	2012-08-20 00:00:00
Date Available	2012-08-20 00:00:00
Creation Date	2012-08-14 14:40:21
Producing Software	Acrobat Distiller 9.4.6 (Windows)
Document Lastmod	2012-08-14 14:40:21
Document Title	Wireless_Door_Chime_with_Backlit_Design_MDC810B020712E.indd
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jamesd

Helpdesk / Technical Support Details
Swann Technical Support
All Countries E-mail: tech@swannsecurity.com
Telephone Helpdesk
AUSTRALIA toll free
USA toll free
1300 138 324
1-800-627-2799
(Su, 2pm-10pm US PT)
(M 9am-5pm AUS ET)
(Tu-F 1am-5pm AUS ET)
(M-Th, 6am-10pm US PT)
(Sa 1am-9am AUS ET)
(F 6am-2pm US PT)
NEW ZEALAND toll free
USA Exchange & Repairs
0800 479 266
1-800-627-2799 (Option 1)
UK
(M-F, 9am-5pm US PT)
0203 027 0979
See http://www.worldtimeserver.com for information on time zones and the
current time in Melbourne, Australia compared to your local time.
Warranty Information
Swann Communications USA Inc.
12636 Clark Street
Santa Fe Springs CA 90670
USA
Swann Communications
Unit 13, 331 Ingles Street,
Port Melbourne Vic 3207
Swann Communications LTD.
Stag Gates House
63/64 The Avenue
SO171XS
United Kingdom
© Swann Communications 2012
Swann Communications warrants this product against defects in workmanship and material for a period
of one (1) year from it’s original purchase date. You must present your receipt as proof of date of purchase
for warranty validation. Any unit which proves defective during the stated period will be repaired without
charge for parts or labour or replaced at the sole discretion of Swann. The end user is responsible for all
freight charges incurred to send the product to Swann’s repair centres. The end user is responsible for all
shipping costs incurred when shipping from and to any country other than the country of origin.
The warranty does not cover any incidental, accidental or consequential damages arising from the use of
or the inability to use this product. Any costs associated with the fitting or removal of this product by a
tradesman or other person or any other costs associated with its use are the responsibility of the end user.
This warranty applies to the original purchaser of the product only and is not transferable to any third
party. Unauthorized end user or third party modifications to any component or evidence of misuse or
abuse of the device will render all warranties void.
By law some countries do not allow limitations on certain exclusions in this warranty. Where applicable by
local laws, regulations and legal rights will take precedence.
For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to major failure.
FCC Verification
This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and the receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
WARNING: Modifications not approved by the party responsible for compliance could void user’s authority to
operate the equipment.
Wireless Door Chime
with Compact Backlit Design
MDC810B020712E
Operating Guide
Operating Guide
Thank you for choosing the Swann Wireless Doorbell.
It’s an ideal unit for easily installing a doorbell without
the hassle of wiring. Simply add some batteries,
mount the two pieces where needed and you are
ready to go! The doorbell features 16 chimes and two
levels of volume to suit your needs and can reach a
distance of up to 50m/approx 165ft when there are
Doorbell
Doorbell
no obstructions.
Receiver
Mounting the doorbell
(speaker)
The doorbell is mounted by simply sticking it to a wall using the included adhesive
strip(s).
• Peel off one side of the adhesive strip and attach it to the rear of the backing
plate, ensuring none of it is visible from the front.
• Find the area you want to mount the doorbell. Flat, smooth surfaces are ideal.
Make sure they are clean and dry before mounting.
• Peel off the other side of the adhesive strip and attach the doorbell to the
mounting surface.
Mounting the receiver (speaker unit)
There is no requirement to mount the receiver. You may find it more convenient to
place it on a shelf or table. One of the benefits of a battery operated wireless doorbell
is that if you have a large house, you can take the receiver with you. No more missing
visitors because you were all the way at the back of the house or by the pool!
If you would like to mount the device, you simply need to attach the two screws to
a wall. Place them level to each other, about 24mm / 15/16” apart. Depending on
the surface, you may need to drill guide holes and/or use masonry plugs or dry wall
anchors.
Do not insert the screws all the way. Leave about 7mm / ¼” protruding from the
wall. Then place the unit onto the screws, ensuring the heads of the screws pass
through the two mounting holes on the rear of the unit. You can then shift the unit
downwards to ensure it sits on the screws firmly.
Batteries (Receiver)
• The doorbell receiver unit requires 3 x AA batteries to operate (which are not
included). For best performance, use fresh, high quality AA alkaline batteries.
• To install them, unclip the battery cover on the rear of the unit to reveal the
battery compartment.
• The polarity of batteries is indicated by the markings inside the battery
compartment.
Batteries (Doorbell unit)
• The doorbell requires 1 x CR2032 battery (included).
• To access the battery, pry off the back cover using a small, flat-head screwdriver
in the small notch at the bottom of the doorbell.
• To finish, clip the back cover back onto the doorbell unit making sure the rubber
seal is fitted properly to ensure the unit remains water resistant.
Setting the volume and chime
• To change volume, press the volume button on the side of the receiver unit. This
switch toggles between High and Low volume.
• To change chimes, press the chime select button on the side of the unit. The unit
will play the next chime. Keep pressing the button until you hear a chime you
like. You do not need to confirm your selection. The chime playing is the chime
selected and the one which will be heard when the doorbell is pressed.
• The new chime sound will be set for the most recently pressed Doorbell.
If you’ve paired multiple Doorbells, then you can set the chime for each one
independently.
Volume button
Chime select
Pairing a Doorbell to the Receiver:
button
•
Press the Pairing Button on the
Pairing
Chime Unit. The button is small and
Button
recessed, so you’ll need a matchstick
or similar to press the button.
•
Press the button on the Doorbell Unit
•
The Doorbell is now paired with the
Chime unit. See above for instructions
on setting a chime sound specific to
that Doorbell.
WARNING: When fitting the screws into the wall, make sure you
are not inserting them anywhere near electrical wires, including
wires that may be behind the wall. If you are unsure at all, please
get a professional to check first and install the screws for you.
Operating current (receiver unit):
Operating current (doorbell unit):
Transmission Frequency:
Transmission Range:
Internal Sounds:
4.5V (3 x AA Batteries, not included)
3V (1 x CR2032 Battery, included)
433Mhz
Up to 50m/165ft
16 chimes
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2012:08:14 14:40:21+08:00
Create Date                     : 2012:08:14 14:40:21+08:00
Metadata Date                   : 2012:08:14 14:40:21+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Wireless_Door_Chime_with_Backlit_Design_MDC810B020712E.indd
Creator                         : jamesd
Document ID                     : uuid:ce48db2b-603e-4537-af74-7d4e92f1c194
Instance ID                     : uuid:28951917-8380-490e-9c98-14d468cb8db0
Producer                        : Acrobat Distiller 9.4.6 (Windows)
Page Count                      : 3
Author                          : jamesd

EXIF Metadata provided by EXIF.tools