Radiant Sensors RSPOS-100 POS RFID Barcode Encoder Scanner User Manual

Radiant Sensors LLC POS RFID Barcode Encoder Scanner

User manual

RSPOS-100
UHF RFID POS Scanner
User Manual
WWW.RADIANTSENSORS.COM
POS UHF RFID SCANNER
© 2015 Radiant Sensors. All Rights Reserved. This information is subject to change without notice. Contact us for availability.
This document is to serve as a guide on how to setup and work with Radiant Sensors POS UHF RFID
SCANNER. It will provide useful information on how to connect and operate POS UHF RFID SCANNER.
Read it carefully before and during using POS UHF RFID SCANNER. Keep this user manual handy for
future use.
POS UHF RFID SCANNER
© 2015 Radiant Sensors. All Rights Reserved. This information is subject to change without notice. Contact us for availability.
Feedback from User
Thanks for using POS UHF RFID SCANNER. As always, our goal is to make your experience the best
possible ever, and your constructive comments and feedback are highly appreciated. Share your
thoughts, comments, suggestion and ideas with us. Tell us what you like or dislike about software,
hardware and even the datasheet of POS UHF RFID SCANNER. You can contact us by any of the
following ways, we look forward to hearing from you.
Address
Contact Details
340 S. Lemon Ave
Suite 9605
Walnut, CA 91789
USA
Toll Free: 888-557-9109,
Overseas: +1-213-985-7310,
sales@Radiantsensors.com
For more information visit http://www.radiantsensors.com.
POS UHF RFID SCANNER
© 2015 Radiant Sensors. All Rights Reserved. This information is subject to change without notice. Contact us for availability.
Copyright
© All rights reserved. The software, hardware and document of POS UHF RFID SCANNER contain
proprietary information of Radiant Sensors that is provided under a license agreement containing
restrictions on use and disclosure, and are also protected by copyright. Reverse engineering,
disassembly or de-compilation of the device is prohibited.
Information contained in this document is subject to change without notice. If you find any problems
in the document, please write them to us. In your license agreement, it is expressly stated that no part
of the software and hardware of the device may be reproduced or transmitted in any form, by any
means, electronic or mechanical for any purpose without the expressed written permission of Radiant
Sensors.
Limitation of Liability
In no event shall Radiant Sensors be liable for any damages whatsoever (damages for loss of business
profits, business interruption, loss of business information or any other pecuniary loss ,without
limitation) arising out of the use of, or inability to use this device.
The content of this document is furnished for informational use only. It is subject to change without
notice, and should not be construed as a commitment by Radiant Sensors. Radiant Sensors assumes
no responsibility or liability for any errors or inaccuracies that may appear in this manual. Neither
Radiant Sensors nor anyone else who has been involved in creating, producing or delivering this
document shall be liable for any indirect, incidental, special, exemplary or consequential damages. But
not limited to any loss of anticipated profit or benefits, resulting from the use of this documentation
or sample code.
Intellectual Property
Radiant Sensors may have patents, patent applications, trademarks, copyrights, or other intellectual
property rights covering subject matter in this document. Except as expressly provided in any written
license agreement from Radiant Sensors, the furnishing of this document does not give you any
license to these patents, trademarks, copyrights, or other intellectual property.
POS UHF RFID SCANNER
© 2015 Radiant Sensors. All Rights Reserved. This information is subject to change without notice. Contact us for availability.
Warranty Product
Warranty is valid for 12 months.
Warranty only applies to manufacturing defect in materials and malfunctions.
Damage caused by misuse, abuse, neglect, alteration, problems with electrical power, usage
not in accordance with product instructions, acts of nature, or improper installation or repairs
made by anyone other than Radiant Sensors authorized third-party service provider is not
covered under warranty.
Warranty does not cover freight cost for both ways.
POS UHF RFID SCANNER
© 2015 Radiant Sensors. All Rights Reserved. This information is subject to change without notice. Contact us for availability.
Contents
FEEDBACK FROM USER ..................................................................................................................................................... 3
COPYRIGHT ..................................................................................................................................................................... 4
Limitation of Liability ............................................................................................................................................................ 4
Intellectual Property ............................................................................................................................................................. 4
WARRANTY PRODUCT ...................................................................................................................................................... 5
CONTENTS ...................................................................................................................................................................... 6
POS UHF RFID SCANNER ...........................................................................................................................................7
FEATURES ....................................................................................................................................................................... 7
APPLICATIONS ................................................................................................................................................................. 8
SPECIFICATIONS ............................................................................................................................................................... 8
CLOSER VIEW .................................................................................................................................................................. 9
SAMPLE USAGE ............................................................................................................................................................... 9
SETUP .......................................................................................................................................................................... 10
Single Scanning Mode .......................................................................................................................................... 10
Continuous Scanning Mode ................................................................................................................................. 10
RECORDS OF REVISION ................................................................................................................................................... 11
POS UHF RFID SCANNER
© 2015 Radiant Sensors. All Rights Reserved. This information is subject to change without notice. Contact us for availability.
POS UHF RFID SCANNER
POS UHF RFID SCANNER is a new data capturing device from Radiant
Sensors which is designed to grab EPC of RFID tags and deliver that
data securely to a host for processing. It renders superior performance
and read reliability for a wealth of applications; with incredible speed
and at an economical price point.
Snap-On installation along with exceptional ergonomic design has
made POS UHF RFID SCANNER literally convenient to setup and
comfortable to use. In press of a button POS UHF RFID SCANNER can
toggle between two scanning modes to read RFID tags individually or
continuously. With its high RF sensitivity that provides for greater
accuracy, higher throughput and longer reads, you can readily know
the detailed information of the packages without unpacking or
opening the container.
POS UHF RFID SCANNER reaches further to bring reliable data about
your products right to your fingertips.
Features
Snap - On installation
Driver free setup eliminates integration with any software or hardware
Orientation insensitive design resulting in faster and more accurate tag reads
Single or Continuous scanning modes
Fast read rate for demanding applications
Region free application
Best-in-class receive sensitivity
Enhanced interference rejection
Expansive read range settings
Rugged yet compact and lightweight for effortless use
Superior ergonomic design for both left and right handed user
USB 2.0 for power and communication line
IP41 sealing for dust and water resistance
POS UHF RFID SCANNER
© 2015 Radiant Sensors. All Rights Reserved. This information is subject to change without notice. Contact us for availability.
Applications
Any applications requiring a reliable and easy UHF
RFID tag scanning
Retail POS
Hypermarket
Pharmacy & Healthcare
Warehouse
Receiving/Shipping
Product authentication
Office
Specifications
Dimensions
(H × W × L) 3.34 × 3.46 × 6.73 in ( 8.5 × 8.8 × 17.1 cm)
Weight
150 g
Storage Temperature
-10 °C to +70 °C
Humidity Operating Range
Up to 80% relative humidity
Material
ABS
Colour
Lava
Ingress Protection
IP41
Input Voltage
5 VDC
Input Current
500 mA @ 5VDC
Power Connector
USB 2.0
Connectivity
USB 2.0
Operating Modes
Single Scan
Continuous Scan
Communication Standards
USB 2.0
Operating System
Windows, MAC, Linux, Android
Nominal Read Range
10-15 cm
Frequency Range
Region Free
Supported Standards
EPC Gen 2
RFID Antenna Type
Integrated, Orientation Insensitive
POS UHF RFID SCANNER
© 2015 Radiant Sensors. All Rights Reserved. This information is subject to change without notice. Contact us for availability.
Closer View
No.
Description
1
Scanning Area
2
Activity Indicator LED
3
Activation/Toggle Button
Sample Usage
1
2
USB 2.0
3
ERP, WMS, CSM and the like
POS UHF RFID SCANNER
© 2015 Radiant Sensors. All Rights Reserved. This information is subject to change without notice. Contact us for availability.
Setup
As mentioned earlier, POS UHF RFID SCANNER is quiet easy to setup and exploit. No driver is needed
to be installed before using it. Just plug the USB cable into USB port and that’s all. POS UHF RFID
SCANNER is now ready. POS UHF RFID SCANNER can be used in two different modes; Single Scanning
and Continuous Scanning.
Single Scanning Mode
In this mode POS UHF RFID SCANNER reads a single tag with each press of activation/toggle button.
The EPC of the tag is then sent to the host through USB port.
Continuous Scanning Mode
To use POS UHF RFID SCANNER in Continuous Scanning mode, press activation/toggle button and hold
it for more than 1 second. Keep holding the button and POS UHF RFID SCANNER continually reads in
range tags and sends their EPC to the host through USB port.
POS UHF RFID SCANNER
© 2015 Radiant Sensors. All Rights Reserved. This information is subject to change without notice. Contact us for availability.
Records of Revision
This page keeps the records of changes to this document. The document was originally released as
Revision A.
REV
NAME
DESCRIPTION OF REVISION
DATE
A
R.PRS
Initial Release
2015-11-14
POS UHF RFID SCANNER
© 2015 Radiant Sensors. All Rights Reserved. This information is subject to change without notice. Contact us for availability.
Radiant Sensors is addressing challenges of global intricacy in
today’s omnipresent digital devices, affording its customers to
create novel experiences for end users.
Radiant Sensors designs, develops, and manufactures passive
and active RFID hardware products as well as IOT sensor
devices for short and long range wireless identification
technology.
Radiant Sensors is positioned as a major player in the
worldwide market for sub gigahertz UHF (Ultra-High
Frequency) and Active radio-frequency identification (2.45
GHz) technologies. Our devices are field proven and have
been in operation for many years throughout the world.
Toll Free: 888-557-9109
Overseas: +1-213-377-5745
Www.Radiantsensors.Com
Email: Sales@Radiantsensors.Com
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Navigation menu