RTX America RTX3080 RTX3080 User Manual

Download:
Mirror Download [FCC.gov]
Document ID	601062
Application ID	K+6Mqto2AdN53VUocMIDug==
Document Description	UserMan2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.82kB (72750 bits)
Date Submitted	2005-11-10 00:00:00
Date Available	2005-11-10 00:00:00
Creation Date	2005-11-09 15:03:43
Producing Software	Acrobat Distiller 7.0 for Macintosh
Document Lastmod	2005-11-10 14:06:02
Document Title	untitled

ENGLISH
F C C A N D O T H E R I N F O R M AT I O N
This equipment complies with Parts 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA).
A plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.
An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines.
See Installation Instructions in the user’s manual. This equipment may not be used with Coin Telephone
Lines or with Party Lines. If you have specially wired alarm dialing equipment connected to your
telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you
have questions about what will disable alarm equipment, consult your telephone company or a qualified
installer.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Privacy of communications
may not be ensured when using this phone.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet or on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC RF EXPOSURE WARNING
To insure the safety of users, the FCC has established criteria for the amount of radio frequency energy
various products may produce depending on their intended usage. This product has been tested and
found to comply with the FCC’s exposure criteria. For body worn operation, the FCC RF exposure
guidelines were also met when used with the accessories supplied or designed for this product. Use of
other accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided.
Caution: To maintain compliance with the FCC’s RF exposure guidelines, the internal antennas used for
this mobile transmitter (Base unit) must provide a separation distance of at least 20 cm from all persons.
Base and Handset must not be co-located or operating in conjunction with any other antenna or transmitter.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this device.
■
33
USER MANUAL
ENGLISH
RIGHTS OF THE TELEPHONE COMPANY
Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be
required. Where prior notice is not practical and the circumstances warrant such action, the telephone
company may temporarily disconnect service immediately. In case of such temporary discontinuance,
the telephone company must:
1. Promptly notify you of such temporary discontinuance;
2. Afford you the opportunity to correct the situation;
3. Inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in
Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its facilities, equipment, operations, or procedures that
could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
PRODUCT IDENTIFIER AND REN INFORMATION
The label on the back or bottom of this equipment contains, among other things, an identifier indicating
product approval and the Ringer Equivalence Number (REN). This information must be provided to
your local telephone company upon request. For equipment approved prior to July 23, 2001, the product
identifier is preceded by the phrase “FCC Reg No.” and the REN is listed separately. For equipment
approved after that date, the product identifier is preceded by “US” and a colon (:), and the REN is encoded in the product identifier without a decimal point as the sixth and seventh characters following the
colon. For example, the product identifier US:AAAEQ03T123XYZ would indicate an REN of 0.3.
The REN is used to determine how many devices you may connect to your telephone line and still have
them ring when you are called. In most, but not all areas, the sum of all RENs should be five (5.0) or less.
OTHER NOTES:
• This equipment may not be used on coin service provided by the telephone company.
• Connection to party line service is subject to state tariffs. Contact the state public utility commission,
public service commission or corporation commission for information.
• If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this cordless phone does not disable your alarm equipment. If you have questions about
what will disable alarm equipment, consult your telephone company or a qualified installer.
• Notice must be given to the telephone company upon permanent disconnection of your telephone
from your line.
HEARING AID COMPATIBILITY
This equipment is hearing aid compatible as defi ned by the FCC in 47 CFR Section 68.316.
HEALTH AND SAFETY INFORMATION FCC
Exposure to Radio Frequency (RF) Signals
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies:
■
34
USER MANUAL
The standards include a substantial safety margin designed to assure the safety of all persons, regardless
of age and health. The exposure standard for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC and Canada is 1.6W/kg
*.(W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to
give additional protection for the public and to account for any variations in.
RF EXPOSURE FCC
Tests for SAR are conducted using standard operating positions specified by the FCC with the phone
transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operation can be well
below the maximum value. This is because the phone is designed to operate at multiple power levels so
as to use only the power required to reach the network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested and certified to the FCC that
it does not exceed the limit established by the government-adopted requirement for safe exposure. The
tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the
FCC for each model. (Body-worn measurements may differ among phone models, depending upon
available accessories and FCC requirements). The highest SAR value for this phone when tested for use
at the ear is 0.085 W/kg, and when worn on the body is 0.021 W/kg for 1.5cm distance. (Body worn
measurements differ among phones depending upon available accessories and the FCC requirements.)
While there may be differences between the SAR levels of various phones and at various positions, they
all meet the government requirement for safe exposure.
For body worn operation, to maintain compliance with FCC RF exposure guidelines, use only accessories that contain no metallic components and provide a separation distance of 15mm (0.6 inches) to the
body. Use of other accessories may violate FCC RF exposure guidelines and should be avoided.
CORDLESS TELEPHONE PRIVACY
Cordless telephones are radio devices. Communications between the handset and base of your cordless
telephone are accomplished by means of radio waves which are broadcast over the open airways. Because of the inherent physical properties of radio waves, your communications can be received by radio
receiving devices other than your own cordless telephone unit. Consequently, any communications using
your cordless telephone may not be private.
PROGRAMMING AND TESTING OF EMERGENCY NUMBERS
If this product has memory dialing locations, you may choose to store police, fire department and emergency medical service telephone numbers in these locations. If you do, please keep three things in mind:
1.
2.
3.
It is recommend that you also write the telephone number on the directory card, so that you can still
dial the emergency number manually if the memory dialing feature doesn’t work.
This feature is provided only as a convenience, and the manufacturer assumes no responsibility for
customer reliance upon the memory feature.
Testing the emergency telephone numbers you have stored is not recommended. However, if you do
make a call to an emergency number:
■
35
USER MANUAL
ENGLISH
This EUT has been shown to be capable of compliance for localized specific absorption rate (SAR) for
uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992
and had been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65
Supplement C (2001) and IEEE Std. 1528-2003 December 2003).
■
36
USER MANUAL
ENGLISH
• You must remain on the line and briefly explain the reason for the call before hanging up.
• Programming/testing of emergency numbers should be performed during off-peak hours, such
as in the early morning or late evening, when the emergency services tend to be less busy.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 4
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:7e6d6679-468f-4a7a-a59c-8bbdb26385a0
Modify Date                     : 2005:11:10 14:06:02+01:00
Create Date                     : 2005:11:09 15:03:43+01:00
Metadata Date                   : 2005:11:10 14:06:02+01:00
Document ID                     : uuid:5577cb09-978a-434a-afd4-a2d13ccfcb02
Format                          : application/pdf
Title                           : untitled
Producer                        : Acrobat Distiller 7.0 for Macintosh

EXIF Metadata provided by EXIF.tools