Racing Electronics SWITCH SWITCH User Manual Manual Switch v2

Racing Electronics SWITCH Manual Switch v2

User manual

www.RacingElectronics.com1-800-272-7111 Avoid Hearing DamageTo prevent possible hearing damage, do not use the SWITCH at high volume for a long period of time and always lower the volume level of the device you connect to the SWITCH Audio Input port before connecting.Model : SWITCH and SWITCH RACER.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation.WARNING: Modification of this device to receive cellular radio telephone service signals is prohibited under FCC rules and Federal Law.The complete declaration is available online at: www.racingelectronics.comPower On/Off ButtonVolume or Channel Up/Down ButtonsProgramming ButtonChannel 1 Preset ButtonChannel 2 Preset ButtonScanning modes ButtonIN (Auxiliary Audio Input), OUT (Earphone Jack)Channel or Sub Channel IndicatorChannel Number DisplayVolume Level BarsCommunication IndicatorLow Battery IndicatorFrequency DisplayPreset or Scan Mode Selection Indicator127345689101112131412734 5 68 9 10 11 121314WZ5-SWITCHFCC ID:
OPERATION MODES PROGRAMMING STEPS1212SCANSCAN452.4000CH 193454.0000CH 800454.0000CH 321454.0000CH 8001454.0000CH 800ScanningPress to scan between Preset 1 and 2.Scanning with PriorityHold and then press or at the same time to set the preset 1 or 2 as a priority on the scanning process.The preset 1 or 2 selection indicatoris blinking when the priority is set. Channel 1 Preset ListeningPress to hold on the preset 1 channel.Long press to display the preset 1 sub channel info on the display.Channel ProgrammingLong Press on the Prog .The channel number is blinking.Navigate through the ChannelsScroll up or down withto select a channel.Long press to skip up by 100.Press Prog for sub channel programming or long press on or to save the frequency as a preset 1 or 2.Save Channel and Exit Programming ModeLong Press on or to save the frequency as a Preset 1 or 2.Exit programming mode by pressing the Prog .Navigate through the Sub ChannelsScroll up or down withto select a sub channel.Long press to skip up by 10.Note: OFF = Not ConsideredChannel 2 Preset ListeningPress to hold on the preset 2 channel.Long press to display the preset 2 sub channel info on the display.ProgProgProg454.0000CH 800454.0000CH 023SUB12454.0000CH OFFSUB11111123422222SCANSCAN

Navigation menu