NSXN3P357S00XXEN
2018-06-08
: Radiall Nsxn3P357S00Xxen NSXN3P357S00XXEN nsx builder
Open the PDF directly: View PDF 
.
Page Count: 2
16,38 (.645)
16,64 (.655)
49,40 (1.945)
49,66 (1.955)
82,42 (3.245)
83,19 (3.275)
9,53 (.375)
9,78 (.385)
161,16
(6.355)
(6.345)
161,42
3,18 (.125)
3,43 (.135) 7,19 (.283)
7,44 (.293)
165,81
(6.539)
(6.528)
166,09
176,91
(6.995)
(6.965)
177,67
4,67 (.184)
4,78 (.188)
53,98
(2.135)
(2.125)
54,23
73,18 (2.881)
73,43 (2.891)
69,78 (2.747)
69,88 (2.751)
3,68 (.141
14 PLCS
3,84 (.151)
20,955
,825
20,955
,825
81,915
3,225
18,542
,730 18,542
,730
CODE **
SEE NOTE 1
V
87,05
(3.431)
(3.427)
87,15
1,40 (.055)
1,65 (.065)
3,05 (.120)
3,30 (.130)
29,97 (1.180)
30,23 (1.190)
161,29
(6.360)
(6.350)
161,54
165,10 max
(6.500 max)
15,75 min
(.620 min)
NSXN3P357S00** - - - -
NSXN3P357S00** - - - -
NSXN3P357S00** - - - -
NSXN3P357S00** - - - -
NOTE 1 :
** REPRESENTS THE POLARIZATION CODE AND IS CONFORM WITH ARINC 600 POLARIZATION POSITION
WITHOUT POLARIZATION CODE, THE CONNECTOR IS DELIVERED WITH POLARIZATION HARDWARE UNASSEMBLED
SEE NOTE 1
M
R
Page
PagePage
Page
Issue:
Issue:Issue:
Issue:
TECHNICAL DATA SHEET
TECHNICAL DATA SHEETTECHNICAL DATA SHEET
TECHNICAL DATA SHEET
Issue
IssueIssue
Issue Revisions
RevisionsRevisions
Revisions Approved
ApprovedApproved
Approved
4112_9311
4112_9311
4112_9311
4112_9311
NSXN3P357S00**
NSXN3P357S00**NSXN3P357S00**
NSXN3P357S00**
SIZE 3 PLUG CONNECTOR
SIZE 3 PLUG CONNECTOR SIZE 3 PLUG CONNECTOR
SIZE 3 PLUG CONNECTOR
/
//
//
//
/
NSXN3P357S00XXEN
NSXN3P357S00XXENNSXN3P357S00XXEN
NSXN3P357S00XXEN
Series
SeriesSeries
Series
NSX
NSXNSX
NSX
APPR.:
APPR.:APPR.:
APPR.:
DATE:
DATE:DATE:
DATE:
NOM:
NOM:NOM:
NOM:
PEN:
PEN:PEN:
PEN:
CREATION
CREATIONCREATION
CREATION
/
//
/
LEGENDRE
LEGENDRELEGENDRE
LEGENDRE
AUG. 03, 2004
AUG. 03, 2004AUG. 03, 2004
AUG. 03, 2004 /
//
/
Name
NameName
Name
This information is given as an indication.In the continual goal to improve our products,we reserve the right to make any modifications judged necessary.
This information is given as an indication.In the continual goal to improve our products,we reserve the right to make any modifications judged necessary.
This information is given as an indication.In the continual goal to improve our products,we reserve the right to make any modifications judged necessary.
This information is given as an indication.In the continual goal to improve our products,we reserve the right to make any modifications judged necessary.
MULTICONTACT CONNECTORS
MULTICONTACT CONNECTORSMULTICONTACT CONNECTORS
MULTICONTACT CONNECTORS
R
MACARI
MACARIMACARI
MACARI /
//
/
DIMENSIONS : mm (inch) -
DIMENSIONS : mm (inch) -DIMENSIONS : mm (inch) -
DIMENSIONS : mm (inch) -
1/2
1/21/2
1/2
AUG. 03, 2004
AUG. 03, 2004AUG. 03, 2004
AUG. 03, 2004
MATERIAL:
- SHELL : DIE CAST ALUMINUM ALLOY PER QQ-A-591, A380
- INSERT RETENTION PLATES : ALUMINUM ALLOY PER SAE AMS-QQ-A-250
- POLARIZING RETENTION PLATE : ALUMINUM ALLOY PER SAE AMS-QQ-A-250
- POLARIZING POST : ZINC ALLOY PER ASTM-B-86
- INSERTS : REINFORCED EPOXY RESIN PER ASTM-D 5948
- C4 INSERTS : FRONT PLATE : THERMOPLASTIC PER MIL-M-24519
REAR PLATE : STAINLESS STEEL PER ASTM-582-M-95b, TYPE 303
- CONTACT RETENTION CLIPS : BERYLLIUM COPPER PER ASTM-B-194
- CONTACTS :
BODY : BERYLLIUM COPPER PER ASTM-B-196 AND LEADED NICKEL COPPER (C97)
PROTECTIVE SLEEVE : STAINLESS STEEL PER SAE AMS-5514
- COVER : THERMOPLASTIC ELASTOMER
- SCREWS AND WASHERS : CORROSION RESISTANT MATERIAL
FINISH:
- SHELL : CHROMATATION PER MIL-C-5541, CLASS 3
- INSERT RETENTION PLATES : BLUE ANODIZED PER MIL-A-8625
- POLARIZING RETENTION PLATE : CHROMATATION PER MIL-C-5541, CLASS 3
- POLARIZING POST : YELLOW CHROMATE OVER CADMIUM PER QQ-P-416, TYPE II
- CONTACT BODY : PLATING .00005 INCH OF GOLD PER MIL-G-45204 TYPE I OR II GRADE C OR D CLASS 1 OVER NICKEL
PER QQ-N-290
- CONTACT PROTECTIVE SLEEVE : PASSIVATED
NOTES:
- INSERT LAYOUT : CAVITY A C4 FOR COAX CONTACTS
CAVITY B C4 FOR COAX CONTACTS
CAVITY C 13C2 FOR POWER AND COAX OR TRIAX CONTACTS
CAVITY D 150 FOR SIGNAL CONTACTS
CAVITY E 150 FOR SIGNAL CONTACTS
CAVITY F 100 FOR SIGNAL CONTACTS
- CONNECTOR SUPPLIED WITH:
400 SIZE 22 CRIMP PIN CONTACTS P/N : 620 200 (UNINSTALLED)
4 SIZE 20 CRIMP SOCKET CONTACTS P/N : 620 310 (UNINSTALLED)
3 SIZE 16 CRIMP SOCKET CONTACTS P/N : 620 330 (UNINSTALLED)
4 SIZE 12 CRIMP SOCKET CONTACTS P/N : 620 340 (UNINSTALLED)
COVER P/N : 620 995 005 & 620 995 006 (INSTALLED)
- MARKING : CONNECTOR AND PACKAGING MUST BE MARKED WITH : NSXN3P357S00** + DATE CODE
- PART IDENTIFICATION SHALL BE CAPABLE OF MEETING THE MARK DURABILITY REQUIREMENTS
OF DMS 2325 PARAGRAPH 4.2.7 FOR SKYDROL DMS 2014 TYPE 4 USING THE ABRASIVE FELT ONLY
Page
PagePage
Page
Issue:
Issue:Issue:
Issue:
TECHNICAL DATA SHEET
TECHNICAL DATA SHEETTECHNICAL DATA SHEET
TECHNICAL DATA SHEET
4112_9311
4112_9311
4112_9311
4112_9311
NSXN3P357S00**
NSXN3P357S00**NSXN3P357S00**
NSXN3P357S00**
AUG. 03, 2004
AUG. 03, 2004AUG. 03, 2004
AUG. 03, 2004 2/2
2/22/2
2/2
NSXN3P357S00XXEN
NSXN3P357S00XXENNSXN3P357S00XXEN
NSXN3P357S00XXEN
This information is given as an indication.In the continual goal to improve our products,we reserve the right to make any modifications judged necessary.
This information is given as an indication.In the continual goal to improve our products,we reserve the right to make any modifications judged necessary.
This information is given as an indication.In the continual goal to improve our products,we reserve the right to make any modifications judged necessary.
This information is given as an indication.In the continual goal to improve our products,we reserve the right to make any modifications judged necessary.
MULTICONTACT CONNECTORS
MULTICONTACT CONNECTORSMULTICONTACT CONNECTORS
MULTICONTACT CONNECTORS
R
