RTX RTX8630 DECT 6.0 Handset User Manual Users manual
RTX Hong Kong Ltd. DECT 6.0 Handset Users manual
RTX >
Users manual
AdditionalhandsetinformationRTX8630
Importantsafetyinformation
Charge the battery or handset only in combination with RTX8630 DECT Handset Desktop Charger and the Ten Pao S008CM0550060 or
Phihong PSAC05R-055(RT)-R adapter that comes with the product.
Plug the Ten Pao S008CM0550060 or Phihong PSAC05R-055(RT)-R AC/DC adaptor in a wall outlet socket near the equipment for easy
access/removal of the AC/DC adaptor.
Importantbatteryinformation
This product uses rechargeable Lithium-Ion batteries 3.7V, 1100mAh. Only use batteries that come with the handset or dedicated spare batteries
marked with “Battery Pack, CE-MB206-5C-01 or BL-5C-Y01”. Do not use any other type, since this may present a risk of leakage, fire, explosion or
other hazardous situation. For battery replacement or removal please remove the battery cover of the handset. Never disassemble, customize or short-
circuit batteries. Do not place battery in fire or heat the battery. Charge battery only with RTX8630 Charger and the
Ten Pao S008CM0550060 or
Phihong PSAC05R-055(RT)-R
adapter that comes with the product.
SensitiveElectronicEnvironment
Any radio-based equipment can potentially cause interference with other equipment and can be interfered from other equipment. This also applies for
DECT equipment. However due to the very low transmission power level the chances for interference are very small. Research proves that
operational DECT phones normally don’t influence electronic equipment however some precautions must be taken into account for sensitive
electronic equipment e.g. sensitive laboratory equipment. When DECT phones operate in straight nearness of sensitive electronic equipment
incidental influence can appear. You are advised not to place the DECT phone on or close (less than 10cm) to this kind of equipment, even in standby
mode. Please also use the other documentation supplied with the various parts of your telephone system.Menulist
Productdisposalinformation
For countries in the European Union
The symbol depicted here has been affixed to your product in order to inform you that electrical and electronic products should not be disposed
of as municipal waste.
Electrical and electronic products including the cables, plugs and accessories should be disposed of separately in order to allow proper treatment, recovery
and recycling. These products should be taken to a designated facility where the best available treatment, recovery and recycling techniques are available.
Separate disposal has significant advantages: valuable materials can be re-used and it prevents the dispersion of unwanted substances into the municipal
waste stream. This contributes to the protection of human health and the environment.
Please be informed that a fine may be imposed for illegal disposal of electrical and electronic products via the general municipal waste stream. In order to
facilitate separate disposal and environmentally sound recycling, arrangements have been made for local collection and recycling. In case your electrical
and electronic products need to be disposed of please refer to your supplier or the contractual agreements that your company has made upon acquisition of
these products.
For countries outside the European Union
Disposal of electrical and electronic products in countries outside the European Union should be done in line with the local regulations. If no arrangement
has been made with your supplier, please contact the local authorities for further information.
Battery disposal information
Defect or exhausted batteries should never be disposed of as municipal waste. Return old batteries to the battery supplier, a licensed battery dealer or a
designated collection facility. Do not incinerate batteries.
RegulatoryinformationEurope
Declaration of conformity
Česky
“RTX Telecom” tímto prohlašuje, že tento “RTX806x/RTX808x” je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Dansk
Undertegnede “RTX Telecom” erklærer herved, at følgende udstyr “RTX806x/RTX808x” overholder de væsentlige krav og øvrige relevante krav i direktiv
1999/5/EF.
Deutsch
Hiermit erklärt “RTX Telecom”, dass sich das Gerät “RTX806x/RTX808x” in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen
Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti
Käesolevaga kinnitab “RTX Telecom” seadme “RTX806x/RTX808x” vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele
teistele asjakohastele sätetele.
English
Hereby, “RTX Telecom”, declares that this “RTX806x/RTX808x” is in compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC.
Español
Por medio de la presente “RTX Telecom” declara que el “RTX806x/RTX808x” cumple con los requisitos esenciales y cualesquiera otras disposiciones
aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η “RTX Telecom” ∆ΗΛΩΝΕΙ ΟΤΙ
“RTX806x/RTX808x”
ΣΥΜΜΟΡΦΩΝΕΤΑΙ
ΠΡΟΣ
ΤΙΣ
ΟΥΣΙΩ∆ΕΙΣ
ΑΠΑΙΤΗΣΕΙΣ
ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ
∆ΙΑΤΑΞΕΙΣ
ΤΗΣ
Ο∆ΗΓΙΑΣ
1999/5/ΕΚ.
Français
Par la présente “RTX Telecom” déclare que l’appareil “RTX806x/RTX808x” est conforme aux exigences essentielles et aux autres dispositions pertinentes
de la directive 1999/5/CE.
Íslenska
Hér með lýsir “RTX Telecom” yfir því að “RTX806x/RTX808x” er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.
Italiano
Con la presente “RTX Telecom” dichiara che questo “RTX806x/RTX808x” è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite
dalla direttiva 1999/5/CE.
Latviski
Ar šo “RTX Telecom” deklarē, ka “RTX806x/RTX808x” atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių
Šiuo “RTX Telecom” deklaruoja, kad šis “RTX806x/RTX808x” atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Malti
Hawnhekk, “RTX Telecom”, jiddikjara li dan “RTX806x/RTX808x” jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC
Magyar
Alulírott, “RTX Telecom” nyilatkozom, hogy a “RTX806x/RTX808x” megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb
elõírásainak.
Nederlands
Hierbij verklaart “RTX Telecom” dat het toestel “RTX806x/RTX808x” in overeenstemming is met de essentiële eisen en de andere relevante bepalingen
van richtlijn 1999/5/EG.
Norsk
“RTX Telecom” erklærer herved at utstyret “RTX806x/RTX808x” er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.
Polski
Niniejszym, “RTX Telecom” deklaruje, ze “RTX806x/RTX808x” jest zgodny z wymaganiami i innymi warunkami Dyrektywy 1999/5/EC.
Português
“RTX Telecom” declara que este “RTX806x/RTX808x” está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko
“RTX Telecom” izjavlja, da je ta “RTX806x/RTX808x” v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky
“RTX Telecom” týmto vyhlasuje, že “RTX806x/RTX808x” spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi
“RTX Telecom” vakuuttaa täten että “RTX806x/RTX808x” tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin
muiden ehtojen mukainen.
Svenska
Härmed intygar “RTX Telecom” att denna “RTX806x/RTX808x” står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta
bestämmelser som framgår av direktiv 1999/5/EG.
Intendeduse
These phones are designed for use with an RTX IP DECT phone network. Any other use is considered unintended use. Unauthorized modifications or
reconstructions not described in the Quick Reference Guide are not permitted.
RTX Telecom A/S
Stroemmen 6
9400 Noerresundby
Denmark
RegulatoryinformationUnitedStates
Interference information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by RTX Telecom could void the user’s authority to operate the equipment.
Privacy of communications may not be ensured when using this equipment.
ExposuretoRadioFrequency(RF)Signals
This wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency
(RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and
establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and
international standards bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and
health. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
This product has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population
exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OET
Bulletin 65 Supplement C (2001) and IEEE 1528-2003”
For body worn operation, this handset has also been tested and meets the FCC RF exposure guideline when used with the RTX Telecom belt clip supplied
for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
HearingAidCompatibility(HAC/VC)
This handset meets the FCC standard for Hearing Aid Compatibility.
Regulatory information
Canada
Industry Canada (I.C.) Notice
Avis d’Industrie Canada
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device. Privacy of communications may not be ensured when using this phone.
Son fonctionnement est soumis aux deux conditions suivantes : (1) Ce dispositif téléphonique ne doit pas causer d’interférences et (2), il doit pouvoir
accepter les interférences, incluant celles pouvant nuire à son fonctionnement normal. L’utilisation de ce téléphone ne garantit pas la confidentialité de vos
communications.
This Class B digital apparatus complies with canadian ICES-003
CET appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.
This product meets the applicable Industry Canada technical specifications.
Le présent materiel est conforme aux specifications techniques applicables d’Industrie Canada
RF Exposure Information
This product complies with FCC and IC radio frequency exposure limits under the following conditions:
-The base must be placed to allow at least 20 cm (8 inches) between the antenna and all persons during normal operation.
-The base must not be collocated or operated in conjunction with any other antenna or transmitter.
-The handset is designed for body-worn operation and meets FCC RF exposure guidelines when used with any belt clip, carrying case, or other accessory
supplied with this product. (All necessary accessories are included in the package; any additional or optional accessories are not required for compliance
with the guidelines.) Use of other accessories might not comply with FCC or IC RF exposure guidelines.
Renseignements relatifs aux expositions RF
Cet appareil est conforme aux limites d'exposition établies par la FCC et est soumis aux conditions suivantes :
-Le socle doit être installé de manière à permettre un minimum de 20 cm (8 po) entre l'antenne et les personnes pendant l'opération normale.
-Le socle ne doit pas être coimplanté ou utilisé conjointement avec une autre antenne ou transmetteur.
-Pour le fonctionnement lorsque l’appareil est porté sur le corps, les directives se rapportant à la quantité d’énergie RF mises de l’avant par la FCC ont
également été respectées lorsque l’appareil a été utilisé conjointement avec les accessoires Uniden inclus ou conçus pour celui-ci. L’utilisation d’autres
accessoires peut ne pas garantir la conformité avec les directives de la FCC relativement à l’exposition aux fréquences radio et devrait être évitée.
Hearing Aid Compatibility (HAC/VC):
Compatibilité aux appareils auditifs (HAC/VC)
This unit’s handset meets both FCC and IC CS-03 issue 9 Part V standards for Hearing Aid Compatibility.
Le combiné de cet appareil est confirme aux normes de la FCC et des normes standard CS-03 parution 9,partie V d’Industrie Canada, relative à la
compatibilité avec les appareils auditifs.