RTscan Technology RT9X0 Portable data terminals User Manual RT920

Download:
Mirror Download [FCC.gov]
Document ID	3256921
Application ID	rpAh4RBgpsjM36sgZTYWMA==
Document Description	User Manual_Rev1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	87.11kB (1088862 bits)
Date Submitted	2017-01-12 00:00:00
Date Available	2016-07-29 00:00:00
Creation Date	2016-12-16 10:32:33
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-12-16 10:32:33
Document Title	Microsoft Word - RT920 User manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	toby81818

RTSCAN TECHNOLOGY LIMITED
RT920 User Guide
1. Front view
LED Indicator
RT920 USER GUIDE
Touch screen
Key pad
Switch on: Hold power button until device switches on.
Switch off: Hold power button keep until the device shows the menu (as shown in
figure), select "Power off".
Switch off display: Press the power button once or set the auto sleep option at
"Setting -> Display -> Sleep"
Wake up: When the display is off, press power button once to turn on the display.
RTSCAN TECHNOLOGY LIMITED
2. Side view
3.5 mm earphone port
Mini USB port
Power button
RT920 USER GUIDE
Scan button
Scan button
User-defined button
Volume control
Reset button
Barcode Scanner
POGO pin
RTSCAN TECHNOLOGY LIMITED
3. Back view
Camera
Battery cover
Loudspeaker
RT920 USER GUIDE
SIM slot
lock
TF Card slot
RFID card induction area
U-style strap: remove by pulling
the strap downward
RTSCAN TECHNOLOGY LIMITED
RT920 USER GUIDE
RTSCAN TECHNOLOGY LIMITED
Removing battery
Switch to ‘unlock’ position and use the strap buckle to raise the battery cover, as
shown below.
RT920 USER GUIDE
Battery installation
Insert the battery into the battery
compartment in the direction as
shown in image right. Battery
should sit tightly in the compartment
when correctly installed. Do not use
excessive force to insert the battery.
RTSCAN TECHNOLOGY LIMITED
Battery charging
Charge by DC power adapter
RT920 USER GUIDE
To plug in the power adapter connector into the DC power port on the terminal
device. Red color LED indicates battery is charging, green color LED indicates
battery is fully charged.
DC power adapter
USB data communication cable
Charging by dock
Insert the device to the dock and make the battery proper contact with the
charging dock, like the picture below.
RTSCAN TECHNOLOGY LIMITED
A: Power LED
B: Charging status LED
Power LED will turn green after inserting the adapter. Charging status LED
will show RED when charging and turn green when fully charged. The LED in
device will show red and turn off after fully charged.(Notice: USB in device only for
data transfer)
RT920 USER GUIDE
Battery operation
This device battery is polymer type battery, which should only be charged by
using original RTscan power supply.
Do not short the battery
Do not store battery in hot, humid, or corrosive environment.
Do not break or crack open the battery.
Do not store battery when it is fully charged completely drained.
If device is not used for long period of time, remove the battery from the
device.
If battery is misshapen, or is found leaking, replace the battery immediately.
Note: The battery should be charged for at least 8 hours before the first use.
RTSCAN TECHNOLOGY LIMITED
INSTALLING THE SIM/TF CARD
1. Swing open the main battery cover clip by 90 degree; you can then remove
the battery cover
2. Insert the SIM card or micro SD/TF card into their corresponding slots in the
battery compartment
RT920 USER GUIDE
Notice: You should gently push the SIM/TF card to the correct position without
using excessive force.
Connecting to PC
After you installed the android driver or an android smartphone assistant, you
can connect the device to your PC with the USB cable provided. After the device
connected to your PC, the screen would display like this:
Select this option to
enable / disable device
as USB storage to the
PC
After the device
connected to your PC,
you could drag the top
part of the screen
down,to show the USB
options.
Select this option to
enable / disable USB
debugging
RTSCAN TECHNOLOGY LIMITED
Check this to enable
Check this to enable
device as a USB
USB debugging
storage to PC
RT920 USER GUIDE
Note: When you enable device as USB storage to PC, the flash memory of the
device are map as a PC drive. At this point of time, you cannot install
APK to the device.
To install APK to the device, it should not be in USB storage mode.
More images view of the terminal:
RTSCAN TECHNOLOGY LIMITED
RT920 USER GUIDE
For any question, please contact: support@rtscan.net
10
RTSCAN TECHNOLOGY LIMITED
RT920 USER GUIDE
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
Interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
The SAR limit adopted by USA and Canada is 1.6 watts/kilogram (W/kg)
averaged over one gram of tissue. The highest SAR value reported to the
Federal Communications Commission (FCC) and the Industry Canada (IC) for
this device type when it is tested for use at the head is 0.471W/kg, and that
when it is properly worn on the body is 0.441 W/kg.
The device complies with the RF specifications when the device is used near
your ear or at a distance of 0 mm from your body. Ensure that the device
accessories
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : toby81818
Create Date                     : 2016:12:16 10:32:33+08:00
Modify Date                     : 2016:12:16 10:32:33+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 11.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - RT920 User manual.doc
Creator                         : toby81818
Document ID                     : uuid:1025173b-349c-41b2-9bbb-79947f682a76
Instance ID                     : uuid:e72a0f08-b732-488f-b5ad-3471f941010c
Page Count                      : 11

EXIF Metadata provided by EXIF.tools