Rad Data Comm 4 Wire Symmetrical Vdsl Modem Asm 60 Users Manual

2015-02-06

• Front Cover
• Quick Start Guide
  • Installing ASM-60
    • Setting the Internal Switches
    • Connecting the Interfaces
    • Connecting the Power
  • Operating ASM-60
    • Normal Indications
  • Configuring ASM-60
    • Selecting the Data Rate
• Table of Contents
• Chapter 1. Introduction
  • Overview
    • Versions
    • Application
    • Features
      • DTE Interface
      • Management
      • Test Capabilities
      • Real Time Alarms
      • Statistics Collection
  • Physical Description
  • Functional Description
  • Technical Specifications
• Chapter 2. Installation and Setup
  • Site Requirements and Prerequisites
  • Package Contents
  • Installation and Setup
    • Performing the Internal Settings
      • Opening the ASM-60 Case
      • Closing the ASM-60 Case
    • Connecting the Interfaces
      • Connecting the Line
      • Connecting the DTE
    • Connecting the Power
• Chapter 3. Operation
  • Front Panel Indicators
  • Operating ASM-60
    • Turning On ASM-60
    • Normal Operation
    • Normal Indications
    • Turning Off ASM-60
• Chapter 4. Management from a Terminal
  • Preparing for the Control Session
    • Control Port Interface Characteristics
    • Preparing Terminal
      • Control Port Handshaking Protocol
      • Initiating a Control Session
  • Initiating a Control Session
    • Terminal Management Menus
  • Starting the Control Session
  • Configuring ASM-60
    • Selecting the Data Rate
  • Displaying the ASM-60 System Information
    • Displaying the ASM-60 Status
  • Resetting ASM-60
• Chapter 5. Diagnostics
  • Error Detection
    • Power-Up Self-Test
    • Front-Panel LEDs
    • Alarms
      • Working with the Temporary Alarms Buffer
      • Working with the Log File
  • Displaying the VDSL Performance Diagnostics
  • Running the Diagnostic Tests
    • Running the LEDs Test
• Appendix A. IR-ETH Interface Module
  • IR-ETH Connector Options
  • Technical Specifications
  • Installation and Operation
    • DIP Switch Settings
    • LED Indicators
    • Connecting to LAN
• Appendix B. IR-ETH/QH Interface Module
  • Introduction
  • IR-ETH/QH Connector
  • Technical Specifications
  • Installation and Operation
    • Setting the DIP Switch
    • LED Indicators
    • Connecting the LAN
• Appendix C. IR-IP Interface Module
  • Introduction
    • Overview
    • Application
  • Technical Specifications
  • Physical Description
    • IR-IP LEDs
    • IR-IP DIP Switch
  • IR-IP Management Subsystem, General
    • Introduction
    • Accessing the IR-IP Management Subsystem
    • Default IP Communication Parameters
  • Performing Preliminary Configuration
    • General
    • Outline of Preliminary Configuration
    • Connecting the Telnet Host
    • Preliminary Telnet Host Configuration
    • Assigning the Router LAN Interface Address
      • IP Learning Mechanism
      • Assigning a LAN IP Address to a New IR-IP
      • Changing the LAN IP Address of a Configured IR-IP
      • What to Do If ...
  • IR-IP Management Utility
    • General Operating Procedures
    • Starting a Management Utility
    • Menu Structure of Management Utility
  • Quick Setup Menu
    • LAN IP Address
    • LAN IP Mask
    • WAN IP Address
    • WAN IP Mask
    • Default Gateway
      • Operation without Default Gateway
      • Operation with Default Gateway
    • Read Protocol from DIP Switches
    • Protocol
  • Management Access Menu
    • Telnet Password
    • Telnet Inactivity Timeout
  • Advanced Setup Menu
    • Device Identification Menu
      • Device Name
      • Contact Person
      • System Location
    • Interface Parameters Menu
      • LAN Status
      • WAN Status
      • WAN Throttle
      • Aging Timeout
    • WAN Protocol Parameters – Frame Relay Protocol Me
      • Self Learn
      • Maintenance Protocol
      • DLCI
      • CIR
      • EIR
    • WAN Protocol Parameters – PPP Protocol Menu
      • Header and Control Field Compression
      • Protocol Field Compression
      • Authentication Protocol
      • Security Host/Guest
      • User Name To Send
      • Password To Send
      • User Name To Accept
      • Password To Accept
    • Multicast IP Menu
      • Multicast Forwarding
      • Static Groups
  • Device Control Menu
    • New Software Download Menu
      • Server IP Address
      • File Name
      • Total Timeout
      • Start Operation
    • View Error Log Screen
    • Resets Menu
      • Reset Device
      • Reset LAN
      • Reset WAN
  • View Menu
    • Configuration and Connection
    • ARP Tables
    • Multicast Groups Table Screen
    • Statistics Screen
  • Diagnostic Tool (Ping Terminal) Menu
    • Using the Ping Function
  • Erasing User’s Configuration
  • Erasing IR-IP Software
    • Erasing Application Software
    • Downloading New Software
• Customer Response Form
• Back Cover