NSXN1B102X00XXEN
2016-11-13
: Radiall Nsxn1B102X00Xxen NSXN1B102X00XXEN nsx builder
Open the PDF directly: View PDF 
.
Page Count: 2
20.955
.825
20.955
.825
81.915
3.225
CODE **
SEE NOTE 1
3,18 (.125)
166,09
(6.528)
(6.965)
3,68 (.145)
(4 PLACES)
9,78 (.385)
9,53 (.375)
4,67 (.184)
4,78 (.188) 3,43 (.135) 7,19 (.283)
7,44 (.293)
3,84 (.151)
17,55 (.691)
17,45 (.687)
165,81
176,91
(6.995)
16,38 (.645)
16,64 (.655)
28,19 (1.110)
177,67
(6.539)
27,69 (1.090)
(6.345)
161,42
161,16
(6.355)
Estimated weight : 134 g
Page
Issue:
TECHNICAL DATA SHEET
Issue Revisions
Sep. 18, 2014
PEN:
/
NSXN1B102X00**
60 - 60 - BLANK INSERTS
Approved
4112_9311
NSXN1B102X00XXEN
/
Series
NSX
APPR.:
DATE:
NOM:
DIMENSIONS : mm (inch are given for information only)
RADIALL PROPRIETARY INFORMATION
/
RAMOS D.
Sep. 18, 2014 /
CREATION
This information is given as an indication.In the continual goal to improve our products,we reserve the right to make any modifications judged necessary.
ZUNIGA F.
/
Name
1/2
NON ENVIRONMENTAL SIZE 1 PLUG CONNECTOR
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from RADIALL
R
M
4-40 UNC
THREADED
INSERTS
(6 PLACES)
NSXN1B102X00** - - - -
14,00 (.551)
(2.504)
13,69 (.539)
63,91
63,60
4,95 (.195)
(2.516)
5,21 (.205)
(6.559)
166,90
166,60
(6.571)
1,40 (.055)
1,65 (.065)
161,54
165,10 max
29,97 (1.180)
30,23 (1.190)
3,05 (.120)
3,30 (.130)
(6.500 max)
(3.431)
87,05
(6.360)
161,29
(3.427)
87,15
(6.350)
(.620 min)
15,75 min
NOTE 1 :
** REPRESENTS THE POLARIZATION CODE AND IS CONFORM WITH ARINC 600 POLARIZATION POSITION
WITHOUT POLARIZATION CODE, THE CONNECTOR IS DELIVERED WITH POLARIZATION HARDWARE UNASSEMBLED
CODE 00 : THE CONNECTOR IS DELIVERED WITHOUT POLARIZING KEY
MATERIAL :
- SHELL : DIE CAST ALUMINUM ALLOY PER SAE AMS-QQ-A-591
- INSERT RETENTION PLATES : ALUMINUM ALLOY PER ASTM B 209
- POLARIZING RETENTION PLATE : ALUMINUM ALLOY PER SAE AMS-QQ-A-250
- POLARIZING POST : ZINC ALLOY PER ASTM B 86
- 60 INSERTS : REINFORCED EPOXY RESIN PER ASTM D 5948 OR HIGH GRADE THERMOPLASTIC
- BLANK INSERT : ALUMINUM ALLOY PER SAE AMS-QQ-A-250
- CONTACT RETENTION CLIPS : BERYLLIUM COPPER PER ASTM B 194
- COVER : THERMOPLASTIC ELASTOMER
- SCREWS AND WASHERS : CORROSION RESISTANT MATERIAL
FINISH :
- SHELL : ELECTROLESS NICKEL PER SAE AMS-2404
- INSERT RETENTION PLATES : ELECTROLESS NICKEL PER SAE AMS-2404
- POLARIZING RETENTION PLATE : ELECTROLESS NICKEL PER SAE AMS-2404
- POLARIZING POST : ELECTROLESS NICKEL PER SAE AMS-2404
- BLANK INSERT : ELECTROLESS NICKEL PER SAE AMS-2404
NOTES :
- INSERT LAYOUT :
CAVITY A : 60 FOR REAR RELEASE, REAR REMOVABLE SIGNAL CONTACTS
CAVITY B : 60 FOR REAR RELEASE, REAR REMOVABLE SIGNAL CONTACTS
CAVITY C : BLANK
- CONNECTOR SUPPLIED WITHOUT CONTACT
COVER P/N : 620995001 & 620995002 (INSTALLED)
- MARKING : CONNECTOR AND PACKAGING MUST BE MARKED WITH : NSXN1B102X00** + DATE CODE
(CODE ** : SEE NOTE 1 PAGE 1)
4112_9311
Page
Issue:
TECHNICAL DATA SHEET
NSXN1B102X00**
NSXN1B102X00XXEN
2/2
Sep. 18, 2014
RADIALL PROPRIETARY INFORMATION
This information is given as an indication.In the continual goal to improve our products,we reserve the right to make any modifications judged necessary.
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from RADIALL
