RSI VIDEOTECHNOLOGIES CT01 Indoor Contact Transmitter User Manual DescriptionOfDevice ICT601

RSI VIDEOTECHNOLOGIES Indoor Contact Transmitter DescriptionOfDevice ICT601

DescriptionOfDevice_ICT601

• Wireless interactive technology• Magnetic door contact function• Universal wired input function• Dual tamper• Lithium powered - 4 years battery lifeDescriptionThe ICT Universal Door Contact is a battery operated, wireless door contact designed for use in Videofied® security systems. Door contacts are intended for use in detecting the opening and closing of doors, windows, or cabinet doors/drawers.The ICT consist of a switch detector with Wiselink - S2View® spread spectrum, Videofied, interactive, encrypted wireless circuitry for secure two-way communications with the control panel. A dual tamper function provides detection for both wall and cover tamper. The transmitter is typically installed on the stationary surface of an opening (door frame or window frame), while the magnet is installed on the door or window.With the door or window closed, the magnetic field forces a reed switch inside the detector to close, creating a secured condition. When the alarm system is armed and the door or window is opened, the detector transmits an open signal. The control panel receives this signal and responds according to system configuration/programming.The external input terminals accepts a normally closed or normally open remote switch. You can connect a dry closed circuit (no power) from standard hardwire intrusion or smoke detectors.The detector is powered by one lithium battery that can last up to four years, depending on the amount of detector activity. The detector transmits a check-in signal every eight minutes that includes its unique identification code along with the current alarm state, tamper conditions, serial number, date of manufacture, software version and battery status.Features> Wiselink - S2View® - Spread Spectrum, Videofied, Interactive, AES Encrypted Wireless technology provides optimum signal integrity and security.> Supervised - transmits a check-in/status signal every 8 minutes indicating open/closed state, tamper conditions, serial number, date of manufacture, software revision and battery status.> Dual tamper - provides detection for both wall and cover tamper.> External input - accepts normally closed (NC) or normally open (NO) dry (no power) circuits from standard hardwire intrusion devices, including fast response devices.> Lithium battery - up to four years battery life.ApplicationsResidential> Doors> Windows> Cabinet doors/drawers> Other similar openingsCommercial> Doors> Windows> Overhead garage doors> Cabinet doors/drawers> Other similar openingsINDOOR CONTACT TRANSMITTER ICT 200/601/702/800SPECIFICATION SHEETDOC. - REF. 229-ICTMODIF. DATE : FEBRUARY 2017VERSION : XX.XX.XX1
2www.videofied.comSPECIFICATION SHEET INDOOR CONTACT TRANSMITTER ICT 200/601/702/800Battery Type C - CR123A - 1 Lithium batteryNominal voltage 3 VLow battery limit 2.8 VEstimated battery life Up to 4 yearsCurrent consumptionStandby (1h average) 37 µAMax 35 mA (with alarm and communication)Internal detection I.L.S with provided Alnico magnetAxis of detection 3 axis (X, Y, Z)Opening detection distance 2.3 cm (axis Y & Z)1.4 cm (axis X )Closing detection distance 2 cm (axis Y & Z)1.2 cm (axis X )Initialization time 10sRecovery time 2sExternal detection Wired inputMax wire length 16mInput type NC or NO (recorded during detection test)DETECTION PROPERTIESRF Wiselink - S2View® technologyRadio type Spread spectrum RF bidirectionalOperating frequency• 868MHz - ICT200 (Europe, Africa, Asia)• 915MHz - ICT601 (Americas)• 920MHz - ICT702 (Australia, South America)• 902/907.5 MHz & 915/928 MHz - FHSS - ICT800 (Brazil)Transmission security AES algorithm encryptionSupervision Radio, batteries, tamperRadio antenna IntegratedRADIO PROPERTIESPanel compatibility W, X and VISIO panelsELECTRICAL PROPERTIES BOXPhysical propertiesMaterial ABS UL94-V0Dimensions 79.3 mm x 35 mm x 24.6 mmWeight 32 g (without battery)Shock & water protection markings IP30/IK04Installation / MountingMounting support Non-ferromagnetic surface (ex : wood)Wall mounting 2 screwsBox sealing 1 screwEnvironmental propertiesOperating temperature -10°/+55°CMax relative humidity 75%, without condensingSTANDARDS AND CERTIFICATIONS868MHz (ICT 200)Compliant with the annex IV of the R&TTE Directive 1999/5/ECEN 60950-1 2006 +/A11:2009+/A1:2010+/AC:2011+/A12:2011+/A2:2013EN 62311 2008EN 55032 2014EN 301489-1 V1.9.2 ; EN301489 V1.6.1EN 300220-2 V2.4.1902/928 MHz (ICT 601)USA FCC Part 15CCanada IC RSS-247 Issue 1915/928 MHz (ICT 702)Australia RCM AS/NZS4268TamperTamper detection Cover and wall tamper 902/907.5MHz & 915/928MHz (ICT 800)BrazilEste equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.

Navigation menu