Contents
- 1. User Manual
- 2. Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3508550 |
| Application ID | 1+vAYKNj7ryZJ80+8sSkWw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 42.06kB (525718 bits) |
| Date Submitted | 2017-08-11 00:00:00 |
| Date Available | 2017-08-11 00:00:00 |
| Creation Date | 2017-07-07 14:05:50 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2017-08-11 13:09:21 |
| Document Title | Users Manual |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | SZ_195 |
Quick Reference Guide Front View Package Contents: - RTX8162EX - Battery - Belt clip - Pull cord - This Reference Guide To use the RTX8162EX for the first time: - Open the battery lid; - Remove the plastic strip from the battery contacts - Close the battery lid; - Place the RTX8162EX on the chargedr to fully charge the battery Main Menu Items Contacts Central Directory Calls Settings Calendar Accessories Messaging Top Line Icons Signal Strength Battery Status Missed Call Caller Filter Silenced Locked Ring Pull Cord Message Voice Mail Alarm Set USB GETTING STARTED Turning the RTX8162 Ex on and off Press and hold for a few seconds. Activating your phone When the display of your phone is dark, press any key to activate your phone (phone in Idlemode). Lock/Unlock your phone In Idle mode press and then phone. To unlock your phone press (toggle function) or press “Key Lock” on the side of the and then (toggle function). Make a call In Idlemode: 1. 2. 3. 4. Press and then type the number you want to reach. Press and then type the number you want to reach (speakerphone call) Type the number you want to reach and then press or Use a speed dial key ( … or 5. Press soft key , or or , select the required contact and press soft key Answering an incoming call Press or, for speakerphone call, End a call Press OR OR OR OR Ma ake an enq quiry call Durring a call,, press and dial the numbe er of the pa arty you want to consult. Pres ss toggle between the two o parties. Press t transferr the call. to to Change the volume Durring a call,, press “Vo olume Up p” or “Volu ume Dow wn” on the e side of th he phone. Use the Spea aker phon ne Durring a call,, press ; to de-ac ctivate: prress aga ain. Mu ute the mic crophone during a call Press the sofft key . To turn the micro ophone on again, pre ess the so oft key Mu ute the mic crophone during a call In Idlemode for a few w seconds s. , press and hold Notte: You ma ay need to o enter your voicemail numbe er in the ha andset setttings firstt. Wrrite and se end a text message In Idlemode , press , use the navigation keys to select and press the sofft key , then key n enter the e text of your messa age. 1. Press soft OR 2. Use the navigation keys to o select a stored dra aft messag ge and pre ess soft ke ey The en press so oft key , selec ct the type e of the me essage (no ormal or u urgent) and choose the required desttination(s)). When “message sent” is given in the e display y your messa age has be een sen ntsuccessfu ully. Ass signing a contact to o a speed dialling ke ey In Idlemode , press sofft key and d press sofft key , select the contact you want to assign a speed dialling key . Choose and press soft key to scroll to th he approprriate numb ber (2..9) and press s soft key . Use e the navigation key ys Ma ake a shortcut In Idlemode , press , use the navigation keys to select and press s soft key . Use the navigatio on keys to select (S Shortcuts)). Now you u can assign a functtion to one e of the nav vigation ke eys or func ction keys s. Register the e handset In Idlemode , press , use the navigation keys to select and press s soft key . Use the navigatio on keys to select (Connectiivity) and press softt key . Use th he navigatiion (Regis key ys to select ster) and press softt key Entter the req quested registration informatio on (contac ct your Sy ystem Adm ministrator for this). Wait for the registratio on to be co ompleted. Using the me enu In Idlemode , press to access s the main menu. Us se the nav vigation ke eys to go to t the required men nu, menu tab and menu item. Use soft key ( or press ) to se elect the osen menu u or menu item/tab. Other sofft keys ma ay provide additiona al options. cho To go back one step in the menu u or leave altogether, press Me enu list 1. Contacts 2. Feedback Central Diirectory 3. Settings (continued) List of o contacts Selec ct required con ntact by name Calls All Calls ered Calls Answe Generral Settings Silent Time & Date Security Phone Lock matic Key Lock Autom Chang ge PIN Proxy Password Wallpape er Startup Sc creen Power Save Backlight Charger B Units Mode Answer M Caller Filter Emergen ncy Call Numberr Message SOS Key Man Dow wn Pull Cord Voicemaill Number Silent Cha arging Missed Ca all Time Connectiivity Handset Name Register RFID er Deregiste Reset Settings Select Ne etwork Bluetooth Enabled/Disabled Search ffor Devices Paired D Devices Status Incoming Calll Grou up Ring Interrcom Ring Emergency Ring Arb. Ring Incre easing Ring 5. Notiffication Volum me Notification Normal/Urgen t/Emergency Incre easing Notifica ation Vibra ator Alerts Alert Vo olume Alert Melody Increas sing Alert Vibrator Calendar 6. 7. Manage yo our appointme ents Accessories Vibrrator Message Nottifications Ring Volume Ring External/Interrnal/Unknown Charger Warning Noise Red duction Sounds ds Normal & So ounds Silent Shortcuts (for the navigatio on keys) LED Signal ED Red LE Green LED w LED Yellow Blue LED Cove erage Warning Calls Language (Su upported: English, Spanish, German, French, Italian, Dutch, Danish, Swedish, Turrkish, Polish, Norwegian, Grreek & Russian n) Conffirmation Sound Settings Display Missed d Calls Key Sound Dialled d Calls 4. Alarms Calcula ator Stopwa atch Messaging Drafts Inbox ges Sent Messag Settings Additional Information for RTX8162 EX Regulatory information ATEX compliance information The RTX8162 EX complies with: IEC/EN60079-0 and IEC/EN60079-11 with marking I M2 Ex ib I Mb II 2G Ex ib IIC T4 Gb II 2D Ex ib IIIC T135C Db -10C ~ +50C IP65 Um = 5.25VDC CE0035 Presafe 17 ATEX 9520 X IECEx PRE 17.0011X The symbol X placed after the certification number indicates that during the use of the handsets the following conditions shall be met: 1. Do not sink the device in oil or hydraulic fluid 2. Protect your device from aggressive liquids and vapors 3. In the case of suspected damage, do not use the device in hazardous zone Handset Product Markings The RTX8162 ExDECT handset is a powerful communication tool and with it’sEx design aimed to be used in hazardous area. The RTX8162 ExDECT handset is certified with the protection level “High protection” for use in zone 1 & 2 (Gas), in zone 21 & 22 (Gas) and in De-energized Ex atmosphere (Mining). The following Handset product markings will apply for Europe and EFTA. Important safety information Only use batteries marked with”RTX8162 EX ” Do not use any battery WITHOUT marked “RTX8162 EX” Since this may present a risk of leakage, fire, explosion or other hazardous situation. Do not replace battery in hazardous area* For battery replacement or removal, please do it outside hazardous area. After replacement of battery outside hazardous area, make sure the battery knob on battery has correctly and completely locked into the handset before going into hazardous area. Never disassemble, customize or short-circuit batteries Charge the battery or handset only outside of the hazardous areaand only in combination with the Gx66/I766 EnhDesktop ChargerwithGx66 AC Adapter – Europlugor Gx66 AC Adapter – Multi Regionor with the Gx66/I766 Enh Multi Charger Rack with Gx66 AC Adapter -Multi Charger Rack. Plug the Gx66 AC Adapter – Europlug, Gx66 AC Adapter – Multi Regionor the Gx66 AC Adapter -Multi Charger Rackin a wall outlet socket near the equipment for easy access/removal of the AC/DC adaptor. *For more information or enquiries on hazardous area, please contact and consult your supplier or the local authorities for proper use of the product. Important battery information This product uses rechargeable Lithium-lon batteries (Cell model no.: LP553450SI - Li-ion 3.7V 1100mAh 4.2Wh). RTX8162 EX Only use batteries that come with the handset or dedicated spare batteries marked with RTX816x Ex Battery Pack. - Do not use any other type, since this may present a risk of leakage, fire, explosion or other hazardous situation. - Never disassemble, customize or short-circuit batteries. - Do not place battery in fire or heat the battery. - Charge the battery or handset outside hazardous area* and only in combination with the Gx66/I766 Enh Desktop Charger with Gx66 AC Adapter – Europlug or Gx66 AC Adapter – Multi Region or with the Gx66/I766 Enh Multi Charger Rack with Gx66 AC Adapter -Multi Charger Rack. *For more information or enquiries on hazardous area, please contact and consult your supplier or the local authorities for proper use of the product. Sensitive Electronic Equipment Any radio-based equipment can potentially cause interference with other equipment and can be interfered from other equipment. This also applies for DECT equipment. However due to the very low transmission power level the chances for interference are very small. Research proves that operational DECT phones normally don’t influence electronic equipment however some precautions must be taken into account for sensitive electronic equipment e.g. sensitive laboratory equipment. When DECT phones operate in straight nearness of sensitive electronic equipment incidental influence can appear. You are advised not to place the DECT phone on or close (less than 10cm) to this kind of equipment, even in standby mode. Please also use the other documentation supplied with the various parts of your telephone system. Product disposal information For countries in the European Union Be sure to dispose of these products as well as its packing material in an environmentally compatible way. Electrical equipment, including the battery, should not be disposed of as municipal waste. These products should be taken to a designated facility where the best available treatment, recovery and recycling techniques are available. At www.nec-enterprise.com/About-NEC/Environment/Green-policy-148 you can find information about separate disposal and environmentally sound recycling For countries outside the European Union Disposal of electrical and electronic products in countries outside the European Union should be done in line with the local regulations. If no arrangement has been made with your supplier, please contact the local authorities for further information Battery disposal information Defect or exhausted batteries should never be disposed of as municipal waste. Return old batteries to the battery supplier, a licensed battery dealer or a designated collection facility. Do not incinerate batteries. Original Manufacturer: RTX Hong Kong Ltd. 8/F Corporation Square, 8 Lam Lok Street, Kowloon Bay, Hong Kong Model: RTX8162 EX SAFETY AND REGULATORY INSTRUCTIONS Alcatel-Lucent 8262EX DECT Handset English Safety Instructions This approved DECT telephone is intended to be used for industrial applications in hazardous atmospheres of up to zone 2 (gas, vapors and mists) with an Alcatel-Lucent PBX. The following conditions must be respected, notably concerning the use of radioelectric frequencies: Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user's authority tooperate the equipment. To limit the risk of interference, people with pacemakers must keep the wireless telephone away from their equipment (minimum distance of15 cm/6 inches). It is recommended to follow the standard acceptance procedures before using this equipment in human safety critical areas (hospitals...). DECT equipment can only be used to establish links between fixed points if these links are temporary. The conditions of access to a DECT equipment telepoint network shall be stipulated by contract with the operator of the authorized telepointnetwork concerned. Switch off the telephone before changing the battery. You must not switch on or use your telephone near gas or inflammable liquids. The handset includes magnetic elements that may attract sharp metallic objects. CAUTION:There is a danger of explosion if the battery is replaced incorrectly. Use only recommended battery RTX816x EX Battery Pack (3BN67361AA, Cell model no.: LP553450SI - Li-ion 3.7V 1100mAh 4.2Wh). Be sure to dispose of these products as well as its packing material in an environmentally compatible way. Electrical equipment, including the battery, should not be disposed of as municipal waste. These products should be taken to a designated facility where the best available treatment, recovery and recycling techniques are available. The mains power socket used must be close to the charger/holder and easily accessible, so that it can be used as an 'on/off' facility. Charge the battery for about 6 hours before initial use. The 8262 DECT Handset desktop Dual charger (3BN67346AA), is dedicated for 8262 EXDECTHandsets(3BN67345AA) and needs thefollowing Power Supply Units: PSU Europe (3BN67335AA) - TenPao (Model S005AYV0500100) – efficiency level VI (rating I/P:AC 100-240V, 0.2A; O/P: DC 5V, 1A). - Friwo FW7713/XX – efficiency level V (rating I/P:AC 100-240V, 150mA; O/P: DC 5V, 1A). PSU WW (3BN67336AA) - TenPao (Model S008ACM0500100 with UK,US,AUS plugs) – efficiency level VI (rating I/P:AC 100-240V, 0.3A; O/P: DC 5V, 1A). - Friwo FW7712 - efficiency level V (rating I/P:AC 100-240V, 125mA; O/P: DC 5V, 0.9A). The 8262 DECT Handset Rack Charger (3BN67351AA) will use a dedicated PSU: - 8262 Dect handset PSU WW for rack charger (3BN67353AA) - Ten Pao (Model S030ABM0500500) – efficiency level VI (rating I/P: AC 100-240V, 1A; O/P: DC 5V, 5A). - Friwo FW7540/05 (rating I/P:AC 100-240V, 600mA; O/P: DC 5V, 5A). With the 8262EX DECT Handset, use only Bluetooth devices marked with the ATEX logo, usable in an ATEX (potentially explosiveatmosphere) area. Never charge or install the battery in an ATEX (potentially explosive atmosphere) area. Regulatory Statements This equipment uses DECT frequency range that depends on country: 1880 - 1900 Mhz in Europe, 1920 - 1930 MHz in US/Canada, 1910 -1930 MHz in LATAM, 1910 - 1920 MHz in Brazil. The equivalent isotropically radiated power at the antenna is less than 110 mW or 250 mW (itdepends on the country). This equipment offers also Bluetooth® Interface: frequency range 2402-2480 MHz, Radiated Power 1.72 mW. EUROPE This equipment is in compliance with the essential requirements of RED Directive 2014/53/EU (from 13 June 2017), ATEX Directive 2014/34/EU and with ROHS Directive 2011/65/UE. The Declaration of Conformity may be obtained from: ALE International 32 avenue Kléber – 92700 Colombes, France ebg_global_supportcenter@al-enterprise.com USA and Canada Handset: this device complies with Part 15 of the FCC Rules and with RSS of Industry Canada (FCC ID: T7HCT816X ,IC: 4979BCT816X). Thisdevice complies with Part 68 of the FCC Rules and with IC CS-03 Part V of Industry Canada. Chargers: this device complies with Part 15-B of the FCC Rules and with ICES-003 of Industry Canada. FCC Caution Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be co-located or opera ting in conjunction with any other antenna or transmitter. Privacy Privacy of communications may not be ensured when using the Bluetooth® handset or any additionnal Bluetooth® device. Exposure to Radio Frequency Signals. This device has been designed and manufactured not to exceed the SAR (Specific Absorption Rate) radio frequency power transmission limitsestablished by the different countries concerned. The SAR value measured is equal to 0.089 W/kg (the globally accepted maximum limit being1.6 W/kg). User Instructions Only use the handset in temperatures between -10°C to +50°C (14°F to 122°F). Only charge the battery at temperatures between +5 °C and +45 °C (41 °F and 113 °F). Acoustic shock protection Maximum sound pressure level for handset is compliant with European, US and Australian standards. Directive 2003/10/EC specifying the risks inherent in noise at work The ring contributes towards overall daily noise. To reduce the level, the following is recommended: reduce the setting, program a progressivering. Disposal: The equipment must be returned to a collection point for electronic equipment waste disposal. Defective batteries must be returned to a collection point for chemical waste disposal. Related Documentation: Other languages for these Safety and Regulatory Instructions and User Documentation are available at the following Web site:http://enterprise.alcatel-lucent.com?product=All&page=Directory. ATEX compliance information The 8262EX complies with IEC/EN60079-0 and IEC/EN60079-11 with marking I M2 Ex ib I Mb II 2G Ex ib IIC T4 Gb II 2D Ex ib IIIC T135C Db -10C ~ +50C IP65 Um = 5.25VDC CE0035 Presafe 17 ATEX 9520 X IECEx PRE 17.0011X The symbol X placed after the certification number indicates that during the use of the handsets the following conditions shall be met: 1. Do not sink the device in oil or hydraulic fluid 2. Protect your device from aggressive liquids and vapors 3. In the case of suspected damage, do not use the device in hazardous zone ISEDC statement This device complies with Innovation, Science, and Economic Development Canad licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. ISEDC SAR Waring The device has been tested and compliance with SAR limits, users can obtain Canadian information on RF exposure and compliance Le présent appareil est conforme Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantes CS03 Warning This product meets the applicable Innovation, Science, and Economic Development Canad technical specifications. Le présent matériel est conforme aux specifications techniques applicables d’ Innovation, Sciences et Développement économique Canada.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : SZ_195 Create Date : 2017:07:07 14:05:50+08:00 Modify Date : 2017:08:11 13:09:21-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : Microsoft Word - 3.user manual-ok,转PDF注意格式 Creator : SZ_195 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2017:08:11 13:09:21-07:00 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:1ede5ae1-a715-4e3c-a853-80a8f88b7224 Instance ID : uuid:51cfdf23-5ef9-49e8-953d-44a14bfdbf7b Page Count : 9EXIF Metadata provided by EXIF.tools